Spotlight
Student Homepages
Faculty Profiles
About Us
Labs
Publications

Journals


Conference,Symposia,Seminar & Workshops


Journals

2002-03 

  • Singh, S. and Shan, H.S., Development of Magneto-Abrasive Flow Machining Process, International Journal of Machine Tool and Manufacture, Vol. 42, No. 08, 2002, pp. 953–959.
  • Momin, AME., Saini, J. S. and Solanki, S. C., Heart Transfer and Friction is Solar Air Heater Duct with V-shaped rib Roughness on Absorber Plate, International Journal of Heat and Mass Transfer, 45 (2002) 3383–3396.
  • Kumar, Pradeep, Goel, P., Product Quality Optimization Using Fuzzy Set Concept A case study, Quality Engineering, Vol. 15, No. 1, (2002) 01–08.
  • Singh, S. Shan, H.S., & Kumar Pradeep, Wear Behaviour of Materials in Magnetically Assisted Abrasive Flow Machining, Journal of Material Processing Technology, Elsevier, Vol. 128, No. 01–03 (2002), 151-158.
  • Singh, S.Shan, H.S., and Kumar Pradeep, Parametric Optimization of Magnetic Field Assisted Abrasive Flow Machining by Taguchi Method, Quality and Reliability Engineering International, Vol. 18, (2002)., pp. 953–959.
  • Kumar, Pradeep & Anon, Mustafa Abdo, Effect of Molding Materials on the Quality of Investment Castings, Indian Foundry Journal, Vol. 48. (2002). 28–33.
  • Kumar, Pradeep, Six Sigma in Manufacturing, Productivity, Vol. 43, (2002), 196–202.
  • Kumar, Pradeep, and Patra, U, Effect of Fly Ash (As an additive to Green Sand) on the Tensile Properties of Al-7% si Alloy Castings Using Taguchi Technique, Indian Foundry Journal, Vol. 48, (2002), 17–28.
  • Ramji, K., Goel V. K., and Saran V.H., Stiffness Properties of Small-Sized Pneumatic Tyres, Proc. Instn Mech.Egnrs, Vol. 216, Part D, Jr. Auto Engg (2002), 107–114.
  • Ramji K., and Goel V.K, Vertical Dynamics Analysis of Three- Wheeled Motor Vehicles, Jr.I.E. (India), Vol. 83, (2002), 40–51.
  • Agarwal K.N., Verma H.K., Aphawam M.A., Anil Kumar, A suggested improvement in heat transfer correlation for tareed connection condensation of refrigerant 22 in horizontal tubes, J.IE (I) Mech. Engg. Div. Vol. 83, April 2002, pp. 05–15.
  • Gupta, S. R., Reddy, M.V.V., Influence of baking condition of MMAW Electrodes on Weld Mechanical Properties, Indian Welding Journal, Oct. (2002), 32–38.
  • Sharma, S. C., Jain, S. C., and T. Nagaraju, Combined influence of Journal Misalignment and Surface Roughness on the performance of origice compensated Non-Recessed Hybrid Journal Bearing, STLE Tribo. Trans. (USA) Vol. 45, No. 04, pp. 457–463, 2002.
  • Sharma, S. C., Kumar Vijay, Jain, S. C., Nagaraju T. and Prasad Giriraj, Thermohydrostatic Analysis of of Slot-Entry Hybrid Journal Bearing Tribology Int. (U.K.) Vol. 35, No. 09, pp. 561–577, 2002.
  • Sharma, S. C., Singh, Narendra, Jain, S. C. and Reddy S. Sanjiva, Performance of Mueltirecess Hydrostatic/Hydrid Journal Bearing of various Recess shapes using Membrane Flow Valve Restrictor, Proc. of 2nd International Conf. of Fluid Mechanics and Fluid Power held at IIT Roorkee Dec. 12-14, 2002 Vol. II, pp. 711–723.
  • Sharma, S. C., Jain, S. C. and D. K.Bharuka, Influence of Recess shape on the Performance of a capillary Compensated Circular Thrust Pad Bearing, Tribology Int., (U.K.), Vol. 35, No. 06, pp. 347–356, 2002.
  • Pandey, N. D., Arora, Navneet, Bharti, A. and Chakravorty, P., ‘Dissimilar metal welding using Nd: YAG pulsed Laser’, Indian Welding Journal, Vol. 35, No. 03, pp. 37–48, July 2002.
  • Gandhi, B. K., Singh, S. N. and Seshadri, V., Effect of Speed on the Performance Characteristics of Cenrifugal Slurry Pumps, Trans ASCE, J.Hydraulic Engineering, Vol. 128/2, 2002, pp.225–229.
