Book Chapters/Proceedings

1. Kumar S., Dvivedi A. (2020) On Performance Evaluation of Helical Grooved Tool During Rotary Tool Micro-ultrasonic Machining. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
2. Arya R.K., Dvivedi A. (2020) Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
3. Ramver, Yadav V.K., Kumar P., Dvivedi A. (2020) Experimental Investigation on Surface Morphology of Micro-EDMed Ti-6Al-4 V Alloy. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore.
4. Yadav V.K., Ramver, Kumar P., Dvivedi A. (2020) Investigation on the Effect of Input Parameters on Surface Quality During Rotary Tool Near-Dry EDM. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore.
5. Singh T., Dvivedi A. (2019) Experimental Investigations on the Effect of Energy Interaction Durations During Micro-channeling with ECDM. In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
6. Ramver, Dvivedi A., Kumar P. (2019) On Improvement in Surface Integrity of µ-EDMed Ti–6Al–4V Alloy by µ-ECM Process. In: The Minerals, Metals & Materials Series (eds) TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham.
7. Yadav V.K., Kumar P., Dvivedi A. (2017) Investigations on Rotary Tool Near-Dry Electric Discharge Machining. In: Wang S., Free M., Alam S., Zhang M., Taylor P. (eds) Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies. The Minerals, Metals & Materials Series. Springer, Cham.
8. Dhakar K., Dvivedi A. (2017) Dry and Near-Dry Electric Discharge Machining Processes. In: Gupta K. (eds) Advanced Manufacturing Technologies. Materials Forming, Machining and Tribology. Springer, Cham.
9. Kumar S., Dvivedi A., Kumar P. (2017) On Tool Wear in Rotary Tool Micro-Ultrasonic Machining. In: Meyers M. et al. (eds) Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham.
10. Singh, I., Debnath, K. and Dvivedi, A. (2014). Mechanical Behavior of Biocomposites Under Different Operating Environments. In Lignocellulosic Polymer Composites, V.K. Thakur (Ed.). doi:10.1002/9781118773949.ch18.
11. Vishwakarma U.K., Dvivedi A., Kumar P. (2013) Finite Element Modeling of Material Removal Rate in Powder Mixed Electric Discharge Machining of Al-SiC Metal Matrix Composites. In: Zhang L., Allanore A., Wang C., Yurko J.A., Crapps J. (eds) Materials Processing Fundamentals. Springer, Cham.
12. Cheema M.S., Dvivedi A., Sharma A.K., Biswas S. (2013) Multicriteria optimization of rotary tool electric discharge machining on metal matrix composite. In: Zhang L., Allanore A., Wang C., Yurko J.A., Crapps J. (eds) Materials Processing Fundamentals. Springer, Cham.
13. Debnath K., Singh I., Dvivedi A. and Kumar P. (2013) ”Natural Fibre Reinforced-Polymer Composites for Wind Turbine Blades: Challenges and Opportunities”, In book: Recent Advances in Composite Materials for Wind Turbine Blades, Chapter: 2, Publisher: The World Academic Publishing Co. Ltd., Editors: Dr. Brahim Attaf, pp.25-39.
14. Vishwakarma U.K., Dvivedi A. and Kumar P., (2013) “Finite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al-SiC Metal Matrix Composites”, in Materials Processing Fundamentals (eds L. Zhang, A. Allanore, C. Wang, J. A. Yurko and J. Crapps), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118662199.ch17, 151-158.
15. Singh I., Debnath K., Dvivedi A., (2013) “Joining of Natural Fiber Reinforced Thermoplastic Composites” Biomass Based Biocomposites (eds Thakur VK, Singha AS), Smithers Rapra, Rapra Publishing, Akron, OH, USA, ISBN:9781847359803, Ch 8, 145-154.
16. Dvivedi, A., Kumar, P., Singh, I., (2011) “Machining Characteristics of Metal Matrix Composite Using Electric Discharge Machining”, Manufacturing Technology Research – Vol 1 (eds. J. Paulo Davim and Mark. J. Jackson), ISBN: 978-1-61122-001-8, Nova Science Publishers, USA, 43-68.

