Spotlight
Faculty Profiles
Student Homepages
Facilities
IITR Home
Forms
Time Table
R. Jayaganthan
R. Jayaganthan Professor rjayafmt[at]iitr.ac.in 01332-285869
Areas of Interest
  • Nano Manufacturing , Development of Bulk Nanostructured Materials for Structural Applications
  • Functional Nanomaterials, Structure-Property Correlations in Piezoelectric Nanostructured Thin films
  • Ultrafine grained Materials, Fatigue & Fracture Studies of Light Metals & Alloys
  • Corrosion Engineering, Degradation Behaviour of Bulk and Nanocrystalline Coatings
Professional Background
FromToDesignationOrganisation
2014-onwardsProfessorIIT Roorkee
20092014Associate ProfessorIIT Roorkee
20062009Assistant ProfessorIIT Roorkee
20042005LecturerIIT Roorkee
Honors and Awards
AwardInstituteYear
Alexander Von Humbodlt FellowshipAVH Foundation, Germany1998
Educational Details
DegreeSubjectUniversityYear
M.TechMetallurgyNIT Surathkal1992
Ph.DMaterials EnggIndian Institute of Science Bangalore1998
Visits to outside institutions
Institute VisitedPurpose of VisitDate
Max Planck Institute for Metals Research, Stuttgart, GermanyPost-doctoral Research Work1998-2000
Dept of Mechanical Engg, National University of Singapore, SingaporePost Doctoral Research Work2001-2004
GKSS Research Centre and Clausthal University of Technology, Clausthal-Zellerfeld, GermanyCollaborative Research work 2011
Refereed Journal Papers

1. Rahman A., Jayaganthan R., 2017, Study of CoFe2O4/NiFe2O4 nanocomposite ferrite film, Volume- 33, Issue- 11, 810  To  815, DOI- 10.1080/02670844.2017.1294812, EID- 2-s2.0-85014543735

2. Verma R., Srinivasan A., Jayaganthan R., Nath S.K., Goel S., 2017, Studies on tensile behaviour and microstructural evolution of UFG Mg-4Zn-4Gd alloy processed through hot rolling, Volume- 704, Issue- , 412  To  426, DOI- 10.1016/j.msea.2017.08.032, EID- 2-s2.0-85027547513

3. Yogesha K.K., Joshi A., Kumar N., Jayaganthan R., 2017, Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy, Volume- 32, Issue- 12, 1336  To  1344, DOI- 10.1080/10426914.2016.1244845, EID- 2-s2.0-85001946065

4. Fuloria D., Kumar N., Jayaganthan R., Jha S.K., Srivastava D., 2017, An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-4, Volume- 129, Issue- , 217  To  233, DOI- 10.1016/j.matchar.2017.04.038, EID- 2-s2.0-85019125243

5. Ranjan P., kumar L.S., Suematsu H., Chakravarthy S.R., Jayaganthan R., Sarathi R., 2017, Thermodynamic analysis of ZnO nanoparticle formation by wire explosion process and characterization, Volume- 43, Issue- 9, 6709  To  6720, DOI- 10.1016/j.ceramint.2017.02.069, EID- 2-s2.0-85013667252

6. Yogesha K.K., Joshi A., Jayaganthan R., 2017, Fatigue Behavior of Ultrafine-Grained 5052 Al Alloy Processed Through Different Rolling Methods, Volume- 26, Issue- 6, 2826  To  2836, DOI- 10.1007/s11665-017-2705-8, EID- 2-s2.0-85018411647

7. Rahman A., Jayaganthan R., 2017, Synthesis, Characterization and Photocatalytic Studies of La, Dy-doped ZnO nanoparticles, Volume- 70, Issue- 4, 1063  To  1074, DOI- 10.1007/s12666-016-0897-5, EID- 2-s2.0-84969850295

8. Joshi A., Yogesha K.K., Jayaganthan R., 2017, Influence of cryorolling and followed by annealing on high cycle fatigue behavior of ultrafine grained Al 2014 alloy, Volume- 127, Issue- , 253  To  271, DOI- 10.1016/j.matchar.2017.02.003, EID- 2-s2.0-85015621866

9. Fuloria D., Kumar N., Jayaganthan R., Jha S.K., Srivastava D., 2017, Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures, Volume- 127, Issue- , 296  To  310, DOI- 10.1016/j.matchar.2017.02.020, EID- 2-s2.0-85015383045

10. Bhardwaj V., Chowdhury R., Jayaganthan R., 2017, Adhesion strength and nanomechanical characterization of ZnO thin films, Volume- 32, Issue- 8, 1432  To  1443, DOI- 10.1557/jmr.2017.85, EID- 2-s2.0-85017597927

11. KUMAR N., JAYAGANTHAN R., BROKMEIER H.-G., 2017, Effect of deformation temperature on precipitation, microstructural evolution, mechanical and corrosion behavior of 6082 Al alloy, Volume- 27, Issue- 3, 475  To  492, DOI- 10.1016/S1003-6326(17)60055-4, EID- 2-s2.0-85017395004

12. Santhosh Kumar L., Chakravarthi S.R., Sarathi R., Jayaganthan R., 2017, Thermodynamic modeling and characterizations of Al nanoparticles produced by electrical wire explosion process, Volume- 32, Issue- 4, 897  To  909, DOI- 10.1557/jmr.2016.507, EID- 2-s2.0-85009999736

13. Vendra S.S.L., Goel S., Kumar N., Jayaganthan R., 2017, A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature, Volume- 686, Issue- , 82  To  92, DOI- 10.1016/j.msea.2017.01.035, EID- 2-s2.0-85009343102

14. Kumar N., Goel S., Jayaganthan R., Brokmeier H.-G., 2017, Effect of grain boundary misorientaton, deformation temperature and AlFeMnSi-phase on fatigue life of 6082 Al alloy, Volume- 124, Issue- , 229  To  240, DOI- 10.1016/j.matchar.2017.01.002, EID- 2-s2.0-85009152877

15. Balakrishnan V., Roshan P., Goel S., Jayaganthan R., Singh I.V., 2017, Experimental and XFEM Simulation of Tensile and Fracture Behavior of Al 6061 Alloy Processed by Severe Plastic Deformation, Volume- 6, Issue- 1, 55  To  72, DOI- 10.1007/s13632-016-0332-7, EID- 2-s2.0-85010657724

16. Sahoo A., Gautam R., Vinu R., Jayaganthan R., Sarathi R., 2017, Understanding the physico-chemical and surface discharge properties of epoxy silicon carbide nanocomposites, Volume- , Issue- ,   To  , DOI- 10.1002/pc.24341, EID- 2-s2.0-85016641680

17. Singh D., Jayaganthan R., Nageswara Rao P., Kumar A., Venketeswarlu D., 2017, Effect of initial grain size on microstructure and mechanical behavior of cryorolled AA 5083, Volume- 4, Issue- 8, 7609  To  7617, DOI- 10.1016/j.matpr.2017.07.094, EID- 2-s2.0-85032296459

18. Bhardwaj V., Chowdhury R., Jayaganthan R., 2016, Nanomechanical and microstructural characterization of sputter deposited ZnO thin films, Volume- 389, Issue- , 1023  To  1032, DOI- 10.1016/j.apsusc.2016.08.028, EID- 2-s2.0-84981507131

19. Joshi A., Yogesha K.K., Kumar N., Jayaganthan R., 2016, Influence of Annealing on Microstructural Evolution, Precipitation Sequence, and Fracture Toughness of Cryorolled Al–Cu–Si Alloy, Volume- 5, Issue- 6, 540  To  556, DOI- 10.1007/s13632-016-0313-x, EID- 2-s2.0-84996565932

20. Rahman A., Jayaganthan R., 2016, Study of Nanostructured CeO2 Coatings on Superalloy, Volume- 32, Issue- 10, 771  To  778, DOI- 10.1080/02670844.2016.1148381, EID- 2-s2.0-84978529055