  • Sondh, S. H., Singh, S. N., Seshadri V. and Gandhi, B.K., Design and Development of Variable Area Flowmeter, Int. J. Flow Measurement and Instrumentation, Vol. 13,, No. 3, 2002, pp. 69–73.
  • Banchhor, P. K., Singh, S. N., Seshadri, V. and Gandhi, B. K., Performance Characteristics of Wedge Flowmeter using CFD, Computational Fluid Dynamics, Vol. 11, No. 03, 2002, pp. 279–284.
  • Gandhi, B. K. and Borse, S. V., Effect of Particle size and Size Distribution on Estimating Erosion Wear of Cast Iron in Sand-Water slurries, Indian Journal of Engineering and Materials Sciences, Vol. 09, 2002, pp. 480–486.
  • Tafesse, G., Jain, P.K., Preliminary Manufacturability Analysis Using Feature-Function-Resource Considerations for Cylindrical Machined Parts International Journal of computer Integrated Manufacturing, 2002, Vol. 15/4, 361–378.
  • Jain, P. K., Fukuda, Y., Yamamoto, M., & Fukuma, T., A manufacturing system development framework using data models driven approach, International journal of Production Research, 2003, Vol. 40, No. 08, pp. 1785–1809.
  • Solimanpur, D.M., Vrat, P. and Shankar, R., A Transiently Chaotic Neural Network Approach to Cellular Manufacturing, International Journal of Production Research, 40(10), 2002, pp-2225-2244.
  • Garg. S., Vrat, P. and Kanda, A. “Trade off Between Multi-Skilling and Inventory in Assembly Line operations under Demand Variability, International Journal of Operations & Production Management, Vol. 22, No. 5, pp. 565-583, 2002.
  • Khanna, V.K., Vrat, P., Shankar, R., Sahay and B. S., Developing Causal Relationship for TQM Index for Indian Automobile Sector, Work Study (An International Journal) Vol. 51 (6-7), 2002 pp. 363-373.
  • Khanna, V.K., Vrat, P., Shankar, R., Sahay, B.S., and Gautam, A., 2003, TQM Modeling of Auto Sector : A System Dynamics Approach, Work Study, (An International Journal) Vol. 52 (3), March, 2003 pp 94-101.
  • Khanna, V.K., Vrat, P., Shankar, R. and Sahay, B.S., “TQM Practices in Indian Automobile Sector : A Survey, “Productivity” Vol. 43, No.3, pp. 407-417, 2002.
  • Khanna, V. K., Vrat, P., Shankar, R. and Sahay, B. S., Six sigma in Indian automobile sector, Productivity, Vol. 43 (2), July-Sep. 2002, pp. 208-214.
 

2003-04 

  • Agrawal, K.N., Ravi Kumar, Sachida N. Lal, and Varma, Hari K., Heat Transfer Augmentation by segmented tape inserts during condensation of R-22 inside a horizontal tube, 2004, pp. 143-150.
  • Balan, S., Asokan, P., Kumar, P., (2004), Vehicle Routing in Supply Chain Management, Productivity Journal, India, Vol. 44, No. 4, pp. 606-612
  • Bhattacharyya, T.K. and Khaled Khodary,  Finite Difference Solution of Convection in Arbitrary Geometry by Micro-transformation, VI ISHMT/ ASME HMT Conference, Kalpakkam, Jan 5-7, 2004, pp. 290-29.
  • Gandhi, B.K., Singh, S.N. and V. Seshadri, A Study of the Effect of Surface Orientation on Erosion Wear of Flat Specimens Moving in a Solid – Liquid Suspension, Wear (International journal), Vol. 254, 2003, pp. 1233 – 1238.
  • Garg Suresh, Vrat P., Kanda A. and Dua B.B. Aspects of Flexibility and Quality in Indian Manufacturing Practices – A Survey, Intl. Journal of Manufacturing Tech. & Management, Vol. 5, Nos. 5/6, pp. 443-458, 2003. 
  • Garg, H.C., Navneet Arora, and Mehta, N.P., Stochastic Behaviour and Maintenance Planning for Steam Flow System in a Thermal Power Plant, Industrial Engineering Journal, Vol. XXXIII, No.2 Feb. 2004, pp. 18-25.
  • Goel, V.K. and Ramji, K., Analytical Prediction of Steady State Tyre Characterisitcs,  Int. J. Vehicle Design, Vol. 34, No. 3, 2004, pp. 260-285.