Research Publications in Conferences

1. Arya, R. K., Kumar, S. & Dvivedi, A. ANFIS modelling of aspect ratio in drilling of glass using pressurized flow electrochemical discharge machining process, International Conference on Precision, Meso, Micro & Nano Engineering (COPEN-11), IIT Indore, India, 2019.
2. Arya R. K. & Dvivedi A. Thermal Loading Effect During Machining of Borosilicate Glass Using ECDM Process,  IOP Conference Series: Materials Science and Engineering, 647, 012001, 2019
3. Rathore, R. S. & Dvivedi, A. Effect of peak current on the ECDM process. Proceedings of the International Conference on Precision, Meso, Micro & Nano Engineering (COPEN-11), IIT Indore, India, 2019.
4. Rathore, R. S. & Dvivedi, A. Effect of tool immersion depth on discharge energy during ECDM of borosilicate glass. Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-19), IIT Ropar, India, 2019.
5. Singh, T. & Dvivedi, A. Fabrication of tapered holes in borosilicate glass for µ-fluidic applications by ECDM. Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-19), IIT Ropar, India, 2019.
6. Kumar, S. & Dvivedi, A. Parametric investigations and optimization of rotary tool micro-USM using Taguchi methodology, International Conference on Production and Industrial Engineering (CPIE-2019) NIT Jalandhar, India, 2019.
7. Singh, T. & Dvivedi, A. On performance evaluation of triplex hybrid process UA-ECDtrepanning, International Conference on Production and Industrial Engineering (CPIE-2019) NIT Jalandhar, Punjab, India, 2019.
8. Kumar, S. & Dvivedi, A. On Performance Evaluation of Helical Grooved Tool during Rotary Tool Micro-ultrasonic Machining. 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai, India, 2018.
9. Arya, R. K. & Dvivedi, A. Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode. International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai, India, 2018.
10. Singh, T. & Dvivedi, A. Experimental investigation on the effect of energy interaction duration during micro channeling with ECDM. 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai, India, 2018.
11. Kumar, R., Kumar, S. & Dvivedi, A. Effect of tool geometry on performance of rotary tool micro-USM. International Conference on Nano-technology, Ideas, Innovations and Initiatives (ICN3I-2017), IIT Roorkee, India, 2017.
12. Yadav, V. K., Kumar, P., & Dvivedi A. Parametric Investigations on Rotary Tool Near-dry Electric Discharge Machining. International Conference on Precision Meso Micro and Nano Engineering (COPEN-10). IIT Madras, India, 2017.
13. Kumar, S. & Dvivedi A. An ultrasonic micro-machining approach for fabrication of micro-molds., S. 12^th Uttarakhand State Science & Technology Congress 2017-18, Vigyan Dham Dehradun, India, 2017.
14. Kumar, S. & Dvivedi A. Parametric effect on width overcut in rotary tool micro-ultrasonic machining. International Conference on Technology & Trust (ICTT-2017) Greater Noida Institute of Technology, Greater Noida, India, 2017.
15. Kumar, S. & Dvivedi, A. On comparative study of micro-ultrasonic drilling with and without tool rotation. International Conference on Production and Industrial Engineering (CPIE-2016) NIT Jalandhar, India, pp. 327-335, 2016.
16. Kumar, S., & Dvivedi, A. Investigations on Fabrication of Microchannels using Rotary Tool Micro-ultrasonic Machining. 6th International and 27th All India Manufacturing Technology Design and Research Conference (AIMTDR-2016), Pune, India, pp. 444-447, 2016.
17. S. Kumar and A. Dvivedi Fabrication of 3D complex micro-features used in bio-medical applications. In 3rd International Conference on Nanotechnology for Better Living (NBL-2016) NIT Srinagar, India, pp. 255, 2016.
18. Arora, P., Dhakar, K. & Dvivedi., A., Effect of Process Parameters of Near-dry EDM on Machining of a Conductive Material. Processing and Fabrication of Advanced Materials (PFAM-XXIII) IIT Guwahati, India, pp. 511-517, 2014.
19. Dhakar, K. & Dvivedi, A., Study of the Near-dry Electric Discharge Machining. Processing and Fabrication of Advanced Materials (PFAM-XXIII) IIT Guwahati, pp. 499-504, 2014.
20. Venkatesh, G., Singh, T., Sharma, A. K., Dvivedi, A. A fuzzy logic approach in prediction of responses while finishing microchannels using abrasive flow machining. Processing and Fabrication of Advanced Materials (PFAM-XXIII) IIT Guwahati, India, pp. 374-383, 2014.
21. Debanth, K., Singh, I. & Dvivedi, A., Comprehensive analysis of forces during drilling of nettle/polypropylene bio-composites. International Symposium on Green Manufacturing and Applications (ISGMA 2014), Busan, South Korea, 2014.
22. Dhakar, K. & Dvivedi, A., Experimental investigation on near-dry electric discharge machining. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), IIT Guwahati, Assam, India, 2014.
23. Gupta, P. K., Dvivedi, A. & Kumar, P., Impact of pulse width on hole overcut in an electrochemical discharge machining of blind holes. Processing and Fabrication of Advanced Materials (PFAM-XXIII) IIT Guwahati, India, pp. 493-498, 2014.
24. Debnath, K., Dhawan, V., Singh, I. & Dvivedi, A., Effect of natural fillers on wear behavior of glass-fiber-reinforced epoxy composites. International Conference on Research and Innovations in Mechanical Engineering (ICRIME-2013), GNDEC Ludhiana, India, pp. 441-450, 2014.
25. Cheema, M. S., Dvivedi, A., Sharma, A. K. & Acharya, S., Experimental investigations in development of 3D microchannels through ultrasonic micromachining.  9th International workshop on micro factories (IWMF2014), Honolulu, USA, 2014.
26. Singh, S., Singh, I., Dvivedi, A., & Davim, J. P. SiC p-Reinforced Al6063 MMCs: Mechanical Behavior and Microstructural Analysis. International Conference on Research and Innovations in Mechanical Engineering, Springer, New Delhi, pp. 451-464, 2014.
27. Debnath, K., Singh, I., Dvivedi, A., & Kumar, P. Natural Fibre-Reinforced Polymer Composites for Wind Turbine Blades: Challenges and Opportunities. Recent advances in composite materials for wind turbine blades. Hong Kong, pp. 25,-40, 2013.
28. Debanth, K., Singh, I. & Dvivedi, A. Vibration-assisted drilling of carbon fiber reinforced composites. Processing and Fabrication of Advanced Materials (PFAM XXII), National University of Singapore (NUS), Singapore, 2013.
29. Venkatesh, G., Singh, T., Sharma, A. K. & Dvivedi, A. Finishing of micro-channels using abrasive flow machining. International Conference on Research and Innovations in Mechanical Engineering (ICRIME-2013), GNDEC Ludhiana, India, pp. 243-252, 2013.