21. Prakash R., Jayaganthan R., Kaur D., 2016, Structural, corrosion and mechanical properties of sputtered deposited chromium tungsten nitride (Cr1-xWxN) nanocomposite thin films, Volume- 7, Issue- 9, 723  To  729, DOI- 10.5185/amlett.2016.6362, EID- 2-s2.0-84982311353

22. Goel S., Kumar N., Fuloria D., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2016, Evaluating Fracture Toughness of Rolled Zircaloy-2 at Different Temperatures Using XFEM, Volume- 25, Issue- 9, 4046  To  4058, DOI- 10.1007/s11665-016-2241-y, EID- 2-s2.0-84979285115

23. Fuloria D., Kumar N., Goel S., Jayaganthan R., Jha S., Srivastava D., 2016, Tensile properties and microstructural evolution of Zircaloy-4 processed through rolling at different temperatures, Volume- 103, Issue- , 40  To  51, DOI- 10.1016/j.matdes.2016.04.052, EID- 2-s2.0-84964507738

24. Joshi A., Kumar N., Yogesha K.K., Jayaganthan R., Nath S.K., 2016, Mechanical Properties and Microstructural Evolution in Al 2014 Alloy Processed Through Multidirectional Cryoforging, Volume- 25, Issue- 7, 3031  To  3045, DOI- 10.1007/s11665-016-2126-0, EID- 2-s2.0-84976334445

25. Mohan K., Suresh J.A., Ramu P., Jayaganthan R., 2016, Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment, Volume- 25, Issue- 6, 2185  To  2194, DOI- 10.1007/s11665-016-2052-1, EID- 2-s2.0-84964270634

26. Yogesha K.K., Kumar N., Joshi A., Jayaganthan R., Nath S.K., 2016, A Comparative Study on Tensile and Fracture Behavior of Al–Mg Alloy Processed Through Cryorolling and Cryo Groove Rolling, Volume- 5, Issue- 3, 251  To  263, DOI- 10.1007/s13632-016-0282-0, EID- 2-s2.0-84970046712

27. Nayak S., Bhushan B., Jayaganthan R., Gopinath P., Agarwal R.D., Lahiri D., 2016, Strengthening of Mg based alloy through grain refinement for orthopaedic application, Volume- 59, Issue- , 57  To  70, DOI- 10.1016/j.jmbbm.2015.12.010, EID- 2-s2.0-84952670877

28. Sowjanya M., Pamu D., Chowdharuy R., Jayaganthan R., 2016, Effects of CeO2dopant on structural and optical properties of ZnO thin films prepared by rf sputtering, Volume- 22, Issue- 4, 896  To  900, DOI- 10.1166/asl.2016.6982, EID- 2-s2.0-84985897175

29. Rahman A., Jayaganthan R., 2016, Study of nanostructured Co and Al co-doped ZnO films fabricated by electroless technique, Volume- 32, Issue- 5, 372  To  377, DOI- 10.1179/1743294415Y.0000000079, EID- 2-s2.0-84964412205

30. Shukla V.N., Jayaganthan R., Tewari V.K., 2016, Degradation behaviour and microstructural characterisation of HVOF-sprayed Cr3C2-NiCr cermet coatings in molten salt environment, Volume- 53, Issue- 1, 15  To  27, DOI- 10.1504/IJMPT.2016.076364, EID- 2-s2.0-84969751453

31. Chauhan V., Dubey P., Verma S., Jayaganthan R., Chandra R., 2015, Dry Sliding and Abrasive Wear Behavior of Nanostructure Zr–W–N Coating, Volume- 68, Issue- 5, 799  To  807, DOI- 10.1007/s12666-015-0513-0, EID- 2-s2.0-84941947649

32. Kumar N., Goel S., Jayaganthan R., Brokmeier H.-G., 2015, Effect of Solution Treatment on Mechanical and Corrosion Behaviors of 6082-T6 Al Alloy, Volume- 4, Issue- 5, 411  To  422, DOI- 10.1007/s13632-015-0219-z, EID- 2-s2.0-84943225177

33. Rao P.N., Singh D., Brokmeier H.-G., Jayaganthan R., 2015, Effect of ageing on tensile behavior of ultrafine grained Al 6061 alloy, Volume- 641, Issue- , 391  To  401, DOI- 10.1016/j.msea.2015.06.036, EID- 2-s2.0-84934311790

34. Rana N., Mahapatra M.M., Jayaganthan R., Prakash S., 2015, High-Temperature Oxidation and Hot Corrosion Studies on NiCrAlY Coatings Deposited by Flame-Spray Technique, Volume- 24, Issue- 5, 769  To  777, DOI- 10.1007/s11666-015-0237-z, EID- 2-s2.0-84929946861

35. Hussain M., Nageswara Rao P., Jayaganthan R., 2015, Development of Ultrafine-Grained Al–Mg–Si Alloy Through SPD Processing, Volume- 4, Issue- 3, 219  To  228, DOI- 10.1007/s13632-015-0205-5, EID- 2-s2.0-84930939271

36. Trivedi P., Patel A.K., Maurya R., Jayaganthan R., Balani K., 2015, Nanomechanical Characterization and Protein Adsorption of Cold-Rolled Zirconium Alloy, Volume- 67, Issue- 4, 726  To  732, DOI- 10.1007/s11837-015-1324-9, EID- 2-s2.0-84939466356

37. Singh S., Manoj Kumar R., Kuntal K.K., Gupta P., Das S., Jayaganthan R., Roy P., Lahiri D., 2015, Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application, Volume- 67, Issue- 4, 702  To  712, DOI- 10.1007/s11837-015-1364-1, EID- 2-s2.0-84939472061

38. Shukla V.N., Jayaganthan R., Tewari V.K., 2015, Degradation Behavior of HVOF-Sprayed Cr3C2-25%NiCr Cermet Coatings Exposed to High Temperature Environment, Volume- 2, Issue- 42830, 1805  To  1813, DOI- 10.1016/j.matpr.2015.07.048, EID- 2-s2.0-84947298244

39. Kumar N., Rao P.N., Jayaganthan R., Brokmeier H.-G., 2015, Effect of cryorolling and annealing on recovery, recrystallisation, grain growth and their influence on mechanical and corrosion behaviour of 6082 Al alloy, Volume- 165, Issue- , 177  To  187, DOI- 10.1016/j.matchemphys.2015.09.014, EID- 2-s2.0-84943239019

40. Rahman A., Charoo M.S., Jayaganthan R., 2015, Structural, optical and photocatalytic properties of zinc aluminate spinel nanoparticles, Volume- 30, Issue- 3, 168  To  176, DOI- 10.1179/1753555714Y.0000000211, EID- 2-s2.0-84920051753

41. Kamal S., Sharma K.V., Jayaganthan R., Prakash S., 2015, Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment, Volume- 30, Issue- 18, 2829  To  2843, DOI- 10.1557/jmr.2015.264, EID- 2-s2.0-84944096585

42. Sarma J.V.N., Rahman A., Jayaganthan R., Chowdhury R., Haranath D., 2015, Al-doped ZnO Nanostructured Thin Films: Density Functional Theory and Experiment, Volume- 14, Issue- 4,   To  , DOI- 10.1142/S0219581X15500155, EID- 2-s2.0-84938556143

43. Goel S., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2015, Texture evolution and ultrafine grain formation in cross-cryo-rolled zircaloy-2, Volume- 28, Issue- 7, 837  To  846, DOI- 10.1007/s40195-015-0267-z, EID- 2-s2.0-84933520694

44. Trivedi P., Goel S., Das S., Jayaganthan R., Lahiri D., Roy P., 2015, Biocompatibility of ultrafine grained zircaloy-2 produced by cryorolling for medical applications, Volume- 46, Issue- , 309  To  315, DOI- 10.1016/j.msec.2014.10.056, EID- 2-s2.0-84908374399

