- V.Gaur, V.Doquet, J.Kittel, E.Persent, E.Roguet, “Corrosion fatigue behavior of Cr-Mo steel under biaxial tension”, Fatigue & Fracture of Engineering Materials & Structures. Fatigue Fract Eng Mater Struct. 2020; 1– 11. SCI, I.F. 2.6
- V.K. Yadav, V.Gaur, IV Singh, “Effect of post-weld heat treatment on mechanical properties and fatigue crack growth rate in welded AA-2024” Materials Science and Engineering A 779 (2020) 139116. SCI, I.F. 4.08
- V.Gaur, F.Briffod, M. Enoki, “Micro-mechanical investigation of fatigue behavior of Al-alloys containing surface/superficial defects.” Materials Science and Engineering A 775 (2020) 138925. SCI, I.F. 4.08
- V.Gaur, M. Enoki, T. Okada, S. Yomogida, “Physically short and long-crack growth behavior of MIG welded Al-5.8%Mg alloy”, Engineering Fracture Mechanics 209 (2019) 301-316. SCI, I.F. 3.0
- V.Gaur, M. Enoki, T. Okada, S. Yomogida, “A study on fatigue behavior of MIG-welded Al-Mg alloy with different filler-wire materials under mean stress”, International Journal of fatigue 107 (2018) 119-129. SCI, I.F. 3.7
- V.Gaur, V.Doquet, E.Persent, E.Roguet, “Effect of biaxial cyclic tension on the fatigue life and damage mechanisms of Cr-Mo steel”, International journal of fatigue 87 (2016) 124-131. SCI, I.F. 3.7
- V.Gaur, V.Doquet, E.Persent, C.Mareau, E.Roguet, J.Kittel, “Surface versus internal fatigue crack initiation in steel: Influence of mean stress”, International journal of fatigue 82 (2016) 437-448. SCI, I.F. 3.7
Proceedings in International Conference
- V. Gaur, F. Briffod, M. Enoki, “Prediction of fatigue lives of aluminum alloys using crystal plasticity framework”, In proc. of 9th International Advances in Applied Physics & Materials Science Congress & Exhibition, Oludeniz (Turkey), 2019
- V. Gaur, M. Enoki, T. Okada, S. Yomogida, “A Crack growth study of MIG-welded Al-Mg alloy”, In proc. of 18th International Conference on New Trends in Fatigue and Fracture, Lisbon (Portugal), 2018
- V. Gaur, M. Enoki, T. Okada, S. Yomogida, “Fatigue life and crack growth behavior of post welded Aluminum 5183 alloy”, In proc. of 12th International fatigue congress (Fatigue 2018), Poitiers Futuroscope (France)
- V. Gaur, M. Enoki, T. Okada, S. Yomogida, “Influence of Weld Parameters and Filler-Wire on Fatigue Behavior of MIG-Welded Al-5083 Alloy” In: Ambriz R., Jaramillo D., Plascencia G., Nait Abdelaziz M. (eds) Proc. of the 17th International Conference on New Trends in Fatigue and Fracture, Cancun (Mexico) pp. 209-214, Springer ISBN 978-3-319-70365-7
- V. Gaur, M. Enoki, “A new model for mean-stress effect on fatigue performance” In proc. of 161st JIM (Japan Institute of Metals) Meeting at Hokkaido University (Japan), September 2017.
- V.Gaur, V.Doquet, E.Roguet, E.Persent, “Fatigue behaviour of Cr‐Mo steel in air and in salt water under biaxial tension”, In proc. of International Conference on Fatigue Damage of Structural Materials XI, Hyannis (US), 2016.
- V.Gaur, V.Doquet, E.Roguet, E.Persent, “A fatigue criterion to describe the combined effects of biaxial tension and mean stress”, In proc. of 11th International Conference on Multiaxial Fatigue & Fracture, Seville (Spain), 2016.
- V.Gaur, V.Doquet, E.Persent, E.Roguet, “Fatigue of clip connectors for offshore drilling risers under combined influence of high mean stress and biaxial tension”, Procedia engineering 133 (2015) 90-101, Fatigue design, Senlis (France), 2015.
- V.Gaur, V.Doquet, E.Roguet, E.Persent, “Biaxial fatigue of clip connectors for offshore drilling risers under high mean stress”, In proc. of 4th International Conference on Fracture, Fatigue and Wear, Ghent (Belgium), pp. 7-12, 2015.
- V.Gaur, A. Ngassa, V.Doquet, E.Roguet, E.Persent, Fatigue of clip connectors for offshore oil drilling risers under biaxial tension”, Poster In proc. 14th International conference on Fatigue design & Material defects, Paris (France), 2014.