Satish C. Sharma

Research Interests

Tribology , Hydrodynamic/ Hydrostatic Lubrication, Hydrostatic/Hybrid thrust/journal Bearings, Non-Newtonian Rheology, Power law/cubic law model, couple stress fluid model, micropolar fluid model, ER/MR fluid model, Surface Topography, Surface Texturing , Vibration, Nonlinear Vibration Signature Analysis, Pinhole Defect, Mass Sensitivity , Diagnosis Analysis, Fault Diagnosis of Ball Bearings, Fault Diagnosis of Roller Bearings

BioSketch

Educational Details

University of Roorkee

1980

B.E. (Mechanical Engineering), Mechanical Engineering

University of Roorkee

1982

M.E. (Hons.) (M/C Design), Mechanical Engineering

University of Roorkee

1990

Ph.D. , Mechanical Engineering (Tribology)

University of Surrey, Guildford, (U.K.)

1994

Leverhulme Visiting Fellow, Mechanical Engineering

Professional Background

Professor (HAG Scale)

01 Jan 2013 - Present

IIT Roorkee

Teaching Assistant

01 Jan 1982 - 01 Jan 1984

University of Roorkee

Research

Projects

TOPIC	START DATE	FIELD	DESCRIPTION	FINANCIAL OUTLAY	FUNDING AGENCY	OTHER OFFICERS
DESIGN AND DEVELOPMENT OF A PROOF OF CONCEPT MODEL OF AN ADAPTIVE MEMBRANE	05 Mar 2015	DESIGN AND DEVELOPMENT OF A PROOF OF CONCEPT MODEL OF AN ADAPTIVE MEMBRANE		Rs. 29.75 Lacs	ISRO	Dr. Suraj P. Harsha, Dr. S. Upadhyay
PREDICTION AND OPTIMIZATION OF DISTORTION AND RESIDUAL STRESSES IN AUSTENTIC STAINLESS STEEL PIPE WELDS	15 Jun 2011	PREDICTION AND OPTIMIZATION OF DISTORTION AND RESIDUAL STRESSES IN AUSTENTIC STAINLESS STEEL PIPE WELDS		24.3195 Lacs	Dept. of Atomic Energy, BRNS, GOI	Manas M. Mahpatrra , Pradeep Kumar
FAULT DIAGNOSIS AND PROGNOSIS OF HIGH SPEED ROLLING ELEMENT BEARING	10 Apr 2009	FAULT DIAGNOSIS AND PROGNOSIS OF HIGH SPEED ROLLING ELEMENT BEARING		31.848 Lacs	DST, Govt. of INDIA	Suraj P. Harsha ; Pradeep Kumar
A PARAMETRIC STUDY OF PERFORMANCE OF A CORIOLIS MASS FLOW RATE METER	11 May 2006	A PARAMETRIC STUDY OF PERFORMANCE OF A CORIOLIS MASS FLOW RATE METER		19.87 Lacs.	DST	Ravi Kumar
EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC JOURNAL BEARING SYSTEM FOR IMPROVED STABILITY	01 Jul 1995	EXPERIMENTAL INVESTIGATION OF HYDRODYNAMIC JOURNAL BEARING SYSTEM FOR IMPROVED STABILITY		Rs. 5.00 Lacs	AICTE (Under MODROBS scheme)	Dr. S C Jain
ANALYSIS OF UPGRADED DRAFT GEAR FREIGHT STOCK (ON GOING	21 Nov 2019	ANALYSIS OF UPGRADED DRAFT GEAR FREIGHT STOCK (ON GOING		5,90,000	Aryan Exporters Private Limited Lucknow	Suraj P. Harsha
DESIGN OPTIMIZATION OF EMERGENCY SPRING FOR PASSENGER COACH SECONDARY SUSPENSION	18 Oct 2018	DESIGN OPTIMIZATION OF EMERGENCY SPRING FOR PASSENGER COACH SECONDARY SUSPENSION		11,80,000	Aryan Exporters Private Limited Lucknow	Suraj P. Harsha
EVALUATION OF PERFORMANCE OF PARTIAL ARC (120⸰) HYDROSTATIC/HYBRID JOURNAL BEARING FOR WET BALL MILL APPLICATION	24 Aug 2017	EVALUATION OF PERFORMANCE OF PARTIAL ARC (120⸰) HYDROSTATIC/HYBRID JOURNAL BEARING FOR WET BALL MILL APPLICATION		18,88,000	BHEL, HYDERABAD	Suraj P. Harsha
EVALUATION OF ENTRIES RECEIVED DURING PUBLIC CHALLENGES FLOATED BY RDSO	10 Jun 2017	EVALUATION OF ENTRIES RECEIVED DURING PUBLIC CHALLENGES FLOATED BY RDSO		25,53,096	RDSO Lucknow	Suraj P. Harsha
VIBRATION DATA ANALYSIS OF HIGH SPEED ROTARY MACHINE ANS AUXILLIARIES AT TEHRI HPP AND KOTESHWOR HEP	05 Mar 2016	VIBRATION DATA ANALYSIS OF HIGH SPEED ROTARY MACHINE ANS AUXILLIARIES AT TEHRI HPP AND KOTESHWOR HEP		14,88,500	TEHRI HPP AND KOTESHWOR HEP	Suraj P. Harsha
ROPEWAY INSPECTION AT JHULAGHAR, MUSSOORIE	20 Dec 2016	ROPEWAY INSPECTION AT JHULAGHAR, MUSSOORIE		1,74,239	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha
MECHANICAL FAULT DIAGNOSIS OF GEAR UNDER VARIOUS CONDITIONS	26 Nov 2015	MECHANICAL FAULT DIAGNOSIS OF GEAR UNDER VARIOUS CONDITIONS		1,48,200	ISGEC, YAMUNAGAR	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT GUN HILL, MUSSORIE	28 Nov 2015	INSPECTION OF ROPEWAY SYSTEM AT GUN HILL, MUSSORIE		1,35,000	M/S SHAIL SHIKHER ASSOCIATES , ROPEWAY JHULAGHAR MUSSOORIE	Suraj P. Harsha
DESIGN AND CALCULATION OF AERIAL ROPEWAYS FOR TRANSPORT OF MATERIALS	10 Dec 2015	DESIGN AND CALCULATION OF AERIAL ROPEWAYS FOR TRANSPORT OF MATERIALS		1,99,500	Uttarakhand Agricultural Produce Marketing Board Dehradun Niranjanpur	Suraj P. Harsha
A STUDY ON HYDRODYNAMIC JOURNAL BEARINGS OF STEAM TURBINE TO COMPUTE THE LUBE OIL AND JACKING OIL FLOW	25 Sep 2014	A STUDY ON HYDRODYNAMIC JOURNAL BEARINGS OF STEAM TURBINE TO COMPUTE THE LUBE OIL AND JACKING OIL FLOW		20,22,000	BHEL, HARIDWAR	Suraj P. Harsha
DEVLOP WELDING PARAMETERS FOR OUTER RING OF GBC 250/500/600/800 MW TO CONTROL DISTORTION	20 Oct 2014	DEVLOP WELDING PARAMETERS FOR OUTER RING OF GBC 250/500/600/800 MW TO CONTROL DISTORTION		8,80,000	BHEL, HARIDWAR	Suraj P. Harsha ; M.M Mahpatra
EROSION ANALYSIS OF GUIDE VANE-KW HYDRO ELECTIC	28 Nov 2014	EROSION ANALYSIS OF GUIDE VANE-KW HYDRO ELECTIC		8,98,880	JAI PRAKASH POWER VENTURES LTD, NOIDA	Suraj P. Harsha
DEVELOPMENT OF UPGRADED DRAFT GEAR FOR FREIGHT STOCK: DEVELOPMENT OF TESTING REGIMES	15 May 2013	DEVELOPMENT OF UPGRADED DRAFT GEAR FOR FREIGHT STOCK: DEVELOPMENT OF TESTING REGIMES		21,25,000	RDSO LUCKNOW	Suraj P. Harsha
DEVELOPMENT OF A SOFTWARE FOR THE DESIGN OF MULTI PLATE WET CLUTCH.	22 Mar 2013	DEVELOPMENT OF A SOFTWARE FOR THE DESIGN OF MULTI PLATE WET CLUTCH.		3,00,000	M/S MAKINO AUTO INDUSTRIES PVT. LTD., NOIDA	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT GUN HILL, MUSSORIE	05 Dec 2013	INSPECTION OF ROPEWAY SYSTEM AT GUN HILL, MUSSORIE		1,09,676	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha
DESIGN VETTING OF COLUMN BEARING HOUSING	29 Nov 2013	DESIGN VETTING OF COLUMN BEARING HOUSING		3,00,000	ISGEC, YAMUNAGAR	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT KAMPTY FALL, MUSSORIE	15 Dec 2013	INSPECTION OF ROPEWAY SYSTEM AT KAMPTY FALL, MUSSORIE		1,09,676	M/S NEENA CONTRACTORS & BUILDERS PVT. LTD.,DEHRADUN	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM ST GUN HILL POINT, MUSSORIE	22 Nov 2013	INSPECTION OF ROPEWAY SYSTEM ST GUN HILL POINT, MUSSORIE		1,09,676	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha
PERFORMANCE ENHANCEMENT OF MULTIPURPOSE HIGH LOW PRESSURE- FIRE PUMP	14 Jun 2013	PERFORMANCE ENHANCEMENT OF MULTIPURPOSE HIGH LOW PRESSURE- FIRE PUMP		8,25,000	SHRI GANESH FIRE EQUIPMENTS(P) LTD., NEW DELHI	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT KEMPTY MUSSORIE	28 Dec 2012	INSPECTION OF ROPEWAY SYSTEM AT KEMPTY MUSSORIE		1,01,325	M/S NEENA CONTRACTORS & BUILDERS PVT. LTD.,DEHRADUN	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT, MUSSOORIE	21 Dec 2012	INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT, MUSSOORIE		1,01,015	M/S SHAIL SHIKHAR ASSOCIATES ROPEWAY, MUSSOORIE	Suraj P. Harsha
INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT, MUSSOORIE	20 Dec 2012	INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT, MUSSOORIE		1,11,250	M/S SHAIL SHIKHER ASSOCIATES , ROPEWAY JHULAGHAR MUSSOORIE	Suraj P. Harsha
COMPUTATION AND VALIDATION OF LUBE OIL AND JACKING OIL FLOWS/LOSSES AS WELL AS STIFFNESS AND DAMPING	15 Aug 2012	COMPUTATION AND VALIDATION OF LUBE OIL AND JACKING OIL FLOWS/LOSSES AS WELL AS STIFFNESS AND DAMPING		12,50,000	BHEL HARDWAR	Suraj P. Harsha
DESIGN OF DEWATERING AND DRAINAGE SYSTEM FOR FLOOD CONTROL AT TEHRI DAMS	28 Apr 2011	DESIGN OF DEWATERING AND DRAINAGE SYSTEM FOR FLOOD CONTROL AT TEHRI DAMS		7,24,801	THDC LTD.	Suraj P. Harsha
FEASIBILITY STUDY FOR USE OF PTEF (TEFLON) MULTIBALL BEARINGS SUPPORT FOR CONDENSOR.	17 Sep 2011	FEASIBILITY STUDY FOR USE OF PTEF (TEFLON) MULTIBALL BEARINGS SUPPORT FOR CONDENSOR.		8,50,000	BHEL, HARIDWAR	Suraj P. Harsha
INSPECTION OF OVER ALL OPERATION OF ROPE WAY	28 Dec 2011	INSPECTION OF OVER ALL OPERATION OF ROPE WAY		71000	M/S SHAIL SHIKHAR ASSOCIATES ROPEWAY MUSSOORIE, DISTT. DEHRADUN UTTARAKHAND	Suraj P. Harsha ; Pradeep Kumar
ROOT CAUSES ANALYSIS OF SHAFT FAILURE OF ROPEWAY	26 Dec 2011	ROOT CAUSES ANALYSIS OF SHAFT FAILURE OF ROPEWAY		1,01,360	EX. OFFICER OFFICE OF NAGAR PALIKA PARISHAD MUSSOORIE	Suraj P. Harsha ; Pradeep Kumar
THIRD PARTY INSPECTION OF 100 CUSEC WATER TREATMENT PLANT TO SUPPLY WATER TO GREATER NOIDA	12 May 2010	THIRD PARTY INSPECTION OF 100 CUSEC WATER TREATMENT PLANT TO SUPPLY WATER TO GREATER NOIDA		62,30,000	PROJECT MANGER, GANGA JAL PROJECT UNIT, UP JAL NIGAM, PRATAP VIHAR GHAZIABAD	V.K. Goel and others
PLANNING AND DESIGN OF GRAVITY ROPEWAY IN NAGALAND.	04 Jun 2010	PLANNING AND DESIGN OF GRAVITY ROPEWAY IN NAGALAND.		15,00,000	NATIONAL HORTICULTURE BOARD,MINISTRY OF AGRICULTURE (GOI)	R.P. Gakkar ; Suraj P. Harsha ; Pradeep Kumar
STUDY AND ROOT CAUSE ANALYSIS OF HIGH VIBRATION ANALYSIS IN CIRCULATING WATER PUMPS 2X250 MW THERMAL POWER PLANT	20 Dec 2010	STUDY AND ROOT CAUSE ANALYSIS OF HIGH VIBRATION ANALYSIS IN CIRCULATING WATER PUMPS 2X250 MW THERMAL POWER PLANT		7,00,000	M/S PUNJ LLOYOD LTD. GURGAON,	Suraj P. Harsha
ANALYSIS OF 250 MW FRANCIS TURBINE COMPONENTS FOR KARCHAM WANGTOO HEP. (1000 MW),	10 Dec 2010	ANALYSIS OF 250 MW FRANCIS TURBINE COMPONENTS FOR KARCHAM WANGTOO HEP. (1000 MW),		4,80,000	M/S JAI PRAKASH ASSOCIATES LTD. NOIDA	Suraj P. Harsha
DESIGN OF 650 KN LIFTING SYSTEM	16 Dec 2010	DESIGN OF 650 KN LIFTING SYSTEM		30734	PIONEER FABRICATION (P) LTD., MEERUT	Suraj P. Harsha ,Pradeep Kumar
INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT MUSSORIE	10 Dec 2010	INSPECTION OF ROPEWAY SYSTEM AT GUN HILL POINT MUSSORIE		1,01,360	M/S SHAIL SHIKHAR ASSOCIATES, MUSSORIE	Suraj P. Harsha , Pradeep Kumar
INSPECTION OF ROPEWAY SYSTEM AT KEMPTY FALL, MUSSORIE	02 Dec 2010	INSPECTION OF ROPEWAY SYSTEM AT KEMPTY FALL, MUSSORIE		1,01,360	M/S NEENA CONTRACTORS & BUILDERS PVT. LTD. DEHRADUN	Pradeep Kumar, Suraj P. Harsha
VIBRATION ANALYSIS OF TWO COMPONENTS OF EICHER TRACTORS	28 Oct 2010	VIBRATION ANALYSIS OF TWO COMPONENTS OF EICHER TRACTORS		4,00,000	EICHER TRACTORS LTD. BHOPAL	Suraj P. Harsha
INSPECTION OF ROPEWAY AT MUSSORIE	30 Dec 2010	INSPECTION OF ROPEWAY AT MUSSORIE		78975	M/S SHAIL SHIKHAR ASSOCIATES, MUSSORIE	Pradeep Kumar
VETTING OF DESIGN FOR MAA CHANDI DEVI ROPEWAY HANGER	24 Dec 2010	VETTING OF DESIGN FOR MAA CHANDI DEVI ROPEWAY HANGER		1,80,000	M/S USHA BRECO LTD., REGIONAL OFFICE HARIDWAR	Suraj P. Harsha , Pradeep Kumar
SITE VISIT AND DISCUSSION AT ONGC	12 Nov 2010	SITE VISIT AND DISCUSSION AT ONGC		15000	ONGC LTD. VADODRA	M. Mahapatra , Suraj P. Harsha
INSPECTION OF KEMPTY FALL ROPEWAY AT MUSSORIE	30 Dec 2010	INSPECTION OF KEMPTY FALL ROPEWAY AT MUSSORIE		91000	M/S NEENA CONTRACTORS AND BUILDERS PVT. LTD., DEHRADUN	Pradeep Kumar , Suraj P. Harsha
INSPECTION OF ROPEWAY AT MANSA DAVI, HARDWAR	31 Dec 2010	INSPECTION OF ROPEWAY AT MANSA DAVI, HARDWAR		60000	DISTRICT MAGISTRATE HARIDWAR	V. K. Goel , R.P. Gakkhar
SITE OF ROPEWAY SYSTEM AT KEMPTY FALL, MUSSOORIE	29 Nov 2009	SITE OF ROPEWAY SYSTEM AT KEMPTY FALL, MUSSOORIE		90000	M/S NEENA CONTRACTORS & BUILDERS PVT. LTD.,DEHRADUN	Suraj P. Harsha ; Pradeep Kumar
SITE VISIT OF ROPEWAY SYSTEM AT JHULAGHAR	11 Dec 2009	SITE VISIT OF ROPEWAY SYSTEM AT JHULAGHAR		50934	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha ; Pradeep Kumar
TECHNICAL ENQUIRY OF MANSADEVI ROPEWAYS	30 Dec 2009	TECHNICAL ENQUIRY OF MANSADEVI ROPEWAYS		2,00,000	DISTRICT MAGISTRATE HARIDWAR	V. K. Goel ; R.P. Gakkhar
STUDY AND DESIGN IMPROVEMENT IN CTRB OF FREIGHT STOCK OF INDIAN RAILWAYS	10 Mar 2009	STUDY AND DESIGN IMPROVEMENT IN CTRB OF FREIGHT STOCK OF INDIAN RAILWAYS		21,38,713	RDSO, LUCKNOW	Suraj P. Harsha
INSPECTION OF ROPEWAY AT MUSSOORIE	23 Dec 2009	INSPECTION OF ROPEWAY AT MUSSOORIE		50000	M/S SHAIL SHIKHER ASSOCIATES ( REGD. ) MUSSOORIE	Pradeep Kumar
EVALUATION OF ROPE PERFORMANCE	21 Dec 2009	EVALUATION OF ROPE PERFORMANCE		90000	GARHWAL MANDAL VIKAS NIGAM LTD., DEHRADUN	Suraj P. Harsha ; Pradeep Kumar
ROPEWAY INSPECTION AT MUSSOORIE	18 Dec 2009	ROPEWAY INSPECTION AT MUSSOORIE		50934	SHAIL SHIKHER ASSOCIATES MUSSOORIE	Pradeep Kumar
DESIGN VETTING OF FIXTURE OF 28 AXLE RAIL WAGON	08 Oct 2009	DESIGN VETTING OF FIXTURE OF 28 AXLE RAIL WAGON		8,70,000	BHEL HARIDWAR	Suraj P. Harsha ; Pradeep Kumar
FIELD AND LABORATORY STUDIES FOR QUALITY ASSURANCE FOR DEVELOPMENT OF BIHAR STATE UNDER	07 May 2008	FIELD AND LABORATORY STUDIES FOR QUALITY ASSURANCE FOR DEVELOPMENT OF BIHAR STATE UNDER		2,29,61,908	CPWD PATNA BIHAR	S C Jain and others
SITE VISIT DISCUSSION AT SITE AND ADVICE FOR QUALITY ASSURANCE FOR DEVELOPMENT OF BIHAR STATE UNDER RSVY BY CPWD	16 Apr 2008	SITE VISIT DISCUSSION AT SITE AND ADVICE FOR QUALITY ASSURANCE FOR DEVELOPMENT OF BIHAR STATE UNDER RSVY BY CPWD		2,29,61,908	CPWD PATNA BIHAR	S C Jain and others
MAINTENANCE EVALUATION OF ROPEWAY	26 Dec 2008	MAINTENANCE EVALUATION OF ROPEWAY		50000	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha ; Pradeep Kumar
INSPECTION OF ROPEWAY	10 Dec 2008	INSPECTION OF ROPEWAY		50000	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha
ROPEWAY INSPECTION AT DEHRADUN	24 Dec 2007	ROPEWAY INSPECTION AT DEHRADUN		25000	SHRI GANPATI SAGAR HILL RISE, DEHRADUN	Suraj P. Harsha ; Pradeep Kumar
ANNUAL TESTING OF ROPEWAY	24 Dec 2006	ANNUAL TESTING OF ROPEWAY		22274	M/S SHAIL SHIKHAR ASSOCIATES (REGD.), MUSSORIE	Suraj P. Harsha ; Pradeep Kumar
AIRCRAFT NOISE MONITORING AROUND INDIRA GANDHI INTERNATIONAL AIRPORT	12 Mar 1999	AIRCRAFT NOISE MONITORING AROUND INDIRA GANDHI INTERNATIONAL AIRPORT		4,00,000	CENTRAL POLLUTION CONTROL BOARD, NEW DELHI	S P Nigam ; S C Jain ; M Bhattacharya