45. Fuloria D., Goel S., Jayaganthan R., Srivastava D., Dey G.K., Saibaba N., 2015, Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature, Volume- 25, Issue- 7, 2221  To  2229, DOI- 10.1016/S1003-6326(15)63835-3, EID- 2-s2.0-84938702169

46. Rana N., Mahapatra M.M., Jayaganthan R., Prakash S., 2014, Deposition of nanocrystalline coatings by modified LVOF thermal spray method, Volume- 615, Issue- , 779  To  783, DOI- 10.1016/j.jallcom.2014.07.038, EID- 2-s2.0-84905001907

47. Singh D., Nageswara Rao P., Jayaganthan R., 2014, High cyclic fatigue behaviour of ultrafine grained Al 5083 alloy, Volume- 30, Issue- 14, 1835  To  1842, DOI- 10.1179/1743284713Y.0000000496, EID- 2-s2.0-84987786653

48. Fuloria D., Nageswararao P., Jayaganthan R., Jha S., Srivastava D., 2014, An investigation of deformed microstructure and mechanical properties of Zircaloy-4 processed through multiaxial forging, Volume- , Issue- ,   To  , DOI- 10.1016/j.matchemphys.2015.09.025, EID- 2-s2.0-84955613368

49. Rahman A., Jayaganthan R., Sharma J.V.N., 2014, Study of multilayer ZnO/Al doped ZnO nanostructured thin films, Volume- 30, Issue- 10, 709  To  715, DOI- 10.1179/1743294414Y.0000000316, EID- 2-s2.0-84907801745

50. Rao P.N., Viswanadh B., Jayaganthan R., 2014, Effect of cryorolling and warm rolling on precipitation evolution in Al 6061 alloy, Volume- 606, Issue- , 1  To  10, DOI- 10.1016/j.msea.2014.03.031, EID- 2-s2.0-84897934471

51. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling, Volume- 603, Issue- , 23  To  29, DOI- 10.1016/j.msea.2014.02.025, EID- 2-s2.0-84903367110

52. Trivedi P., Gupta P., Srivastava S., Jayaganthan R., Chandra R., Roy P., 2014, Characterization and in vitro biocompatibility study of Ti-Si-N nanocomposite coatings developed by using physical vapor deposition, Volume- 293, Issue- , 143  To  150, DOI- 10.1016/j.apsusc.2013.12.119, EID- 2-s2.0-84895062552

53. Rana N., Jayaganthan R., Prakash S., 2014, Stepwise depletion of coating elements as a result of hot corrosion of NiCrAlY coatings, Volume- 23, Issue- 2, 643  To  650, DOI- 10.1007/s11665-013-0774-x, EID- 2-s2.0-84893816346

54. Shah H.N., Jayaganthan R., 2014, Synthesis and micro-structural characterization of craln coatings by reactive magnetron sputtering, Volume- 12, Issue- , 421  To  430, DOI- 10.1007/978-81-322-1656-8_38, EID- 2-s2.0-84950308966

55. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2014, Graphyne-based single electron transistor: Ab initio analysis, Volume- 9, Issue- 3,   To  , DOI- 10.1142/S1793292014500325, EID- 2-s2.0-84902366502

56. Nageswara rao P., Singh D., Jayaganthan R., 2014, Effect of post cryorolling treatments on microstructural and mechanical behaviour of ultrafine grained Al-Mg-Si alloy, Volume- 30, Issue- 10, 998  To  1005, DOI- 10.1016/j.jmst.2014.03.009, EID- 2-s2.0-84908509040

57. Sarma J.V.N., Chowdhury R., Jayaganthan R., Scarpa F., 2014, Atomistic studies on tensile mechanics of bn nanotubes in the presence of defects, Volume- 13, Issue- 1,   To  , DOI- 10.1142/S0219581X14500057, EID- 2-s2.0-84898898821

58. Singh V.P., Sil A., Jayaganthan R., 2014, Evaluation of dry sliding and slurry erosion behaviour of plasma sprayed nanostructured Cr2O3-3TiO2 coatings, Volume- 8, Issue- 3, 131  To  138, DOI- 10.1179/1751584X13Y.0000000054, EID- 2-s2.0-84905259619

59. Rana N., Jayaganthan R., Prakash S., 2014, Stepwise oxidation mechanism of HVOF sprayed NiCrAlY coatings in air, Volume- 67, Issue- 3, 393  To  400, DOI- 10.1007/s12666-013-0362-7, EID- 2-s2.0-84901019129

60. Rao P.N., Kaurwar A., Singh D., Jayaganthan R., 2014, Enhancement in strength and ductility of Al-Mg-Si alloy by cryorolling followed by warm rolling, Volume- 75, Issue- , 123  To  128, DOI- 10.1016/j.proeng.2013.11.027, EID- 2-s2.0-84906736281

61. Rana N., Shukla V.N., Jayaganthan R., Prakash S., 2014, Degradation studies of micro and nanocrystalline nicraly coatings for high temperature corrosion protection, Volume- 75, Issue- , 118  To  122, DOI- 10.1016/j.proeng.2013.11.025, EID- 2-s2.0-84906735982

62. Rahman A., Jayaganthan R., Chandra R., 2014, Study of structural and optical properties of Zn1-xAl xO nanoparticles, Volume- 18, Issue- 1, 15  To  21, DOI- 10.1016/j.mssp.2013.09.024, EID- 2-s2.0-84887473567

63. Rao P.N., Singh D., Jayaganthan R., 2014, Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature, Volume- 56, Issue- , 97  To  104, DOI- 10.1016/j.matdes.2013.10.045, EID- 2-s2.0-84888367328

64. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2014, The influence of various sputtering parameters on structural, wettability and optical properties of Zr2ON2 thin films, Volume- 181, Issue- 1, 16  To  23, DOI- 10.1016/j.mseb.2013.11.003, EID- 2-s2.0-84890285079

65. Kumar V., Singh I.V., Mishra B.K., Jayaganthan R., 2014, Improved fracture toughness of cryorolled and room temperature rolled 6082 al alloys, Volume- 27, Issue- 2, 359  To  367, DOI- 10.1007/s40195-014-0057-z, EID- 2-s2.0-84901506702

66. Shukla V.N., Rana N., Jayaganthan R., Tewari V.K., 2014, Degradation studies of wire arc sprayed fecrbsimn alloy coating in molten salt environment, Volume- 75, Issue- , 113  To  117, DOI- 10.1016/j.proeng.2013.11.025, EID- 2-s2.0-84906734516

67. Rana N., Jayaganthan R., Prakash S., 2014, Microstructural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOF process, Volume- 260, Issue- , 28  To  33, DOI- 10.1016/j.surfcoat.2014.06.073, EID- 2-s2.0-84918834348

68. Hussain M., Rao P.N., Singh D., Jayaganthan R., Singh S., 2014, Comparative study of microstructure and mechanical properties of al 6063 alloy processed by multi axial forging at 77k and cryorolling, Volume- 75, Issue- , 129  To  133, DOI- 10.1016/j.proeng.2013.11.028, EID- 2-s2.0-84906777409

69. Goel S., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Mechanical and microstructural characterizations of ultrafine grained Zircaloy-2 produced by room temperature rolling, Volume- 55, Issue- , 612  To  618, DOI- 10.1016/j.matdes.2013.09.039, EID- 2-s2.0-84887203290

70. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Development of Ultrafine Grained Zircaloy-2 by Room Temperature Cross Rolling, Volume- 24, Issue- 2, 609  To  617, DOI- 10.1007/s11665-014-1287-y, EID- 2-s2.0-84925533592

71. Goel S., Gaurav K., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Experimental evaluation of mechanical properties and fracture-fatigue simulation of cryo- and room-temperature-rolled zircaloy-2, Volume- 9, Issue- 2, 120  To  135, DOI- 10.1504/IJMMP.2014.066573, EID- 2-s2.0-84920084349

72. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Jha S.K., Saibaba N., 2014, Texture and Mechanical Behavior of Zircaloy-2 Rolled at Different Temperatures, Volume- 24, Issue- 2, 618  To  625, DOI- 10.1007/s11665-014-1315-y, EID- 2-s2.0-84925493304

73. Rahman A., Jayaganthan R., Jain R.K., Pramod J.P., Chandra R., Ambardar R., 2013, Processing and characterisation of nanostructured Al doped ZnO antireflection films, Volume- 28, Issue- 6, 357  To  363, DOI- 10.1179/1753555713Y.0000000079, EID- 2-s2.0-84885401164

74. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Environmental degradation behavior of high-velocity arc sprayed fecrbmnsi alloy coatings in a coal fired boiler, Volume- 26, Issue- 5, 602  To  612, DOI- 10.1007/s40195-013-0199-4, EID- 2-s2.0-84891751665

75. Das P., Jayaganthan R., Singh I.V., 2013, Experimental finding of initiation fracture toughness and fem simulation of fracture behaviour of UFG 7075 al alloy, Volume- 4, Issue- 9, 668  To  681, DOI- 10.5185/amlett.2012.12490, EID- 2-s2.0-84883684486

76. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2013, Molecular dynamics investigation of the thermomechanical behavior of monolayer GaN, Volume- 113, Issue- 24,   To  , DOI- 10.1063/1.4812328, EID- 2-s2.0-84879863565

77. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Degradation behavior of nanostructured coatings deposited by high-velocity Arc Spraying Process in an Actual Environment of a Coal-Fired Boiler, Volume- 65, Issue- 6, 784  To  791, DOI- 10.1007/s11837-013-0612-5, EID- 2-s2.0-84878147462

78. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2013, Effect of power variation on wettability and optical properties of co-sputtered titanium and zirconium oxynitride films, Volume- 36, Issue- 3, 403  To  409, DOI- 10.1007/s12034-013-0486-8, EID- 2-s2.0-84878858079

79. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2013, Mechanical behavior of gallium nitride nanosheets using molecular dynamics, Volume- 75, Issue- , 29  To  34, DOI- 10.1016/j.commatsci.2013.03.035, EID- 2-s2.0-84876564122

80. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2013, Degradation behaviour of sputtered Co-Al coatings on superalloy, Volume- 138, Issue- 1, 49  To  62, DOI- 10.1016/j.matchemphys.2012.11.004, EID- 2-s2.0-84873738151

81. Rahman A., Jayaganthan R., Chandra R., Ambardar R., 2013, High temperature degradation behavior of sputtered nanostructured Co-Al coatings on superalloy, Volume- 265, Issue- , 10  To  23, DOI- 10.1016/j.apsusc.2012.10.002, EID- 2-s2.0-84871932105

82. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Microstructural characterization and cyclic oxidation behavior of HVOF-sprayed Cr3C2-NiCr coating on Boiler steel at elevated temperature, Volume- 736, Issue- , 289  To  300, DOI- 10.4028/www.scientific.net/MSF.736.289, EID- 2-s2.0-84873044636

83. Nageswara Rao P., Singh D., Jayaganthan R., 2013, Effect of annealing on microstructure and mechanical properties of Al 6061 alloy processed by cryorolling, Volume- 29, Issue- 1, 76  To  82, DOI- 10.1179/1743284712Y.0000000041, EID- 2-s2.0-84873814766

84. Singh D., Nageswara Rao P., Jayaganthan R., 2013, Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealing, Volume- 20, Issue- 8, 759  To  769, DOI- 10.1007/s12613-013-0794-4, EID- 2-s2.0-84901290495

85. Singh D., Rao P.N., Jayaganthan R., 2013, Effect of deformation temperature on mechanical properties of ultrafine grained Al-Mg alloys processed by rolling, Volume- 50, Issue- , 646  To  655, DOI- 10.1016/j.matdes.2013.02.068, EID- 2-s2.0-84876303073

86. Rahman A., Jayaganthan R., Jain R.K., Chawla A.K., Chandra R., Ambardar R., 2013, Study of nanostructured Al doped ZnO films, Volume- 29, Issue- 6, 440  To  446, DOI- 10.1179/1743294413Y.0000000140, EID- 2-s2.0-84880746072

87. Singh D., Nageswararao P., Jayaganthan R., 2012, Microstructural studies of Al 5083 alloy deformed through cryorolling, Volume- 585, Issue- , 376  To  380, DOI- 10.4028/www.scientific.net/AMR.585.376, EID- 2-s2.0-84870600508

88. Rana N., Jayaganthan R., Prakash S., 2012, Microstructural features and oxidation behaviour of NiCrAlY coatings obtained by HVOF process, Volume- 585, Issue- , 507  To  511, DOI- 10.4028/www.scientific.net/AMR.585.507, EID- 2-s2.0-84870582394

89. Shukla V.N., Jayaganthan R., Tewari V.K., 2012, Hot corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on 310S stainless steel in an actual environment of a coal fired boiler, Volume- 585, Issue- , 483  To  487, DOI- 10.4028/www.scientific.net/AMR.585.483, EID- 2-s2.0-84870589980

90. Mahesh R.A., Rao G., Jayaganthan R., Prakash S., 2012, Hot corrosion behaviour of HVOF sprayed NiCrAlY-0·4 wt-%CeO2 coatings on superalloys in aggressive environment at 900°C, Volume- 5, Issue- 2, 142  To  149, DOI- , EID- 2-s2.0-84876826234

91. Das P., Singh I.V., Jayaganthan R., 2012, Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM, Volume- 44, Issue- 42798, 252  To  276, DOI- 10.1504/IJMPT.2012.050192, EID- 2-s2.0-84868518492

92. Kralia L., Singh I.V., Pathak P.M., Jayaganthan R., 2012, An experimental study of mechanical and fatigue behavior of cryorolled Al 6063 alloy, Volume- 7, Issue- 2, 124  To  127, DOI- , EID- 2-s2.0-84866688406

93. Shah H.N., Jayaganthan R., 2012, Influence of Al contents on the microstructure, mechanical, and wear properties of magnetron sputtered CrAlN coatings, Volume- 21, Issue- 9, 2002  To  2009, DOI- 10.1007/s11665-011-0112-0, EID- 2-s2.0-84869493445

94. Rahman A., Jayaganthan R., Jain R.K., Chandra R., Ambardar R., 2012, Study of high temperature oxidation kinetics of Co-Al coating on superalloy, Volume- 28, Issue- 8, 620  To  626, DOI- 10.1179/1743294412Y.0000000041, EID- 2-s2.0-84867167166

95. Nageswara rao P., Jayaganthan R., 2012, Effects of warm rolling and ageing after cryogenic rolling on mechanical properties and microstructure of Al 6061 alloy, Volume- 39, Issue- , 226  To  233, DOI- 10.1016/j.matdes.2012.02.010, EID- 2-s2.0-84858719637

96. Walia R., Pivin J.C., Chawla A.K., Jayaganthan R., Gautam Y.K., Chandra R., 2012, A comprehensive study of structural and magnetic properties of sputter deposited nickel-silica thin films, Volume- 177, Issue- 13, 1073  To  1079, DOI- 10.1016/j.mseb.2012.05.004, EID- 2-s2.0-84863982960

97. Das P., Singh I.V., Jayaganthan R., 2012, An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy, Volume- 21, Issue- 7, 1167  To  1181, DOI- 10.1007/s11665-011-0062-6, EID- 2-s2.0-84865318607

98. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2012, Structural, Wettability and Optical Investigation of Titanium Oxynitride Coatings: Effect of Various Sputtering Parameters, Volume- 28, Issue- 6, 512  To  523, DOI- 10.1016/S1005-0302(12)60091-7, EID- 2-s2.0-84863859488

99. Walia R., Pivin J.C., Jain R., Jayaganthan R., Pippel E., Singh F., Chandra R., 2012, Effect of swift heavy ion irradiation on sputter deposited SiO 2/Co/Pt/SiO 2 multilayers, Volume- 280, Issue- , 123  To  130, DOI- 10.1016/j.nimb.2012.03.011, EID- 2-s2.0-84860305793