  • Jain Ajai, Jain, P.K., and Singh, I.P., Real Time Scheduling in FMS: An investigation on Suitability and Effectiveness of Flexible Process Plans, International Journal of Simulation and Modelling, 2003, Vol. 2, No. 3, pp. 57-69.
  • Jain, P.K. and Y. Fukuda, A rule based approach for deadlock avoidance in cellular manufacturing, International Journal of Simulation and Modelling, 2003, Vol. 2, No. 4, pp. 97-108.
  • Jain, P.K., Y.Fukuda, M.Yamamoto and T.Fukuma, A manufacturing system development framework using data models driven approach, International Journal of Production Research, 2003, Vol.40, (8), pp 1785-1809.
  • Khanna V.K., Vrat P. and Shankar R. – Strategy Mishap in the TQM Journey – A System Dynamics Approach. Journal of Advances in Management Research, Vol. I,  No.2, pp. 46- 59, 2004.
  • Khanna, V. K., Vrat, P., and Sahay, B. S., 2003, Status of TQM Practices in Indian Automobile Sector after liberalization: A Survey, Industrial Engg. Journal. Vol. XXXIII, No.3, pp. 3-12, 2004.
  • Khanna, V. K., Vrat, P., Shankar, R., Sahay, B.S., and Gautam, A., 2003, TQM Modeling of Auto Sector: A System Dynamics Approach, Work Study, (An International Journal) Vol. 52 (3), March, 2003, pp. 94-101.
  • Khanna, V.K., Vrat, P., Shankar, R., and Sahay, B.S. Managing the Transition Phase in TQM Journey: A System Dynamics Approach, International Journal of Quality & Reliability Management, Vol. 21, No.5, 2004, pp. 518-544.
  • Kumar Sudhir, Creese, Robert, Kumar, P, (2004), Investigation of the Effect of Process Parameters on the Mechanical Properties (Tensile) of Al–7%Si Alloy Castings Produced by Evaporative Pattern Casting Process, Indian Foundry Journal, vol. 50, No. 7, pp. 21 –29.
  • Kumar, M, Vrat, P. and Shankar, R., A Fuzzy Goal Programming Approach for Vendor Selection Problem in a Supply Chain, Computer and Industrial Engineering. Vol. 46 (2004), pp. 69-85.
  • Kumar, P., Goel, P, (2003) Product Quality Optimization Using Fuzzy Set Concepts - A Case Study, Quality Engineering Journal, Vol. 15, No. 1, pp. 1 – 8. U.S.A.
  • Mishra Somnath, Deshmukh S.G. and Prem Vrat Technological Forecasting Applications : Framework and Case Study on Combat Vehicles, Defence Science Journal, Vol. 53, No.4, Oct. 2003, pp. 371-391. 
  • Misra, R. D., Sahoo, P.K., and Gupta, A.,  Thermoeconomic Optimization of a Single Effect H2O/LiBr Absorption Chiller System, Int. J. Refrig., VoI.26 (2), 2003, pp.158-169.
  • Prem Vrat, Quality Assurance in Technical Education Recent Trends & Challenges Ahead, The India Journal of Tech. Education, Vol. 26, No.2, April-June 2003, pp.12-14.
  • Ramji, K., Saran, V.H., Goel, V.K., and Deep Kumsum, Optimum Design of Suspension System for Tree-Wheeled Motor Vehicle Using Random Search Optimisation Technique, 18th IAVSD Symposium on dynamics of Vehicles on Roads and on Tracks, Kanagawa Institute of Technology, Japan August 25-29, 2003.
  • Rupesh Kumar Pati, Prem Vrat and Pradeep Kumar, Entry to Customer to Manufacturer  Chain  by  an  Indian  Paper  Industry – A Reverse Logistics Model, Productivity,  Vol.44, No.3, Oct. – Dec. 2004, pp. 443-449, Vol. 44, No.3, Oct.-Dec. 2003, pp. 443-449.
  • Saran, V.H. , Goel, V.K., and Mishra, B.K., Ride Behavoiur Analysis of a Three – Wheeled Vehicle,  13th International Conference of ISME, Dec. 2003, IIT Roorkee, Dec. 30 – 31, 2003
  • Sharma, Satish C., T. Nagraju and Jain, S.C., Combined Influence of Journal Misalignment and Surface Roughness on the Performance of Orifice Compensated Non-Recessed Hybrid Journal Bearing, STLE Tribology Transactions (U.S.A.), Vol. 45, No. 4, pp. 457-463, 2003.