Publications

2022

1. Krishnkant Sahu, Satish C. Sharma, and Nathi Ram, " The Effect of Misaligned Journal Conditions in Slot-entry MR Fluid Lubricated Journal Bearing in the Presence of Bearing Surface Irregularities." International Journal of Mechanical Sciences (2022): (Accepted).

2. Satish C. Sharma, and Nitin Agrawal “Performance of a Spherical Hybrid Thrust Bearing Considering the Influence of Surface Irregularities and MR Lubricant Behaviour”, ‘STLE Tribology Transactions’, 2022, (In Press).

3. Anil Singh, and Satish C. Sharma, “"Influence of geometric imperfection of journal on the performance of porous hybrid journal bearing under turbulent condition”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2022, (In Press).

4. Kumar, Abhishek, and Satish C. Sharma, “Ferrofluid Lubrication of Optimized Spiral-Grooved Conical Hybrid Journal Bearing using Current Carrying Wire Model. "ASME Journal of Tribology” 144.4 (2022): 041801.

5. Tomar, Adesh Kumar, and Satish C. Sharma, " Study on Surface Roughness and Piezo-viscous Shear thinning Lubricant Effects on the Performance of Hole-entry Hybrid Spherical Journal Bearing “Tribology International”, Volume 168, April 2022, 107349.

2021

6. Bhamu, Rajesh K., Aakash Shukla, Satish C. Sharma, and S. P. Harsha. " Low Cycle Fatigue Life Prediction of LP Steam Turbine Blade for Various Blade-Rotor Fixity Conditions" Journal of Failure Analysis and Prevention (2021).

7. Vikas Tiwari, Satish C. Sharma, and S. P. Harsha. "A Comparative Study on the Behaviour of Ride Quality due to Deflated State of Air Spring using different Properties of Hyperelastic Material." International Journal of Structural Stability and Dynamics, (2021).

8. Narendra Kumar, and Satish C. Sharma, “"Influence of MR lubricant behavior on the Performance of Annular Recessed Orifice Compensated Non-Textured/Textured Thrust pad bearing”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2021, (DOI: 10.1177/13506501211031376).

9. Nitin Agrawal, and Satish C. Sharma, “"Performance of textured spherical thrust hybrid bearing operating with shear thinning and piezoviscous lubricants”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2021, (DOI: 10.1177/13506501211048308).

10. Sharma, Satish C., and Adesh Kumar Tomar. "Study on MR Fluid Hybrid Hole-Entry Spherical Journal Bearing with Micro-Grooves." International Journal of Mechanical Sciences (2021): Volume 202-203; 106504.

11. Kumar, Abhishek, and Satish C. Sharma, “Magneto-Hydrodynamics of Lubricant in Recessed Conical Hybrid Journal Bearing with Taper Error. "ASME Journal of Tribology” 143.8 (2021): 081801.

12. Satish C. Sharma, and Krishnkant Sahu, “On the Behavior of Ferrofluid Lubricated Herringbone Grooved Hybrid Slot-entry Bearing”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2021. (doi.org/10.1177/1350650121997241)

13. Satish C. Sharma, and Kumar, Abhishek, “On the behaviour of roughened conical hybrid journal bearing system operating with MR lubricant. " Tribology International” Volume 156, April 2021, 106824.

14. Satish C. Sharma, and Anil Singh “Behaviour of Conical Porous Hybrid Journal Bearing with Pseudoplastic Lubricant”, ‘STLE Tribology Transactions’, 2021, 64:3, 413-433, DOI: 10.1080/10402004.2020.1850958.

15. Nitin Agrawal and Satish C. Sharma, “Effect of the ER lubricant behaviour on the performance of spherical recessed hydrostatic thrust bearing”, in “Tribology International”, Volume 153, January 2021, 106621.

16. Anil Singh, and Satish C. Sharma, " Analysis of a double layer porous hybrid journal bearing considering the combined influence of wear and non- Newtonian behaviour of lubricant." ‘Meccanica’, 56(1), 73–98 (2021), (DOI: https://doi.org/10.1007/s11012-020-01259-2).

17. Bhamu, Rajesh K., Aakash Shukla, Satish C. Sharma, and S. P. Harsha. "Dynamic Analysis of Low-Pressure Steam Turbine Last Stage Fir-Tree Root Blade." Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 4, no. 2 (2021).

18. Anil Singh, and Satish C. Sharma, “"Influence of geometric imperfection of journal on the performance of porous hybrid journal bearing under turbulent condition”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2021, (doi.org/10.1177/1350650120976427).

2020

19. Vivek Kumar, Satish C. Sharma, “Performance analysis of rough surface hybrid thrust bearing with elliptical dimples”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2020, (doi.org/10.1177/1350650120931981).

20. Tomar, Adesh Kumar, and Satish C. Sharma, "A Study of Hole-Entry Grooved Surface Hybrid Spherical Journal Bearing Operating with Electrorheological Lubricant" ASME Journal of Tribology”,142.11 (2020).

21. Tomar, Adesh Kumar, and Satish C. Sharma, "An investigation into surface texture effect on hole-entry hybrid spherical journal bearing performance “Tribology International”, 151.11 (2020): 106417.

22. Kumar, Vivek; Shah, Vatsalkumar; Singh, Simran; Narwat, Kuldeep and Satish C. Sharma, “Rotor-dynamic Performance of Porous Hydrostatic Thrust Bearing Operating Under Magnetic field”, ‘Industrial Lubrication and Tribology’ 2020, (10.1108/ILT-07-2020-0289).

23. Kumar, Navin, Akash Shukla, Sanjay Bansal, Chandra B. Khatri, Gannath D. Thakre, Saurabh K. Yadav, Satish C. Sharma, and Suraj P. Harsha., “Thermo-hydrodynamic Simulation Study of Twin-groove Elliptical (two-lobe) Journal Bearing of Steam Turbine with experimental investigations”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2020, (doi.org/10.1177/1350650120973798.

2019

24. Krishnkant Sahu, Satish C. Sharma, “Influence of Bearing Surface Irregularities on Hybrid Slot-Entry Journal Bearing with Electrically Conducting Lubricant”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2019. (doi.org/10.1177/1350650119896195)

25. Vivek Kumar, Satish C. Sharma, “Effect of geometric shape of micro grooves on the performance of textured hybrid thrust pad bearing”, ‘Journal of the Brazilian Society of Mechanical Sciences and Engineering’ (2019) 41: 508. https://doi.org/10.1007/s40430-019-2016-0

26. Adesh Kumar Tomar, Satish C. Sharma, “Finite element analysis of multi-recess hybrid spherical journal bearing system”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2019. (DOI: 10.1177/1350650119884829)

27. Vivek Kumar, Satish C. Sharma, “Influence of microgroove attributes on frictional power loss and load carrying capacity of hybrid thrust bearing”, ‘Industrial Lubrication and Tribology’ 2019. (I 10.1108/ILT-07-2019-0278)

28. Krishnkant Sahu and Satish C. Sharma, “Magneto-rheological Fluid Slot-Entry Journal Bearing Considering Thermal Effects”, Journal of Intelligent Material Systems and Structures, Volume: 30 issue: 18-19, page(s): 2831-2852, 2019. (DOI-10.1177/1045389X19873401)

29. Krishnkant Sahu and Satish C. Sharma, “A Simulation Study on the Behavior of Magnetorheological Fluid on Herringbone Grooved Hybrid Slot-entry Bearing”, ‘STLE Tribology Transactions’, 2019. Pages 1099-1118, 62:6, (DOI-10.1080/10402004.2019.1649775)

30. Vivek Kumar, Satish C. Sharma, “Magneto-hydrostatic lubrication of thrust bearings considering different configurations of recess”, ‘Industrial Lubrication and Tribology’ 2019. (DOI-10.1108/ILT-10-2018-0370)

31. Kumar, Abhishek, and Satish C. Sharma, “Optimal Parameters of Grooved Conical Hybrid Journal Bearing with Shear Thinning and Piezo-viscous Lubricant Behavior. "ASME Journal of Tribology” 141.7 (2019): pp.07-17(02) (DOI- 10.1115/1.4043507)

2018

32. Suresh Jadhav, G. D. Thakre and Satish C. Sharma, "Numerical modeling of elastohydrodynamic lubrication of line contact lubricated with micropolar fluid." ‘Journal of the Brazilian Society of Mechanical Sciences and Engineering’ 40.6:326, 2018.

33. Satish C. Sharma and Chandra B. Khatri, “Electro-rheological fluid lubricated textured multi-lobe hole-entry hybrid journal bearing system”, ‘Journal of Intelligent Material Systems and Structures’, 29.8: 1600-1619, 2018.

34. Vivek Kumar, Satish C. Sharma, “Dynamic characteristics of compensated hydrostatic thrust pad bearing subjected to external transverse magnetic field”, ‘Acta Mechanica’, 229.3: 1251-1274, 2018.

35. Saurabh K. Yadav, Arvind K. Rajput, Nathi Ram and Satish C. Sharma, “A direct numerical approach to compute the nonlinear rotordynamic coefficient of the non-circular gas journal Bearing”, ‘IMechE Part-J, Journal of Engineering Tribology’, 232.4: 453-468, 2018.

36. Saurabh K. Yadav, Arvind K. Rajput, Nathi Ram and Satish C. Sharma, "A novel technique to compute static and dynamic performance characteristics of aerostatic thrust bearing" ‘Industrial Lubrication and Tribology’ 70.1: 84-96, 2018.

37. Vivek Kumar, Satish C. Sharma, Finite element method analysis of hydrostatic thrust pad bearings operating with electrically conducting lubricant”, ‘IMechE Part-J, Journal of Engineering Tribology’, 2018. DOI: 1350650117753530.

38. Chandra B. Khatri and Satish C. Sharma, "Analysis of textured multi-lobe non-recessed hybrid journal bearings with various restrictors", ‘International Journal of Mechanical Sciences’, 145: 258-286, 2018.

39. Krishnkant Sahu, Satish C. Sharma, “A study on performance of slot-entry hybrid journal bearing considering of effect of surface irregularities”, ‘Industrial Lubrication and Tribology’, 2018. (DOI: 10.1108/ILT-09-2017-0264)

40. Jadhav, Suresh, Gananath D. Thakre, and Satish C. Sharma, "An experimental study on tribological performance and surface characteristics of lubricated point contact." ‘Acta Mechanica’ (2018): 1-18.

41. Vivek Kumar, and Satish C. Sharma, "Influence of dimple geometry and micro-roughness orientation on performance of textured hybrid thrust pad bearing." ‘Meccanica’ 53.14 (2018): 3579-3606.

42. Abhishek Kumar, and Satish C. Sharma, "Textured conical hybrid journal bearing with ER lubricant behavior." ‘Tribology International’, 129 (2019): 363-376. (DOI.10.1016/j.triboint.2018.08.040)

2017

43. Arvind K. Rajput, Saurabh K. Yadav and Satish C. Sharma, “Effect of geometrical irregularities on the performance of a misaligned hybrid journal bearing compensated with membrane restrictor" ‘Tribology International’ 115: 619-627, 2017.

44. Chandra B. khatri and Satish C. Sharma, “Performance of two-lobe non-recessed hybrid journal bearing system under consideration combined influence of textured surface and couple stress lubricant”, Mechanics and Industry, 8.6: 603-623, 2017.

45. Satish C. Sharma and Prashant B.Kushare, “Nonlinear Transient Response of Rough Symmetric Two Lobe Hole Entry Hybrid Journal Bearing System” ‘Journal of Vibration and Control’, 23 (2): pp. 190-219 ,2017.

46. Chandra B. Khatri and Satish C. Sharma, “Influence of couple stress lubricant on the performance of textured two-lobe slot-entry hybrid journal bearing system”, ‘IMechE Part-J, Journal of Engineering Tribology’, 231(3). pp. 366-384, 2017.

47. Vivek Kumar, Satish C. Sharma, “Combined Influence of Couple Stress Lubricant, Recess Geometry and method of compensation on the performance of Hydrostatic Circular Thrust Pad Bearing”, ‘IMechE Part-J, Journal of Engineering Tribology’, 231 (6): pp. 716-733, 2017.

48. Dharmendra jain and Satish C.Sharma, "Dynamic analysis of a 2-lobe geometrically imperfect journal bearing system." ‘IMechE Part-J, Journal of Engineering Tribology’, 231.7: 934-950, 2017.

49. Dharmendra jain and Satish C. Sharma, “Combined influence of couple Stress lubricant and geometric inperfection of journal on the performance of Membrane Compensated Two-lobe Hybrid Journal Bearing”, ‘International Journal of Surface Science and Engineering’, 11.3: pp. 191-224, 2017.

50. Chandra B. khatri and Satish C. Sharma, “Behaviour of two-lobe hole-entry hybrid journal bearing system under the combined influence of textured surface and micropolar lubricant”, ‘Industrial Lubrication and Tribology’, 69.6: 844-862, 2017.