30. Cheema, M. S., Dvivedi, A. & Sharma, A. K. An ultrasonic micromachining setup for machining of 3D geometries. International Conference on Research and Innovations in Mechanical Engineering (ICRIME-2013), GNDEC Ludhiana, India, pp.253-260, 2013.
31. Debanth, K., Singh, I. & Dvivedi, A. Drilling behavior of natural fiber reinforced polymer (thermosetting and thermoplastic) composites. 22nd International Conference on Processing and Fabrication of Advanced Materials (PFAM XXII), National University of Singapore (NUS), Singapore, 2013.
32. Debanth, K., Dhawan, V., Singh, I. & Dvivedi, A. Rotary ultrasonic drilling of glass/epoxy composite laminates. International Conference and Exhibition on Reinforced Plastics (ICERP 2013), FRP Institute, Bombay Exhibition Center, Mumbai, India, 2013.
33. Cheema, M. S., Dvivedi, A. & Sharma, A. K. On material removal mechanism by single particle impingement in ultrasonic machining. International Conference on smart Technologies for Mechanical Engineering, DTU, Delhi, India, 2013. 
34. Dhakar, K. & Dvivedi, A. Experimental investigation of green electric discharge machining of Al-SiC metal matrix composites. International Conference on smart Technologies for Mechanical Engineering, DTU, Delhi, India, 2013.
35. Biswas, S., Vishwakarma, U. K., Dvivedi, A. & Kumar D. FEA simulation of material removal rate in rotary electro-discharge machining of copper–steel (EN-8). International Conference on Advances in Manufacturing Technology (ICAMT), CET, Chennai, India, 2012.
36. Arya, R. K., Dvivedi, A., Karunakar, D. B. & Vishwakarma, U. K. Modeling of material removal mechanism of EDM for Al6063/SiC metal matrix composite. International Conference on Advances in Manufacturing Technology (ICAMT), CET, Chennai, India, 2012.
37. Debnath, K., Dvivedi, A. & Singh I. Wear Behavior of Glass/Epoxy Composites Filled with Rice Husk. 3rd International Multi component Polymer Conference (IMPC-2012), Kottayam, India, 2012.
38. Singh, S., Singh, I. & Dvivedi A. Prediction of surface roughness in drilling of Metal Matrix Composites using ‘ANFIS’. Processing and Fabrication of Advanced Materials, IIT Guwahati, India, 2012.
39. Vishwakarma, U. K., Dvivedi, A. & Kumar, P. Prediction of material removal rate in rotary tool electric discharge machining using adaptive neuro-fuzzy inference system. 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3-2012), Singapore, 2012.
40. Debnath, K., Singh, I. & Dvivedi, A. Ultrasonic vibration assisted hole making in glass-epoxy laminates. Processing and Fabrication of Advanced Materials, IIT Guwahati, India, 2012.
41. Debnath, K., Singh, I. & Dvivedi, A. Development and tribological characterization of GFRP laminates with natural fillers. 4th international and 25th all India manufacturing technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, West Bengal, India,  2012.
42. Vishwakarma, U. K., Dvivedi, A. & Kumar, P. Prediction of material removal rate in powder mixed electrical discharge machining using adaptive neuro fuzzy interface system. 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2012), Jadavpur University, India, 2002.
43. Vishwakarma, U. K., Dvivedi, A. & Kumar, P. Prediction of material removal rate in rotary tool electrical discharge machining of Al6063 SiC metal matrix composite using fuzzy logics. Processing and Fabrication of Advanced Materials, IIT Guwahati, India, 2012.
44. Vishwakarma, U. K., Dvivedi, A. & Kumar P. FEA modeling of material removal rate in electrical discharge machining of Al6063/SiC composites. International Conference on Mechanical, Industrial and Manufacturing Engineering (ICMIME, 2012), Zurich, Switzerland, 2002.
45. Saini, V. K., Sharma, D. & Dvivedi, A. Optimization of cutting parameters of Cu turning by applying Taguchi method. Proceedings National seminar on Emerging Frontiers of Mechanical Engineering for New Generation Industry, Ghaziabad, 2011.
46. Singh, I., Singh, H., Dvivedi, A. & Kumar, P. Tensile and compressive behavior of composite joints: Experimental and finite element study. 16th International Conference on Composite Structures (ICCS-16), University of Porto, Faculty of Engineering (FEUP), 2011.
47. Singh, S., Singh, A., Singh, I. & Dvivedi, A. Optimization of the process parameters for drilling of metal matrix composites (MMC) using Taguchi analysis. 20th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XX), Hong Kong, 2011.
48. Kumar, K., Dvivedi, A. & Kumar, S. Surface quality evaluation for wire EDM of M2HSS. 3rd International and 24th AIMTDR Conference, College of Engineering, Andhra University, Visakhapatnam, India, 2010.
49. Singh, I., Shankara, M. A. G., Jaiswar, S. & Dvivedi, A. Experimental investigation of the peel-up type of delamination in drilling of woven GFRP laminates. 17th International Symposium PFAM XVII Processing and Fabrication of Advanced Material, IIT Delhi, India, 2008.
50. Dvivedi, A., Kumar, P. & Singh, I. Electric discharge machining of A6063-15%SiCp metal matrix composite. International Conference on Advances in Manufacturing Technology for Young Engineers, Indira Gandhi Centre for Atomic Research, Chennai, India, 2008.
51. Dvivedi, A., Kumar, P. & Singh, I. Electric discharge machining of metal matrix composite. Proceedings of RDMQM- 2007, PEC Chandigarh, India, 2007.
52. Dvivedi, A., Kumar, P. & Singh, I. Optimization of EDM on A6063-15%SiCp MMC through Taguchi method. Proceedings of QRMAES – 2007, NIT Hamirpur, India, 2007.
53. Dvivedi, A., Kumar, P. & Singh, I. Electric discharge machining of A6063-10%SiCp metal matrix composite. International Conference on Advanced Manufacturing Technologies, Central Mechanical Engineering Research Institute, Durgapur, India, 2007.
54. Dvivedi, A., Kumar, P. & Singh, I. Experimental analysis in ultrasonic drilling of titanium using Taguchi technique. 1st International and 22nd AIMTDR Conference, IIT Roorkee, India, 2006.
55. Dvivedi, A., Kumar, P. & Singh, I. Processing of metal matrix composites by unconventional techniques. National conference on recent developments and future trends in mechanical engineering, NIT Hamirpur, India, 2006.
56. Negi, V. & Dvivedi, A. Investigation and optimization of response time in hydraulic power steering using Taguchi technique. 14th ISME International Conference (ISME-2005), DCE, New Delhi, India, 2005.
57. Sohagpure, L., Dvivedi, A. & Kumar, P. Quality function deployment in process industry. 14th ISME International Conference (ISME-2005), DCE, New Delhi, India, 2005.
58. Dvivedi, A. & Kumar, P. QFD in service sector – A case study. 13th ISME International Conference (ISME-2003), IIT Roorkee, India, 2003.