  • Sharma, Satish C., Vijay Kumar, Jain, S.C. and T. Nagaraju,  Study of Hole – Entry Hybrid Journal Bearing System Considering Combined Influence of Thermal and Elastic Effects, Tribo., Int., Vol. 36, No.12, pp. 903-920, 2003.
  • Singh Pradeep K., Jain, Pramod K. and Satish C. Jain, Tolerance analysis of mechanical assemblies using Monte Carlo simulation, International Journal of Industrial Engineering: Theory and Applications, 10(2), 2003, pp. 188-196.
  • Singh, H., Pradeep Kumar,  Tool Wear Optimization in Turning Operation By Taguchi Method, Indian Journal of Engineering and Material Sciences, Vol. 11, 2004, pp. 19-24.
  • Singh, H., Pradeep Kumar, Quality Optimization of Turned Parts (En24 Steel) by Taguchi Method, Productivity Journal, 2003, pp 43 – 50, India.
  • Singh, K.M. and Tanaka, M., Dual Reciprocity Boundary Element Analysis of Transient Advection – Diffusion, International Journal of Numerical Methods in heat and Fluid Flow Vol. 13, 2003, pp. 633 – 646.
  • Singh, N., Sharma, Satish C., Jain, S.C. and Reddy, S. Sanjeeva, Performance of Membrane Compensated Multirecess Hydrostatic/Hybrid Flexible Journal Bearing System Considering Various Recess Shapes, Trib. Int., Vol. 37, No. 1, 2004, p. 11-24.    
  • Singh, P. K., Jain, P. K., and Jain, S. C., Simultaneous Optimal Selection of Design and Manufacturing Tolerances With Different Stack up Conditions Using Genetic Algorithms, International Journal of Production Research, 2003, 41(11), pp. 2411-2429.
  • Singh, P. K., Jain, S. C. and Jain, P. K., Concurrent Tolerance Design with Alternative Processes (Machines), International Journal of Simulation and Modeling, 2004, Vol. 3, No. 1, pp. 5-16.
  • Singh, P.K., Jain, S.C. and Jain, P.K., Tolerance allocation with alternative manufacturing processes – suitability of Genetic Algorithm, International Journal of Simulation and Modelling, 2003, Vol. 2, No. 1-2, 22-34.
  • Singh, S.N., Gandhi, B.K., V. Seshadri and Chauhan, V.S., Design of a Bluff body for Development of Variable Area Orifice-meter, Flow Measurement and Instrumentation (International Journal), Vol. 15, 2004, pp. 97-103.
  • Solimanpour, D. M., Vrat, P., Shankar, R., A Multi-objective Genetic Algorithm Approach to the Design of Cellular Manufacturing Systems International Journal of Production Research, Vol. 42, No.7,  pp. 1419-1441, 2004.
  • Solimanpour, D.M., Vrat, P. and Shankar, R., A heuristic to minimize makespan of cell scheduling problem, Intl. Jour. of Production Economics, 88 (2004), pp. 231-241.
  • Solimanpour, D.M., Vrat, P. and Shankar, R., A Neuro-Tabu Search Heuristic for the Flow  Shop Scheduling Problem. Computers & Operations Research, Vol. 31 (13), pp. 2151-2164, 2004.
  • Solimanpour, D.M., Vrat, P. and Shankar, R., Ant Colony Optimization Algorithm to the Intercell Layout Problem in Cellular Manufacturing, European Journal of Operational Research, 157 (2004), pp.592-606.
  • Solimanpour, D.M., Vrat, P. and Shankar, R., Feasibility and Robustness of Transiently Chaotic Neural Networks Applied to the Cell Formation Problem, International Journal of Production Research, Vol. 42 No.6,  pp.1065-1082, 2004.
  • T. Nagaraju, Sharma, Satish  C. and Jain, S.C., Performance of Externally Pressurzied Non-Recessed Roughened Journal Bearing, System Operating with Non-Newtonian Lubricant,  STLE, Tribo. Trans. (U.S.A.), Vol. 46, No. 3, pp. 404-413, 2003.
  • Toshiko Fukuma, Jain, P.K. and Masaaki Yamamoto, A study on MRP system behavior using lead-time and safety stock as control variables, Journal of Japan Industrial Management Association, 54, 2003, 260-267. (In Japanese)
  • V. Seshadri, Gandhi, B.K., Singh, S.N. and Pandey, R.K., Analysis of the Effect of Body Shape on Annubar Factor Using CFD, Measurement (International Journal), Vol. 35, 2004, pp. 25-32.