51. Vivek Kumar, Satish C. Sharma, “Performance of Annular Recessed Hydrostatic Tilted Thrustpad Bearing Operating with Couple Stress Lubricant”, ‘International Journal of Surface Science and Engineering’, 11.4: 344-369, 2017.

2016

52. Thakre, G. D., Satish C. Sharma, Harsha, S. P., & Tyagi, M. R. “A theoretical study of ionic liquid lubricated μ-EHL line contacts considering surface texture”, ‘Tribology International’, 94, 39-51, 2016.

53. Satish C. Sharma, and Saurabh K. Yadav. "A comparative study of full and partial textured hybrid orifice compensated circular thrust pad bearing system." ‘Tribology International’ 95: 170-180, 2016.

54. Khatri, Chandra B., and Satish C. Sharma. "Influence of textured surface on the performance of non-recessed hybrid journal bearing operating with non-Newtonian lubricant." ‘Tribology International’ 95: 221-235, 2016.

55. Arvind K Rajput and Satish C Sharma, “Combined influence of geometric imperfections and misalignment of journal on the performance of four pocket hybrid journal bearing.” ‘Tribology International’, 97:59-70, 2016.

56. Saurabh Kumar Yadav and Satish C. Sharma, “Performance of hydrostatic textured thrust bearing with supply holes operating with non-Newtonian lubricant." ‘STLE Tribology Transactions’ 59.3: 408-420, 2016.

57. Harak, S.S., Satish C. Sharma, Harsha, S.P., Dynamic Analysis of Draft Gear and Draft Pad of Freight Wagon Due to Localized Defects using FEM, ‘International Journal of Acoustics and Vibration’, 21.3: 281-291, 2016.

58. Yadav, Saurabh K., and Satish C. Sharma. "Finite element analysis of tilted thrust pad bearings of various recesses shapes considering thrust pad flexibility." ‘IMechE Part-J, Journal of Engineering Tribology’, 230.7: 872-893, 2016.

59. Chandra B. Khatri and Satish C. Sharma, “Performance of 180º partial hole-entry hybrid journal bearing considering the combined influence of surface roughness and non-Newtonian behaviour of lubricant”, ‘International Journal of Surface Science and Engineering’, 10.6: 527-558, 2016.

2015

60. Satish C. Sharma, and Prashant B. Kushare, “Two lobe non-recessed roughened hybrid journal bearing-A comparative study”, ‘Tribology International’, 83: pp.51-58, 2015.

61. Dharmendra jain and Satish C. Sharma, “Two-lobe geometrically imperfect hybrid journal bearing operating with power law lubricant”, ‘IMechE Part-J, Journal of Engineering Tribology’, 229.1, pp. 30-46, 2015.

62. Thakre, Gananath D., Satish C. Sharma, S. P. Harsha, and M. R. Tyagi. "A parametric investigation on the microelastohydrodynamic lubrication of power law fluid lubricated line contact." ‘IMechE Part-J, Journal of Engineering Tribology’, 229.10: 1187-1205, 2015.

63. Dharmendra jain and Satish C. Sharma, “Combined influence of geometric irregularities of journal and turbulence on the performance of four-lobe hybrid journal bearing." ‘IMechE Part-J, Journal of Engineering Tribology’, 229.12: 1409-1424, 2015.

64. Kanoje, Nagvendra Kumar, Satish C. Sharma, and Suraj P. Harsha. "Subsurface crack propagation with different inclusion under a wheel–flat LEFM analysis using dynamics conditions." ‘International Journal of Vehicle Noise and Vibration’ 11.1, pp: 1-17, 2015.

65. Prashant B. Kushare and Satish C. Sharma, "Influence of wear on the performance of 2-lobe slot entry hybrid journal bearings" ‘Mechanics and Industry’, 16.5: 502, 2015.

66. Kushare, Prashant B., and Satish C. Sharma, "A study of 2-lobe symmetric hole entry hybrid journal bearing operating with non-Newtonian lubricant considering thermal effects." ‘Tribology International’92: 567-576, 2015.

2014

67. Saurabh Kumar Yadav and Satish C. Sharma, “Performance of hydrostatic tilted thrust pad bearings of various recess shapes operating with Non-Newtonian lubricant”, ‘Finite Elements in Analysis and Design’ 87, pp. 43-55, 2014.

68. Arvind K. Rajput, and Satish C. Sharma, “Stability of a Constant Flow Valve Compensated Multirecess Conical Hybrid Journal Bearing Operating with Micropolar Lubrican”, ‘Lubrication Science’ 26.5, pp. 347-362, 2014.

69. Satish C. Sharma, and Saurabh Kumar Yadav, “Performance analysis of a fully textured hybrid circular thrust pad bearing system operating with non-Newtonian lubricant” ‘Tribology International’, 77: pp. 50-64,2014.

70. Gananath D. Thakre, Satish C. Sharma, S.P. Harsha and M.R. Tyagi, “Tribological failure analysis of gear contacts of Exciter Sieve gear boxes” ‘Engineering Failure Analysis’, 36: pp.75-91, 2014.

71. Arvind K Rajput and Satish C. Sharma, “A study of capillary-compensated geometrically imperfect six-pocket hybrid journal bearing of various geometric shapes of recess”, ‘IMechE Part-J, Journal of Engineering Tribology’, 228(2): pp. 170-186, 2014.

72. Prashant B.Kushare and Satish C. Sharma, “Nonlinear Transient Stability Study of Two Lobe Symmetric Hole Entry Worn Hybrid Journal Bearing Operating With Non-Newtonian Lubricant” ‘Tribology International’, 69: pp. 84-101, 2014.

73. Nathi Ram and Satish C. Sharma, "Influence of Wear on the Performance of Hole-Entry Hybrid Misaligned Journal Bearing in Turbulent Regime", ‘Industrial Lubrication and Tribology’, Vol. 66 (4), 2014.

74. Prashant B.Kushare and Satish C. Sharma, “Surface roughness effect on the Performance of 3-lobe symmetric hole entry hybrid journal bearings”, Applied Mechanics and Materials Vol. 592, pp. 1190-1194, 2014.

75. Yadav, Saurabh Kumar, and Satish C. Sharma, "Performance comparison of partial and full textured thrust bearing operating with non-Newtonian lubricant." Applied Mechanics and Materials. Vol. 592, pp. 1376-1380, 2014.

76. Nagvendra kumar kanoje, Satish C. Sharma, and S. P. Harsha. "EPFM Analysis of Subsurface Crack Beneath a Wheel Flat Using Dynamic Condition." Procedia Materials Science 6, pp: 43-60, 2014.

77. Kanoje, Nagvendra Kumar, Satish C. Sharma, and S. P. Harsha. "Wheel-rail and wheel-flat as a coupled system: Contact dynamics modeling with finite element analysis." Journal of Coupled Systems and Multiscale Dynamics 2.1, pp: 20-27, 2014.

78. Harak, S. S., Satish C. Sharma, and S. P. Harsha. "Structural dynamic analysis of freight railway wagon using finite element method." Procedia Materials Science’ 6, pp: 1891-1898, 2014.

2013

79. Prashant B Kushare and Satish C Sharma, “A study of two lobe non recessed worn journal bearing operating with non-Newtonian lubricant”, ‘IMechE Part-J, Journal of Engineering Tribology’, 227(12): pp. 1418-37, 2013.

80. Satish C. Sharma, Saurabh K. Yadav, “Performance of hydrostatic circular thrust pad bearing operating with Rabinowitsch fluid model”, ‘IMechE Part-J, Journal of Engineering Tribology’, 227(11): pp. 1272-84, 2013.

81. Satish C. Sharma, Arvind K. Rajput,” Effect of geometric imperfections of journal on the performance of micropolar lubricated 4-pocket hybrid journal bearing,” ‘Tribology International’, Vol. 60, pp. 156–168, 2013.

82. Nathi Ram, Satish C. Sharma, “A Study of Misaligned Hole-Entry Worn Journal Bearing Operating In Turbulent Regime”, ‘Industrial Lubrication and Tribology’, 65(2), 2013, pp.108-118.

83. P.K. Kankar, Sharma C. Satish and S.P. Harsha, “Fault diagnosis of rolling element bearing using cyclic autocorrelation and wavelet transform”, ‘Neurocomputing’, 110, 2013, pp.9-17.

84. Arvind K. Rajput, Satish C. Sharma, “Analysis of externally pressurized multirecess conical hybrid journal bearing system using micropolar lubricant,” ‘IMechE Part-J, Journal of Engineering Tribology’, Vol. 227(9) 2013, pp. 943-961.

2012

85. J. Stahlmann, E. Rajasekhar Nicodemus and Satish C. Sharma, P. Groche, “Surface roughness evaluation in FEA simulations of bulk metal forming process”, ‘WEAR’, 288, pp. 78-87, 2012.

86. Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, “Performance Analysis of a 2-Lobe Worn Multirecess Hybrid Journal Bearing System Using Different Flow Control Devices,” ‘Tribology International’, vol. 52, pp. 101-116, 2012.

87. Nathi Ram, Satish C. Sharma, “Analysis of Orifice Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing operating with Micropolar Lubricants”, ‘Tribology International’, vol. 52, pp. 132-143, 2012.

88. Satish C. Sharma, Arvind K. Rajput, “Influence of Micropolar Lubrication on the Performance of 4-Pocket Capillary Compensated Conical Hybrid Journal Bearing” ‘Advances in Tribology’, Volume 2012 Article ID 898252, 2012, pp-1-18.

89. Arvind K. Rajput, Satish C. Sharma, Marut Shukla and Souvik Roy “A parametric study of S- tube Coriolis mass flow meter”, Sensors & Transducers, Vol.142, Issue 7, 2012, pp-118-129.

90. Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, "Combined Influence of Wear and Misalignment of Journal on the Performance Analysis of 3-Lobe Three-Pocket Hybrid Journal Bearing Compensated with Capillary Restrictor, "ASME Journal of Tribology”, Vol.134, 011703,2012.

91. E. Rajasekhar Nicodemus and Satish C. Sharma, “Performance Characteristics of Micropolar Lubricated Membrane-Compensated Worn Hybrid Journal Bearings”, ‘STLE Tribology Transactions’ Vol. 55, pp. 59 -70, 2012.

92. K.M. Jagadeesha, T. Nagaraju, Satish C. Sharma, and S. C. Jain, “3D Surface Roughness Effects on Transient Non-Newtonian Response of Dynamically Loaded Journal Bearings”, ‘STLE Tribology Transactions’, Vol. 55, pp. 32 -42, 2012.

93. P.K. Kankar, Sharma C. Satish and S.P. Harsha, “Vibration Based Performance Prediction of Ball Bearings caused by Localized Defects”, Nonlinear Dynamics, 69.3: 847-875, 2012.

94. P.K. Kankar, Sharma C. Satish and S.P. Harsha, “Nonlinear Vibration Signature Analysis of a High Speed Rotor Bearing System due to Race Imperfection”, Journal of Computational and Nonlinear Dynamics, Vol. 7, No. 1, pp. 011014-29, 2012

95. Pravin P. Patil, Satish C. Sharma and S.C. Jain, “Response Surface Modeling of Vibrating Omega Tube (Copper) Electromechanical Coriolis Mass Flow Sensor", Expert Systems with Applications, vol.39, pp.4418-4426, 2012.

96. Pravin P. Patil, Satish C. Sharma and S.C. Jain, “Performance Evaluation of a Copper Omega Type Coriolis Mass Flow Sensor with an Aid of ANFIS Tool", Expert Systems with Applications, vol.39, pp.5019-5024, 2012.

97. Satish C. Sharma, Vikas M. Phalle, S.C.Jain, “Performance of 2-Lobe Multirecess Constant Flow Valve Compensated Hybrid Journal Bearing by Considering Wear”, ‘Industrial Lubrication and Tribology’, 64(3), 2012, pp.171-181.

98. Unnati A Joshi, Satish C Sharma, S. P. Harsha, “Effect of Carbon Nanotube Orientation on the Mechanical Properties of Nano Composites”, ‘Composites Part B: Engineering’, 43(4) 2012 pp. 2063-71.

99. Anand Y Joshi, Satish C Sharma, S.P. Harsha, “Chaotic Response Analysis of Single Walled Carbon Nanotube due to Surface Deviations” ‘NANO - World Scientific’, 7(2) 2012, pp. 1250008-1-10.

100.Unnati A Joshi, Satish C Sharma, S.P. Harsha, Influence of Dispersion and Alignment of Nanotubes on the Strength and Elasticity of Carbon Nanotubes Reinforced Composites, “ASME Journal of Nanotechnology in Engineering and Medicine”, American Institute of Physics2(4) 2012.

101.Anand Y Joshi, Satish C Sharma, S. P. Harsha, Nonlinear Dynamic Analysis of Single walled carbon Nanotube based mass sensors due to surface deviations, “ASME Journal of Nanotechnology in Engineering and Medicine”, American Institute of Physics, 2(4), 2012.

2011

102.Satish C. Sharma, Nathi Ram, “Influence of Micropolar Lubricants on the Performance of Slot-Entry Hybrid Journal Bearing”, ‘Tribology International’, Vol.44, No.12, pp. 1852-1863, 2011.

103.R.K. Gautam, S. Ray, Satish C. Sharma, S. C. Jain and R Tyagi, “Dry Sliding Wear behavior of hot forged and anneled Cu-Cr-graphite in-situ Composites,” ‘WEAR’, Vol.271, pp. 658-664, 2011.

104.Satish C. Sharma, and E. Rajasekhar Nicodemus, and Nathi Ram, A study of misaligned micropolar lubricated membrane compensated hybrid journal bearing, “ASME Journal of Tribology”, Vol.133, pp.031703-031709, 2011.

105.Satish C. Sharma, Vikas M. Phalle, S.C.Jain, “Influence of Wear on The Performance of a Multirecess Conical Hybrid Journal Bearing Compensated With Orifice Restrictor, ‘Tribology International’, Vol. 44(12), pp. 1754-1764, 2011.

106.E. Rajasekhar Nicodemus, Satish C. Sharma, “Orifice Compensated Multirecess Hydrostatic/Hybrid Journal Bearing System of Various Geometric Shapes of Recess Operating with Micropolar Lubricant”, ‘Tribology International’, Vol.44, No.3, pp.284-296,2011.

107.Satish C. Sharma, Vikas M. Phalle, S.C.Jain, “Performance Analysis of a Multirecess Capillary Compensated Conical Hydrostatic Journal Bearing”, ‘Tribology International’, Vol.44, No.5, pp.617-626, 2011.

108.Vikas M. Phalle, Satish C. Sharma, S.C.Jain, “Influence of Wear on the Performance of a 2-lobe Multirecess Hybrid Journal Bearing System Compensated with Membrane Restrictor”, ‘Tribology International’, Vol.44,No.4, pp.380-395,2011.

109.Kankar P.K., Satish C. Sharma, and Harsha S.P., “Fault Diagnosis of Ball Bearings Using Machine Learning Methods”, Expert Systems with Applications, Vol. 38, No. 3, pp. 1876-1886, 2011.

110.Kankar P.K., Satish C. Sharma, and Harsha S.P., Fault Diagnosis of High Speed Rolling Element Bearings Due to Localized Defects using Response Surface Method, “ASME Journal of Dynamic Systems, Measurement and Control”, Vol. 133, No. 2, pp.031007-1 to 031007-14, 2011,

111.Unnati A Joshi, Satish C. Sharma, S.P. Harsha, “Analysis of Elastic Properties of Carbon Nanotube Reinforced Nano Composites with Pinhole Defects”, Computational Materials Science, Vol. 50, Issue 11, 2011, 3245-3256, Elsevier Publishers.

112.Unnati A Joshi, Satish C. Sharma, S. P. Harsha, Effect of Pinhole Defects on the Elasticity of Carbon Nanotube Based Nanocomposites, “ASME Journal of Nanotechnology in Engineering and Medicine”, Vol. 2, Issue 1, 2011, 011003-1-7, American Institute of Physics.

113.Unnati A Joshi, Satish C. Sharma, S. P. Harsha, “Modelling and analysis of mechanical behavior of carbon nanotube reinforced composites”, Proceedings of IMechE, Part N: Journal of Nanoengineering and Nanosystems, Vol. 225, Issue 1, 2011.

114.R.K. Gautam, S. Ray, Satish C. Sharma, S. C. Jain and R Tyagi, “Dry Sliding Wear behavior of hot forged and anneled Cu-Cr-graphite in-situ Composites,” ‘WEAR’, Vol.271, pp. 658-664, 2011.

115.Anand Y Joshi, Satish C. Sharma, S. P. Harsha, “Zeptogram Scale Mass sensing using Single Walled Carbon Nanotube Based Biosensors”, ‘Sensors & Actuators: A Physical’, Vol. 168, Issue 2, pp. 275-280, 2011.

116.Unnati A Joshi, Satish C. Sharma, S.P. Harsha, “Effect of waviness on the Mechanical Properties of Carbon Nanotube based Composites”, ‘Physica E: Low Dimensional systems & Nanostructures’, Vol. 43, Issue 8, pp. 1453-1460, 2011.