1. Singh, T., Dvivedi, A. On prolongation of discharge regime during ECDM by titrated flow of electrolyte. Int J Adv Manuf Technol (2020). https://doi.org/10.1007/s00170-020-05126-y. (IF-2.496)
2. Singh, R., Dvivedi, A. & Kumar, P. EDM of high aspect ratio micro-holes on Ti-6Al-4V alloy by synchronizing energy interactions, 2020, https://doi.org/10.1080/10426914.2020.1762207. (IF-3.690)
3. Kumar, S., & Dvivedi, A. Development of material removal rate model and performance evaluation of ultrasonic turning process, Materials and Manufacturing Processes, 2020, https://doi.org/10.1080/10426914.2020.1718699. (IF-3.690)
4. Rathore, R., & Dvivedi A. Sonication of tool electrode for utilizing high discharge energy during ECDM. Materials and Manufacturing Processes, 2020, 415-429, 35 (4). (IF-3.690)
5. Arya, R. K., & Dvivedi, A. Investigations on quantification and replenishment of vaporized electrolyte during deep micro-holes drilling using pressurized flow-ECDM process. Journal of Materials Processing Technology, pp. 217-229, Vol. 266, 2019. (IF-4.178)
6. Pawariya, K., Dvivedi, A., & Singh, T. On performance enhancement of electrochemical discharge trepanning (ECDT) process by sonication of tool electrode. Precision Engineering, pp. 8-19, Vol. 56, 2019. (IF-2.685)
7. Kumar, S., & Dvivedi, A. Effect of Tool Materials on Performance of Rotary Tool Micro-USM during Fabrication of Microchannels, Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp. 1-16, Vol. 41:432, 2019. (IF-1.743)
8. Yadav, V. K., Kumar, P., & Dvivedi, A. Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium. Materials and Manufacturing Processes, pp. 1832-1846, Vol. 34(16), 2019. (IF-3.35)
9. Singh, T., Dvivedi, A. & Rathore, R. Experimental investigations, empirical modeling and multi objective optimization of performance characteristics for ECDD with pressurized feeding method. Measurement, pp. 1-12, Vol. 149, 2020. (IF-3.364)
10. Singh, T., Dvivedi, A. & Arya, R. K. Fabrication of micro-slits using W-ECDM process with textured wire surface: An experimental investigation on kerf overcut reduction and straightness improvement. Precision Engineering, pp.211-223, Vol. 59, 2019. (IF-3.3)
11. Dhakar, K., Chaudhary, K., Dvivedi, A., & Bambalge, O. An environment-friendly and sustainable machining method: near-dry EDM. Materials and Manufacturing Processes, pp. 1307-1315, Vol. 34 (12), 2019. (IF-3.35)
12. Kumar, S., & Dvivedi, A. Micro-ultrasonic drilling of monocrystalline silicon: An experimental investigation on machined surface topography and optimization using User's preference rating based TOPSIS. Materials Science in Semiconductor Processing, Vol. 102, 2019, https://doi.org/10.1016/j.mssp.2019.104584. (IF-2.722)
13. Singh, T., Arya, R. K. & Dvivedi, A. Experimental investigation into rotary mode electrochemical discharge drilling (RM-ECDD) of metal matrix composites. Machining Science and Technology, pp. 1-32, 2019, DOI: 10.1080/10910344.2019.1636270. (IF-1.176)
14. Kumar, S., & Dvivedi, A. On machining of hard and brittle materials using rotary tool micro-ultrasonic drilling process. Materials and Manufacturing Processes, pp. 736-748, Vol. 34(7), 2019. (IF-3.35)
15. Addis, S., Dvivedi, A., & Beshah, B. Quality management as a tool for job satisfaction improvement in low-level technology organizations: the case of Ethiopia. Production Planning & Control, pp. 665-681, Vol. 30(8), 2019. (IF-3.34)
16. Yadav, V.K., Kumar, P., & Dvivedi, A. Effect of tool rotation in near-dry EDM process on machining characteristics of HSS. Materials and Manufacturing Processes, pp. 779-790, Vol. 34(7), 2019. (IF-3.35)
17. Jha, N. K., Singh, T., Dvivedi, A., & Rajesha, S. Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s. Materials and Manufacturing Processes, pp. 243-255, Vol. 34(3), 2019. (IF-3.35)
18. Kumar, S., & Dvivedi, A. On effect of tool rotation on performance of rotary tool micro-ultrasonic machining. Materials and Manufacturing Processes, pp. 475-486, Vol. 34(5), 2019. (IF-3.35)
19. Filketu, S., Dvivedi, A., & Abebe, B. B. Decision-making on job satisfaction improvement programmes using fuzzy QFD model: a case study in Ethiopia. Total Quality Management & Business Excellence, pp. 1068-1091, Vol. 30 (9-10), 2019. (IF-2.181)
20. Kumar, S., & Dvivedi, A. Fabrication of microchannels using rotary tool micro-USM: An experimental investigation on tool wear reduction and form accuracy improvement. Journal of Manufacturing Processes, pp. 802-815, Vol. 32, 2018. (IF-3.462)
21. Singh, T., & Dvivedi, A. (2018). On performance evaluation of textured tools during micro-channeling with ECDM. Journal of Manufacturing Processes, pp. 699-713, Vol. 32, 2018. (IF-3.462)
22. Singh, T., & Dvivedi, A. On pressurized feeding approach for effective control on working gap in ECDM. Materials and Manufacturing Processes, pp. 462-473, Vol. 33(4), 2017. (IF-3.35)
23. Singh, S., Singh, I., & Dvivedi, A. Design and development of novel cost effective casting route for production of metal matrix composites (MMCs). International Journal of Cast Metals Research, pp. 356-364, Vol. 30(6), 2017. . (IF-0.978)
24. Debnath, K., Singh, I. & Dvivedi, A. On the analysis of force during secondary processing of natural fiber reinforced composite laminates. Polymer Composites, pp. 164-174, Vol. 38(1), 2017. (IF-2.268)
25. Singh, T. & Dvivedi, A. Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods. International Journal of Machine Tools and Manufacture, pp. 1-13, Vol. 105, 2016. (IF-6.039)
26. Dhakar, K., Dvivedi, A., & Dhiman, A. Experimental investigation on effects of dielectric mediums in near-dry electric discharge machining. Journal of Mechanical Science and Technology, pp. 2179-2185, Vol. 30(5), 2016. (IF-1.221)
27. Cheema, M. S., Singh, P. K., Tyagi, O., Dvivedi, A. & Sharma, A. K. Tool wear and form accuracy in ultrasonically machined micro channels. Measurement, pp. 85-94, Vol. 81, 2016. (IF-2.791)
28. Gupta, P. K., Dvivedi, A. & Kumar, P. Effect of pulse duration on quality characteristics of blind hole drilled in glass by ECDM. Materials and Manufacturing Processes, pp. 1740-1768, Vol. 31(13), 2016. (IF-3.35)
29. Dhakar, K. & Dvivedi, A. Parametric evaluation on near-dry electric discharge machining. Materials and Manufacturing Processes, pp. 413-421, Vol. 31(4), 2016. (IF-3.35)
30. Gupta, P. K., Dvivedi, A. & Kumar, P. Developments on electrochemical discharge machining: A review of experimental investigations on tool electrode process parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 910-92, Vol. 229(6), 2015. (IF-1.752)
31. Debnath, K., Singh, I. & Dvivedi, A. Rotary mode ultrasonic drilling of glass fiber-reinforced epoxy laminates. Journal of Composite Materials, pp. 949-963, Vol. 49(8), 2015. (IF-1.755)
32. Cheema, M. S., Dvivedi, A. & Sharma, A. K. Tool wear studies in fabrication of microchannels in ultrasonic micromachining. Ultrasonics, pp. 57–64, Vol. 57, 2015. (IF-2.598)
33. Pandey, H., Dhakar, K., Dvivedi, A. & Kumar, P. Parametric investigation and optimization of near-dry electrical discharge machining. Journal of Scientific and Industrial Research, pp. 508-511, Vol. 74(9), 2015. (IF-0.735)
34. Debnath, K., Singh, I. & Dvivedi A. Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites. Materials and Manufacturing Processes, pp. 1401-1409, Vol. 29(11-12), 2014. (IF-3.35)
35. Singh, S., Singh, I. & Dvivedi, A. Design and development of abrasive-assisted drilling process for improvement in surface finish during drilling of metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 858-867, Vol. 228 (8), 2014. (IF-1.752)
36. Cheema, M. S., Dvivedi, A., & Sharma, A. K. A hybrid approach to multi-criteria optimization based on user’s preference rating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 1733-1742, Vol. 227(11), 2013. (IF-1.752)
37. Singh, S., Singh, I. & Dvivedi, A. Multi objective optimization in drilling of Al6063/10%SiC metal matrix composite based on grey relational analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 1767-1776, Vol. 227(12), 2013. (IF-1.752)
38. Cheema, M. S., Venkatesh, G., Dvivedi, A. & Sharma, A. K. Developments in abrasive flow machining: a review on experimental investigations using abrasive flow machining variants and media. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 1951-1952, Vol. 226(12), 2012. (IF-1.752)
39. Dvivedi, A., Rajeev, V. R., Kumar, P. & Singh, I. Tribological characteristics of Al 6063–SiCp metal–matrix composite under reciprocating and wet conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, pp. 138-149, Vol. 226(2), 2012. (IF-1.137)
40. Dvivedi, A, Kumar, P. & Singh, I. Effect of EDM process parameters on surface quality of Al 6063 SiCp metal matrix composite. International Journal of Materials and Product Technology, pp. 357-377, Vol. 39 (3-4), 2010. (IF-0.674)
41. Kishore, R.A., Tiwari, R., Dvivedi, A. & Singh, I. Taguchi analysis of the residual tensile strength after drilling in glass fiber reinforced epoxy composites. Materials and Design, pp. 2186-2190, Vol. 30(6), 2009. (IF-5.77)
42. Dvivedi, A. & Kumar, P. Surface quality evaluation in ultrasonic drilling through the Taguchi technique. International Journal of Advanced Manufacturing Technology, pp. 131-140, Vol. 34, 2007. (IF-4.496)
43. Dvivedi, A., Kumar, P. & Dvivedi S. Quality function deployment for operation theaters - procedure & a case study. Productivity, pp. 75-84, Vol. 45(1), 2004.