  • Vijay Kumar, Sharma, Satish C. and Jain, S.C., On the Stability Margin of Hole Entry Hybrid Journal Bearing Considering Viscosity Temperature Variation, STLE Trib. Trans. (USA), Vol. 46, No. 3, pp. 421-427, 2003.
  • Vijay Kumar, Sharma, Satish C. and Jain, S.C., Stability Marigin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects, ASME Transaction, Journal of Tribology, Vol. 126, Oct. 2003.
  • Thakur, N.S., Saini, J.S. and Solanki, S.C.,  Heat Transfer and Friction Factor Correlations for Packed Bed Solar Air Heater for a Low Porosity System, Solar Energy, 74, pp. 319-329, 2003. 

2004-05 

  • Balan, S., Prem Vrat and Pradeep Kumar, "Developing causal relationship for a supply chain management index for the Indian Automobile Sector", PRODUCTIVITY, vol. 45, No.3, pp. 413-421. 
  • Dowedo, Akshay, Kumar, Pradeep., Quality  Function Deployment for Operation  Theaters – Procedure & a Case Study, Productivity Journal, India, Vol. 45, No.1 pp 75-84, 2004.
  • Dwivedi D.K. Arjun T.S., Thakur P., Vaidya H., Singh K., Sliding Wear and Friction Behaviour of Al-18%Si-0.5%Mg Alloy Material Processing Technology, Vol. 152 (3), 323, 2004.
  • Dwivedi, D.K., Abrasive Wear Behaviour of Iron Base Hard Surfacing Alloy Coatings Developed By Welding, Surface Engineering (IOM), Vol. 20 (2), 87, 2004.
  • Dwivedi, D.K., Microstructure and Abrasive Wear Behaviour Of Iron Base Hardfacing Developed by SMA welding, Material Science and Technology (IOM), 20, 10, 1326, 2004.
  • Gandhi B.K. and Borse S.V., Nominal Particle Size of Multi-size Particulate Slurries for Evaluation of Erosion Wear and Effect of Fine Particles, Wear, Vol. 257, pp. 73-79, 2004.
  • Goel, V.K. and Ramji K., ‘Analytical Predictions of Steady State Tyre Characteristics’, Int J. Vehicle Design, Vol 34, (3), pp. 260- 285, 2004.
  • Jain, Ajai, Jain, P.K., and Singh, I.P., ‘ An investigation on the performance of dispatching rules in FMS scheduling’, International Journal of Simulation and Modelling, Vol.3, (2-3), pp. 49-60, 2004.
  • Kansal, Harmesh, Singh, S., Kumar, Pradeep., Application of Taguchi Philosophy for Optimization of Powder Mixed EDM, Int. J. of Manufacturing Technology and Management (IJMTM), Elsevier, Vol. 7, (2/3/4), pp. 329-341, 2005. 
  • Khan, I.A., Bhasin, V., Vaze, K.K., Kushwaha, H.S., Srivastava, R. and Gupta S.R. An Estimation Procedure to Evaluate Limit Loads of Bi-Metallic Specimens. Part–1, International Journal of Pressure Vessels and Piping, Vol. 81, (5), pp. 451-462, 2004. 
  • Kumar Sudhir, Kumar, Pradeep, Shan, H.S., Effect of Filler Material in Zircon Flour Coating Used in Evaporative Pattern Casting Process, Indian Foundry journal, Vol. 50, (12), pp. 34-40, 2004. 
  • Kumar, R., Agarwal, K.N., Lal S.N., Varma, H.K., An Experimental Study on Condensation Enhancement of R-22 By The Turbulence Promoter, ASHRAE Trans., pp. 18-25, 2005.
  • Kumar, R., Gupta A., Vishvakarma, S., Condensation of R-134a Vapour Over Single Horizontal Integral-Fin tubes: Effect of Fin Height, International Journal of Refrigeration, Vol. 28, pp. 428-435, 2005.
  • Kumar, S., Creese, R.C., Kumar, P., and Shan, H.S. Investigations of the Effect Of Process Parameters On the Mechanical Properties (Tensile) of Al-7%Si alloy castings produced by evaporative casting process Indian Foundry Journal Vol. 50. (7), pp. 21-29, 2004.
  • Mishra Somnath, Deshmukh S.G. and Vrat Prem “Some Issues on Technological Forecasting and Technology Transfer in India” Intl. Jour. Of Tech. Transfer and Commercialisation, Vol. 4, No. 2, 2005, pp. 231-246.
  • Misra, R. D., Sahoo, P.K., and Gupta, A., Thermoeconomic Evaluation and Optimization of a Double-Effect H2O/LiBr Vapour-Absorption Refrigeration System, Int. J. Refrig., Vol. 28, pp. 331-343, 2005.
