Spotlight
Faculty Profiles
Labs
New Laboratories
IITR-Penn State Research Initiative
Ongoing Projects
Completed Projects
Student Section
Research Scholars Day 16th May, 2018
About Us
Sponsered Research

 

New Sponsored Research Projects  

Principal Investigator 

Name of the Project

Sponsoring Agency

Outlay (in  Lakh of Rupees)

A.K. Sharma

Microwave Joining of Metals

SRIC, IIT Roorkee

. 1.0 Lac 

B.K. Gandhi

Development of non-cobalt base cavitation resistant surface by laser cladding process.

BRNS

14.6 lac 
 
 

B.K. Gandhi 

D.K. Dwivedi

Development of non-cobalt base cavitation resistant surface by laser cladding process

BRNS, Mumbai

13.95

Satish C. Sharma

A Parametric Study of Performance of a Coriolis Mass Flow Rate Meter.

DST

19.8 

N. Arora 

D.K Dwivedi

Process Modelling of Twin Wire Welding System

DST, New Delhi

9.38 

P. M. Pathak

Design, Fabrication and Control of a Planer Cooperative Space Robot

SRIC, IIT Roorkee

1.0 Lac

V.K. Goel

Influence of Low Frequency Vibration on Activity Comfort while Traveling by Railway Vehicles.

SIDA, Stockholm

35.10 Lacs (received by KTH)

V.Huzur Saran

Effect of Low Frequency Vibration on Human Comfort.

SERC, D.S.T.

Rs. 43.93 lacs

D.K Dwivedi

Investigation on the Failure of Aluminium Wound  Distribution Transformers and Recommendation of Suitable Material for Manufacturing Distribution Transformer Windings  (R & D)

MOP, GOI

10.04 lacs

Continuing Sponsored Research Projects 

Principal Investigator/ Coordinator

Name of the Project

   Sponsoring Agency

Outlay (in lakh of  Rupees)    

D.K. Dwivedi

Development of Wear resistant Piston materials

CSIR, New Delhi

9.26

V.H. Saran

Collaboration in Research & Development of New Curriculam  in Sound and Vibration.

EU-Asia Link Program

Rs. 578

Pradeep Kumar

Development and Performance Studies of Evaporative Pattern Casting Process

DST

14.25

B.K. Mishra

Near Net Shape Manufacturing of Metal Matrix Composite through Investment Casting Process

MHRD

14.00

P.K. Sahoo

Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss

BRNS

31.54

P.K. Sahoo

Simulation of Pollutant Dispersion from a chimney Using CFD

DST

7.26

S.C. Solanki

Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed

DST

19.76

B.K. Gandhi

Cost-effective transportation of bulk solids through slurry pipelines

MHRD

14.00

Completed Sponsored Research Projects during 2002-2007

2006-07

Principal Investigator

Name of Project

Sponsoring Agency

Outlay (Amount

in Lakhs of Rs.)

Pramod Kumar Jain

Development of A Re-configurable Manufacturing System (RMS) framework using autonomous and Cooperative agent – based technology

MHRD

(R&D)

8.00

Pradeep Kumar

Pattern Tooling and Quality Optimization of Investment Castings

MHRD

(R&D)

8.00

P.K. Sahoo

Simulation of Pollutant Despersion from a chimney Using CFD

DST

7.26

S.C. Solanki

Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed

DST

19.76

B.K. Gandhi

Cost-effective transportation of bulk solids through slurry pipelines

MHRD

(TAT)

14.00

2005-06

Principal Investigator

Name of Project

Sponsoring Agency

Outlay (Amount

in Lakhs of Rs.)

B. K. Gandhi

Slurry Erosion Properties of Laser Claddings

BRNS

9.28

K.N. Agarwal

Centre for Heat Transfer Studies in Eco Friendly Refrigeration System

MHRD

7.00

S.P. Nigam

Modernization of Mechanical Engineering Laboratories

MHRD

9.00

Head

Fund for Improvement S&T Infrastructure in University and Higher Educational Institution (FIST)

DST

20.0

 2004-05

Principal Investigator

Name of Project

Sponsoring Agency

Outlay (Amount

in Lakhs of Rs.)

B.K. Mishra

Effect of asymmetric heating of fuel pins on fuel bundle integrity

BRNS

5.04

H.S. Shan

Enhancing Capability of Abrasive Flow Machining Process

DST

7.98

N.K. Mehta

Software Development for Manufacturing Planning & Control in Automated Manufacturing System

AICTE

9.00

2003-04

 B.K. Mishra

Effect of asymmetric heating of fuel pins on fuel bundle integrity

BRNS

5.04

H.S. Shan

Enhancing Capability of Abrasive Flow Machining Process

DST

7.98

P.K. Sahoo

Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss”

DAE

(BRNS)

31.54

Pradeep Kumar

Development of Performance Studies of Evaporative Pattern Casting Process

DST

14.25

K.N.Agarwal

Centre for Heat Transfer Studies in Eco Friendly Refrigeration System

MHRD

(TAT)

7.00

Pramod Kumar Jain

Development of a Re-configurable Manu-facturing System (RMS) framework using autonomous and Cooperative agent – based technology

MHRD

(R&D)

8.00

Pradeep Kumar

Pattern Tooling and Quality Optimization of Investment Castings

MHRD

(R&D)

8.00

 

Principal Investigator

Title of the Project

Sponsoring Agency

Outlay (in Lakhs of Rs.)