Details of Indian Patents

- Development of Ultrasonic Micromachining: Micromachining: Two machining configurations were designed and developed for ultrasonic micromachining. Subsequently features less than 200 microns were successfully developed. This developed machining process can be used for drilling of micro holes; machining of micro channels, micro arrays and micro moulds and turning of hard-and-brittle materials.

- Development of grinding assisted Electrochemical Discharge Machining (GAECDM) The research work involved further hybridization of an already existing hybrid process. GAECDM process functions under a combined action of electrochemical effects, electrical discharge erosion, and direct mechanical grinding. The integration of the mechanical action in the form of grinding assistance eliminate the major problem of ‘passivation effect’ encountered in normal ECM process. The GAECD machine with multiple axes manipulator was designed and developed in advanced manufacturing laboratory, IIT Roorkee. Subsequently, another configuration of GAECD machine was designed and developed. This second machine can perform machining of cylindrical work parts.

- Ultrasonic drilling in fiber reinforced composites: A pioneer work of drilling in fiber reinforced composites was successfully done using Ultrasonic drilling process. The setup for the same was developed in-house with suitable modifications in commercially available ultrasonic machine.

- Development of Near-Dry Electric Discharge Machining (EDM): An environment friendly process variant of EDM was developed in-house. The conventional liquid dielectric was replaced by two-phase dielectric (gaseous and liquid phase). This results in process being economical and eco-friendly. Further, the material removal rate and surface quality obtained was better than conventional EDM.

- Development of Electric Discharge Form Machining (EDFM). The EDFM is a process variant of conventional EDM. A pioneer work in obtaining free form surfaces machined by EDM was achieved by in-house development of 5-axes manipulator. The manipulator provided motion to the workpiece in X, Y, U and V axes. Investigations are continued for thread machining, contour machining in macro as well as micro ranges on difficult-to-machine materials.

- Development of Rotary Electric Discharge Machining: Rotary tool electric discharge machining (REDM) is a process variant of EDM in which the tool electrode is rotated with simultaneous electrical discharges. The centrifugal force near discharge area in REDM provides effective flushing of inter electrode gap. Consequently, material removal rate and surface finish improves.

- Development of Magnetic Assisted Abrasive Flow Drilling: The work involved development and optimization of hybrid drilling process for enhancing quality characteristics during drilling on metal matrix composites (MMC). This novel process was developed in-house. Further, this project involved development of new drill point geometry for machining of MMC’s.

