Spotlight
Faculty Profiles
Student Homepages
Facilities
IITR Home
Forms
Prospective Faculty
Time Table
Faculty Participation
Faculty Participation in Seminar/Symposia/Workshop (2017-18)
  • Dr. Anjan Sil attended Workshop on "Battery technologies and electric mobility" H & P Green, R & D Centre, HPCL Bangaluru 8-9 March 2018
  • Dr. Vivek Pancholi attended" Short Course in Film Appreciation" IIT Roorkee 25 February-1 March 2018
  • Dr. Anjan Sil Delivered the guest lecture on “Energy storage materials: their impact on society” CSIR-CBRI, Roorkee, Uttarakhand 28 February 2018
  • Dr. D Lahiri Invited talk on “Surface Modified Hip Implant for Sustained Drug Release”, 19th  International Symposium On Eco-materials Processing And Design, Jaipur, India 21-25 February 2018
  • Dr. B.V. Manoj Kumar "Surface and subsurface analysis of worn SiC-WC composites" Seoul, South Korea 23 February 2018
  • Dr. Nikhil Dhawan attended International Conference on “Recent Advances in Metallurgy for Sustainable Development (IC-RAMSD 2018) " MS University, Vadodara  1-3 February 2018
  • Dr. B. V. Manoj Kumar "Surface and subsurface studies of worn SiC-based composites for green transport engines systems" Japan-India YNU Symposium2017 Yokohama, Japan 13 - 14 December 2017
  • Dr. B. V. Manoj Kumar guest lectures on “Fundamentals, characterization and applications of CMC” in a course on “Advances in composite materials” Coimbatore Institute of Technology, Coimbatore, India 06-12 December 2017
  • Dr. Sourav Das attended an International Conference on Advances in Materials & Processing: Challenges & Opportunities” (AMPCO-2017) IIT Roorkee 30 November-02 December 2017
  • Dr. Indranil Lahiri attended an International Conference on Advances in Materials & Processing: Challenges & Opportunities” (AMPCO-2017) IIT Roorkee 30 November-02 December 2017
  • Dr. D. Lahiri Invited talk on “Evaluating the micron level phase distribution in composite structures using 2D modulus mapping”, Nanoyantrika Thiruvananthapuram, India 17-20 November 2017
  • Dr.  Sourav Das attended the Annual Technical Meeting " NMD-ATM 2017" 14-16 November 2017
  • Dr. Anjan Sil delivered the guest lecture on “Electrochemical characteristics of battery supercapacitor hybrid –some studies using biomaterial electrode” Helmholtz-Institute Ulm (HIU) Germany 17 October 2017
  • Dr. Anjan Sil delivered the guest lecture on “Electrochemical characteristics of cathode materials for lithium ion batteries –some highlights” Helmholtz-Institute Ulm (HIU) Germany 10 October 2017
  • Dr. Anjan Sil delivered the guest lecture on “An overview of lithium ion battery cathode materials –types, structures and properties” Helmholtz-Institute Ulm (HIU)   Germany 5 October 2017
  • Dr. Anjan Sil delivered invited talk in the "10th National Conference Solid State Chemistry and Allied Areas (ISCAS) " Delhi Technological University, Delhi 1–3 July 2017
  • Dr. Vivek Pancholi attended "6th Gleeble User Workshop India - GUWI’17" IIT Bombay 15 – 17 June 2017
  • Dr. S.R. Meka attended "International Conference on Recent Advances in Materials, Mechanical and Civil Engineering ICRAMMCE-2017" Hyderabad, India 1-2 June 2017
  • Dr.  B. V. Manoj Kumar Invited talk delivered on “Understanding tribology of ceramics and cermets in sliding wear contacts” 12th Pacific Rim Conference of Ceramic Societies (PACRIM12), Hawaii, USA 21-26 May 2017
  • Dr.  S.R. Meka "Heads of Max Planck Indian partner groups bi-annual-meeting 2017 " IISER Mohali, India 03-5 March 2017
Faculty Participation in Seminar/Symposia/Workshop (2012-16)
 
  • Dr. Anjan Sil, invited talk “Renewable energy sources and rechargeable battery – an introduction.” in QIP short term course on Relevance of Nanotechnology to Rechargeable battery technology, IIT Roorkee 18-22 July, 2016.

  • Dr. Anjan Sil, invited talk “Relevance of nanotechnology to rechargeable batteries” in QIP short term course on Relevance of Nanotechnology to Rechargeable battery technology” IIT Roorkee 18-22 July, 2016.