100. Singh V.P., Sil A., Jayaganthan R., 2012, Tribological behaviour of nanostructured Al 2O 3 coatings, Volume- 28, Issue- 4, 277  To  284, DOI- 10.1179/1743294411Y.0000000076, EID- 2-s2.0-84862221957

101. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2012, Hot corrosion of nanostructured Cr/Co-Al coatings, Volume- 28, Issue- 4, 285  To  293, DOI- 10.1179/1743294411Y.0000000039, EID- 2-s2.0-84862228511

102. Rahman A., Chawla V., Jayaganthan R., Chandra R., Tewari V.K., Ambardar R., 2012, High temperature oxidation behaviour of Cr/Co-Al coated superalloy, Volume- 28, Issue- 4, 249  To  256, DOI- 10.1179/1743294411Y.0000000030, EID- 2-s2.0-84862177796

103. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., Mohamed S.B., 2012, Microstructural characterisations and high temperature oxidation studies of nanostructured Co-Al coatings deposited on superalloy, Volume- 65, Issue- 2, 205  To  217, DOI- 10.1007/s12666-011-0115-4, EID- 2-s2.0-84863833388

104. Singh V.P., Sil A., Jayaganthan R., 2012, Wear of plasma sprayed conventional and nanostructured Al 2O 3 and Cr 2O 3, based coatings, Volume- 65, Issue- 1, 1  To  12, DOI- 10.1007/s12666-011-0070-0, EID- 2-s2.0-84859780407

105. Bisht A., Albe K., Jayaganthan R., 2012, Effect of porosity on mechanical behaviour of nanocrystalline metals, Volume- , Issue- ,   To  , DOI- 10.1109/ICEmElec.2012.6636247, EID- 2-s2.0-84890872965

106. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2011, Characterization of bi-phased Zr2ON2-ZrO2 coatings deposited by RF magnetron sputtering, Volume- 520, Issue- 5, 1589  To  1596, DOI- 10.1016/j.tsf.2011.09.010, EID- 2-s2.0-82755189362

107. Thakur L., Arora N., Jayaganthan R., Sood R., 2011, An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings, Volume- 258, Issue- 3, 1225  To  1234, DOI- 10.1016/j.apsusc.2011.09.079, EID- 2-s2.0-80455160196

108. Panigrahi S.K., Jayaganthan R., 2011, Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy, Volume- 509, Issue- 40, 9609  To  9616, DOI- 10.1016/j.jallcom.2011.07.028, EID- 2-s2.0-80052318421

109. Singh V.P., Sil A., Jayaganthan R., 2011, Tribological behavior of plasma sprayed Cr2O3-3%TiO2 coatings, Volume- 272, Issue- 1, 149  To  158, DOI- 10.1016/j.wear.2011.08.004, EID- 2-s2.0-80052715691

110. Panigrahi S.K., Jayaganthan R., 2011, Effect of annealing on thermal stability, precipitate evolution, and mechanical properties of cryorolled Al 7075 alloy, Volume- 42, Issue- 10, 3208  To  3217, DOI- 10.1007/s11661-011-0723-y, EID- 2-s2.0-80053643832

111. Rahman A., Jayaganthan R., Chandra R., Ambardar R., 2011, Microstructural characterization and cyclic hot corrosion behaviour of sputtered Co-Al nanostructured coatings on superalloy, Volume- 76, Issue- 42798, 307  To  330, DOI- 10.1007/s11085-011-9257-3, EID- 2-s2.0-80052711190

112. Das P., Jayaganthan R., Chowdhury T., Singh I.V., 2011, Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy, Volume- 528, Issue- 24, 7124  To  7132, DOI- 10.1016/j.msea.2011.05.021, EID- 2-s2.0-79960618925

113. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2011, Structural and optical investigation of sputter deposited hydrophobic chromium oxynitride films, Volume- 519, Issue- 22, 7686  To  7693, DOI- 10.1016/j.tsf.2011.05.056, EID- 2-s2.0-80052135277

114. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2011, Optical and hydrophobic properties of co-sputtered chromium and titanium oxynitride films, Volume- 257, Issue- 21, 8755  To  8761, DOI- 10.1016/j.apsusc.2011.03.012, EID- 2-s2.0-79960198471

115. Kamal S., Jayaganthan R., Prakash S., 2011, Hot corrosion studies of detonation-gun-sprayed NiCrAlY + 0.4 wt.% CeO 2 coated superalloys in molten salt environment, Volume- 20, Issue- 6, 1068  To  1077, DOI- 10.1007/s11665-010-9728-8, EID- 2-s2.0-80052558524

116. Panigrahi S.K., Jayaganthan R., 2011, Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling, Volume- 32, Issue- 6, 3150  To  3160, DOI- 10.1016/j.matdes.2011.02.051, EID- 2-s2.0-79953164803

117. Mahesh R.A., Jayaganthan R., Prakash S., 2011, High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys, Volume- 27, Issue- 5, 332  To  339, DOI- 10.1179/174329409X409486, EID- 2-s2.0-79960230997

118. Rahman A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2011, Cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings on superalloy, Volume- 27, Issue- 5, 393  To  401, DOI- 10.1179/026708408X339064, EID- 2-s2.0-79960282791

119. Das P., Jayaganthan R., Chowdhury T., Singh I.V., 2011, Improvement of fracture toughness (K1c) of 7075 Al alloy by cryorolling process, Volume- 683, Issue- , 81  To  94, DOI- 10.4028/www.scientific.net/MSF.683.81, EID- 2-s2.0-79957709057

120. Shah H.N., Jayaganthan R., Pandey A.C., 2011, Nanoindentation study of magnetron-sputtered CrN and CrSiN coatings, Volume- 32, Issue- 5, 2628  To  2634, DOI- 10.1016/j.matdes.2011.01.031, EID- 2-s2.0-79952193444

121. Shah H.N., Jayaganthan R., Kaur D., 2011, Influence of reactive gas and temperature on structural properties of magnetron sputtered CrSiN coatings, Volume- 257, Issue- 13, 5535  To  5543, DOI- 10.1016/j.apsusc.2011.01.030, EID- 2-s2.0-79952535482

122. Panigrahi S.K., Jayaganthan R., 2011, Development of ultrafine-grained Al 6063 alloy by cryorolling with the optimized initial heat treatment conditions, Volume- 32, Issue- 4, 2172  To  2180, DOI- 10.1016/j.matdes.2010.11.027, EID- 2-s2.0-79251604960

123. Jindal R., Jayaganthan R., Singh I.V., Conradt R., 2011, Synthesis and characterization of clinopyroxene based glasses and glass-ceramics along diopside (CaMgSi2O6)-jadeite (NaAlSi2O6) join, Volume- 37, Issue- 3, 741  To  748, DOI- 10.1016/j.ceramint.2010.09.049, EID- 2-s2.0-79951508626

124. Panigrahi S.K., Jayaganthan R., 2011, Influence of solutes and second phase particles on work hardening behavior of Al 6063 alloy processed by cryorolling, Volume- 528, Issue- 42924, 3147  To  3160, DOI- 10.1016/j.msea.2011.01.010, EID- 2-s2.0-79751532880

125. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2011, Study of cyclic hot corrosion of nanostructured Cr/Co-Al coatings on superalloy, Volume- 126, Issue- 42737, 253  To  261, DOI- 10.1016/j.matchemphys.2010.11.030, EID- 2-s2.0-78751633669

126. Das P., Jayaganthan R., Singh I.V., 2011, Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy, Volume- 32, Issue- 3, 1298  To  1305, DOI- 10.1016/j.matdes.2010.09.026, EID- 2-s2.0-78649873608

127. Walia R., Pivin J.C., Chawla A.K., Jayaganthan R., Chandra R., 2011, Structural and magnetic properties of sputter deposited cobalt-silica nanocomposite thin films, Volume- 509, Issue- 6, L103  To  L108, DOI- 10.1016/j.jallcom.2010.11.151, EID- 2-s2.0-78651359055