- Development of setup for stir casting Manufacturing of Near-Net Shape MMC through development of stir casting retaining its cost effectiveness and still producing acceptable results. A novel setup was developed in-house for fabrication of Near-Net-Shape MMC using stir-squeeze-Quench casting route.

- Development of Powder Electric Discharge Machining (PEDM). Powder Electric Discharge Machining is a process variant of EDM. The powders (conductive/non-conductive) are mixed with dielectric fluid of EDM. The mixing of powders changes the conductivity of the dielectric further and improves spark discharge. This improves material removal rate and produces mirror finish surfaces in hard-to-machine materials. This setup for Powder-EDM was developed in-house.

- Quality Function Deployment in Service Sector: A case study This project was aimed at improving the Quality of Service functions in the Operation Theatres of hospitals by improving the work environment using Quality Function Deployment. The objective of this project was established after request from H.I.M.S., Dehradun’s management. I being the facilitator identified these problems and developed the guidelines to rectify them using the Quality Function Deployment technique.

- Powder Mixed Rotary Tool Electro Discharge Deposition Process This process was developed to deposit abrasive particles on micro-tools and other micro-products. The potential of this process is that any powdered material can be made to deposit over a conducting material. The products from this process can be used for micro-fabrication. Additionally, the developed facility can produce surface textures on micro components.

- Innovative device for creating tissue plane cleavage by the hydro - dissection method Designed and developed an innovative device for creating tissue plane cleavage by hydro-dissection. This device is presently used for cleft lip/palate reconstructive surgery. This device has reduced cleft palate surgery time to nearly half and had brought down the complication rate to near zero.

- Development of Ultrasonic Micromachining Facility: - Micromachining: Two machining configurations were designed and developed for ultrasonic micromachining. Subsequently features less than 200 microns were successfully developed. This developed machining process can be used for drilling of micro holes; machining of micro channels, micro arrays and micro moulds on hard and brittle materials.

- Ultrasonic Turning: Ultrasonic energy was effectively utilized for turning of hard-and-brittle materials. This resulted in development of a new machining process. This process is now being used for machining threads on hard-and-brittle materials. The facility was developed in-house.

- Development of grinding assisted Electrochemical Discharge Machining (GAECDM)Facility The development of GAECDM involves further hybridization of an already existing hybrid process. GAECDM process functions under a combined action of electrochemical effects, electrical discharge erosion, and direct mechanical grinding. The integration of the mechanical action in the form of grinding assistance eliminate the major problem of ‘passivation effect’ encountered in normal ECM process. It also removes any re-cast layer formed during EDM part of ECDM. Thus process performance enhances significantly. The GAECD machine with multiple axes manipulator was designed and developed in advanced manufacturing laboratory, IIT Roorkee. Subsequently, another configuration of GAECD machine was designed and developed. This second facility can perform machining of cylindrical work parts.

- Ultrasonic drilling on fiber reinforced composites: A pioneer work of drilling on fiber reinforced composites was successfully done using Ultrasonic drilling process. The setup for the same was developed in-house with suitable modifications in commercially available ultrasonic machine.

- Development of Near-Dry Electric Discharge Machining (EDM) Facility: An environment friendly process variant of EDM was developed in-house. The conventional liquid dielectric was replaced by two-phase dielectric (gaseous and liquid phase). The advantage being no harmful fumes are liberated while machining. This results in process being economical and eco-friendly. The developed process provided material removal rate and surface quality in comparison with conventional EDM higher by nearly five times and three times, respectively. This facility was designed and developed in-house.

- Development of Rotary Tool Near-Dry Electric Discharge Machining (EDM) Facility: The capabilities of Near-Dry Electric Discharge Machining (EDM) process were improved manifold by providing tool rotation during multi-phase flow of dielectric medium. The developed process provided material removal rate and surface quality in comparison with conventional EDM higher by nearly ten times and five times, respectively.

- Development of Electric Discharge Form Machining (EDFM) facility: The EDFM is a process variant of conventional EDM. A pioneer work in obtaining free form surfaces machined by EDM was achieved by in-house development of 5-axes manipulator. The manipulator provided motion to the workpiece in X, Y, U and V axes. Investigations are continued for thread machining, contour machining in macro as well as micro ranges on difficult-to-machine materials.

- Development of Rotary Electric Discharge Machining facility: Rotary tool electric discharge machining (REDM) is a process variant of EDM in which the tool electrode is rotated with simultaneous electrical discharges. The centrifugal force near discharge area in REDM provides effective flushing of inter electrode gap. Consequently, material removal rate and surface finish improves. This facility was developed in-house.

- Development of Magnetic Assisted Abrasive Flow Drilling: The work involved development and optimization of hybrid drilling process for enhancing quality characteristics during drilling on metal matrix composites (MMC). This novel process was developed in-house. Further, this project involved development of new drill point geometry for machining of MMC’s.

- Development of setup for stir casting facility: Manufacturing of Near-Net Shape MMC through development of stir casting retaining its cost effectiveness and still producing acceptable results. A novel setup was developed in-house for fabrication of Near-Net-Shape MMC using stir-squeeze-Quench casting route.

- Development of Powder Electric Discharge Machining (PEDM) facility: Powder Electric Discharge Machining is a process variant of EDM. The powders (conductive/non-conductive) are mixed with dielectric fluid of EDM. The mixing of powders changes the conductivity of the dielectric further and improves spark discharge. This improves material removal rate and produces mirror finish surfaces in hard-to-machine materials. This setup for Powder-EDM was developed in-house - Quality Function Deployment in Service Sector: A case study This project was aimed at improving the Quality of Service functions in the Operation Theatres of hospitals by improving the work environment using Quality Function Deployment. The study was conducted at the Himalayan Institute of Medical Sciences, Jolly Grant, Dehradun, U.K. India. The objective of this project was established after request from H.I.M.S. management. Intensive discussions with the doctors, surgical team and supporting staff along with patients at the above Institute revealed that despite of all care taken in operation theatre there still exist some shortcomings that are generally overlooked. I being the facilitator identified these problems and developed the guidelines to rectify them using the Quality Function Deployment technique.