117. Kankar P.K., Satish C. Sharma, and Harsha S.P., “Rolling Element Bearing Fault Diagnosis Using Wavelet Transform”, ‘Neurocomputing’, Vol. 74, Issue 10, pp. 1638-1645, 2011.

118.Anand Y Joshi, S. P. Harsha, Satish C. Sharma, “Effect of chirality and atomic vacancies on dynamics of nano resonator based on SWCNT”, Sensor Review, Vol.31(1), pp.47-57,2011.

119.Anand Y Joshi, S. P. Harsha, Satish C. Sharma, “The Effect of Pinhole Defect on Vibration Characteristics of Single Walled Carbon Nanotube”, Physica E: Low Dimensional systems & Nanostructures, Vol. 43, Issue 5, pp.1040-1045, 2011.

120.Kankar P.K., Satish C. Sharma, and Harsha S.P., “Fault Diagnosis of Ball Bearings Using Continuous Wavelet Transform”, ‘Applied Soft Computing’, 11(2), pp .2300-2312, 2011.

121.Kankar P.K., Satish C. Sharma, and Harsha S.P., “Rolling Element Bearing Fault Diagnosis using Autocorrelation and Continuous Wavelet Transform”, ‘Journal of Vibration and Control’, 17(14), pp. 2081-2094, 2011.

2010

122.Satish C. Sharma, Pravin P. Patil, Ashish Vasudev, Satish C. Jain, “Performance Evaluation of an Indigenously Designed Copper (U) tube Coriolis Mass sensors”, ‘Journal of Measurement’, Vol. 43, No.9, pp1165-1172,2010.

123.E. Rajasekhar Nicodemus, Satish C. Sharma, A Study of Worn Hybrid Journal Bearing System with Different Recess Shapes Under Turbulent Regimes, “ASME Journal of Tribology”. Vol 132 pp.41704-12, 2010.

124.S. C. Jain, Satish C. Sharma, J.S. Basavaraja and Prashant Kushare, ‘Study of Two-Lobe Four Recessed Hybrid Journal Bearing’, ‘Industrial Lubrication and Tribology’, Vol 62, Issue 6, pp.332 – 340, 2010.

125.Anand Y Joshi, Aashish Bhatnagar, S. P. Harsha, Satish C. Sharma, Vibration Response Analysis of Doubly Clamped Single Walled Wavy Carbon Nanotube Based Nano Mechanical Sensors “ASME Journal of Nanotechnology in Engineering and Medicine”, Vol.1(3), pp.031004-1-5,2010.

126.Anand Y Joshi, S. P. Harsha, Satish C. Sharma, “Dynamic Behavior of Chiral Fixed Free Single Walled Carbon Nanotube Based Nano Mechanical Mass Sensors due to Atomic Vacancies” ‘IMech E, Part N: Journal of Nanoengineering and Nanosystems’, Vol. 224(2), pp.45-56,2010.

127.E. Rajasekhar Nicodemus, Satish C. Sharma, Influence of Wear on the Performance of Multirecess Hydrostatic Journal Bearing Operating with Micropolar Lubricant, “ASME Journal of Tribology” 132, 021703-1 to 021703- 10, 2010.

128.J. Sharana Basavaraja, Satish C. Sharma, Satish C. Jain “A Study of misaligned electrorheological fluid lubricated hole-entry hybrid journal bearing” “Tribology International”, Vol. 43, Issues 5-6, Pages 859-1200, 2010.

129.J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ‘The Study of ER Fluid Lubricated Misaligned Hole--Entry Hybrid Journal Bearing’, “Tribology International”, Vol.43, Issue 5-6, pp 1059-1064,2010.

130.Anand Y Joshi, Satish C. Sharma, S. P. Harsha, “Analysis of Crack Propagation in Fixed Free Single Walled Carbon Nanotube under Tensile Loading Using XFEM”, ASME Journal of Nanotechnology in Engineering and Medicine, 1, (4), 2010, 041008-7.

131.Anand Y Joshi, S. P. Harsha, Satish C. Sharma, “Dynamic Analysis of a Clamped Wavy Single Walled Carbon Nanotube based Nano Mechanical Sensors”, ASME Journal of Nanotechnology in Engineering and Medicine 1, (3), 2010, 031007-1-7

132.Pravin P Patil, Satish C. Sharma, S.C. Jain, “Prediction Modeling of Coriolis Type Mass Flow Sensor Using Neural Network”, Instruments and Experimental Techniques, Vol.54(3), pp.435-439,2010.

133.Pravin P. Patil, Satish C. Sharma, S.C. Jain, “Development of (Aluminium) ‘U’ Tube type Vibration Based Electromechanical Mass Flow Sensor", Sensors & Transducers Journal, vol.123, issue 12, pp.60-68, Dec. 2010.

134.S. C. Jain, Satish C. Sharma, J.S. Basavaraja and Prashant Kushare, ‘Study of Two-Lobe Four Recessed Hybrid Journal Bearing’, ‘Industrial Lubrication and Tribology’, Vol 62, Issue 6, pp.332 – 340, 2010.

135.Anand Y Joshi, S. P. Harsha, Satish C Sharma, “Vibration Signature Analysis of Single Walled Carbon Nanotube Based Nano Mechanical Sensors”, Physica E: Low Dimensional Systems & Nanostructures, 42, (8), pp.2115-2123,2010.

136.Anand Y Joshi, Aashish Bhatnagar, S. P. Harsha, Satish C. Sharma, “An Investigation of Mass Sensitivity of Fixed Free Single Walled Carbon Nanotube (SWCNT) Based Nano Mechanical Sensors”, Current NanoScience, 6(6), pp.598-603,2010.

137.Unnati A Joshi, Preeti Joshi, S.P. Harsha, Satish C. Sharma, “Evaluation of the Mechanical Properties of CNT based Composites Using Hexagonal RVE,” ASME Journal of Nanotechnology in Engineering & Medicine, 1(3) 031006-1-7,2010.

2009

138.Kankar P.K., Harsha S.P., Kumar Pradeep and Satish C. Sharma, “Fault Diagnosis of a Rotor Bearing System using Response Surface Method”, European Journal of Mechanics / A Solids, Vol. 28, 2009, pp. 841-857.

139.Unnati A Joshi, Satish C. Sharma, S.P. Harsha, “Effects of Pinhole defects on the elasticity of Carbon Nanotube based Nano-Composites” ASME Journal of Nanotechnology in Engineering & Medicine, 2,1, 011003-1-7.

140.J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ‘Study of Misaligned Roughened Multi-Lobe Hybrid Journal Bearing’, ‘Industrial Lubrication and Tribology’, Vol.61, no.4, pp.220-227,2009.

2008

141.R.K. Gautam, S. Ray, S.C. Jain and Satish C. Sharma, ‘Tribological Behaviour of (Cu–Cr–SiCp) In–Situ composite', ‘WEAR’, Vol. 265, pp. 902 – 912, 2008.

142.J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ‘Performance of an Orifice Compensated Two Lobe Hole – Entry Hybrid Journal Bearing’, Advances in Tribology, Vol 2008, Article ID 871952, 10 pages, doi:10.1155/2008/871952, 2008.

2007

143. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, 'Effect of Wear on the Performance of Non-Recessed Orifice Compensated Hybrid Journal Bearing', ‘STLE Tribology Transactions’, Vol. 50, No. 3, pp. 361 – 373, 2007.

144. T. Nagaraju, Satish C. Sharma, and S.C. Jain, 'Influence of Surface Roughness on Non-Newtonian Thermohydrostatic Performance of a Hole – Entry Hybrid Journal Bearing', ASME Journal of Tribology, Vol. 129, No. 3, pp. 595 – 602, 2007.

145.R.K. Awasthi, Satish C. Sharma and S.C. Jain, 'Performance of Worn Non – Recessed Hole – Entry Hybrid Journal Bearings,' “Tribology International”, Vol. 40, no.5, pp. 717 – 734, 2007.

2006

146.R.K. Awasthi, S.C. Jain, and Satish C. Sharma, 'Finite Element Analysis of Orifice Compensated Multiple Hole – Entry Worn Hybrid Journal Bearing', ‘Finite Elements in Analysis and Design’, Vol. 42, issues 14 – 15, pp. 1291 – 1303, Oct. 2006.

147.R.K. Awasthi, S.C. Jain, and Satish C. Sharma, 'A Simulation Study of Running in Wear Effect and its Influence on Average Flow Factors', ‘STLE Tribology Transactions’, Vol. 49, No. 3, pp. 427 – 438, 2006.

148.T. Nagaraju, Satish C. Sharma and S.C. Jain, 'Study of Orifice Compensated Hole – Entry Hybrid Journal Bearing Considering Surface Roughness and Flexibility Effects', Tribology International, Vol. 39, No. 7, pp. 715 -–725, 2006.

149.Vijay Kumar, Satish C. Sharma and S.C. Jain, 'On the Restrictor Design Parameter of Hybrid Journal Bearing for Optimum Rotordynamic Coefficients', Tribology International, Vol. 39, No.4, pp. 356 – 368, 2006.

2005

150.T. Nagaraju, Satish C. Sharma, and S.C. Jain, "The Stability Margin of Roughened Hole Entry Hybrid Journal Bearing System", ‘STLE Tribology Transactions’, Vol. 48, No.1, pp. 140-146, 2005.

2004

151.Satish C. Sharma, T Nagaraju, and S.C. Jain, "Performance of an Orifice Compensated Hole – Entry Hybrid Journal Bearing System Considering Surface Roughness and Thermal Effects", ‘STLE Tribology Transactions’, Vol. 47, No.4, pp. 557 – 556, 2004.

152.Vijay Kumar, Satish C. Sharma, and S.C. Jain, " Stability Margin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects", ASME Journal of Tribology, Vol. 126, No. 3, pp. 630 – 634, 2004.

153.Narendra Singh, Satish C. Sharma, S.C. Jain and Sanjeev Reddy, "Performance of Membrane Compensated Multirecess Hydrostatic / Hybrid Journal Bearing System Considering Various Recess Shapes", Tribology International, Vol. 37, No. 1, pp. 11 – 24, 2004.

2003

154.Satish C. Sharma, Vijay Kumar, S.C. Jain and T. Nagaraju, "Study of Hole – Entry Hybrid Journal Bearing System Considering Combined Influence of Thermal and Elastic Effects", Tribology International, Vol. 36, No. 12, pp. 903 – 920, 2003.

155.Vijay Kumar, Satish C. Sharma, and S.C. Jain, "On the Stability Margin of Hole – Entry Hybrid Journal Bearing Considering Viscosity Temperature Variation", ‘STLE Tribology Transactions’, Vol. 46, No. 3, pp. 421 – 427, 2003.

156.T. Nagaraju, Satish C. Sharma and S. C. Jain, ‘Performance of Externally Pressurized Non-Recessed Roughened Journal Bearing System Operating with Non-Newtonian Lubricant’, ‘STLE Tribology Transactions’, Vol.46, no.3, pp.404-413, 2003.

2002

157.Satish C. Sharma, T. Nagaraju and S. C. Jain, ‘Combined Influence of Journal Misalignment and Surface Roughness on the Performance of Orifice Compensated Non-Recessed Hybrid Journal Bearing’, ‘STLE Tribology Transactions’, Vol.45, no.4, pp 457- 463,2002.

158.Satish C. Sharma, Vijay Kumar, S. C. Jain, T. Nagaraju and Giriraj Prasad, ‘Thermohydrostatic Analysis of Slot-Entry Hybrid Journal Bearing’, Tribology International, Vol. 35, no.9, pp 561-577, 2002.

159.T. Nagaraju, Satish C. Sharma and S. C. Jain, ‘Influence of Surface Roughness Effects on Performance of Non-Recessed Hybrid Journal Bearings’, Tribology International, Vol. 35, no.7, pp 467-487, 2002

160.Satish C. Sharma, S. C. Jain and D. K. Bharuka, ‘Influence of Recess Shape on the Performance of a Capillary Compensated Circular Thrust Pad Bearing’, Tribology International, Vol. 35, no.6, pp 347-356, 2002.

2001

161.Satish C. Sharma, S.C. Jain and N. Madhu Mohan Reddy, ‘A Study of Non-Recessed Hybrid Flexible Journal Bearings with Different Restrictors’, ‘STLE Tribology Transactions’, Vol.44, No.2, pp. 310-317, 2001.

162.Satish C. Sharma, P.L. Sah, S.C. Jain and R. Sinhasan, ‘Static and Dynamic Performance Characteristics of Orifice Compensated Hydrostatic Flexible Journal Bearings with Non-Newtonian Lubricants’, ‘STLE Tribology Transactions’, Vol. 44, No.2, pp. 242-248, 2001.

163.Satish C. Sharma, M. Bhattacharya, Mohd. Khaliquzzama, Amar Sapra, Lalit K. Khandelwal, Mohd. Saif and Rajiv Harbindu, ‘Development of a Mass Flow Meter Based on Coriolis Effect’, International Journal of Mechanical Engineering Education, (IJMEE, U.K.), Vol.29, No.2, pp.132-146, 2001.

2000

164.Satish C. Sharma, S.C. Jain and P.L Sah, ‘Effect of Non-Linear Behaviour of Lubricant and Bearing Flexibility on the Performance of Slot-Entry Journal Bearings’, Tribology International, Vol. 33, no. 7, pp. 507-517, 2000.

1999

165.Satish C. Sharma, S.C. Jain and N. Madhu Mohan Reddy, ‘Influence of Elastic Effects on the Performance of Slot-Entry Journal Bearings’, Tribology International, Vol.32, no.10, pp. 537-551, 1999.

166.Satish C. Sharma, Vijay Kumar, S.C. Jain, R. Sinhasan and M. Subramanian, ‘A Study of Slot-Entry Hydrostatic/Hybrid Journal Bearing Using the FEM’, Tribology International, Vol.32, no.4, pp 185-196, 1999.

1998

167.Satish C. Sharma, ‘On the Application of Strain Gauges for a Structural Member Subjected to Complex Type of Loading’, International Journal of Mechanical Engineering Education, (IJMEE, U.K.), Vol. 26, No.3, pp. 241-246, 1998.

168.Satish C. Sharma, R. Sinhasan, S.C. Jain, N. Singh and S.K. Singh, ‘Performance of Hydrostatic/Hybrid Journal Bearings with Unconventional Recess Geometries’, ‘STLE Tribology Transactions’, Vol. 41, no.3, pp. 375-381, 1998.

1997

169.S.C. Jain, Satish C. Sharma and T. Nagaraju, ‘Misaligned Journal Effect in Liquid Hydrostatic Nonrecessed Journal Bearings’, ‘WEAR’, Vol. 210, pp. 67-75, 1997.

1995

170.Satish C. Sharma, S.C. Jain,R. Sinhasan and R. Shalia, ‘Comparative Study of the Performance of Six pocket and Four pocket Hydrostatic/Hybrid Flexible Journal Bearings’, Tribology International, Vol.28, No. 8,pp. 531-539,1995.

1993

171.Satish C. Sharma, R. Sinhasan, and S.C. Jain, ‘An Elastohydrostatic Study of Hole-Entry Hybrid Flexible Journal Bearing with Capillary Restrictors’, Tribology International, Vol. 26, No.2, pp. 93-107, 1993.

1992

172.S.C. Jain, R. Sinhasan and Satish C. Sharma, ‘Analytical Study of Flexible Hybrid Journal Bearing System using Different Flow Control Devices’, Tribology International, Vol. 25, No.6, pp. 387-395, 1992.

173.Satish C. Sharma, S.C. Jain and R. Sinhasan, ‘Performance Characteristics of Constant Flow Valve Compensated Multiple Hole Entry Hybrid Flexible Journal Bearings’, Periodica Polytechnica, Budapest (Hungary)., Vol. 36, No.1, pp.61-84, 1992.

174.Satish C. Sharma, R. Sinhasan, and S.C. Jain, ‘Performance Characteristics of Multirecess Hydrostatic/Hybrid Flexible Journal Bearing with Membrane Type Variable Flow Restrictor Compensating Element’, ‘WEAR’, Vol. 152, pp.279-300, 1992.

1991

175.R. Sinhasan, Satish C. Sharma and S.C. Jain, ‘Performance Characteristics of Externally Pressurised Orifice Compensated Flexible Journal Bearing’, ‘STLE Tribology Transactions’, Vol. 34, No.3, pp. 465-471, 1991.

1990

176.Satish C. Sharma, R. Sinhasan and S.C. Jain, ‘Elastohydrostatic Analysis of Orifice Compensated Multiple Hole-Entry Hybrid Journal Bearings’, International Journal of Machine Tools and Manufacture, Vol. 30, No. 1, pp. 111-129, 1990.

1989

177.R.Sinhasan, Satish C. Sharma and S.C. Jain, ‘Performance Characteristics of Constant Flow Valve Compensated Multirecess Flexible Hydrostatic Journal Bearing’, ‘WEAR’, Vol. 134, pp. 335-356, 1989.

