Indian Institute of Technology Roorkee
29th June - 2nd July 2017

  
Call for Tutorial 
 
Researchers, academicians and professionals are invited to present full day (6 hrs) or half day (3 hrs) tutorials at VDAT-2017. 
 
Tutorial Topics (not limited to)
  • Circuit and Device Interaction.  
  • Emerging Devices and Technologies.  
  • Digital, Analog / Mixed Signal circuit Design.  
  • VLSI Technology.  
  • Memories.  
  • Optoelectronics.  
  • Modeling and Simulation of Devices, Circuit and Systems.  
  • Sensor / MEMS.  
  • CAD for VLSI.  
  • Organic Electronics.  
  • VLSI System Level Design VLSI Architecture. 
Submission Details  
 
  • Title of the tutorial : The title will appear in the symposium program if the proposal is accepted. 
  • Abstract of the tutorial : This abstract will be used to advertise the proposal, for instance, on the symposium’s web site prior to the symposium. The abstract should be 250 words long at the most. 
  • Proposed duration : Half-day tutorials will run for a total of about 3 hours; full day tutorials will run for about 6 hours.  
  • Prerequisite knowledge : What the attendees should already know.  
  • Detailed outline : The topics covered in the tutorial will be listed and briefly discussed in the outline, along with the amount of time planned for each topic. This should be limited to 2500 words.  
  • Tutorial goals : This is a short message on the tutorial’s goals and benefits to prospective participants. 
 
Background information of the presenter(s) should be limited to 1-2 pages and contain   
Names, affiliations, homepages and contact details.  
Short biographies including related recent publication.  
Information about previous tutorials given by the same presenters  
(title, location, number of attendees, etc.). 
 
 Important notes 
  • All presenters listed in the tutorial proposal must be available for tutorial presentation.  
  • Consent should be obtained from all the presenters and all organizations involved in presenting the material and also for travel before making the tutorial proposal.  
  • All material from individual presenters must be combined into a single tutorial presentation, as per the presentation guidelines (to be communicated at the time of acceptance).  
  • Accepted tutorial abstracts will be published in conference proceedings. 
To "activate" displaying of an arrow, use its property "Visible"
Accepted Tutorials
Following is the list of accepted tutorials for VDAT 2017. All tutorials will be half-day (3-4 hours) and will be conducted in parallel during the conference, 29th June - 2nd July 2017. Please make sure to indicate the tutorial you will attend during registration.

Tutorial #1:  “Achieving the Best STA Accuracy for Advanced Nodes”
By: Gauri Sankar Malla, Synopsys India Pvt. Ltd., India

Tutorial #2:  "Advanced Analog Design"
By: HS Jatana, SCL Chandigarh, India

Tutorial #3: "Design of Modern mm-Wave Transmitters and Power Amplifiers in Silicon and FD SoI CMOS"
By: Dr. Bhattacharya

Tutorial #4:"Computational Lithography for Advanced CMOS Nodes" 
By: Nihar Ranjan Mohapatra, IIT Gandhinagar

Tutorial #5:  "Transaction Level Modelling with System C For System Level Design"
By: Nishit Gupta, Microelectronics Development Division, Ministry of Communication and Information Technoogy, Govt. of India

Tutorial #6: "Circuit and System Design Issues for IoT Sensor Node"
By: M. Hasan, AMU, Aligarh, India.
Contact Information:
Indian Institute of Technology Roorkee,
Roorkee, District Haridwar,
Uttarakhand - 247667

Email: vdat2017@iitr.ac.in
            sudebfec@iitr.ac.in
            anandfec@iitr.ac.in