B. K. Mishra

Pradeep Kumar

Process Parameters Optimization and FEM Modeling of Ultrasonic Srilling Process

AICTE

5.00

 

 

 

 

 

 

 

Sponsored Research Projects completed during 2002-2007 

 

Principal Investigator Title of the Project Sponsoring Agency Outlay (in Lakhs of Rs.)
B. K. Mishra

Pradeep Kumar

Process Parameters Optimization and FEM Modeling of Ultrasonic Srilling Process AICTE 5.00

 

2003-04

 

B.K. Mishra Effect of asymmetric heating of fuel pins on fuel bundle integrity BRNS 5.04
H.S. Shan Enhancing Capability of Abrasive Flow Machining Process DST 7.98
P.K. Sahoo Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss” DAE

(BRNS)

31.54
Pradeep Kumar Development of Performance Studies of Evaporative Pattern Casting Process DST 14.25
K.N.Agarwal Centre for Heat Transfer Studies in Eco Friendly Refrigeration System MHRD

(TAT)

7.00
Pramod Kumar Jain Development of a Re-configurable Manu-facturing System (RMS) framework using autonomous and Cooperative agent – based technology MHRD

(R&D)

8.00
Pradeep Kumar Pattern Tooling and Quality Optimization of Investment Castings MHRD

(R&D)

8.00

 

2004-05

 

Principal Investigator Name of Project Sponsoring Agency Outlay (Amount

in Lakhs of Rs.)

B.K. Mishra Effect of asymmetric heating of fuel pins on fuel bundle integrity BRNS 5.04
H.S. Shan Enhancing Capability of Abrasive Flow Machining Process DST 7.98
N.K. Mehta Software Development for Manufacturing Planning & Control in Automated Manufacturing System AICTE 9.00

 

2005-06

 

Principal Investigator Name of Project Sponsoring Agency Outlay (Amount

in Lakhs of Rs.)

B. K. Gandhi Slurry Erosion Properties of Laser Claddings BRNS 9.28
K.N. Agarwal Centre for Heat Transfer Studies in Eco Friendly Refrigeration System MHRD 7.00
S.P. Nigam Modernization of Mechanical Engineering Laboratories MHRD 9.00
Head Fund for Improvement S&T Infrastructure in University and Higher Educational Institution (FIST) DST 20.0

 

2006-07

 

Principal Investigator Name of Project Sponsoring Agency Outlay (Amount

in Lakhs of Rs.)

Pramod Kumar Jain Development of A Re-configurable Manufacturing System (RMS) framework using autonomous and Cooperative agent – based technology MHRD

(R&D)

8.00
Pradeep Kumar Pattern Tooling and Quality Optimization of Investment Castings MHRD

(R&D)

8.00
P.K. Sahoo Simulation of Pollutant Despersion from a chimney Using CFD DST 7.26
S.C. Solanki Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed DST 19.76
B.K. Gandhi Cost-effective transportation of bulk solids through slurry pipelines MHRD

(TAT)

14.00

 

Continuing Sponsored Research Projects 

 

   Principal Investigator/ Coordinator Name of the Project    Sponsoring Agency Outlay (in lakh of  Rupees)    
D.K. Dwivedi Development of Wear resistant Piston materials CSIR, New Delhi 9.26
Dr. V.H. Saran Collaboration in Research & Development of New Curriculam  in Sound and Vibration. EU-Asia Link Program Rs. 578
Pradeep Kumar Development and Performance Studies of Evaporative Pattern Casting Process DST 14.25
B.K. Mishra Near Net Shape Manufacturing of Metal Matrix Composite through Investment Casting Process MHRD 14.00
P.K. Sahoo Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss BRNS 31.54
P.K. Sahoo Simulation of Pollutant Dispersion from a chimney Using CFD DST 7.26
S.C. Solanki Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed DST 19.76
B.K. Gandhi Cost-effective transportation of bulk solids through slurry pipelines MHRD 14.00

 

New Sponsored Research Projects  

 

Principal Investigator  Name of the Project Sponsoring Agency Outlay (in  Lakh of Rupees)
A.K. Sharma Microwave Joining of Metals SRIC, IIT Roorkee . 1.0 Lac 
B.K. Gandhi Development of non-cobalt base cavitation resistant surface by laser cladding process. BRNS 14.6 lac 
 
 
B.K. Gandhi /

D.K. Dwivedi

Development of non-cobalt base cavitation resistant surface by laser cladding process BRNS, Mumbai 13.95
Dr. Satish C. Sharma A Parametric Study of Performance of a Coriolis Mass Flow Rate Meter. DST 19.8 
N. Arora /

D.K Dwivedi

Process Modelling of Twin Wire Welding System DST, New Delhi 9.38 
P. M. Pathak Design, Fabrication and Control of a Planer Cooperative Space Robot SRIC, IIT Roorkee 1.0 Lac
V.K. Goel Influence of Low Frequency Vibration on Activity Comfort while Traveling by Railway Vehicles. SIDA, Stockholm 35.10 Lacs (received by KTH)
V.Huzur Saran Effect of Low Frequency Vibration on Human Comfort. SERC, D.S.T. Rs. 43.93 lacs
D.K Dwivedi Investigation on the Failure of Aluminium Wound  Distribution Transformers and Recommendation of Suitable Material for Manufacturing Distribution Transformer Windings  (R & D) MOP, GOI 10.04 lacs

Sponsored Research Projects completed during 2002-2007