  • Dr. Indranil Lahiri, invited talk on Carbon nanostructures in Li-ion Battery, QIP short term course on Relevance of Nanotechnology to Rechargeable battery technology, IIT Roorkee 18-22 July, 2016.

  • Dr. Debrupa Lahiri, invited talk on “Drug Releasing Acetabular Cup Lining – A New Dimension in Total Hip Implant”, Tenth National Frontiers of Engineering Symposium, IIT Kanpur 23-25 june, 2016. 

  • Dr. Indranil Lahiri,  Invited talk on the topic of Carbon nanotube based anodes in Li-ion battery, Indo-US bilateral workshop on ``Recent Advances in Multiscale, Multiphysics Analysis of Energy Conversion in Li-ion Batteries``, IIT Bombay 17-19 June, 2016.

  • Dr. Debrupa Lahiri, invited talk on “Evaluation of Cell Adhesion Mechanism at Multiple Scale Lengths” in 8th Indo-German Frontiers ofEngineering Symposium  – a bilateral symposium between DST, India and Humboldt Foundation Germany, Potsdam, Germany, 19-22 May, 2016.

  • Dr. Anjan Sil, invited talk on “Cathode materials for lithium ion batteries – an overview.”  in the Workshop on “Lithium ion battery technology and mathematical modeling,” IIT Kharagpur, 16-18 May, 2016.

  • Dr. Vivek Pancholi, TEQIP special training course on Advanced Concept of Quality Inspection and its Application in Fatigue and Fracture MechanicsIIT Roorkee 18-23 April, 2016.

  • Dr. Vivek Pancholi,   Invited lecture in Advanced Materials Processing and Characterization - 2016”  NIT Patna 18-20 February, 2016.

  • Dr. S.K. Nath, Chaired a session in SIMMPRO-16, RDCIS, Ranchi, 12 Februay, 2016.

  • Dr. P.K Ghosh, Keynote lecture on Thermo mechanical simulation of stress induced transformation and HAZ characteristics of arc welded austenitic stainless steel session in SIMMPRO-16, RDCIS, Ranchi  10 February, 2016.

  • Dr. K. Suresh, Invited Lecture on "Microstructural investigations of severe plastically deformed materials" at the TEQIP workshop on High Resolution X-ray and electron diffraction,  IIT Kanpur  01-05 February, 2016.

  • Dr. G.P. Chaudhari, Co-Convener of Hands on Training cum Workshop On “Electron Microscopy-Why, How and What” IIC, IIT Roorkee 2016

  • Dr. G.P. Chaudhari, Resource person in a National workshop “X-ray powder diffraction, dynamic light scattering, scanning- and transmission electron microscopies (NXDST-)” Panjab University, Chandigarh 2016.

  • Dr. B. V. Manoj Kumar, Invited talk delivered on “Understanding tribological behavior of SiC ceramics: influence of sintering additives, sliding load and counterbody,” National Conference on “Tribology: Energy, Environment and Efficiency” AMPRI Bhopal, India  21-22 January, 2016.

  • Dr. N. Dhawan, Invited talk on “HPGR performance lab scale to plant operations”, International Conference on Mineral Processing Technology (MPT) Pune 05-07 January, 2016.

  • Dr. B. V. Manoj Kumar, Guest lectures on “Structural ceramic composites” in a course on “Advances in composite materials”, Coimbatore Institute of Technology, Coimbatore, India,  04-06 January, 2016.

  • Dr. D. Lahiri, Invited talk on the topic of "Hydroxyapatite Modified Mg Alloy for Orthopedic Application" CGCRI (CSIR Centre for Glass and Ceramic Research Institute), Kolkata, 30 December, 2015.

  • Dr. D. Lahiri, Invited talk on the topic of "Neural Scaffold with Anisotropic Electrical Conductivity for Directional Growth of Neurons" in the conference on "The Challenges in Product Development of Medical Implants and Device (CPDM)- 2015" IIEST Shibpur, 18-19 December 2015.

  • Dr. B. V. Manoj Kumar, Invited talk on “Erosion wear behavior of spark plasma sintered ZrB2-SiC composites” in  Workshop on “Ultra High Temperature Ceramics for Thermo-structural applications”, IISc Bangalore, India 14 December, 2015.

  • Dr. N. Dhawan, Presented a poster  on “Silicate rocks-A source for fertilizers”, India International Science Festival (IISF), IIT-Delhi, 4-8 December 2015.

  • Dr. Suhrit Mula, NMD-ATM 2015, Le Meridian, Coimbatore1 13-16 November, 2015.