178.Sinhasan, Satish C. Sharma and S.C. Jain, ‘Performance Characteristics of an Externally Pressurised Capillary Compensated Flexible Journal Bearing’, Tribology International, Vol. 22, No.4, pp. 283-293, 1989.

1988

179.R. Sinhasan, S.C. Jain and Satish C. Sharma, ‘A Comparative Study of Flexible Thrust Pad Hydrostatic Bearings with different Restrictors’, ‘WEAR’, Vol. 121, pp. 53-70, 1988.

1986

180.R. Sinhasan, S.C. Jain and Satish C. Sharma, ‘Elastic Considerations in the Hydrostatic Lubrication of Capillary Compensated Thrust Bearings of Different Configurations’, ‘WEAR’, Vol. 3, No.1, pp. 41-62, 1986.

181.R. Sinhasan, S.C. Jain and Satish C. Sharma, ‘Orifice Compensated Flexible Thrust Pad Bearings of Different Configurations’, Tribology International, Vol. 19, No. 5, pp. 244-252, 1986.

983

182.R. Sinhasan, S.C. Jain and Satish C. Sharma, ‘Elastohydrostatic Lubrication of Capillary Compensated Thrust Pad Bearings’, ‘WEAR’, Vol. 91, pp. 131-147, 1983.

Publications

1. Vivek Gupta, V.H. Saran and Satish C. Sharma, “A novel technique to measure the rolling resistance of tyres using force transducer”, Journal of The Institution of Engineers (India): Series C 96.3 (2015): 325-330.

2. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, ‘Effect of Running-in Wear on the Performance Characteristics of a Hydrodynamic Journal Bearing System’ Indian Journal of Tribology, Vol.4, no.1, Jan.-June 2009, pp1-13.

3. J.S. Basavaraja, S.C. Jain, and Satish C. Sharma, ' Constant flow valve compensated Hole-Entry Hybrid Journal Bearing Lubricated with ER Fluid,' Indian Journal of Tribology, Vol.4, no1, Jan.-June 2009, pp.43-51.

4. Suren Kumar, Akhilesh Dwivedi, Sumit Wadhwa, and Satish C. Sharma, ‘Vision Based Lane Detection for Autonomous Navigation’ IURS Journal of Unmanned Robotic Vehicles and Intelligent System’ Vol. 1, Issue 1, pp. 97 – 100, Sept. 2007.

5. Vijay Kumar, Satish C. Sharma, S.C. Jain and T. Nagaraju, 'Comparative Performance of Hole-Entry Journal Bearing Operating with Different Restrictors', Journal of Institution of Engineering, IE(I) – Journal MC, Vol. 83, October 2002, pp. 116 – 123.

6. S.C. Jain, Satish C. Sharma and N. Ramesh Babu, ‘Performance Characteristics of Multirecess Hybrid Flexible Journal Bearing in Turbulent Regime’, Journal of Institution of Engineers (India), Vol. 81, Pt Mc/1, pp. 1-8, May, 2000.

7. P.L. Sah, Satish C. Sharma, S.C. Jain and R. Sinhasan, ‘A Study of Constant Flow Valve Compensated Multirecess Hydrostatic/Hybrid Flexible Journal Bearing Operating with Non-Newtonian Lubricants’, Journal of Institution of Engineers, Vol. 81, Pt Mc/2, pp. 84-92, 2000.

Books

Satish C. Sharma, “Tribology in Machine Components” Book Chapter from Tribology for Scientists and Engineers: From Basics to Advanced Concepts, Springer New York, USA, pp 821-879, 2013.
Sahani A K, Jain P K and Sharma Satish C, “Geometrical Tolerance Stack up Techniques”, Chapter 52 in DAAAM International Scientific Book, Vienna Austria, pp 857-872, 2013.
Pravin P Patil, Satish C. Sharma, S.C. Jain, Modeling Copper omega type Coriolis Mass Flow Sensor with an aid of ANFIS tool, Advances in Intelligent and Soft Computing – series Part-II, Springer, pp.131-140,2011.

Publications

1. Satish C. Sharma, Vijay Kumar, S.C, Jain, R. Sinhasan and M. Subramanian, ‘A Study on Characteristics of Slot-Entry Journal Bearing Using the FEM’, Proceedings of World Tribology Congress, Abstracts of Papers, Sept. 8-12, 1997 (London), pp. 426, MEP (U.K.).

Publications

1. Abhishek kumar, Satish C. Sharma, “ER Lubricated Recessed Conical Hybrid Journal Bearing System Compensated With Orifice Restrictor”, TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

2. Adesh Kumar Tomar and Satish C. Sharma, “Performance of Textured Hybrid Hole-Entry Spherical Journal Bearing Lubricated with ER Lubricant” TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

3. Anil Singh, Satish C. Sharma, “A Study on the Performance of Porous Hybrid Plain Journal Bearing Considering the Effect of Surface Irregularities”, TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

4. Nitin Agrawal and Satish C. Sharma, “FEM Analysis of a Hybrid Spherical Constant Flow Valve Compensated Thrust Bearing” TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

5. Narendra Kumar and Satish C. Sharma, “A study of ER Lubrication on the Performance of Hybrid Annular Recess Thrust Pad Bearing Compensated with Constant Flow Valve Restrictor” TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

6. Krishnkant Sahu, Satish C. Sharma, “Influence of ER Lubricant Behavior on 2-Lobe geometrically Imperfect Slot Entry Hybrid Journal Bearing” TRIBOINDIA 2021: An International Virtual Tribology Conference held on 02 – 04 December 2021 at Saintgits College of Engineering (Autonomous), Kottayam, Kerala.

7. Adesh Kumar Tomar, Satish C. Sharma, “Influence of span angle on the performance of hole-entry hybrid spherical journal”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

8. Krishnkant Sahu, Satish C. Sharma, “Influence of textured shapes in hybrid slot entry journal bearing”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

9. Nitin Agrawal, Satish C. Sharma, “Study of a Hybrid Spherical Capillary Compensated Thrust Bearing”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

10. Abhishek kumar, Satish C. Sharma, “On the behaviour of asymmetric conical hole-entry hybrid journal bearing system”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

11. Anil Singh, Satish C. Sharma, “FEM Analysis of a Porous Hybrid Journal Bearing Under the Turbulent Regime”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

12. Narendra kumar, Satish C. Sharma, “Effect of semi-cone angle on the performance of hybrid slot-entry conical journal”, Virtual International Conference (TRIBOINDIA -2020), SRM Institute of Science and Technology, Kattankulathur, Tamil Nadu, India, December 10-12, 2020.

13. Satish C. Sharma, Vivek kumar, “Performance of textured surface hybrid thrust pad bearing considering micro-roughness”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

14. Krishnkant Sahu, Satish C. Sharma, “A study on Grooved Slot-entry hybrid journal bearing system”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

15. Adesh K. Tomar, Satish C. Sharma, “Performance analysis of five pocket capillary compensated hybrid journal bearing operating with Non-Newtonian lubricant”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

16. Abhishek Kumar, Satish C. Sharma, “Influence of Geometric Errors in Conical Hybrid Journal Bearing Compensated with Capillary Restrictor”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

17. Anil Singh, Satish C. Sharma, “A study of a constant flow valve compensated three pocket hybrid journal bearing operating with micropolar lubricant”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

18. Nitin Agrawal, Satish C. Sharma, “Performance analysis of hybrid circular thrust bearing operating with Electro-rheological lubricant”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

19. Vivek kumar, Satish C. Sharma, “Elastohydrostatic Lubrication of Control Flow Valve Compensated Thrust Bearing”, International Conference on Industrial Tribology (ICIT -2019), IISc Bangalore, India, December 01-04, 2019.

20. Sharma C. Satish, and Chandra B. Khatri " Performance of textured 3-lobe slot-entry hybrid journal bearing system operating with electro-rheological (ER) lubricant " 73^rd STLE Annual Meeting & Exhibition 2016, Minneapolis, (USA), May 20-24, 2018.

21. Vivek Kumar and Sharma C. Satish " Performance of hydrostatic thrust pad bearings operating with electrically conducting lubricant" 73^rd STLE Annual Meeting & Exhibition 2016, Minneapolis, (USA), May 20-24, 2018.

22. Satish C. Sharma, Chandra B. Khatri, “Performance of textured two-lobe slot-entry hybrid journal bearing system operating with electro-rheological lubricant”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

23. Chandra B. Khatri, Satish C. Sharma, “A study on the performance of 3-lobe hole-entry hybrid journal bearing system under the combined influence of micropolar lubricant and textured surface”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

24. Krishnkant Sahu, Satish C. Sharma, “Performance Analysis of Geometrically Imperfect Slot Entry Hybrid Journal Bearing System”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

25. Saurabh Kumar Yadav, Nathi Ram, Satish C. Sharma, “Influence of non-Newtonian lubricant behavior on the performance of flexible rotor system supported by fluid film bearing”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

26. Vivek Kumar, Satish C. Sharma, “Dynamic characteristics of hydrostatic thrust pad bearing operating with micropolar lubricant”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

27. Nathi Ram, Saurabh Kumar Yadav, Satish C. Sharma, “Analysis of Asymmetric Slot-Entry Journal Bearing under Turbulent Regime”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

28. Prashant B. Kushare, Satish C. Sharma, “Performance of Non-Newtonian Lubricated Worn 2-Lobe Slot Entry Restrictor Bearing System”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

29. Suresh Jadhav, Gananath D. Thakre, Satish C. Sharma, “An Investigation on the Tribo-performance of Brass-On-Steel EHL Point Contacts”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

30. Abhishek Kumar, Satish C. Sharma, “Influence of surface waviness on the dynamic performance of circular hole-entry hybrid journal bearing system”, International Conference on Industrial Tribology (ICIT -2017), Kolkata, India, 2017.

31. Sharma C. Satish, and Dharmendra Jain. "Effect of Geometrically Imperfect Journal and Recess Geometry on the Performance of Two Lobe/Circular 4 Pocket Hybrid Journal Bearing System." 71th STLE Annual Meeting & Exhibition 2016, Las, Vegas (USA), May 15-19, 2016

32. Satish C. Sharma, Saurabh K. Yadav, “Influence of tilt on the performance of circular trust pad bearing of various recess shapes” STLE 70th Annual Meeting & Exhibition 2015, Dallas, Texas(USA), May 17-21, 2015.

33. Saurabh K. Yadav, Satish C. Sharma, “Performance of full textured hybrid thrust bearing by considering the temperature variation in oil film” STLE 70th Annual Meeting & Exhibition 2015, Dallas, Texas(USA), May 17-21, 2015.

34. Prashant B.Kushare and Satish C.Sharma, “Surface roughness effect on the Performance of 3-lobe symmetric hole entry hybrid journal bearings”, International Mechanical Engineering Congress (IMEC-2014), NIT Tiruchirappalli, India. Paper Abstract ID: IMEC 2014-G-015, June 13-15, 2014.

35. Satish C. Sharma, Arvind K. Rajput, “Study of Geometrically Imperfect Multirecess Hybrid Journal Bearing System with different Pocket Geometries” STLE 68th Annual Meeting & Exhibition 2013, Lake Buena Vista, Florida. May 18-22, 2014.

36. S. S. Harak, Satish C. Sharma and S. P. Harsha, Structural dynamic analysis of freight railway wagon using finite element method, Presented at 3rd International Conference on Materials Processing and Characterisation (ICMPC 2014), Hyderabad, India (March 2014).

37. Arvind K. Rajput, Satish C. Sharma, “Influence of geometrically imperfect misaligned journal on the performance of CFV compensated 4 pocket hybrid journal bearing”, International Conference on Advances in Tribology (ICAT -2014), NIT Calicut, India. pp. Feb. 21-24, 2014.

38. Prashant B. Kushare and Satish C.Sharma, “Influence of Wear on the Performance Analysis of Non-Circular Non-Recessed Hybrid Journal Bearing Configurations”, International Conference on Advances in Tribology (ICAT-2014), NIT Calicut, India. Paper No.183, Feb. 21-24, 2014.

39. Saurabh Kumar Yadav and Satish C Sharma, “Performance analysis of a partial textured hydrodynamic thrust bearing operating with non-Newtonian lubricant” International Conference on Advances in Tribology (ICAT-2014), NIT Calicut, India, 21-24 Feb, 2014.

40. Saurabh Kumar Yadav and Satish C. Sharma, “Combined influence of tilt on the performance of hybrid thrust bearing system operating with non-Newtonian Lubricant”, ASIATRIB-2014, Agra 17-20 Feb 2014.

41. Satish C. Sharma, Arvind K. Rajput, “A Study of Orifice compensated geometric imperfect four pocket hydrostatic Journal bearing Operating with Micropolar Lubricant”, ASIATRIB -2014, Hotel Jaypee Palace, Agra, (India). Paper Id- TSI914544, Feb. 17-20, 2014.

42. Arvind K. Rajput, Satish C. Sharma, “Effect of undulations of the journal on the performance of multi-recess conical hybrid journal bearing”, ASIATRIB -2014, Hotel Jaypee Palace, Agra, (India). Paper Id- TSI914545, Feb. 17-20, 2014.

43. Prashant B.Kushare and Satish C.Sharma , “Performance of Two Lobe Hole Entry Worn Hybrid Journal Bearing System Operating with Non-Newtonian Lubricant”, ASIATRIB-2014, Hotel Jaypee Palace, Agra, (India). Paper Id- TSI914531, Feb. 17-20, 2014.

44. Satish C. Sharma Arvind K. Rajput, “Influence of Geometric Irregularities of Journal on the Performance of Capillary Compensated Multirecess Hydrostatic Journal Bearing” STLE 68th Annual Meeting & Exhibition 2013, Detroit, Michigan (USA). Control ID: 1531772, May 07, 2013

45. Arvind K. Rajput, Satish C. Sharma, “Stability of a Constant Flow Valve Compensated Multirecess Conical Hybrid Journal Bearing Operating with Micropolar Lubricant” ITS 2013, Lulea university of Technology, Lulea, Sweden, 19-21 March 2013.

46. Satish C. Sharma, Ram Nathi, “Combined Influence of Surface roughness and Micropolar Lubricant on the Performance of Constant Valve Compensated Hole-Entry Hybrid Journal Bearing”, International Conference on Industrial Tribology (ICIT-2012), Pune, India.TSI-812517.

47. Ram Nathi, Satish C. Sharma, “Influence of Couple Stress Lubricant on the Performance of Symmetric and Asymmetric Hole-Entry Hybrid Journal Bearing”, International Conference on Industrial Tribology (ICIT-2012), Pune, India.TSI-812518.

48. Vikas M. Phalle, Satish C. Sharma, “Influence of Wear Depth Parameter on the Performance of Four Pocket/Six Pocket Hybrid Conical Journal Bearing System”, International Conference on Industrial Tribology (ICIT-2012), Pune, India. TSI-812531.

49. Arvind K. Rajput, Satish C. Sharma, “A Study of Orifice Compensated 4-Pocket Conical Hydrostatic Journal Bearing operating with Micropolar Lubricant”, International Conference on Industrial Tribology (ICIT-2012), Pune, India. TSI-812572.

50. Prashant B. Kushare, Satish C. Sharma, “Performance evalution of Two Lobe Multirecesss Worn Hybrid journal bearing operating under turbulent regime”, International Conference on Industrial Tribology (ICIT-2012), Pune, India.TSI-812598.

51. Saurabh K. Yadav,Satish C. Sharma, “ Study On The Influence of Operating Parameters On The Elastohydrodynamically Lubricated Gear Contacts”, International Conference on Industrial Tribology (ICIT-2012), Pune, India.TSI-812601.

52. Satish C. Sharma, Ram Nathi, “Influence of Couple Stress Lubricant on the Performance of Orifice Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing”, STLE/ASME 2012 International Joint Tribology Conference, IJTC2012, Westin Denver Downtown, Denver, Colorado. (USA), October 7-10, 2012, Paper No. IJTC2011-61087, 2012.

53. Satish C. Sharma, Nathi Ram, “Influence of Micropolar Lubricants on the performance of an Orifice Compensated Rough Hole-Entry Hybrid Journal Bearing”, Proceedings of 67^th STLE2012 Annual Meeting & Exhibition, St. Louis, Missouri (USA), May 6-10, Manuscript ID-1244039, 2012.

54. Nathi Ram, Satish C. Sharma, “Performance of Constant Flow Valve Compensated Hole-Entry Hybrid Journal Bearing operating with Couple Stress Lubricant”, Proceedings of 67^th STLE2012, Annual Meeting & Exhibition, St. Louis, Missouri (USA), May 6-10, Manuscript ID-1244032, 2012.

55. Anand Y Joshi, Satish C Sharma, S.P.Harsha, “Analysis of Single walled Carbon Nanotubes with multiple defects”, Proceedings of the International conference on Fourth International conference on Structural Stability and Dynamics (ICSSD-2012), organized by Department of Structural Engineering, Malaviya National Institute of Technology (MNIT), Jaipur, January 4 – 6, 2012, 996.