  • Misra, R. D., Sahoo, P.K., and Gupta, A., Thermoeconomic Optimization of a LiBr/H2O Absorption Chiller using Structural Method, ASME: Journal of Energy Resources Technology; Vol. 127, pp. 119-124, 2005.
  • Nagaraju T., Sharma Satish C. and Jain S.C., The Stability Margin of Roughened Hole Entry Hybrid Journal Bearing System, STLE, Tribo. Transaction, Vol. 48, (1), pp. 140–146, 2005.
  • Nigam S.P., Loss Factor for a clamped Fdge Circular Plate Subjected to an Eccentric Loading, Indian Journal of Engineering & Materials Science, New Delhi Vol. 11, pp. 79 –84, 2004.
  • Pant B. & Saini J.S., Optimization of bed parameters for packed bed solar energy collection system, Renewable Energy Journal, Vol. 29, pp. 1863-1876, 2004.
  • Pati, R.K., Vrat Prem and Pradeep Kumar, “Cost optimization Model in Recycled Waste Reverse Logistics System”, International Journal of Business Performance Management, (Spl. Issue on Manufacturing Strategy),Vol. 6,No.3/4, 2004, pp.245-261.
  • Pattanaik, L.N., Jain, P.K. & Mehta, N.K., ‘An Inter-Cell Flow Reduction Heuristic Using Production Volume Of Parts’, Int. J. of Simulation Modeling, Vol. 3. (2-3), pp. 90-101, 2004.
  • Rajullu, K.G., Kumar, R., Mohanty, B., Varma, H.K., Enhancement Of Nucleate Pool Boiling Heat Transfer By Reentrant Cavity Horizontal Tubes, Int. J. Heat Exchangers, Vol. 5(2) pp. 310-314, 2004.
  • Rajullu, K.G., Kumar, R., Mohanty, B., Varma, H.K., Enhancement of Nucleate Pool Boiling Heat Transfer Coefficient by Reentrant Cavity Surfaces, J of Heat and Mass Transfer, Vol. 41, 127-132, 2004.
  • Ramji, K., Gupta A., Saran V.H., Goel, V.K. and Kumar V., Road Roughness Measurements using PSD Approach, I.E. (India), Civil Engg. Division, Vol. 85, pp 193-200, 2004.
  • Rupesh Pati, Vrat, Prem., Kumar,  Pradeep., Cost Optimization Model in Recycled Waste Reverse Logistics System, International Journal of Business Performance Management, Inderscience publisher, Vol. 6 (¾), pp. 245-261, 2004.
  • S.N. Singh, B.K. Gandhi, V. Seshadri and J. Singh, Effect of Bluff Body Shape on Vortex Flow-meter Performance, Indian Journal of Engineering and Materials Sciences, Vol. 11(5), pp. 378-384, 2004.
  • Sahoo, P.K., Misra, R. D., and Gupta, A., Exergoeconomic Optimization of an Aqua Ammonia Absorption Refrigeration System, Int. J. Exergy., Vol. 1 (1), pp.82-93, 2004.
  • Sen, M. and Shan, H.S., A review of electrochemical macro to micro hole drilling processes International Journal of Machine Tools & Manufacture, Vol. 25, (2), pp. 137- 152, 2005. 
  • Sen, M. and Shan, H.S., Analysis of hole quality characteristics in the electro jet drilling process International Journal of Machine Tools & Manufacture.
  • Shalini Anand, Dahiya, R.P., Talyan, V and Vrat Prem, “Investigations of Methane emissions from Rice cultivation in Indian Context”, Environmental International, Vol. 31, pp.469-482, 2005.
  • Sharma Satish C., Nagaraju T. and S Jain. C., Performance of an Orifice Compensated Hole-Entry Hybrid Journal Bearing System considering Surface Roughness and Thermal Effects, STLE Tribo., Trans., Vol. 47, pp. 557 – 566, 2004.
  • Singh Amol, Mehta, N.K. & Jain, P.K. `Performance analysis of flow time based sispatching rules with unreliable machines’, Int. J. of Simulation Modeling, Vol.3, (4), pp. 109-120, 2004.
  • Singh Amol, Mehta, N.K. & Jain, P.K.  `Tardiness based new dispatching rules for shop scheduling with unreliable machines’, Int. J. of Simulation Modeling, Vol.4, No.1, pp. 5-16, 2005.