  • Dr. Vivek PancholiInvited lecture in “Thermomechanical Processing & Microstructure” organized jointly by BARC and IIT Bombay with support from Mumbai chapters of IIM and MRSIIIT Bombay  6-7 October, 2015.

  • Dr. Debrupa Lahiri, invited talk on Nano-Scratch Based Technique: Novel Method for Quantifying Adhesion Strength at Sub-Micron Scale Nanoyantrika, Workshop on Nanomechanical Testing, Trivandrum, India,  20-22 September, 2015.

  • Dr. Vivek Pancholi, 12th International Conference on Superplasticity and Advanced Materials (ICSAM 2015) organized by the Japan Society for Research on Superplasticity (JSRS) and co-organized by the Light Metal Educational Foundation, Inc., Japan and Ibaraki University, Tokyo 7-11 September, 2015.

  • Dr. Manoj Kumar, invited talk on Wear of SiC ceramics, Department of Materials Science and EngineeringUniversity of Seoul, Korea,  05 September, 2015.

  • Dr. Manoj Kumar delivered invited talk: Does Small Amount of Sintering Additives Improve Wear Performance of SiC Ceramics? 11th Pacific Rim Conference of Ceramic Societies (PACRIM11),  03 September, 2015.

  • Dr. N. Dhawan, Workshop on “Emerging Technology in Iron Ore Processing”, Bhubaneswar, 27 June, 2015.

  • Dr. Indranil Lahiri, Nanostructure synthesis and applications, Short term course on “Nanotechnology: Basics and Applications in Chemical EngineeringIIT Roorkee, 22-26 June, 2015.

  • Dr. B. V. Manoj Kumar, Key Note Speaker in National Conference on “Futuristic Trends in Mechanical Engineering” (FTME 2015)Jaipur Engineering College & Research Centre, Jaipur, India 14-15 March, 2015.

  • Dr. Vivek Pancholi, Guest lecture - NRB Research Dissemination Workshop on “Friction Stir Processing of Aluminium Alloys and Composites”IIT Madras,5 March, 2015.

  • Dr. Debrupa Lahiri, Keynote Talk in International Conference on Emerging trends in  Manufacturing, Engines and Modelling, NMIMS, Dhule, Maharashtra, 27-28 February, 2015.

  • Dr. Indranil Lahiri, Invited Talk on “Nanotechnology and Its Applications” Tripura Inst. Tech., Agartala  22 February, 2015.

  • Dr. Debrupa Lahiri, Invited talk in Zwick Academia Day - India German Centre, Gurgaon 19-20 January, 2015.

  • Dr. Indranil Lahiri, Invited Talk on “Nanostructured Carbon in Field Emission and Energy Storage” BARC, Mumbai 23 December, 2014.

  • Dr. Debrupa Lahiri, Invited Talk in Molecualr Signalling: Recent Trends in Biomedical and Translational Research - ICMS: RTBTR‐2014., IIT Roorkee, India, 17-19 December, 2014. 

  • Dr.V.V. Dabhade, Indian Institute of MetalsNMD-ATM, Pune College of Engineering Pune, PUNE 12-15 November 2014.

  • Dr. B. V. Manoj Kumar, Invited speaker in the course on “Recent Advancements in composites” Coimbatore Institute of Technology, Coimbatore, India November 03-07, 2014.

  • Dr.Debrupa Lahiri, 52nd Annual Technical Meeting of Indian Institute of MetalsPune, India, 12-15 November 2014.

  • Dr. Debrupa Lahiri, International conference on Polymeric Biomaterials, Bioengineering and Biodiagnostics, IIT Delhi, India 27 – 30 October 2014.

  • Dr.G.P. Chaudhari, Materials Science & Technology 2014Pittsburgh, PA, USA,12 October 2014.

  • Dr. S.K. Nath, Chaired a session in “International Science Conference Venice, Italy 14-15 August, 2014.

  • Dr. Vivek Pancholi, Guest lecture - UGC NRC-M Symposium and Discussion meeting on Severe Plastic Deformation and bulk nano-structured materialsIISc Banglore, 12-14 May 2014.

  • Dr. Debrupa Lahiri, Invited Talk in Zwick Forum on Mechanical testing of Lightweight Materials Universidad Rey Juan Carlos,  Madrid, Spain,  Madrid, Spain9 April, 2014.

  • Dr. S.K. Nath, Key Note speech during International Conference on Advances in Manufacturing and Materials Engineering (AMME-2014)Department of Mechanical Engineering, National Institute of Technology Karnataka, Surathkal, 27-29 March, 2014.

  • Dr. R. Jayaganthan, TMS Annual MeetingSan Diego, USA16-20 February, 2014.