56. Vikas M. Phalle, Satish C. Sharma and S.C. Jain, “Influence of wear on the performance of a 2-lobe four-pocket hydrostatic journal bearing compensated with capillary restrictor,” Proc. of the 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), S.V. National Institute of Technology, Surat, Gujarat, India, June 06-08 2011, pp.783-787,2011.

57. Nathi Ram, Satish C. Sharma, “Performance of a Constant Flow Valve compensated Non-Recessed Hole-Entry Hybrid Journal Bearing operating with Micropolar Lubricant”, STLE/ASME 2011 International Joint Tribology Conference, IJTC2011, Marriott Los Angeles, California (USA), October 24-26, Paper No. IJTC2011-61087, 2011.

58. Nathi Ram, Devendra Sankla, Arvind K. Rajput and Satish C. Sharma, “Performance of an Orifice Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing Operating in Turbulent regime”, Proceedings of ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE-2011, Washington, DC (USA), August 28-31, 2011.

59. Arvind K. Rajput and Satish C. Sharma, “A Parametric study of ‘S’ Shape Coriolis Mass flow meter”, Proc. Of 1^st International conference for Materials and Applications for Sensors and Transducers (ICMAST-2011) Kos Island, Greece during May 13-17, 2011.

60. Arvind K. Rajput and Satish C. Sharma, “An experimental study of ‘S’ Shape (copper) Coriolis Mass flow Sensor”, Proc. Of 5^th International conference on Advances in mechanical engineering (ICAME-2011) SVNIT,Surat , Gujrat(India), June 06-08,2011.

61. Vikas M. Phalle, Satish C. Sharma and S.C. Jain, Influence of Wear on the Performance of a 2-Lobe Four-Pocket Hydrostatic Journal Bearing Compensated with Capillary Restrictor”, Proc. of the 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), S.V. National Institute of Technology, Surat, Gujarat, India, June 06-08, 2011

62. Nathi Ram, Devendra Sankla, Satish C. Sharma, “Performance of a Constant Flow Valve Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing Operating in Turbulent Regime”, STLE Annual Meeting, Atlanta, Georgia (USA), on May 15-19, 2011.

63. Satish C. Sharma and Nathi Ram, “Performance of an Orifice Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing Operating with Micropolar Lubricant”, STLE Annual Meeting, Atlanta, Georgia (USA), on May 15-19, 2011.

64. Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, “Influence of Wear and Method of Compensation on the Performance of 2-Lobe Multirecess Hybrid Journal Bearing System”, STLE-2011, Hilton Atlanta,255 Courtland St Ne,Atlanta, Ga. (USA), May 15-19, 2011.

65. P.K. Kankar, Satish C. Sharma and S.P. Harsha, Fault Diagnosis of Rolling Element Bearings Using Artificial Neural Networks and Self Organizing Maps Using Complex Morlet Wavelet, Proceedings of the 7^th International Conference on Industrial Tribology, December 2-4, 2010, Ispat Bhawan, Ranchi, India.

66. Nathi Ram, Satish C. Sharmaand S. C. Jain, “A capillary compensated hole-entry hybrid misaligned journal bearing operating in turbulent regime”, 7^th International Conference on Industrial Tribology, ICIT-2010, Ispat Bhawan, Ranchi, India, Dec. 1-4, 2010.

67. Nathi Ram, Satish C. Sharma and S. C. Jain, “Influence of journal misalignment and wear on the performance of constant flow valve compensated non-recessed hybrid journal bearing operating in turbulent regime”, Paper no: A065, 7^th International Conference on Industrial Tribology, ICIT-2010, Ispat Bhawan, Ranchi, India, Dec. 1-4, 2010.

68. Vikas M. Phalle, Satish C. Sharma and S. C. Jain, “Performance characteristics of 3-lobe four-pocket hybrid journal bearing system compensated with orifice restrictor by considering the influence of wear”, Paper no: A064, 7^th International Conference on Industrial Tribology, ICIT-2010, Ispat Bhawan, Ranchi, India, Dec. 1-4, 2010.

69. Satish C. Sharma and E. Rajasekhar Nicodemus, “A comparative study of a multirecess hybrid worn journal bearing system operating in turbulence regime compensated with different flow control devices”, Proceedings of International joint tribology conference 2010, Paper no: 41027, San Francisco, Oct 18-20, 2010.

70. Satish C. Sharma, Vikas M. Phalle and S. C. Jain, ‘Performance of Noncircular 2-Lobe Multirecess Constant Flow Valve Compensated Hybrid Journal Bearing by Considering Wear’, Proceedings of STLE Annual Meeting, Las Vegas, Nevada, on May 16-20, 2010.

71. Sharma Satish C., Nathi Ram, Jain S.C., “Combined Influence of Journal Misalignment and Wear on the performance of Orifice Compensated Non-Recessed Hybrid Journal Bearing in Turbulent Regime”, Accepted for Presentation in STLE Annual Meeting, Las Vegas, Nevada, on May 16-20, 2010.

72. P.K. Kankar, S. P. Harsha and Satish C. Sharma, ‘A Comparative study on Bearing Faults Classification by ANN and SOM using Complex Morlet Wavelet’, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.

73. P.K. Kankar, S. P. Harsha and Satish C. Sharma, ‘Vibration Monitoring of Localized defects in Rolling Element Bearings’, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.

74. P. K. Kankar, Satish C. Sharma and S. P. Harsha, ‘Vibration based Fault Diagnosis of Rolling Element Bearings using Response Surface Method, 54^th Congress of ISTAM (An International Meet), Netaji Subhas Institute of Technology, New Delhi, December 18-21, 2009.

75. Anand Y. Joshi, Satish C. Sharma and S. P. Harsha, ‘Mass Sensitivity of Single Walled Carbon Nano-Tube Based Nano Mechanical Resonators’, 54^th Congress of ISTAM (An International Meet), Netaji Subhas Institute of Technology, New Delhi, December 18-21, 2009.

76. Pravin P Patil, Satish C. Sharma, Prabhakar Singh, S.C.Jain, “Finite Element Modeling of Vibration Based Mass Flow Sensors”, Proceedings of 54^th Congress of ISTAM (An International Meet), Netaji Subhas Institute of Technology, New Delhi, December 18-21, 2009.

77. Vikas M. Phalle, Satish C. Sharma, and S. C. Jain, ‘A Study of Noncircular 2-Lobe Multirecess Hydrostatic Worn Journal Bearing with Orifice Compensation’, Proceedings of 54^th Congress of ISTAM (An International Meet), Netaji Subhas Institute of Technology, New Delhi, December 18-21, 2009.

78. E. Vijaya Kumar, Vikas M. Phalle, Satish C. Sharma and S. C. Jain, ‘Performance of 4-pocket capillary compensated worn hybrid journal bearing’ 3^rd international Congress on Computational Mechanics and Simulation (ICCMS09) IIT-Bombay, Mumbai-400 076, INDIA, December 1-5, 2009.

79. Vijay Kumar E, Vikas M. Phalle, Satish C. Sharma, S.C. Jain, ‘Analysis of a worn Multirecess Hydroststatic Journal Bearing System’, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and information in Engineering Conference, Proceedings of IDETC/CIE-2009, August 30- Sept. 2, 2009, San Diego, Californiia USA, Paper No. DETC 2009-86787.

80. Rakesh Kamra, S. H. Upadhyay, P.K. Kankar, S. C. Jain, Satish C. Sharma and S. P. Harsha, ‘ANN Based Fault Diagnosis of Rolling Element Bearings’, Proceedings of IUTAM Symposium on Emerging Trends in Rotor Dynamics’, Paper-31, March 23-26, 2009, Delhi, India.

81. P. K. Kankar, Kalyan Manohar B., Aashish B., Satish C. Sharma and S. P. Harsha, ‘Vibration Based Fault Diagnosis of Rolling Element Bearings using Artificial Neural Networks and Support Vector Machines’, Proceedings of Conference on Dynamics, Vibration and Control, August 10-15, 2009, Chengdu, China.

82. Aashish Bhatnagar, P. K. Kankar, Satish C. Sharma and S. P. Harsha, ‘ANN Based fault classification of High speed ball bearings’, Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 30-September 2, 2009, San Diego, California, USA.

83. Kalyan M. Bhavaraju, P. K. Kankar, Satish C. Sharma and S. P. Harsha, ‘Fault Diagnosis of Ball Bearings using Soft Computing’, Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 30-September 2, 2009, San Diego, California, USA.

84. P. K. Kankar, Satish C. Sharma and S. P. Harsha, ‘Vibration Signature Analysis of a Rotor Bearing System using Response Surface Method’, Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 30-September 2, 2009, San Diego, California, USA.

85. Vijay Kumar E, Vikas M. Phalle, Satish C. Sharma, S.C. Jain, ‘Analysis of a worn Multirecess Hydroststatic Journal Bearing System’, Proceedings of ASME 2009 International Design Engineering Technical Conferences & Computers and information in Engineering Conference, IDETC/CIE-2009, August 30- Sept. 2, 2009, San Diego, Californiia USA, Paper No. DETC 2009-86787.

86. J. S. Basavaraja, S. C. Jain, Satish C. Sharma, ‘Influence of ER Fluid Lubrication on the Performance of a Rough Hole-Entry Hybrid Journal Bearing System’, Proceedings of IUTAM Symposium on Emerging Trends in Rotor Dynamics, IIT Delhi, India, March 23-26, 2009.

87. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, ‘Static Performance of Capillary Compensated Multiple Hole-Entry Hybrid Worn Journal Bearing in Turbulence Regime’ Proceedings of International Conference on Industrial Tribology (ICIT 2008) New Delhi, Nov. 6-8, 2008.

88. J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ‘The Study of ER Fluid Lubricated Misaligned Hole--Entry Hybrid Journal Bearing’, 2^nd International Conference on Advanced Tribology 2008, National Singapore University, Singapore, Dec. 3-5, 2008.

89. S. P. Harsha and Satish C. Sharma, “Nonlinear Dynamics of High Speed Unbalanced Rotor Supported on Rolling Element Bearings due to Waviness”, Proceedings of International Conference on Industrial Tribology (ICIT 2008), New Delhi, Nov. 6-8, 2008.

90. J.S. Basavaraja, S.C. Jain and Satish C. Sharma, ‘Constant Flow Valve Compensated Hole-Entry Hybrid Journal Bearing Lubricated with ER Fluid’, Proceedings of International Conference on Industrial Tribology (ICIT 2008), New Delhi, Nov. 6-8, 2008.

91. S.C. Jain, J.S. Basavaraja and Satish C. Sharma, ‘Performance of a Misaligned Two Lobe Hole-Entry Hybrid Journal Bearing’, Proceedings of International Conference on Industrial Tribology (ICIT 2008), New Delhi, Nov. 6-8, 2008.

92. Satish C. Sharma, J.S. Basavaraja and S.C. Jain, 'A Comparative Study on the Performance of Circular, Two-Lobe and Three-Lobe Hole-Entry Hybrid Journal Bearing', Proceedings of International Conference on Industrial Tribology (ICIT 2008), New Delhi, Nov. 6-8, 2008.

93. J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ‘The Effect of Geometry on the Performance of the Hole-Entry Hybrid Journal Bearing Lubricated with ER Fluid’, Proc of 11^thConference on Electrorheological Fluids and Magnetorheological Suspensions, Technical University Dresden, Germany, Aug. 25-29, 2008.

94. J.S. Basavaraja, S.C. Jain and Satish C. Sharma, ‘A Study of Smart Fluid Lubricated Non-Recessed Hybrid Journal Bearing’, Presented at Fifth ISSS International Conference on Smart Materials, Structures and Systems’, IISc Bangalore, July 24-26, 2008, Paper No. 81.

95. J.S. Basavaraja, S.C. Jain and Satish C. Sharma, ‘The Effect of Journal Misalignment on the Performance of Non-Recessed Hybrid Journal Bearing Lubricated with ER Fluid’, Proceedings of Twelths Nonlinear Vibrations, Dynamics, and Multibody Systems, June 1-5, 2008, Virginia Tech, Blacksburg, VA(USA).

96. J.S. Basavaraja, Satish C. Sharma, and S.C. Jain, ' A Simulation Study of Rough Hole-Entry Hybrid Journal Bearing Lubricated with ER Fluid,' ICAME Conference, IISc Bangalore, July 2-4, 2008.

97. K. Jagadeesha, T. Nagaraju, Satish C. Sharma, and S.C. Jain, ‘Transient Non – Newtonian Thermohydrodynamic Analysis of a Dynamically Loaded Journal Bearing with 3D Surface Roughness Effects’, Proc. of 63^rd STLE Annual Meeting, Cleaveland Ohio, USA, May 18 – 22, 2008.

98. Satish C. Sharma, S.C. Jain, J.S. Basavaraja, and Neeraj Sharma, ‘Combined Influence of Pocket Size and Journal Misalignment on the Performance of Hole – Entry Hybrid Journal Bearing System’, Proc. of 63^rd STLE Annual Meeting, Cleaveland Ohio, USA, May 18 – 22, 2008, Abstract ID No. 393906.

99. S.C. Jain, Satish C. Sharma, J.S. Basavaraja and Pranshat Kushare, ‘A Study of Two Lobe Four Recessed Compensated Hybrid Journal Bearing System’, Proc. of 63^rd STLE Annual Meeting, Cleaveland Ohio, USA, May 18 – 22, 2008, Abstract ID No. 393860.

100. T. Nagaraju, Sharana Basavaraja J., S.C. Jain, and Satish C. Sharma, 'A Study of Orifice Compensated Multilobe Hole – Entry Hybrid Journal Bearing', Proc. of 21^st Biennial Conference on Mechanical Vibration and Noise (IDETC 2007), Las Vegas, Nevada, USA, September 04 -–07, 2007, Paper No. 35923.

101. Prashant Kushare, Satish C. Sharma, S.C. Jain and Sharana Basavaraja J., ‘Performance of Two Lobe Multirecess Hybrid Journal Bearing Compensated with Capilary Restrictor', Proc. of STLE/ASME Internaitonal Joint Tribology Conference (IJTC2007), San Diego, California, USA, October 22 – 24, 2007, Paper No. 44433.

102. Jagadeesha K.M., Nagaraju T., Satish C. Sharma, and S.C. Jain, 'Transient Non – Newtonian Analysis of a Rough Journal Bearing', International Conference on Industrial Tribology, IISc Bangalore, Nov. 30 – Dec. 02, pp. 672 - 680, 2006.

103. Paras Kumar, Satish C. Sharma, and S.C. Jain, 'A Study on the Performance of a TCF Multirecess Hydrostatic/Hybrid Journal Bearing', International Conference on Industrial Tribology, IISc Bangalore, Nov. 30 – Dec. 02, 2006, pp. 688 - 703, 2006.

104. Awasthi R.K., Satish C. Sharma, and S.C. Jain, 'Effect of Turbulence on the performance of non – Recessed Hole Entry Hybrid Journal Bearing System', International Conference on Industrial Tribology, Nov. 30 – Dec. 02, 2006, IISc Bangalore, pp. 146 – 153, 2006.

105. Sharana Basavaraja J., S.C. Jain, and Satish C. Sharma, 'Performance of a Multilobe Hole –Entry Hybrid Journal Bearing', International Conference on Industrial Tribology, Nov. 30 – Dec. 02, 2006, IISc Bangalore, pp. 135 – 146, 2006.

106. T. Nagaraju, Satish C. Sharma, and S.C. Jain, 'Influence of Surface Roughness on Non – Newtonian Thermohydrostatic Performance of Hole – Entry Hybrid Journal Bearing', Proceedings of IJTC, Oct. 23 – 25, San Antonio, Texas, 2006, (U.S.A.) Paper No.: IJTC: 12101.

107. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, 'Effect of Wear on the Performance of Non – Recessed Orifice Compensated Hybrid Journal Bearing', Proceedings of Published in 61^st STLE Annual Meeting, Calgary, Canada, May 7-11, 2006, Paper No.: AM (NP)-06-01.

108. Vijay Kumar, Satish C. Sharma and S.C. Jain, “Journal Motion Simulation of Hybrid Journal Bearing Considering Viscosity Variation due to Temperature Change”, Proceedings of IMECE 2005, Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Nov. 5-11, 2005 Orlando, Florida, U.S.A.

109. R.K. Awasthi, Satish C. Sharma and S.C. Jain, 'Influence of Grid on Average Flow Factors for Isotropic Surface Roughness in Hydrodynamic Lubrication', Proceedings of International Conference on Industrial Tribology, ICIT – 04, Mumbai, Dec. 15 – 18, 2004, pp. 337 – 343.

110. R.K. Awasthi, S.C. Jain and Satish C. Sharma, 'Code Development for the Analysis a Finite Journal Bearing System using Matlab', Proceedings of International Conference on Industrial Tribology, ICIT – 04, Mumbai, Dec. 15 – 18, 2004, pp. 501 – 507.