  • Singh S.N., Gandhi B.K., Seshadri V. and Chauhan V.S., Design of a Bluff Body for Development of Variable Area Orifice-meter, Flow Measurement and Instrumentation. Vol. 15, pp. 97-103, 2004.
  • Singh, P.K., Jain, P.K. and Jain, S.C.,  A GA Based Solution to Optimal Tolerance Synthesis of Mechanical Assemblies with Alternative Manufacturing Processes – Benchmarking with ESLM, Proc. Institution of Mechanical Engineers, Journal of Engineering Manufacture, Vol. 218 (B7). pp. 765-778, 2004.
  • Singh, P.K., Jain, P.K., Jain, S.C., ‘ A genetic algorithm-based solution to optimal tolerance synthesis of mechanical assemblies with alternative manufacturing processes: focus on complex tolerancing problems’, International Journal of Production Research, Vol. 42, (24), pp. 5185-5215, 2004.
  • Singh, P.K., Jain, S.C. and Jain, P.K., ‘Advanced optimal tolerance deign of mechanical assemblies with interrelated dimension chaims and process precision limits, Computers in Industry, Vol. 56, (2), pp. 179-194, 2005.
  • Vijay Kumar, Sharma Satish C and Jain S.C., Stability Margin of Hybrid Journal Bearing: Influence of Thermal and Elastic Effects, ASME Journal of Tribology, Vol.126, (3) pp. 630–634, 2004.
  • Walia, R.S., Shan, H.S., and Kumar, P. Improving EDM process efficiency by ultrasonic vibrations Journal of Pure and Applied Physics, Vol. 26, (2-3), 2004.
  • Walia, R.S., Shan, H.S., Kumar, Pradeep., Improving EDM Process Efficiency by Ultrasonic Vibrations Journal of Pure and Applied. Ultrasonic, Vol 26, (2 & 3), pp. 84-89, 2004.
  
 

2005-06 

  • Anand, A., R.S. and Kumar, P., Detection of Flaws in Weldment Images Using Region Growing Segmentation Technique, Indian Welding Journal, Vol. 38, No. 3, pp. 39-42, 2005.
  • Arivazhagan, A., Mehta, N.K. and Jain P.K., Determination of Merchantable Volume for Finish Cuts in CAPP, International Journal of INGENIUM, Engineering Achievements Across the Global Village, Krakow-Glasgow-Random, Monographic Series of the Library of Maintenance Problems, ISSN 1363-514x, ISBN 83-7204-454-6,2005, Krakow, Poland, Vol. 3, pp 145-152, Glasgow Caledonian University, UK, 2005.
  • Balan, S., Vrat, P. and Kumar, P., Developing causal Ralationships and System Dynamics for a SCMI for the Indian Automobile Sector, International Journal of Management and Systems, Australia, Vol. 22, No. 2/3, 2006.
  • Behabadi M.A.A., Salimpore M.R., Kumar R. and Agrawal K.N., Augmentation of Forced Convection Condensation Heat Transfer Inside a Horizontal Tube Using Spiral Spring Inserts, Int. J. Enhanced Heat Transfer, Vol. 12 Issue 4, pp. 373-384, 2005.
  • Chaube, A., Sahoo, P.K. and Solanki, S.C. Analysis of Heat Transfer Augmentation and Flow Characteristics due to Rib Roughness over Absorber Plate of a Solar Air Heater. Renewable Energy, Vol. 31, pp. 317 – 331, 2006.
  • Desale, G R., Gandhi, B. K. and Jain, S. C., Improvement in the Design of a Pot Tester to Simulate Erosion Wear due to Solid-liquid Mixture”, Wear, Vol. 259, pp. 196-202, 2005.
  • Desale, G.R. Gandhi, B.K. and Jain, S.C.,  Improvement in the Design of a Pot Tester to Simulate Erosion Wear due to Solid-Liquid Mixture, WEAR, Vol. 259, pp. 196-202, 2005.
  • Dwivedi, D.K., Sharma, A. and Rajan, T.V., Influence of silicon morphology and mechanical Properties of piston alloys, Materials and Manufacturing Processes, 20, 5, 777 – 791, 2005.
  • Dwivedi, D.K., Wear Behaviour of Cast Hypereutectic Aluminium Silicon Alloys, Materials and Design, 27, 7, 610-16, 2006.
  • Goel, V.K., Thakur, M., Deep, K.  and Awasthi, B.P., Mathematical Model to Represent the Track Geometry Variation using PSD, Indian Railway Technical Bulletin, Vol. LXI, No. 312-313, Feb-May 2005, P1-10.