  • Dr. Debrupa Lahiri, TMS Annual MeetingSan Diego, USA16-20 February, 2014.

  • Dr. Indranil Lahiri, TMS Annual MeetingSan Diego, USA16-20 February, 2014.

  • Dr. P.K. Ghosh, International conference on IPRIIT BombayFebruary 2014.

  • Dr. Debrupa Lahiri, Zwick Roell Forum on ‘Latest Trends in Materials TestingIIT Kanpur27 January, 2014.

  • Dr. Vikram Dabhade, International Conference on Powder Metallurgy and Particulate MaterialsChennai, 23-25 January 2014.

  • Dr. G.P. Chaudhari, Surface Technology India, ASM International, Lecture: Corrosion behavior of ultrafine grained 316L stainless steel produced by severe plastic deformation, Pragati Maidan, New Delhi18 December, 2013.

  • Dr. Anjan Sil, 3rd National Conf. on Advanced Materials and Radiation Physics (AMRP-2013)SLIET, Longwal, Punjab 22-23 November, 2013.

  • Dr. Suhrit Mula,NMD-ATM 2013,  IIT-BHU, Varanasi12-15 November, 2013.

  • Dr. B. V. Manoj Kumar, NMD-AMD of IIM 2013IIT-BHU12-15 November,  2013.

  • Dr. P.K. Ghosh, Times Workshop University RankingDelhiNovember, 2013.

  • Dr. Debrupa Lahiri, Annual Technical Meeting, Indian Institute of MetalsIIT, BHU,11-14 November, 2013.

  • Dr. Indranil Lahiri, Annual Technical Meeting, Indian Institute of MetalsIIT, BHU11-14 November, 2013.

  • Dr. R. Jayaganthan, Annual Technical Meeting, Indian Institute of MetalsIIT, BHU11-14 November, 2013.

  • Dr. Vivek Pancholi, One day workshop on advances in  surface modification technologies: friction stir processing, IIT Roorkee3 November, 2013.

  • Dr. Satya Prakash, International conference AFTMME-2013, PTU, Jalandhar, 3-6 October, 2013.

  • Dr. P.K. Ghosh, National Workshop on Joining of Materials, NIT Silchar, 10-12 August, 2013.

  • P.K.Ghosh, 3rd International Conference on Thermomechanical Simulation and Processing of Steels, RDCIS, Ranchi11-14 December, 2012.

  • Anjan Sil, AMPCO 2012IIT Roorkee, 2-4 November, 2012.

  • Sadan Ghosh,  AMPCO 2012IIT Roorkee2-4 November, 2012.

  • Ujjwal Prakash, Thermomechanical Processing of Steel, Sheffield, U.K, 8-16 September, 2012.

  • Vijaya Agarwala, QIP Sponsored Workshop on Recent Advances in Nanomedicine, IIT Roorkee, 4-8 June, 2012.

Faculty Participation in Short term courses (2012-16)

  • Dr. Ujjwal Prakash, Humboldt revisit from May to to IEHK, RWTH Aachen University, Germany, July 2015.

  • Dr. Suhrit Mula, Advanced Aerospace Materials: Processing, Characterization and Applications, Quality Improvement Programme Centre, Indian Institute of Technology Roorkee, 1-5 June 2015.

  • Dr. Vikram Dabhade, Advanced Aerospace Materials: Processing, Characterization and ApplicationsContinuing Education Programme, IIT Roorkee1-5 June 2015.

  • Dr. B. V. Manoj Kumar, How to improve innovation and IP in HEIsIIT Roorkee03-07 February 2014.

  • Dr. R. Jayaganthan, Fatigue and Fracture of Advanced Materials, Continuing Education Centre, IIT Roorkee20-23 July, 2013.

  • Dr. R. Jayaganthan, Introduction to Modeling and Simulation, QIP ProgrammeIIT Roorkee9-13 Dec, 2013.

  • Dr. Anjan Sil, TEQIP Sponsored Short Term Course on Futuristic Materials, SBSSTC, Ferozepur, Punjab, 30 sep-04 Oct 2013.         

  • G.P.Chaudhury, QIP Sponsored Workshop on Advanced Techniques in Corrosion Testing and Protection of MaterialsIIT Roorkee18-22 Feb, 2013.

  • R. Jayaganthan, QIP Sponsored Workshop on Advanced Techniques in Corrosion Testing and Protection of Materials, IIT Roorkee18-22 Feb, 2013.

  • Satya Prakash, QIP Sponsored Workshop on Advanced Techniques in Corrosion Testing and Protection of MaterialsIIT Roorkee, 18-22, Feb, 2013.