1.         Rajesh Govindan, V.H. Saran and S.P. Harsha, “Biodynamic response analysis of semi-supine human under varying vertical excitations”, Int. Jnl. of Ind. Ergonomics, Vol. 85, 2021.

2.         Rajesh Govindan, V.H. Saran and S.P. Harsha, “Subjective discomfort analysis of human body in semi-supine posture caused by vertical sinusoidal vibration”, Ergonomics, pp.744-754, Vol. 64, No. 6, 2021

3.         V. Kumar, S.J. Singh, V.H. Saran and S.P. Harsha, “An analytical framework for rectangular FGM tapered plate resting on the elastic foundation”, Proceedings of Materials Today, pp. 1719- 1726, 2020.

4.         Rajesh Govindan, V.H. Saran and S.P. Harsha, “Low-Frequency Vibration Analysis of Human    Body in Semi-Supine Posture Exposed to Vertical Excitation”, European Journal of Mechanics / A Solids, pp. 1-13, Vol. 80, 2020.

5.         Vivek Parmar, V.H. Saran and S.P. Harsha, “Effect of Unbalanced Rotor on Dynamic Characteristics of Double-Row Self-Aligning Ball Bearing” European Journal of Mechanics/ Part A – Solids, pp. 1-18, Vol.82, 2020.

6.         Vivek Parmar, V.H. Saran and S.P. Harsha, “Nonlinear vibration response analysis of a double-row self-aligning ball bearing due to surface imperfections”, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, pp. 01-22, Vol. 234, No.3, 2020.

7.         Pravajyoti Patra, V. H. Saran and S.P. Harsha, “Vibration Response Analysis of High-Speed Roller Bearings Using Response Surface Method”, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, pp. 379-392, Vol. 234, No. 2, 2020.

8.         Pravajyoti Patra, V. H. Saran and S.P. Harsha, “Chaotic dynamics of cylindrical roller bearing supported by unbalanced rotor due to localized defects”, Journal of Vibration and Control, pp. 01-11, Vol. 0, No.0, 2020.

9.         M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Seat to Head Transmissibility during exposure to vertical seat vibration: effects of posture and vibration magnitude”, International Journal of Acoustics and Vibration, pp. 3-11, Vol.24, No.1, 2019.

10.    Vikas Kumar and V. H. Saran, “Biodynamic Model of the Seated Human Body under the Vertical Whole Body Vibration Exposure”, International Journal of Acoustics and Vibration, pp. 657-664, Vol. 24, No. 4, 2019.

11.    Pravajyoti Patra, V. H. Saran and S.P. Harsha, “Non-linear dynamic response analysis of cylindrical roller bearings due to rotational speed”, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, pp. 379-390, Vol. 233, No.2, 2018.

12.    M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Effects of posture and vibration magnitude on seat to head transmissibility during exposure to fore-and-aft vibration”, Journal of Low Frequency Noise, Vibration and Active Control, pp. 826-838, Vol. 38, No. 2, 2018. 

13.    Pravajyoti Patra, V.H. Saran and S.P. Harsha, “Nonlinear Dynamic Response Analysis of Cylindrical Roller Bearings due to Unbalance”, Advances in Engineering Design, pp. 815-824, Chapter 76, Springer, 2018.

14.    Aman Kumar, V. H. Saran and S. P. Harsha, “Biodynamic modelling of seated human body under whole body vibration exposure using an artificial neural network,” International Journal of Vehicle Noise and Vibrations, pp. 187-199, Vol. 13, Nos. 3-4, 2017.

15.    M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Effects of vibration magnitude and posture on seat-to-head-transmissibility responses of seated occupants exposed to lateral vibration”, International Journal of Vehicle Noise and Vibration, pp. 42-59, Vol. 12, No. 1, 2016.

16.    M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Interference in writing performance under whole-body vibration exposure together with subject posture”, International Journal of Vehicle Noise and Vibration, pp.182 – 198, Vol.12, No.2, 2016.

17.    Vikas Kumar and V. H. Saran, “Seat to Head Transmissibility and Reading Discomfort of the Seated Subjects Exposed to Whole Body Vibration,” International Journal of Acoustics and Vibration, pp. 67-74, Vol 21, No.1, 2016.

18.    Ishbir Singh, S.P. Nigam and V.H. Saran, “Modal analysis of human body vibration model for Indian subjects under sitting posture”, Ergonomics, pp. 1117-1132, Vol. 58, No.7, 2015.

19.    Vivek Gupta, V.H. Saran and Satish C. Sharma, “A novel technique to measure the rolling resistance of tyres using force transducer”, Journal of the Institution of Engineers (India): Series C, pp. 325-330, Vol 96, No.3, 2015.

20.    Vikas Kumar and V. H. Saran, “Influence of postures and vibration magnitude on seat-to-head transmissibility during uniaxial whole body vibration exposure”, International. Journal of Vehicle Noise and Vibration, pp. 149-164, Vol.11, No.2, 2015.