- Development of Powder Mixed Rotary Tool Electro Discharge Deposition Facility: This process was developed to deposit abrasive particles on micro-tools and other micro-products. The potential of this process is that any powdered material can be made to deposit over a conducting material. The products from this process can be used for micro-fabrication. Additionally, the developed facility can produce surface textures on micro components.

- Innovative device for creating tissue plane cleavage by the hydro - dissection method: Designed and developed an innovative device for creating tissue plane cleavage by hydro-dissection. This device is presently used for cleft lip/palate reconstructive surgery. More than 15000 surgical operations had been performed using this device. This device has reduced cleft palate surgery time to nearly half and had brought down the complication rate to near zero.

- Development of Electrical discharge sawing facility: The electrical discharge sawing process was developed to machine difficult to cut materials such as metal matrix composites (MMCs), Inconel, titanium and tool steels etc. This facility was developed to reduce the high machining cost of abovementioned materials. The developed facility not only increased the productivity but also enhanced the machining quality by providing the better flushing into the inter-electrode gap. The developed facility is capable of fabrication of slits slots in all types of electrically conductive materials.

- Development of micro tool coating system: The development of micro tool coating system was aimed to fabricate low cost diamond coated tools for micro machining applications. In this system, the uniformity of coating layer was ensured through the ultrasonic assistance that was provided to the electrolytic bath. The circulation system was also provided in this system to obviate the problems related with the settle of abrasive particles at the bottom of electrolytic bath.

- Development of modular accessory for mobility enhancement of manual wheel chair: A high quality, modular and compact attachment was developed to provide effortless motion to the manually operated wheelchair. The cost of the developed attachment is only 2.75% of existing products (784% reduction in cost). The attachment is compact, flexible and can be attached to any wheelchair with minor modifications. It is easy to install, lightweight and easy to use.

- Development of magnetic abrasive finishing facility: The magnetic abrasive finishing facility was developed to finish the difficult-to-machine materials such as titanium, tungsten Inconel etc. to enhance their functionality in many industrial applications. The facility is capable to provide nano level surface finish.

- Development of grinding assisted rotary disc electrochemical discharge machining (GA-RDECDM) facility: The developed grinding assisted rotary disk electrochemical discharge machining (GA-RDECDM) process integrates the concept of triplex hybridization. In GA-RDECDM, an abrasive coated rotary disk was used as a tool electrode. The abrasive coated disk provides micro gaps between the tool electrode and work material surface and thereby it results in thin and stable gas film formation. The breakdown of thin and stable gas films produce high frequency, low intensity discharges and consequently improves the machining performance. The additional abrasion that is imparted by rotating disk ensures the continuation of ECDM process. The major contribution of this research work is the development of a novel method for the fabrication of the slits on MMCs, slots and cutting of ceramic materials.

- Development of adaptive feedback controlled electric hydro dissection device: A hydro dissection device with feedback control facility was developed, which can be used for cleft lip and palate surgery. This innovative device provides smooth and controlled injection. Also, the device has special feature of monitoring and recording live data during the surgical procedure.

- Development of pressurized feeding system for ECDM process: The development of pressurized feeding system was motivated to control the working gap during ECDM process. In pressurized feeding system, the exerted pressure over the tool electrode maintains constant working gap (almost zero) between tool tip and work material. There is also a provision in the developed system to hold the work material, and to provide an appropriate feeding motion to maintain constant working gap during machining.

- Development of Adaptive Cutting Force Control System for Process Stability of Micro-USM process: A closed loop adaptive cutting force control system (modular system) was developed to provided excellent control over machining gap in USM process. This system keeps the process in control at all times throughout the machining and ensures improved results with higher efficiency with high quality of machined features. The developed system is flexible and it can also be used for other non-traditional machining processes both in macro and micro domain.

- Development of pressurized tool feeding system for ECDM process: A pressurized tool feeding system was developed for ECDM process. This system provides constant working gap during machining with balancing the feed force at a single location. The developed system can simultaneously machine multiple holes and complicated geometries on a single work material.

- Development of electrolyte filtration system for ECDM process: Electrolyte is an important component of ECDM process. However, the properties of electrolyte changes after a certain period of machining due to contamination (in the form of dissolved particles of anode and machined debris) of electrolyte. Therefore, a filtration system was developed wherein an ultra-membrane filter separate the contaminants during machining. The use of this system improves the usable life of electrolyte.

- Development of Shaped Tube Electrolytic Machining Facility: A facility to drill high aspect ratio holes on difficult to machine materials was developed. An adaptive feed control system was also developed to control inter electrode gap as desired, to work in macro to micromachining domain.

- Development of ultrasonic assisted electrochemical discharge trepanning (UA-ECDT) Facility : The developed facility of ultrasonic assisted electrochemical discharge trepanning (UA-ECDT) process integrates the concept of triplex hybridization. Where a tool electrode was made offset from the spindle axis as per the desired diameter of the hole to be machined, and an orbital motion along with the ultrasonic vibrations was provided to the tool electrode. The integration of ultrasonic vibrations in ECDT process facilitates evacuation of the sludge/debris from the machining zone. Also, it generates thin and stable gas film over the tool electrode. The use of UA-ECDT process improves the energy channelization index (ECI), and exhibits 10 times more ECI than the ECDT process.

- Development of Multi-Phase Flow ECDM Facility: Multi-Phase Flow ECDM facility was developed for drill of high aspect ratio holes on glass and ceramics. This facility extends the discharge regime to hydrodynamic regime.

- Development of a flexible device for multiple ultrasonic machining operations: A modular device was developed for micro-USM process. This device can be used for various machining operations such as drilling, milling, turning and threading on a single ultrasonic machining device.

- Development of Electromagnetic Stir Casting Facility: Electromagnetic stir casting facility was developed to add the particulate reinforcement in to the matrix melt. The objective was to overcome the problems of particle agglomeration and porosity during stir casting.

- Development of Ultrasonic assisted ECDM Facility: Ultrasonic assisted ECDM Facility was developed with objective of enhancing the efficiency of ECDM. This facility in comparisons with conventional ECDM is able to achieve higher depth of machining with low values of hole cut and thermal damage.

- Expert lectures delivered / Workshops conducted - “Challenges in developing IPRs in HEIs” invited talk in Training of Trainers program on, Innovation, IP and Entrepreneurship, on 22nd Feb, 2018, IPR Chair, IIT Roorkee.

