Spotlight
Faculty Profiles
Student Homepages
Facilities
IITR Home
Forms
Prospective Faculty
Time Table
ANISH KARMAKAR
ANISH KARMAKAR Assistant Professor anishfmt[at]iitr.ac.in 7602645469
Areas of Interest
  • Advanced Thermomechanical Processing of Steels and Titanium Alloys, Damage Evaluation of Metals and Alloys
  • Design and Tailoring of Structure in Steels, Fatigue Behaviour of Titanium Alloys
  • Electron Microscopy, Precipitation kinetics, Crystallographic texture
Professional Background
FromToDesignationOrganisation
20172018National Post Doctoral FellowIndian Institute of Science, Bangalore
20182019Assistant ProfessorNational Institute of Technology, Warangal
2019PresentAssistant ProfessorIndian Institute of Technology, Roorkee
Honors and Awards
AwardInstituteYear
INSPIRE FACULTY AWARDDepartment of Science and Technology (DST)2018
Educational Details
DegreeSubjectUniversityYear
Bachelor of EngineeringMetallurgy and Materials EngineeringBengal Engineering & Science University, Shibpur2009
Master of ScienceMetallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur2012
Doctor of PhilosophyMetallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur2017
Sponsored Research Projects
TopicFunding AgencyYear
Development of rare earth added steels for application of different temperature domains Department of Science and Technology2018
Memberships
  • Indian Institute of Metals (IIM), Life Member-No.57298
  • Association for Iron and Steel Technology (AIST), Member-No.185546
Teaching Engagements
TitleCourse CodeClass NameSemester
X Ray Diffraction and Electron MicroscopyMM-4014th Year, B. TechAutumn
X Ray Diffraction and Electron Microscopy LaboratoryMM-4044th Year, B. TechAutumn
Introduction to MaterialsMM-51111st Year M TechAutumn
Visits to outside institutions
Institute VisitedPurpose of VisitDate
University of British Columbia, Vancouver, CanadaInternational Conference (PTM 2015)June, 2015
University of Utah, Salt Lake City, USAInternational Conference (MS&T 2016)Oct. 2016
Refereed Journal Papers

• A. Karmakar, M. Ghosh, D. Chakrabarti, “Cold-rolling and inter-critical annealing of low-carbon steel: effect of initial microstructure and heating-Rate”, Materials Science & Engineering A, Vol. 564 (2013), pp. 389–399.

A. Karmakar, A. Karani, S. Patra, D. Chakrabarti, “Development of bimodal ferrite-grain structures in low-carbon steel using rapid intercritical annealing”, Metallurgical and Materials Transactions A, Vol. 44A (2013), pp. 2041-2052.

A. Karmakar, D. Chakrabarti, “Comparison between conventional annealing and rapid-transformation annealing of low-carbon steel’, International Journal of Metallurgical Engineering, Vol. 2 (2) (2013), pp. 137-141.

A. Karmakar, R. D. K. Misra, S. Neogy, D. Chakrabarti, “Development of ultrafine-grained dual-phase steels: mechanism of grain refinement during intercritical deformation”, Metallurgical and Materials Transactions A, Vol. A 44 (9) (2013), pp. 4106-4118.

A. Karmakar, S. Sivaprasad, S. K. Nath, R. D. K. Misra, D. Chakrabarti “Comparison between different processing schedules for the development of ultrafine-grained dual-phase steel”, Metallurgical and Materials Transactions A, Vol. 45 (5) (2013), pp. 2466-2479.

A. Karmakar, R. D. K. Misra, S. Neogy, D. Chakrabarti “ Development of ultra-fine grained dual-phase steels: mechanism of grain refinement during inter-critical deformation”, Materials Science Forum, Vol. 783 (2014), pp. 674-678.

A. Karmakar, S. Sivaprasad, S. Kundu, D. Chakrabarti, “Tensile behavior of ferrite-carbide and ferrite-martensite steels with different ferrite grain structures”, Metallurgical and Materials Transactions A, Vol. 45 (4) (2013), pp. 1659-1664.

A. Karmakar, S. Kundu, S. Roy, S. Neogy, D. Srivastava, D Chakrabarti, “Effect of microalloying elements on austenite grain growth in Nb-Ti and Nb-V steels”, Materials Science and Technology, Vol. 30 (6) (2014), pp. 653-664.

• S. Roy, A. Karmakar, S. Mukherjee, S. Kundu, D. Srivastava, D. Chakrabarti “Effect of starting microstructure on austenite grain sizes developed after reheating of HSLA steel”, Materials Science and Technology, Vol. 30 (10) (2014), pp. 1142-1153.

A. Karmakar, M. Mandal, A. Mandal, MB Sk, S. Mukherjee, D. Chakrabarti “Effect of starting microstructure on the grain refinement in cold-rolled low-carbon steel during annealing at two different heating rates”, Metallurgical and Materials Transactions A, Vol. 47 (1) (2016), pp. 268-281.

• C. Halder, A. Karmakar, Sk. Md. Hasan, D. Chakrabarti, M. Pietrzyk, N. Chakraborti “Effect of carbon distribution during the microstructure evolution of dual phase steels studied using cellular automata, genetic algorithms and experimental strategies”, Metallurgical and Materials Transactions A, Vol. 47 (12) (2016), pp. 5890-5906.

A. Karmakar, P. Sahu, S. Neogy, D. Chakrabarti, R. Mitra, S. Mukherjee, S. Kundu “ Effect of cooling rate and chemical composition on microstructure and properties of naturally cooled vanadium-microalloyed steels”, Metallurgical and Materials Transactions A, Vol. 48 (4) (2017), pp. 1581-1595.

A. Karmakar, S. Biswas, S. Mukherjee, D. Chakrabarti, Vinod Kumar “ Effect of composition and thermo-mechanical processing schedule on the microstructure, precipitation and strengthening of Nb-microalloyed steel”, Materials Science & Engineering A, Vol. 690 (2017), pp. 158–169.

A. Karmakar, S. Mukherjee, S. Kundu, D. Srivastava, R. Mitra, D. Chakrabarti “Effect of composition and isothermal holding temperature on the precipitation hardening in Vanadium-microalloyed steels”, Materials Characterization, Vol. 132 (2017), pp. 31– 40.

A. Karmakar, M. Mandal, D. Chakrabarti “Development of different novel microstructures in low-carbon steel by thermomechanical processing and their properties”, IIM Metal News, Vol. 20 (7) (2017), pp. 12-19.

• A. Mandal, A. Karmakar, D. Chakrabarti, C. Davis “Effect of alloying and coiling temperature on the microstructure and bending performance of ultra-high-strength strip steel”, Metallurgical and Materials Transactions A, Vol. 49 (12) (2018), pp. 6359-6374.

• A Bhattacharya, A. Karmakar, A. Karani, M. Ghosh, D. Chakrabarti “Processing of ultrafine-grained steels by warm rolling and annealing”, Journal of Materials Engineering and Performance, Vol. 28 (2) (2019), pp. 753-768.

• R. Pradhan, A. Karmakar, M. Ghosh, D. Chakrabarti, S. Mukherjee "Effect of thermomechanical processing on microstructural evolution in precipitation strengthened ferrite steel", SN Applied Sciences, Vol. 1(7) (2019), pp. 663.