128. Singh V.P., Sil A., Jayaganthan R., 2011, A study on sliding and erosive wear behaviour of atmospheric plasma sprayed conventional and nanostructured alumina coatings, Volume- 32, Issue- 2, 584  To  591, DOI- 10.1016/j.matdes.2010.08.019, EID- 2-s2.0-77958484219

129. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2010, Evaluation of high temperature oxidation behaviour of nanostructured Cr/Co-Al coatings, Volume- 74, Issue- 42861, 341  To  358, DOI- 10.1007/s11085-010-9217-3, EID- 2-s2.0-78650171976

130. Shah H.N., Jayaganthan R., Kaur D., 2010, Effect of sputtering pressure and temperature on DC magnetron sputtered CrN films, Volume- 26, Issue- 8, 629  To  637, DOI- 10.1179/174329409X389326, EID- 2-s2.0-78149427010

131. Shah H.N., Jayaganthan R., Kaur D., 2010, Synthesis and microstructural characterisation of CrSiN thin films deposited on Si(100) substrate, Volume- 26, Issue- 8, 596  To  601, DOI- 10.1179/026708410X12459349720097, EID- 2-s2.0-78149432158

132. Chawla V., Chandra R., Jayaganthan R., 2010, Effect of phase transformation on structural, electrical and hydrophobic properties of nanocomposite Ti1-xAlxN films, Volume- 507, Issue- 2, L47  To  L53, DOI- 10.1016/j.jallcom.2010.08.017, EID- 2-s2.0-77957141360

133. Panigrahi S.K., Jayaganthan R., 2010, Effect of annealing on precipitation, microstructural stability, and mechanical properties of cryorolled Al 6063 alloy, Volume- 45, Issue- 20, 5624  To  5636, DOI- 10.1007/s10853-010-4627-9, EID- 2-s2.0-77956478717

134. Panigrahi S.K., Jayaganthan R., 2010, A study on the combined treatment of cryorolling, short-annealing, and aging for the development of ultrafine-grained Al 6063 alloy with enhanced strength and ductility, Volume- 41, Issue- 10, 2675  To  2690, DOI- 10.1007/s11661-010-0328-x, EID- 2-s2.0-78149282022

135. Chawla V., Jayaganthan R., Chandra R., 2010, Influence of Sputtering Pressure on the Structure and Mechanical Properties of Nanocomposite Ti-Si-N Thin Films, Volume- 26, Issue- 8, 673  To  678, DOI- 10.1016/S1005-0302(10)60105-3, EID- 2-s2.0-77957037470

136. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2010, Structural, optical and hydrophobic properties of sputter deposited zirconium oxynitride films, Volume- 172, Issue- 3, 259  To  266, DOI- 10.1016/j.mseb.2010.05.027, EID- 2-s2.0-77955431071

137. Shah H.N., Jayaganthan R., Kaur D., Chandra R., 2010, Influence of sputtering parameters and nitrogen on the microstructure of chromium nitride thin films deposited on steel substrate by direct-current reactive magnetron sputtering, Volume- 518, Issue- 20, 5762  To  5768, DOI- 10.1016/j.tsf.2010.05.095, EID- 2-s2.0-77955426185

138. Mahesh R.A., Jayaganthan R., Prakash S., 2010, Evaluation of hot corrosion behaviour of HVOF sprayed Ni-5Al and NiCrAl coatings in coal fired boiler environment, Volume- 26, Issue- 6, 413  To  421, DOI- 10.1179/174329409X451164, EID- 2-s2.0-77955679171

139. Chawla V., Jayaganthan R., Chandra R., 2010, Microstructural and mechanical properties of sputter deposited TiN/SiNx multilayer thin films, Volume- 122, Issue- 42769, 424  To  430, DOI- 10.1016/j.matchemphys.2010.03.018, EID- 2-s2.0-77953136299

140. Kamal S., Jayaganthan R., Prakash S., 2010, Hot corrosion behaviour of D-gun sprayed NiCoCrAlYTa coated superalloys at 900°C in molten salt environment, Volume- 26, Issue- 6, 453  To  462, DOI- 10.1179/026708410X12459349720132, EID- 2-s2.0-77955696259

141. Kamal S., Jayaganthan R., Prakash S., 2010, Mechanical and microstructural characteristics of detonation gun sprayed NiCrAlY + 0.4 wt% CeO2 coatings on superalloys, Volume- 122, Issue- 1, 262  To  268, DOI- 10.1016/j.matchemphys.2010.02.046, EID- 2-s2.0-77950517592

142. Panigrahi S.K., Jayaganthan R., Pancholi V., Gupta M., 2010, A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy, Volume- 122, Issue- 1, 188  To  193, DOI- 10.1016/j.matchemphys.2010.02.032, EID- 2-s2.0-77950519550

143. Kamal S., Jayaganthan R., Prakash S., 2010, High temperature cyclic oxidation and hot corrosion behaviours of superalloys at 900°C, Volume- 33, Issue- 3, 299  To  306, DOI- 10.1007/s12034-010-0046-4, EID- 2-s2.0-77957576159

144. Shah H.N., Jayaganthan R., Kaur D., 2010, Influence of silicon content on the microstructure and hardness of CrN coatings deposited by reactive magnetron sputtering, Volume- 121, Issue- 3, 567  To  571, DOI- 10.1016/j.matchemphys.2010.02.024, EID- 2-s2.0-77950298100

145. Jayaganthan R., Brokmeier H.-G., Schwebke B., Panigrahi S.K., 2010, Microstructure and texture evolution in cryorolled Al 7075 alloy, Volume- 496, Issue- 42737, 183  To  188, DOI- 10.1016/j.jallcom.2010.02.111, EID- 2-s2.0-77950864918

146. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2010, Effect of ambient gas on structural and optical properties of titanium oxynitride films, Volume- 256, Issue- 13, 4129  To  4135, DOI- 10.1016/j.apsusc.2010.01.096, EID- 2-s2.0-77950518080

147. Mahesh R.A., Rao G., Jayaganthan R., Prakash S., 2010, Hot corrosion behaviour of HVOF sprayed NiCrAlY-0·4 wt-%CeO 2 coatings on superalloys in aggressive environment at 900°C, Volume- 45, Issue- 2, 142  To  149, DOI- 10.1179/174327808X303473, EID- 2-s2.0-77952196773

148. Shah H.N., Chawla V., Jayaganthan R., Kaur D., 2010, Microstructural characterizations and hardness evaluation of d.c. reactive magnetron sputtered CrN thin films on stainless steel substrate, Volume- 33, Issue- 2, 103  To  110, DOI- 10.1007/s12034-010-0014-z, EID- 2-s2.0-77953813347

149. Rao P.N., Panigrahi S.K., Jayaganthan R., 2010, Effect of annealing and aging treatment on mechanical properties of ultrafine grained Al 6061 alloy, Volume- 26, Issue- 3, 371  To  374, DOI- 10.1179/174328409X443227, EID- 2-s2.0-77749304181

150. Mahesh R.A., Jayaganthan R., Prakash S., 2010, A study on the oxidation behavior of HVOF sprayed NiCrAlY-0.4 wt.% CeO2 coatings on superalloys at elevated temperature, Volume- 119, Issue- 3, 449  To  457, DOI- 10.1016/j.matchemphys.2009.09.024, EID- 2-s2.0-72049120661

151. Chawla V., Jayaganthan R., Chandra R., 2010, A study of structural and mechanical properties of sputter deposited nanocomposite Ti-Si-N thin films, Volume- 204, Issue- 42988, 1582  To  1589, DOI- 10.1016/j.surfcoat.2009.10.001, EID- 2-s2.0-71049150021

152. Panigrahi S.K., Devanand D., Jayaganthan R., 2010, Effect of ageing on strength and ductility of ultrafine grained Al 6061 alloy, Volume- 633-634, Issue- , 303  To  309, DOI- 10.4028/www.scientific.net/MSF.633-634.303, EID- 2-s2.0-75849144292