- “Hybrid Micro-Machining: A NTM approach” invited lecture on 26th July 2017 at IMS, Ghaziabad. - “Advanced Manufacturing in micro-domain: invited lecture on 7th July. 2017 at Moradabad Institute of Technology, Moradabad, UP

- “Micro-Machining, Expert talk on 29th March, 2017 at GEC, Bikaner. - “Advanced Manufacturing”, Expert talk on 30th March, 2017 at College of Engineering & Technology, Bikaner: CET.

- “Non-traditional Micromachining” in course on Advanced Manufacturing Processes-2016 at Aligarh Muslim University under TEQIP, 08-12 Feb, 2016, Aligarh Muslim University.

- “Fabrication of Micro-reactor”, in course on Chemical Micro Process Engineering: Flow Modeling and Applications, 20th June, 2016, at QIP Centre, IIT Roorkee.

- “Development of Hybrid Racing Car”, in course on Ishan Vikas, National Initiative Program for Children of North Eastern States (MHRD), 27th June, 2016, IIT Roorkee.

- “Machining of Ti-6AI-4V Aerospace Material using Near dry EDM” in National Seminar on Indigenous Technology Base for Growth of Aerospace Ecosystem,, 28th November, 2015, Hindustan Aeronautics Limited, Bangalore.

- "Micro channel cutting", in course on Advances in Precision Manufacturing, June 8-12, 2015 at Defense Electronics Application Laboratory (DEAL), DRDO, Dehradun.

- "Advances in nonconventional machining", in course on Advances in Precision Manufacturing, June 8-12, 2015 at Defense Electronics Application Laboratory (DEAL), DRDO, Dehradun.

- “Ultrasonic Micromachining”, in course on Advanced Manufacturing Technology, June 8-12, 2015 at G B Pant Engineering College Pauri - Garhwal.

- “Development of Electrochemical Discharge Machining process for complicated shapes” in course on automation in manufacturing, May 4-15, 2015 at Delhi Technological University, Delhi.

- “Micro-machining of difficult-to-machine materials”, in course on precision manufacturing, July 14-18, 2014 at Department of Mechanical, production & Industrial and Automobile Engineering, Delhi Technological University, Delhi.

- "Micro-Machining", in course on Advances in Mechanical Engineering, May 14th & 15th, 2014 at Noida Institute of Engineering and Technology, Greater Noida.

- “Quality Function Deployment in service sector”, in course on recent advances in industrial engineering”, July 8-12, 2013 at Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar.

- “Advance Manufacturing Processes”, in one day seminar on October 22nd 2013, at Department of Mechanical Engineering, SHIATS, Allahabad.

- “Hybrid Machining”, March 17th, 2012 at GEC, Bikaner, Rajasthan.

- “Enhancing Organizational Competitiveness Change management”, June 7th & 8th, 2010 at Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar.

- “Advances in Mechanical Engineering”, March 23rd, 2009 at Faculty of Technology and Engineering, M.S. University of Baroda, Vadodara.

- “Enhancing Organizational Competitiveness in the Era of Globalization & Liberalization”, Jan 4th & 5th, 2010 at Department of Industrial and Production Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar.

- “QFD for Chemical Engineers”, September 16th, 2005 at Fussitech-2005, Institute of Technology & Management, Gwalior.

-Member, Pneumatic and Hydraulic Tools Sectional Committee, PGD 08, Bureau of Indian Standards.

-Reviewer for Journal of Micromanufacturing, The International Journal of Advanced Manufacturing Technology, Journal of Manufacturing Processes, International Journal of Mechanical Sciences, Ultrasonics, International Journal of Machining and Machinability of Materials, Journal of Composite Materials, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Machine Tools and Manufacture, Measurement, JMPT, etc.

-Member, Board of Studies at Uttarakhand Technical University.

-Member, Advisory at Graphic Era Hill University

-Member, Research Advisory Committee at DTU, Delhi.

-Member, Research Advisory Committee at NIT Jalandhar.

-Member, 43rd National Systems Conference on Innovative and Emerging Trends in Engineering Systems, IIT Roorkee, Dec 6-8, 2019.

-Member, International Advisory Council, 6th International Conference on Production & Industrial Engineering, Dr B R Ambedkar National Institute of Technology, Jalandhar, June 8-10, 2019

-Member, National Advisory, International Conference on Advances in Business and Engineering For Sustainability, ABES Engineering College, Ghaziabad, March 27-28, 2018.

-Member, Technical Advisory Committee, 2nd International Conference on Computational & Experimental Methods in Mechanical Engineering, G.L. Bajaj Institute of Technology & Management, Greater Noida, May 3 - 5, 2019.

-Member, Technical Committee, 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018), Amity School of Engineering & Technology, Amity University, Oct 3 – 5, 2018.

-Member, Media and Publicity, Processing and Fabrication of Advanced Materials: XXIII, Department of Mechanical & Industrial Engineering Indian Institute of Technology Roorkee, Dec 5-7, 2014.

-Member, Advisory Committee, 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM 2013), IIT Roorkee, Dec. 18 -20, 2013.

-Member, Programme Committee for International Conference on Recent Trends in Mechanical Engineering (RTME2013), Dubai, UAE, May 18-19, 2013.

-Member, International Advisory Committee for 3rd International Conference on Production and Industrial Engineering, NIT Jalandhar, March 29-31, 2013.

-Member, International Advisory Committee for International Conference on Sustainable Manufacturing and Operations Management (ISOM-2013), University of Mauritius, June 26-28, 2013.

-Member, Programme Committee for International Conference on Recent Trends in Mechanical Engineering (RTME2013), Dubai, UAE, May 18-19, 2013.

-Member, Core team for “Champions for Societal Manufacturing (Visionary Leaders for Manufacturing”, a post graduate programme for experienced managers, jointly organized by IIM Kashipur and IIT Roorkee.

-Nominated for Training of Trainers (ToT) Program for designing the course on Materials Management and Quality Assurance for Capacity Building Training Programme in joint collaboration with IIT Kanpur and IMI Kolkata for Ministry of Power, GOI and Power Finance Cooperation.