111. M. Bhasker Rao, Satish C. Sharma, S.C. Jain and R.K. Awasthi, 'Influence of Geometric Shape of Recess on the Performance of a Six – Pocket Hybrid Journal Bearing System', Proceedings of International Conference on Industrial Tribology, ICIT – 04, Mumbai, Dec. 15 – 18, 2004, pp. 328 – 336.

112. Vinod Patil, S.C. Jain, Satish C. Sharma, and Rakesh Kumar Gautam, 'Simulated Study of Sliding Wear', Proceedings of International Conference on Industrial Tribology, ICIT – 04, Mumbai, Dec. 15 – 18, 2004, pp. 442 – 447.

113. Satish C. Sharma, Narendra Singh, S.C. Jain and S. Sanjeeva Reddy, ‘Performance of Multirecess Hydrostatic/Hybrid Journal Bearing of Various Recess Shapes Using Membrane Flow Valve Restrictor', Proceeding of Int. Conference of Fluid Mechanics, I.I.T. Roorkee, December 12-14, 2004, Vol. II, pp 711-723.

114. Satish C. Sharma, T. Nagaraju and S.C. Jain, 'Performance of Orifice Compensated Hole – Entry Hybrid Journal Bearing System, Considering Surface Roughness and Thermal Effects', Proceedings of 2003 STLE / ASME, Joint International Tribology Conference, Ponte Vedra Beach, Florida U.S.A., Oct. 26-29, 2003, Paper No. Trib. – 11, pp. 1-21.

115. T. Nagaraju, Satish C. Sharma, and S.C. Jain, 'Dynamic Performance Characteristics of Misaligned Hybrid Journal Bearing System Including Surface Roughness Effects', Proceedings of Int. Conference of Fluid Mechanics, I.I.T. Roorkee, December 12-14, 2002, Vol. II, pp. 705-710.

116. Satish C. Sharma, T. Nagaraju and S.C. Jain, ‘Combined Influences of Journal Misalignment and Surface Roughness on the Performance of Orifice Compensated Non-Recessed Hybrid Journal Bearing’, proceedings of 57th Annual Meeting of STLE, Houston TX, May 19-2002, Technical Preprints, 02-NP-24, pp 609-620

117. Vijay Kumar, Satish C. Sharma and S.C. Jain, ‘Performance of Orifice Compensated Hole-Entry Hybrid Journal Bearing Including Thermal Effects’, Proceedings of ICIT,2001, pp. 4-119 to 4-126, Jamshedpur (INDIA) 8th - 11th April 2002.

118. Nagaraju T, Satish C. Sharma and Jain S. C., ‘Performance of Constant Flow Valve Compensated Hole-Entry Hybrid Journal Bearing Including Surface Roughness Effects’, Proceedings of ICIT,2001, pp. 4-41 to 4-49, Jamshedpur (INDIA) April 8-11, 2002.

119. Narendra Singh, Satish C. Sharma and S. C. Jain, ‘The Influence of Geometric Shapes of Recess on the Performance of Orifice Compensated Multirecess Hybrid Journal Bearing’, Proceedings of ICIT,2001, pp. 4-31 to 4-40, Jamshedpur (INDIA), April 8-11, 2002.

120. Satish C. Sharma, S. C. Jain and Rajneesh Kumar, ‘Effect of Size of a Hole on the Performance of a Capillary Compensated Hole-Entry Hybrid Journal Bearing’, Proceedings of ICIT,2001, pp. 4-22 to 4-30, Jamshedpur (INDIA), April 8-11, 2002.

121. T. Nagaraju, Satish C. Sharma and S. C. Jain, ‘Static Performance of Misaligned Hole-Entry Hybrid Journal Bearing Including Surface Roughness Effects ‘, Proceedings of 4th International conference on Mechanical Engineering, December 26-28, 2001, Dhaka, Bangladesh, Section V, pp. 147-153. 2001.

122. Satish C. Sharma, S.C. Jain and N. Madhu Mohan Reddy, ‘A Study of Non – Recessed Hybrid Flexible Journal Bearing with Different Restrictors’, ASME/STLE Tribology Conference, Seattle, WA, October 1 – 4, 2000 and Proceedings of a ASME/2000-Trib.8 (TC2000/STLE-10).

123. Satish C. Sharma, S.C. Jain and B.V.N. Surendra Kumar, ‘Effect of Load Direction on the Hydrostatic/Hybrid Performance of a Multirecess Orifice Compensated Flexible Journal Bearing’, Proceedings of International Conference of Industrial Tribology-1999, Hyderabad, Dec. 1-4, pp.101-108, 1999.

124. Vijay Kumar, Satish C. Sharma, S.C. Jain, ‘Transient Response of Capillary Compensated Hybrid Journal Bearing System During Starting and Stoping Operation’, Proceedings of International Conference of Industrial Tribology – 1999, Hyderabad, Dec. 1-4, 1999, pp.75-82, 1999.

125. Satish C. Sharma, R. Sinhasan, S. C. Jain, N. Singh and S.K. Singh, ‘Performance of Hydrostatic/Hybrid Journal Bearing with Unconventional Recess Geometries’, Proc. of 52nd Annual Meeting of STLE, KANSAS CITY MISSOURI (U.S.A.), May 18-22, 1997.

126. R. Sinhasan, S.C. Jain, P.L. Sah and Satish C. Sharma, ‘Dynamic Performance Characteristics of Hydrostatic/Hybrid Journal Bearing with Non-Newtonian Lubricants’, Proceedings of International Conference on Industrial Tribology, (ICIT-97), Calcutta (INDIA), Dec. 2-5, pp. 167-171, 1997.

127. S.C. Jain, Satish C. Sharma and A. Jagtap, ‘Performance of Multirecess Hybrid Journal Bearing Operating in Turbulent Regime’, Proceedings of International Conference on Industrial Tribology (ICIT-97), Calcutta (INDIA), Dec. 2-5, pp. 172-177, 1997.

128. Nagvendra kumar kanoje, Sharma, Satish C., and S. P. Harsha, Mass Reduction of Railway Wheel Using Response Surface Method Considering Natural Frequency and Wheel Dimension, Proceeding of 4^th International Conference on Structural Stability.

Publications

1. Vivek Kumar and Satish C. Sharma, “Performance of Circular Recessed Hydrostatic Tilted Thrust Pad Bearing Operating with Couple Stress Lubricant”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-557, Dec. 08-10, 2016.

2. Chandra B. Khatri and Satish C. Sharma, “A study of a textured slot-entry hybrid journal bearing system operating with power law lubricant”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-514, Dec. 08-10, 2016.

3. Satish C. Sharma and Chandra B. Khatri, “Performance analysis of a 3-lobe textured slot-entry hybrid journal bearing system”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-562, Dec. 08-10, 2016.

4. Dharmendra Jain and Satish C. Sharma, “Static and Dynamic Characteristics of a Geometrically Imperfect CFV Compensated Two-Lobe Hybrid Journal Bearing Lubricated with Power Law Lubricant”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-556, Dec. 08-10, 2016.

5. Suresh Jadhav and Satish C. Sharma, “Film thickness in Elasto-hydrodynamic lubricated point contacts”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-558, Dec. 08-10, 2016

6. Saurabh K. Yadav, Nathi Ram and Satish C. Sharma, “Performance of hybrid tilted and textured thrust pad bearing”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-590, Dec. 08-10, 2016

7. Nathi Ram, Saurabh K. Yadav and Satish C. Sharma, “Performance of asymmetric hole-entry hybrid journal bearing using CFV restrictor under micropolar lubrication”, National Tribology conference (NTC-2016), IIT BHU, Varanasi (India), Paper No. NTC-2016-502, Dec. 08-10, 2016

8. Satish C. Sharma, “Hydrostatic/Hybrid Bearings - Some Recent Advances”, Proceedings Tribology Frontiers Workshop 03-04^th Aug, Indian Institute of Engineering Science and technology Shibpur, Howrah, 2016.

9. Prashant B.Kushare and Satish C. Sharma, “A study of multilobe slot entry hybrid journal bearing”, National Tribology conference (NTC-2014), PES University, Bengaluru (India), Paper No. NTC-2014-516, Dec. 15-18, 2014.

10. Chandra B. Khatri and Satish C. Sharma, “Performance analysis of a capillary compensated partial non-recess hole entry hybrid journal bearing system”, National Tribology conference (NTC-2014), PES University, Bengaluru (India), Paper No. NTC-2014-505, Dec. 15-18, 2014.

11. Dharmendra Jain and Satish C. Sharma, “Performance analysis of power law lubricated geometrically imperfect four lobe multi-recessed hybrid journal bearings”, National Tribology conference (NTC-2014), PES University, Bengaluru (India), Paper No. NTC-2014-506, Dec. 15-18, 2014.

12. Saurabh K. Yadav and Satish C. Sharma, “Study of circular hydrostatic tilted thrust pad bearing by considering temperature variation of oil film”, National Tribology conference (NTC-2014), PES University, Bengaluru (India), Paper No. NTC-2014-515, Dec. 15-18, 2014.

13. Nathi Ram, Saurabh K. Yadav and Satish C. Sharma, “Static performance of Hole-Entry Hybrid Journal Bearing operating under turbulence Regime”, National Tribology conference (NTC-2014), PES University, Bengaluru (India), Paper No. NTC-2014-507, Dec. 15-18, 2014.

14. Nathi Ram, Satish C. Sharma, “Comparative Study of the Performance of Constant Flow Valve and Capillary Compensated Non-Recessed Hole-Entry Hybrid Journal Bearing operating with Micropolar Lubricants”, Proceedings of 1^stNational Tribology Conference (NTC 2011), IIT Roorkee, Roorkee (India), December 08-10, Paper No. NTC-201124, 2011.

15. Satish C. Sharma, Somesh Sharma, Sumit Wadhwa and Suren Kumar, ‘Design an Electrically Assisted Multi-Terrain Human Powered Vehicle’, Proc. Of 3^rd UttaraKhand state Science and Technology Congress’. IIT Roorkee, Nov. 10-11, 2008, pp167.

16. K.M. Jagdeesha, T. Nagaraju, V.K. Jadon, Satish C. Sharma and S.C. Jain, ' Stability of Hole – Entry Hybrid Journal Bearing Lubricated with Non – Newtonian Lubricant from Linear and Non – Linear Transient Analysis', Proceedings of First International and 22^nd AIMTDR Conference, Dec. 21 – 23, 2006, pp. 199-204, Deptt. of Mech. & Ind. Engg., I.I.T. Roorkee, Roorkee 247 667.

17. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, 'A Parametric Study on the Performance of Hole – Entry Hybrid Worn Journal Bearing System', Proceedings of National Conference on Advances in Mechanical Engineering (AIME – 2006), Faculty of Engg. & Technology, Jamia Millia Islamia, New Delhi, Jan. 20-21, 2006, pp. 9-20.

18. R.K. Awasthi, Satish C. Sharma, and S.C. Jain, 'Effect of Grid Size on Hydrodynamic Journal Bearing Performance', Proceedings of the Conference on Computer Aided Design and Manufacturing: A Global Perspective MED, TIET, Patiala, April 8-9, 2005.

19. Narendra Singh, Satish C. Sharma, and S.C. Jain, 'Performance of Constant Flow Valve Compensated Multirecess Hydrostatic / Hybrid Journal Bearing of Different Recess Geometries', Proceedings of National Conference on Recent Development in Mechanical Engineering, Mech. Engg. Deptt., TIET, Patiala, Oct. 31^st - 1^st Nov., 2003, pp. 264 – 270.

20. Vijay Kumar, Satish C. Sharma, S.C. Jain and Y.J. Rajput, ‘Thermohydrostatic Analysis of Capillary Compensated Hole – Entry Hybrid Journal Bearing’, Proceedings of Sixteenth National convention of Mechanical Engineers, Department of Mechanical and Industrial Engineering, University of Roorkee, Roorkee, pp. 109-116, September 29 – 30, 2000.

21. T.Nagaraju, Satish C. Sharma, S.C. Jain, ‘Performance of Constant Flow Valve Compensated Hole-Entry Hybrid Journal Bearing Considering Journal Misalignment’, Sixteenth National convention of Mechanical Engineers, Department of Mechanical and Industrial Engineering, University of Roorkee, Roorkee, pp. 133-139, September 29 – 30, 2000.

22. S.C.Jain, R. Sinhasan, Satish C. Sharma and V.H. Saran, ‘Comparative Assessment of 3-Pocket and 4-Pocket Journal Bearing Systems’, Proceedings of 9^th ISME Conference on Mechanical Engineering, Deptt. of Mech. and Ind. Engg., University of Roorkee, Roorkee – 247 667, Nov. 10-11, 1994, pp. 579-583.

23. R. Sinhasan, S.C. Jain and Satish C. Sharma, ‘Elastic Considerations in Performance Characteristics of Hydrostatic Bearings’, 12th AIMTDR Conference, IIT Delhi on Dec. 12, 1986, pp. 1030(1)-1030(4).

Honors And Awards

Honors

RDSO, Lucknow

2016

Jury member for public competition for waterless and odourless Toilets in Trains under “Swachh Bhara

Institution of Engineers, India.

2003

Certificate of Merit

University of Roorkee

2002

First Khosla Annual Research Award

University of Roorkee

2002

Second Khosla Research Award

Institution of Engineers, India

2001

Corps of Electrical and Mechanical Engineering Medal

University of Roorkee

1999

Khosla Research Recommendation Award

University of Roorkee

1993

Second Khosla Research Prize and Medal

University of Roorkee

1992

Khosla Annual Research Award

University of Roorkee

1982

University Gold Medal for Standing First in First class in M.E. (Machine Design)

MemberShips

Government of India, Dept. of Space, Indian Space Research Organization

01 Sep 2020 - Present

Member of the Expert Committee

Tehri Hydro Development Corporation Ltd., 2012-15, 2015-2018.

31 Aug 2020 - Present

Member-Apex Advisory committee (R&D)

IFToMM (International Federation for the Promotion of Mechanisms and Machines, 2013 to till date.

31 Aug 2020 - Present

Tribology Committee Member

Tribology Society of India, Jan 2017-Dec 2018.

31 Aug 2020 - Present

Executive Member

Indira Gandhi Delhi Technical University for women, Dec 2016-Dec 2018

31 Aug 2020 - Present

Member Board of Studies

Central Pollution Control Board New Delhi, (Jan. 2014- Dec. 2015)

31 Aug 2020 - Present

Member-National Committee on Noise Pollution control

Tribology Society of India (TSI), 2014-2016

31 Aug 2020 - Present

Joint Secretary

Tribology Society of India (TSI) 2009-2010, 2011-2012 & 2013-14

31 Aug 2020 - Present

Executive Member

Board of Post Graduate Education and Research in Engineering and Technology AICTE, New Delhi, 2009-2

31 Aug 2020 - Present

Member

Central Board of Railway Research (CBRR), RDSO, Lucknow2011-12

31 Aug 2020 - Present

Member

Academic Council, Mahamaya Technical University, Noida, G.B. Nagar(U.P)

31 Aug 2020 - Present

Member

Board of Studies Guru Jambeshawar University (Hissar).