153. Panigrahi S.K., Jayaganthan R., Pancholi V., 2009, Effect of plastic deformation conditions on microstructural characteristics and mechanical properties of Al 6063 alloy, Volume- 30, Issue- 6, 1894  To  1901, DOI- 10.1016/j.matdes.2008.09.022, EID- 2-s2.0-63049129231

154. Bhatnagar G., Jayaganthan R., Raman B., 2009, Wavelet analysis of surface morphologies of magnetron sputtered Al-Cu thin films, Volume- 7, Issue- 1, 59  To  74, DOI- 10.1142/S0219691309002775, EID- 2-s2.0-65449177606

155. Kamal S., Jayaganthan R., Prakash S., 2009, Mechanical and microstructural characterisations of nicrcoalyta coatings on superalloys deposited by detonation gun technique, Volume- 25, Issue- 4, 303  To  312, DOI- 10.1179/026708409X364939, EID- 2-s2.0-67149104090

156. Kamal S., Jayaganthan R., Prakash S., 2009, Characterisation of detonation gun sprayed Cr3C 2-25NiCr coatings on Ni and Fe based superalloys, Volume- 25, Issue- 4, 287  To  294, DOI- 10.1179/174329408X298247, EID- 2-s2.0-67149093548

157. Mahesh R.A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2009, High temperature cyclic oxidation behavior of magnetron sputtered Ni-Al thin films on Ni- and Fe-based superalloys, Volume- 114, Issue- 42769, 629  To  635, DOI- 10.1016/j.matchemphys.2008.10.037, EID- 2-s2.0-58849134811

158. Chawla V., Jayaganthan R., Chawla A.K., Chandra R., 2009, Microstructural characterizations of magnetron sputtered Ti films on glass substrate, Volume- 209, Issue- 7, 3444  To  3451, DOI- 10.1016/j.jmatprotec.2008.08.004, EID- 2-s2.0-62949154747

159. Mahesh R.A., Jayaganthan R., Prakash S., 2009, Microstructural characterization and hardness evaluation of HVOF sprayed Ni-5Al coatings on Ni- and Fe-based superalloys, Volume- 209, Issue- 7, 3501  To  3510, DOI- 10.1016/j.jmatprotec.2008.08.009, EID- 2-s2.0-62949114299

160. Chawla V., Jayaganthan R., Chandra R., 2009, Microstructural characteristics and mechanical properties of magnetron sputtered nanocrystalline tin films on glass substrate, Volume- 32, Issue- 2, 117  To  123, DOI- 10.1007/s12034-009-0018-8, EID- 2-s2.0-67049158184

161. Kamal S., Jayaganthan R., Prakash S., 2009, High temperature oxidation studies of detonation-gun-sprayed Cr3C2-NiCr coating on Fe- and Ni-based superalloys in air under cyclic condition at 900 °C, Volume- 472, Issue- 42737, 378  To  389, DOI- 10.1016/j.jallcom.2008.04.087, EID- 2-s2.0-61349183924

162. Rahman A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2009, High temperature oxidation behavior of nanostructured Ni-Al coatings on superalloy, Volume- 472, Issue- 42737, 478  To  483, DOI- 10.1016/j.jallcom.2008.04.091, EID- 2-s2.0-61349171420

163. Chawla V., Jayaganthan R., Chandra R., 2009, Analysis of thermal stress in magnetron sputtered TiN coating by finite element method, Volume- 114, Issue- 1, 290  To  294, DOI- 10.1016/j.matchemphys.2008.09.023, EID- 2-s2.0-58149456507

164. Panigrahi S.K., Jayaganthan R., 2009, Development of ultrafine grained Al-Mg-Si alloy with enhanced strength and ductility, Volume- 470, Issue- 42737, 285  To  288, DOI- 10.1016/j.jallcom.2008.02.028, EID- 2-s2.0-59249094537

165. Mahesh R.A., Jayaganthan R., Prakash S., 2009, Microstructural characteristics and mechanical properties of HVOF sprayed NiCrAl coating on superalloys, Volume- 468, Issue- 42737, 392  To  405, DOI- 10.1016/j.jallcom.2008.01.025, EID- 2-s2.0-58049192849

166. Kamal S., Jayaganthan R., Prakash S., 2009, Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2-25%NiCr coatings on nickel- and iron-based superalloys, Volume- 203, Issue- 8, 1004  To  1013, DOI- 10.1016/j.surfcoat.2008.09.031, EID- 2-s2.0-57549097827

167. Chawla V., Jayaganthan R., Chawla A.K., Chandra R., 2008, Morphological study of magnetron sputtered Ti thin films on silicon substrate, Volume- 111, Issue- 42769, 414  To  418, DOI- 10.1016/j.matchemphys.2008.04.048, EID- 2-s2.0-47949133686

168. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900 °C, Volume- 111, Issue- 42769, 524  To  533, DOI- 10.1016/j.matchemphys.2008.05.006, EID- 2-s2.0-47949100368

169. Panigrahi S.K., Jayaganthan R., 2008, Effect of rolling temperature on microstructure and mechanical properties of 6063 Al alloy, Volume- 492, Issue- 42737, 300  To  305, DOI- 10.1016/j.msea.2008.03.029, EID- 2-s2.0-47249093751

170. Kamal S., Jayaganthan R., Prakash S., Kumar S., 2008, Hot corrosion behavior of detonation gun sprayed Cr3C2-NiCr coatings on Ni and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 °C, Volume- 463, Issue- 42737, 358  To  372, DOI- 10.1016/j.jallcom.2007.09.019, EID- 2-s2.0-48949118678

171. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Characterisation of HVOF sprayed NiCrAlY-0-4 wt-%CeO2 coatings on superalloys, Volume- 24, Issue- 5, 366  To  373, DOI- 10.1179/174329408X326362, EID- 2-s2.0-51749092819

172. Chawla V., Jayaganthan R., Chandra R., 2008, Structural characterizations of magnetron sputtered nanocrystalline TiN thin films, Volume- 59, Issue- 8, 1015  To  1020, DOI- 10.1016/j.matchar.2007.08.017, EID- 2-s2.0-44649202788

173. Mahesh R.A., Jayaganthan R., Prakash S., 2008, A study on hot corrosion behaviour of Ni-5Al coatings on Ni- and Fe-based superalloys in an aggressive environment at 900 °C, Volume- 460, Issue- 42737, 220  To  231, DOI- 10.1016/j.jallcom.2007.05.092, EID- 2-s2.0-44449163339

174. Panigrahi S.K., Jayaganthan R., Chawla V., 2008, Effect of cryorolling on microstructure of Al-Mg-Si alloy, Volume- 62, Issue- 17-18, 2626  To  2629, DOI- 10.1016/j.matlet.2008.01.003, EID- 2-s2.0-43049152795

175. Choudhury S., Jayaganthan R., 2008, Monte Carlo simulation of grain growth in 2D and 3D bicrystals with mobile and immobile impurities, Volume- 109, Issue- 42769, 325  To  333, DOI- 10.1016/j.matchemphys.2007.11.037, EID- 2-s2.0-41249091993

176. Panigrahi S.K., Jayaganthan R., 2008, A study on the mechanical properties of cryorolled Al-Mg-Si alloy, Volume- 480, Issue- 42737, 299  To  305, DOI- 10.1016/j.msea.2007.07.024, EID- 2-s2.0-41149146708

177. Chawla V., Jayaganthan R., Chandra R., 2008, Finite element analysis of thermal stress in magnetron sputtered Ti coating, Volume- 200, Issue- 42738, 205  To  211, DOI- 10.1016/j.jmatprotec.2007.09.036, EID- 2-s2.0-39849103434