21.    Vikas Kumar and V. H. Saran, “Influence of reading format on reading activity under uniaxial whole body vibration”, International Journal of Industrial Ergonomics, pp. 520-527, Vol. 44, 2014.

22.    Harsha S. P., M. Desta, A. S. Prashanth and V. H. Saran, “Measurement and Bio-dynamic Model Development of Seated Human Subjects Exposed to Low Frequency Vibration Environment.” International Journal of Vehicle Noise and Vibrations, pp. 1- 24, Vol. 10 (2), 2014.

23.    A.S. Prashanth, N.V. Amar Kishore, V. H. Saran and S.P. Harsha, “Analysis of Seated Human Body Under Low Frequency Vibrations Using Transmissibility and Driving Point Mechanical Impedance”, International Journal of Engineering Res & Tech, pp. 734 -744, V.2, No. 6, 2013.

24.    R. Narayanamoorthy and V. H. Saran, "Investigation of activity performance on laptop in vibration environment", International Journal of Industrial Ergonomics, pp. 513-524, Vol. 42, 2012.

25.    M. K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Interference in reading an e-paper under Whole-body Vibration exposure with subject posture", International Journal of Acoustics and Vibration, pp. 100- 107, Vol 11, No. 2, 2012.

26.    M. Desta, V.H. Saran and S.P. Harsha, “Effects of Inter-Subject Variability and Vibration Magnitude on Vibration Transmission to Head during Exposure to Whole-Body Vertical Vibration”, International Journal of Acoustics and Vibration, pp. 88- 97, Vol. 16, No.2, 2011.

27.    M.K. Bhiwapurkar, V.H. Saran, S.P. Harsha, V.K.Goel and Mats Berg, “Effect of magnitudes and directions (mono-axis and multi-axis) of whole body-vibration exposures and subjects postures on the sketching performance”, Proceedings of the Institution of Mechanical Engineers, Part F, Journal Of Rail & Rapid Transit, pp. 71-83, Vol. 225, No. 1, 2011.

28.    M. K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Objective and subjective responses of seated subjects while reading Hindi newspaper under multi axis whole-body vibration”, International Journal of Industrial Ergonomics, pp. 625- 633, Vol. 141, 2011.

29.    M.K. Bhiwapurkar, V. H. Saran and S.P. Harsha, “Quantitative evaluation of distortion in sketching under mono and dual axis whole body vibration”, Industrial Health, pp. 410-420, Vol. 49, No. 4, 2011. 

30.    R. Narayanamoorthy and V. H. Saran, “Error Analysis of Task Performance with Laptop in Vibration Environment”, Computers in Human Behaviour, pp. 2263-270, Vol. 27, 2011.

31.    M.K. Bhiwapurkar, V.H. Saran, S.P. Harsha, V.K. Goel and Mats Berg, “Influence of Mono-axis Random Vibration on Reading Activity”, Industrial Health, pp. 675-681,Vol. 48, 2010.

32.    M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Effect of Multi-axis Whole Body Vibration Exposures and Subject Postures on Typing Performance”, International Journal of Engineering Science and Technology, pp. 3614-3620, Vol. 2(8), 2010.

33.    M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “Effect of Multi-axis Vibration and Subject Postures on Sketching Distortion”, International Journal of Engineering Science and Technology, pp.14-24, Vol. 2(10), 2010.

34.    P. Pul Singh, Jitendra Yadav, M.K. Bhiwapurkar, V.H. Saran and S.P. Harsha, “A futuristic model for activity comfort using artificial neural network”, Indian Jnl. of Engineering Science and Technology, V.4, No. 1, 2010, pp. 108-113.

35.    R. Narayanamoorthy, V. K. Goel and V. H. Saran, “Vibration measurement- a tool for evaluating activity comfort in trains”, Jnl. of Instrumentation Society of India, V 39, No.3, 2009, pp. 189-193.

36.    V. H. Saran and V.K. Goel, “Ride Behaviour of Three-Wheeled Vehicle- Model and Optimization” Advances in Vibration Engineering, pp. 65-78, Vol. 6, No. 1, 2007. 

37.    V. H. Saran and V.K. Goel, “Ride Behaviour of Three-Wheeled Vehicle- Model and Optimization” Advances in Vibration Engineering, pp. 65-78, Vol. 6, No. 1, 2007.

38.    K. Ramji, A. Gupta, V.H. Saran, V.K. Goel and V. Kumar, “Road Roughness Measurements using PSD Approach”, Journal of The Institution of Engineers (India), pp.193-200, Vol.85, 2004.

39.    K. Ramji, V. K. Goel, and V.H. Saran, “Stiffness properties of small sized pneumatic tyres”, Proceedings of the Institution of Mechanical Engineers, Part D, pp.107-114, Vol. 216, 2002.

40.    V.H. Saran and V.K. Goel, “Rolling dynamic stiffness and damping characteristics of small sized pneumatic tyres”, Proceedings of the Institution of Mechanical Engineers, Part D, pp. 243-248, Vol. 214, No.3, 2000.