31 Aug 2020 - Present

Member

Board of Studies Thaper University, Patiala, Punjab

31 Aug 2020 - Present

Member

Indian Society of Mechanical Engineers (ISME)

31 Aug 2020 - Present

Life Member

Tribology Society of India (TSI)

31 Aug 2020 - Present

Life Member

Instrument Society of India (ISOI)

31 Aug 2020 - Present

Life Member

Institution of Engineers (INDIA)

23 Sep 2020 - Present

Member

Students

SuperVisions

Elastohydrostatic Lubrication of Journal Bearing operating with Non- Newtonian Lubricants

01 Jan 1996 - 01 Jan 1999

Other Supervisors: Dr. S.C. Jain, Scholar: Prakash Lal Sah

Thermoelastohydrostatic analysis of Non-Recessed Hybrid Journal Bearings

01 Jan 1996 - 01 Jan 2000

Other Supervisors: Dr. S.C. Jain, Scholar: Vijay Kumar

Performance of Non-Recessed Hybrid Journal Bearings with Surface Roughness Effects

01 Jan 2000 - 28 Feb 2003

Other Supervisors: Dr. S.C. Jain, Scholar: T. Nagaraju

Performance of Multirecess Compensated Flexible Journal Bearing with Recess Shapes

01 Jan 2000 - 01 Jan 2004

Other Supervisors: Dr. S.C. Jain, Scholar: Narendra Singh

The Influence of Wear and Running – in on Fluid Film Journal Bearing System

01 Jan 2002 - 01 Jan 2006

Other Supervisors: Dr. S.C. Jain, Scholar: Rajeev Kumar Awasthi

Development of Cu-Cr Alloy Based Composite and their Physical and Tribological Properties

01 Jan 2005 - 01 Jan 2009

Other Supervisors: Dr. S.C. Jain, Dr. S. Ray, Scholar: Rakesh Kumar Gautam

Performance of E.R. Fluid Lubricated Hybrid Journal Bearing System

01 Jan 2006 - 01 Jan 2010

Other Supervisors: Dr. S.C. Jain, Scholar: J.S. Basavaraja

Fault Diagnosis and Prognosis of High Speed Rotor Bearing Systems

01 Jan 2008 - 01 Jan 2011

Other Supervisors: Dr. S. P. Harsha, Scholar: Pawan K. Kankar

Parametric study of Vibration based Electromechanical Coriolis Mass Flow Sensor

01 Jan 2008 - 01 Jan 2011

Other Supervisors: Dr. S.C. Jain, Scholar: Pravin P.Patil

Dynamic Analysis of Single Walled Carbon Nanotube Based Mass Sensor

01 Jan 2008 - 01 Jan 2012

Other Supervisors: Dr. S. P. Harsha, Scholar: Anand Y. Joshi

Influence of Wear on the Performance of Multirecess Fluid Film Journal Bearings

01 Jan 2008 - 01 Jan 2012

Other Supervisors: Dr. S.C. Jain, Scholar: Vikas M. Phalle

Optimum Design Considerations for Steel Cleanliness in Tundish Steelmaking

01 Jan 2008 - 01 Jan 2012

Other Supervisors: Dr. P. K. Jha Mr.S. K. Ajmani (TISCO), Scholar: Sabin Mishra

Modeling and Evaluation of Mechanical Properties of Carbon Nanotube Reinforced Composites

01 Feb 2008 - 01 Feb 2012

Other Supervisors: Dr. S. P. Harsha, Scholar: Unnati Pandya

A Study of Non-Recessed Journal Bearings with Micropolar and Couple stress Lubricants

01 Jan 2009 - 01 Jan 2013

Other Supervisors: , Scholar: Nathi Ram

Study Of Geometrically Imperfect Multirecess Fluid Film Hybrid Journal Bearings

01 Jan 2011 - 01 Jan 2014

Other Supervisors: , Scholar: Arvind Kumar Rajput

Dynamic analysis of Rail wheel Structure due to defects

01 Jan 2011 - 01 Jan 2015

Other Supervisors: Dr. S. P. Harsha, Scholar: Nagvendra Kumar

Design for Assembly-Stack up of Geometrical Tolerances for Cost Optimization

01 Jan 2011 - 01 Jan 2015

Other Supervisors: DR. P. K. Jain, Scholar: Ajay Kumar Sahani

Performance Of Multilobe Non-Recessed Hydrostatic/Hybrid Journal Bearings

01 Jan 2011 - 01 Jan 2015

Other Supervisors: , Scholar: Prashant B. Kushare

Analysis of Boron Nitride Nanotube Reinforced Composites

01 Jan 2011 - 01 Jan 2015

Other Supervisors: Dr. S. P. Harsha, Scholar: Sandesh Trivedi

Design and Development of Upgraded Draft Gear for Freight Stock vehicle

01 Jan 2012 - 01 Jan 2016

Other Supervisors: Dr. S. P. Harsha, Scholar: Harak Sachin Sudhakar

A Study on The Lubrication of Hydrostatic Thrust Pad Bearings

01 Jan 2012 - 01 Jan 2016

Other Supervisors: , Scholar: Saurabh Kumar Yadav

Study and Analysis of Failure of Line Contact Bearing Under Micro EHL Condition

01 Jan 2012 - 01 Jan 2016

Other Supervisors: Dr. S. P. Harsha Dr. M. R. Tyagi (I.I.P. Dehradun), Scholar: G. D. Thakre

Study of Geometric Imperfection in Non-circular Journal Bearing

01 Jan 2013 - 01 Jan 2017

Other Supervisors: , Scholar: Dharmendra jain

A Study of Non-Recessed Hybrid Journal Bearings with Textured Surfaces

01 Jan 2014 - 01 Jan 2018

Other Supervisors: , Scholar: Chandra Bhadur Khatri

Effect of non-linear behavior of lubricants on hydrostatic/hybrid bearings performance

01 Jan 2015 - 01 May 2019

Other Supervisors: , Scholar: Vivek Kumar

A Study of Elastohydrodynamic Lubricated Soft Contacts

01 Jan 2016 - 21 Aug 2019

Other Supervisors: Dr. G. D. Thakre (I.I.P. Dehradun), Scholar: Suresh Jadhav

Multi-lobe Hybrid Journal Bearings

01 Jan 2016 - 22 Nov 2021

Other Supervisors: , Scholar: Krishnkant Sahu

A Study on the Performance of conical Hybrid Journal Bearing

17 Jul 2017 - Present

Other Supervisors: , Scholar: Abhishek Kumar

Fault diagenesis of large steam turbine blade using machine learning method

06 Jul 2018 - Present

Other Supervisors: Prof. S. P. Harsha, Scholar: Rajesh Kumar Bhamu

A Study on the Performance of spherical Hybrid Journal Bearing

06 Jul 2018 - Present

Other Supervisors: , Scholar: Adesh Tomar

A study of plain/conical porous journal bearing

27 Dec 2018 - Present

Other Supervisors: , Scholar: Anil Singh

A study of hydrostatic/hybrid spherical thrust bearing

12 Jul 2019 - Present

Other Supervisors: , Scholar: Nitin Agrawal

A Study on Behavior of Hydrostatic/Hybrid Circular Thrust Pad Bearing Configurations.

26 Dec 2019 - Present

Other Supervisors: , Scholar: Narendra Kumar

A Study on the Static and Dynamic Analysis on Secondary Suspension System (Air-Spring) and Draft Gear of railway vehicle

14 Jan 2020 - Present

Other Supervisors: Prof. S. P. Harsha, Scholar: Vikas Tiwari

Miscellaneous

Events

TRIBOLOGY IN ENGINEERING: ISSUES/APPLICATIONS/OPPORTUNITIES

03 Mar 2022 - Present

Tribological Performances of Textured Surfaces

02 Dec 2021 - Present

Surface Texturing in Fluid Film Bearing Applications

31 Aug 2021 - Present

Application of Textured Surfaces in Fluid Film Bearing Technology

31 Aug 2021 - Present

Recent Trends in Tribological Design of Fluid Film Bearings

12 Apr 2021 - 17 Apr 2021

Application of Textured Surfaces in Fluid Film Bearing Technology

16 Mar 2021 - Present

Role of Biomimetics in Tribological Design of Machine Elements

15 Mar 2021 - Present

Preparation of SSR (Self Study Report)

14 Mar 2021 - Present

Fluid Film Lubrication

12 Dec 2020 - Present

Lubrication Performance of Hydrostatic / Hybrid Textured Fluid Film Bearings

11 Dec 2020 - Present

Surface Texturing in Tribological Applications

27 Nov 2020 - Present

SURFACE TOPOGRAPHY - Influence on Tribo - Performance

25 Nov 2020 - Present

Hydrostatic Bearings - An Overview

24 Nov 2020 - Present

TRIBOLOGY AND ITS INFLUENCE ON SOCIETY

23 Nov 2020 - Present

Member peer team

31 Aug 2020 - Present

Expert in selection committee

04 Jun 2016 - Present

1. Expert in selection committee of BITs, Pilani, Goa Campus

05 Jul 2016 - Present

Expert in selection committee

06 Jan 2015 - Present

Expert in selection committee

06 Aug 2014 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert in selection committee

31 Aug 2020 - Present

Expert Member

31 Aug 2020 - Present

A 5 Day Online International Course on “Fundamentals of Bogie Design”

12 Oct 2020 - 16 Oct 2020

RDSO, LUCKNOW

A 3 Day International Course On RAILWAY VEHICLE DYNAMICS

27 May 2019 - 29 May 2019

RDSO, LUCKNOW

Modelling and Simulation of Dynamical Systems

30 Dec 2013 - 03 Jan 2014

Continuing Education Center, Indian Institute of Technology Roorkee.

Noise Monitoring and Control Technologies

21 Dec 2012 - 23 Dec 2012

CPCB New Delhi

Vibration Condition Monitoring Techniques For Fault Diagnosis

07 Mar 2011 - 10 Mar 2011

L&T, NBC, NTPC, BHEL, FAG, TIMKEN, THDC etc.

Dynamics and Control of Mechanical Systems

01 Jan 2011 - Present

AICTE sponsored, QIP,IIT Roorkee

Strength of Materials

24 Sep 2010 - 26 Sep 2010

RDSO Lucknow

Diagnostics and Condition Monitoring of Rotating Machines

03 Apr 2010 - 06 Apr 2010

RDSO, NTPC, THDC, CEC, IIT Roorkee, Roorkee.

Sound and Vibrations, Fundamental, Measurement, Diagnostics & Analysis

06 Jul 2009 - 10 Jul 2009

Continuing Education Center, Indian Institute of Technology Roorkee.

Bearing Technology & Maintenance

03 Dec 2008 - 06 Dec 2008

Continuing Education Center, Indian Institute of Technology Roorkee.

Pipe Line Technology

10 Sep 2001 - 14 Sep 2001

ONGC

Pipe Line Technology

16 Aug 1999 - 19 Aug 1999

ONGC

73rd STLE Annual Meeting

20 May 2018 - 24 May 2018

71th STLE Annual Meeting

15 May 2016 - 19 May 2016

STLE

Northwestern University (USA) and University of Akron (USA), Under the project sponsored by Indo-US Science and Technology Forum, May 14-25, 2015.

14 May 2015 - 25 May 2015

70th STLE Annual Meeting

17 May 2015 - 21 May 2015

STLE

Northwestern University (USA) and University of Akron (USA), Under the project sponsored by Indo-US Science and Technology Forum

08 Jun 2014 - 21 Jun 2014

Global Conference

06 Dec 2013 - 08 Dec 2013

Pan-IIT Alumni

68th STLE Annual Meeting

05 May 2013 - 09 May 2013

STLE

67th STLE Annual Meeting

06 May 2012 - 10 May 2012

STLE

66th STLE Annual Meeting

15 May 2011 - 19 May 2011

STLE

63rd STLE Annual Meeting

18 May 2008 - 22 May 2008

STLE

ASME / STLE Joint International Tribology Conference

26 Oct 2003 - 29 Oct 2003

ASME / STLE

ASME / STLE Joint International Tribology Conference

26 Oct 2000 - 29 Oct 2000

ASME / STLE

52nd STLE Annual Meeting

18 May 1997 - 22 May 1997

STLE

Leverhulme Visiting Fellow at University of Surrey Guildford (UK)

04 Oct 1994 - 06 Jul 1995

National Tribology Conference (NTC-2011)

01 Jan 2011 - Present

Department of Mech. & Ind. Engg. IIT Roorkee

Design for Reliability

16 Oct 2020 - 16 Oct 2020

RDSO, LUCKNOW

LUBRICANTS -2 Smart

19 Sep 2020 - Present

LUBRICANTS -1 Fundamentals

18 Sep 2020 - Present

Tribology and its Influence on Society

15 Sep 2020 - Present

Role of Tribology in Industry

11 Sep 2020 - Present

Concept of Fluid Film Lubrication

19 Aug 2020 - Present

Introduction to Tribology – Its Impact On Society

18 Aug 2020 - Present

Basics of Fluid Film Lubrication

21 Jul 2020 - Present

Basics of Lubrication/ Hydrostatic bearings

09 Dec 2019 - Present

Textured surfaces Hydrostatic/Hybrid fluid film bearings

01 Dec 2019 - Present

Tribology in Railway Wheel Contact

27 May 2019 - 29 May 2019

Fluid Film Lubrication

18 Jan 2019 - Present

Application of MR fluid damper in Railway suspension system

27 May 2019 - Present

Basics of Fluid Film Lubrication

14 May 2019 - Present

Failure Mechanism of Fluid Film Bearings

03 Jul 2018 - Present

Textured Fluid Film Bearings

11 Jun 2018 - Present

Basics of Fluid Film Lubrication

18 Jun 2018 - Present

Basics of Fluid Film Lubrication

06 Sep 2017 - Present

Basics of Fluid Film Lubrication

19 Jun 2017 - Present

Basics of Fluid Film Lubrication

25 Jul 2016 - Present

Hydrostatic/Hybrid Bearings - Some Recent Advances

03 Aug 2016 - Present

Stability analysis of fluid film journal bearing system

05 May 2016 - Present

Tribology and its Impact

09 Apr 2016 - Present

Tribology and its Impact

05 Mar 2016 - Present

Tribology and its Impact

22 Jan 2016 - Present

Basics of Fluid Film Lubrication:- Hydrostatic Bearings

10 Dec 2015 - Present

Basics of Fluid Film Lubrication

09 Jun 2015 - Present

Tribology and Its Impact

20 Dec 2014 - Present

Tribology and Its Impact- Consideration for Lubrication Science & their Applications

01 Jan 2014 - Present

Tribology and Its Impact- Consideration for Lubrication Science & their Applications

16 Dec 2014 - Present

Principals of Hydrostatic Lubrication

24 Jun 2014 - Present

Fluid Film Lubrication

24 Jun 2013 - Present

Fluid Film Lubrication

06 Dec 2012 - Present

Fluid Film Lubrication

25 Jun 2012 - Present

FEM Applications in Fluid Film Journal Bearings

24 Jun 2012 - Present

Coriolis Mass Flow Sensors- A State of art

24 Feb 2011 - Present

FEM applications in Engineering

27 May 2011 - Present

Fluid Film Bearings

22 Jun 2011 - Present

Fluid Film Lubrication

01 Jan 2011 - Present

Fluid Film Lubrication

21 Jun 2010 - Present

Design and Development of Hydrostatic Bearing

11 May 2010 - Present

Visits

Minneapolis, (USA)

2018-05-20

73rd STLE Annual Meeting,

Las, Vegas (USA)

2016-05-15

71th STLE Annual Meeting,

Dallas, Texas (USA)

2015-05-17

70th STLE Annual Meeting

Northwestern University (USA) and University of Akron (USA)

2015-01-01

Under the project sponsored by Indo-US Science and Technology Forum

Northwestern University (USA) and University of Akron (USA)

2014-01-01

Under the project sponsored by Indo-US Science and Technology Forum

Houston, Texas,

2013-12-06

Pan-IIT Alumni 2013 Global Conference

Detroit, Michigan (USA)

2013-05-05

68th STLE Annual Meeting

St. Louis, Missouri (USA)

2012-05-06

67th STLE Annual Meeting

Atlanta, Georgia (USA)

2011-05-15

66th STLE Annual Meeting

Cleaveland, Ohio (USA)

2008-05-18

63rd STLE Annual Meeting

Florida (USA)

2003-10-26

ASME / STLE Joint International Tribology Conference

Seattle (USA)

2000-10-26

ASME / STLE Joint International Tribology Conference

Missouri (USA)

1997-05-18

52nd STLE Annual Meeting, Kansas

Administrative Positions

Member, Finance Committee

01 Jan 2018 - 31 Dec 2019

IIT Roorkee

Member, Board of Governors

01 Jan 2018 - 31 Dec 2019

IIT Roorkee

Chief Vigilance Officer

23 Oct 2015 - 22 Oct 2018

IIT Roorkee

Coordinator, Centre for Railway Engineering/ Centre for Railway Research

01 May 2014 - Present

IIT Roorkee

Dean of Alumni Affairs

01 Jan 2013 - 08 May 2014

IIT Roorkee

Associate Dean of Faculty Affairs

01 Jan 2007 - 31 Dec 2009

IIT Roorkee

Head of the Department, Mechanical & Industrial Engg.

01 Jan 2010 - 31 Dec 2012

IIT Roorkee

Member, Deptt. Professorial Committee, Institute Instrumentation Centre,

11 Feb 2011 - 10 Feb 2012

IIT Roorkee

Member , Institute Building Works Committee

01 Jan 2011 - 31 Dec 2012

IIT Roorkee

Vice President-Adarsh Bal Niketan Sr. Sec. School

01 Jan 2009 - 01 Jan 2012

IIT Roorkee

Chairman Department Academic Studies Committee (DASC)

01 Jan 2008 - 01 Jan 2010

IIT Roorkee

Member, Deptt. Professorial Committee, Deptt. of Architecture & Planning

22 Sep 2006 - 21 Sep 2008

IIT Roorkee

Chairman Department Research Committee (DRC)

01 Jan 2006 - 01 Jan 2008

IIT Roorkee

Member, Deptt. Professorial Committee, MIED

01 Oct 2003 - 01 Oct 2006

IIT Roorkee

Warden Student Hostel (Ravindra Bhawan)

01 Jan 1992 - 01 Jan 1993

University of Roorkee

Staff Advisor - Basketball/Volleyball

01 Jan 1989 - 01 Jan 1994

University of Roorkee

RESEARCH PUBLICATIONS

i.	International Refereed Journals		182
ii.	Book/series/ Chapter		03
iii.	Abstracts		01
iv.	National Journals		07
v.	Proceedings of International and National Conferences		151
h- Index: 33		i-10 Index: 101	No. of Citations: 4002