178. Panigrahi S.K., Devanand D., Jayaganthan R., 2008, A comparative study on mechanical properties of ultrafine-grained Al 6061 and Al 6063 alloys processed by cryorolling, Volume- 61, Issue- 42769, 159  To  163, DOI- , EID- 2-s2.0-58049112196

179. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Oxidation behavior of HVOF sprayed Ni-5Al coatings deposited on Ni- and Fe-based superalloys under cyclic condition, Volume- 475, Issue- 42737, 327  To  335, DOI- 10.1016/j.msea.2007.04.108, EID- 2-s2.0-38749089070

180. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Oxidation behaviour of selected Ni- And Fe- based superalloys in air at 900°C under cyclic conditions, Volume- 61, Issue- 1, 45  To  49, DOI- , EID- 2-s2.0-49649101113

181. Jayaganthan R., Panigrahi S.K., 2008, Effect of cryorolling strain on precipitation kinetics of Al 7075 alloy, Volume- 584-586 PART 2, Issue- , 911  To  916, DOI- , EID- 2-s2.0-56349106564

182. Panigrahi S.K., Jayaganthan R., 2008, A comparative study on mechanical properties of Al 7075 alloy processed by rolling at cryogenic temperature and room temperature, Volume- 584-586 PART 2, Issue- , 734  To  740, DOI- , EID- 2-s2.0-56349128378

183. Anuwar M., Jayaganthan R., Tewari V.K., Arivazhagan N., 2007, A study on the hot corrosion behavior of Ti-6Al-4V alloy, Volume- 61, Issue- 7, 1483  To  1488, DOI- 10.1016/j.matlet.2006.07.058, EID- 2-s2.0-33847065902

184. Kumar A., Jayaganthan R., Chandra R., Chawla V., Tay A.A.O., 2006, Nanoindentation study of sputtered Al-Cu thin films for interconnect applications, Volume- , Issue- , 560  To  564, DOI- 10.1109/EPTC.2006.342774, EID- 2-s2.0-50249139173

185. Sindhu T.K., Chakravarthi S.R., Jayaganthan R., Sarathi R., 2006, Studies on generation and characterization of nano aluminium nitride using wire explosion technique, Volume- 36, Issue- 1, 53  To  58, DOI- 10.1080/15533170500471714, EID- 2-s2.0-33645309602

186. Jayaganthan R., Mohankumar K., Sekhar V.N., Tay A.A.O., Kripesh V., 2006, Fractal analysis of intermetallic compounds in Sn-Ag, Sn-Ag-Bi, and Sn-Ag-Cu diffusion couples, Volume- 60, Issue- 8, 1089  To  1094, DOI- 10.1016/j.matlet.2005.10.090, EID- 2-s2.0-30644480342

187. Huang C.M., Joanne C.L., Patnaik B.S.V., Jayaganthan R., 2006, Monte Carlo simulation of grain growth in polycrystalline materials, Volume- 252, Issue- 11, 3997  To  4002, DOI- 10.1016/j.apsusc.2005.09.051, EID- 2-s2.0-33645222272

188. Jayabalan J., Jayaganthan R., Tay A.A.O., Leong O.B., 2005, Energetics of copper nanowires, Volume- 4, Issue- 4, 717  To  723, DOI- 10.1142/S0219581X05003231, EID- 2-s2.0-28844476222

189. Mohankumar K., Shyong S.K., Jayaganthan R., Tay A.A.O., Kripesh V., 2005, A study on microstructural and mechanical properties of nanocrystalline nickel, Volume- 4, Issue- 4, 615  To  622, DOI- 10.1142/S0219581X05003358, EID- 2-s2.0-28844431581

190. Jayaganthan R., Mohankumar K., Tay A.A.O., 2005, Nanoindentation study of nanocrystalline nickel, Volume- 4, Issue- 2, 197  To  205, DOI- 10.1142/S0219581X05003048, EID- 2-s2.0-21144436080

191. Jayaganthan R., Vora R.H., 2005, Experimental investigation and Monte Carlo Simulation of glass transition in polymer nanocomposites, Volume- 23, Issue- , 339  To  342, DOI- , EID- 2-s2.0-12344336229

192. Jayaganthan R., Chow G.M., 2005, Thermodynamic modeling of surface segregation in Au-Ti nanoparticles, Volume- 23, Issue- , 259  To  262, DOI- , EID- 2-s2.0-12344324508

193. Jayaganthan R., Chow G.M., 2005, Monte Carlo simulation of surface segregation in nanoparticles, Volume- 23, Issue- , 203  To  206, DOI- , EID- 2-s2.0-12344280894

194. Vora R.H., Jayaganthan R., Wang Z., Thin E.T., Bang T.K., 2005, Synthesis, fabrication, characterization, properties and thermo-oxldatlve stability study of poly(ether imlde)/MMT clay nanocomposites, Volume- 23, Issue- , 379  To  382, DOI- , EID- 2-s2.0-12344251595

195. Jayaganthan R., Mohankumar K., Tay A.A.O., Kripesh V., 2004, Fractal analysis of Sn-Ag, Sn-Ag-Cu, Sn-Ag-Bi interfacial morphology in flipchip packaging applications, Volume- , Issue- , 620  To  624, DOI- , EID- 2-s2.0-28444473508

196. Sekhar V.N., Srinivasarao V., Jayaganthan R., Mohankumar K., Tay A.A.O., 2004, A study on the mechanical behavior of the sputtered nickel thin Films for UBM applications, Volume- , Issue- , 610  To  614, DOI- , EID- 2-s2.0-28444491481

197. Srinivasarao V., Jayaganthan R., Sekhar V.N., Mohankumar K., Tay A.A.O., Kripesh V., 2004, Nanoindentation study of the sputtered Cu thin films for interconnect applications, Volume- , Issue- , 343  To  347, DOI- , EID- 2-s2.0-28444435224

198. Sarathi R., AnilKumar C.R., Venkataseshaiah C., Jayaganthan R., 2004, Influence of homo- and heterocharges on the growth dynamics of electrical trees, Volume- 58, Issue- 19, 2386  To  2392, DOI- 10.1016/j.matlet.2004.02.013, EID- 2-s2.0-2942516523

199. Jayaganthan R., Chow G.M., 2002, Thermodynamics of surface compositional segregation in Ni-Co nanoparticles, Volume- 95, Issue- 2, 116  To  123, DOI- 10.1016/S0921-5107(02)00221-0, EID- 2-s2.0-0036683015

200. Piriyakumar A.L., Levi P., Jayaganthan R., Sarathi R., 2000, A parallel processing technique for electrical tree growth in solid insulating materials using cellular automata, Volume- , Issue- , 228  To  231, DOI- 10.1109/PCEE.2000.873634, EID- 2-s2.0-84951740704

201. Jayaganthan R., Hajra J.P., 1998, Thermodynamics and phase equilibria in the Al-In-Sb system, Volume- 29, Issue- 2, 611  To  616, DOI- , EID- 2-s2.0-0032000546

202. Jayaganthan R., Hajra J.P., 1998, Activities of Al in the Al-Ga-In-Sb system in the temperature range of 1073-1273K, Volume- 39, Issue- 1, 1  To  5, DOI- 10.1016/S1359-6462(98)00136-5, EID- 2-s2.0-0032485959

203. Jayaganthan R., Hajra J.P., 1997, Applicability of a dilute quaternary model in interpreting the thermodynamic properties of the Fe-Ni-Ta-N system, Volume- 37, Issue- 10, 1539  To  1544, DOI- 10.1016/S1359-6462(97)00286-8, EID- 2-s2.0-0031277310

204. Hajra J.P., Jayaganthan R., Divakar M., 1997, Representation of thermodynamic properties of quaternary systems using interaction parameters, Volume- 68, Issue- 9, 375  To  382, DOI- 10.1002/srin.199700569, EID- 2-s2.0-0031220342

205. Jayaganthan R., Hajra J.P., 1996, Thermodynamics and phase equilibria in the Al-Ga system, Volume- 38, Issue- 42737, 96  To  102, DOI- , EID- 2-s2.0-0030103128