  • Gupta, A., Enhancement of Boiling Heat Transfer in a 5x3 Tube Bundle, International Journal of Heat and Mass Transfer, Vol. 48, pp. 3763-3772, 2005.
  • Hamid, A. A., Ghosh, P.K., Jain, S.C. and Ray, S., Influence of Particle Content and porosity on the wear Behavior of Cast In-Sity Al (Ml)- Al2 O3 (MnO2) Composites”, WEAR, (UK). WEAR,260, pp368-378, 2006
  • Hamid, A. A., Ghosh, P.K., Jain, S.C. and Ray, S., Processing, Microstructure and Mechanical Properties of In-Situ Al (Mg,Mn) – Al2 O3 (MnO2) Composite’, Metallurgical and Material Trans.- (USA) Vol. 36A, pp2211-2223, Aug., 2005
  • Hamid, A. A., Ghosh, P.K., Jain, S.C. and Ray, S., Processing, Microstructure and Mechanical Properties of In-Situ Al(Mg, Ti)- Al2 O3 (TiO2) Composite”, Metallurgical and Material Trans.- A (USA) Vol. 37A,pp.469-480, Aug., 2005
  • Jain, A., Jain P.K. and Singh I.P., An Integrated Scheme for Process Planning and Scheduling in FMS, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-005-0142-6, 2005.
  • Jain, A., Jain P.K. and Singh I.P., Deadlock analysis in FMS in the presence of flexible process plans-a simulation study, International Journal of Simulation and Modeling, Vol. 4, No. 2, 53-66, 2005.
  • Jaurker, A. R., Saini, J. S. and Gandhi, B. K., Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness, J Solar Energy, 2006 (in press).
  • Kansal, H.K., Singh, S. and Kumar, P., Application of Taguchi Method for Optimization of Powder Mixed Electrical Discharge Machining, International Journal of Manufacturing Technology and Management (IJMTM), Elsevier, Vol. 7, No. 2/3/4, pp. 329-341, 2005.
  • Kansal, H.K., Singh, S. and Kumar, P., Parametric Optimization of Powder Mixed Electrical Discharge Machining by Response Surface Methodology” Journal of Materials Processing Technology (JMPT), Elsevier, Vol. 169/3, pp 427 – 436, 2005.
  • Kumar, R., Gupta, A., and Sandeep Vishvakarama, Condensation of R-134 a Vapour Over Single Horizontal Integral – Fin Tubes: Effect of Fin Height, International Journal of Refrigeration, Vol. 28, pp. 428-435, 2005.
  • Kumar, R., Kumar, D. and Kumar, P., FLM to Select Suitable Maintenance Strategy in Process Industries Using MISO Model, International Journal of Quality in Maintenance Engineering (JQME), Vol. 11, No. 4, pp 359-374, 2005.
  • Kumar, R., Kumar, D. and Kumar, P., Manufacturing Excellence Through TPM Implementation – A practical analysis, Industrial Management and data systems, U.S.A., Vol. 106, No. 2, pp. 256-280, 2006.
  • Kumar, R., Kumar, D. and Kumar, P., Systematic Failure Mode Effect Analysis (FMEA) using Fuzzy Linguistic Modeling – A case Study, International Journal of Quality and Reliability Management, IJQRM, Vol. 22, pp. 986 – 1004, 2005.   
  • Kumar, S., Kumar, P. and Shan, H.S., Effect of Process Variables on Sand Mold Properties in EPC Process using Response Variables Surface Methodology, Indian Foundry Journal, Vol 51, no. 12, pp. 21-33, 2005.
  • Kumar, V., Sharma, S.C. and Jain, S.C., On the Restrictor Design Parametrs of Hybrid Journal Bearing for Optimum Rotordynamic Coefficients, Tribology International, UK , Vol. 39(4), 2006.
  • Mehta, N.K, Performance Evaluation of dispatching rules under varying system configuration parameters, DAAM International Scientific Book 2005, Chapter 48, Katalinic (Ed.), ISSN 1729-9687, ISBN 3-901509-43-7, DAAM International Vienna, pp. 591-608.
  • Misra, R.D., Sahoo, P.K., and Gupta, A., Thermeconomic Evaluation and Optimization of an Aqua – Ammonia Vapour – Absorption Refrigeration System, Int. J. Refrig., aeration, Vol. 29, pp. 471-59, 2006.
  • Misra, R.D., Sahoo, P.K., and Gupta, A., Thermoeconomic Evaluation and Optimization of a Double-Effect H2O/LiBr Vapour-Absorption Refrigeration System Int. J. of Ref. Vol. 28, pp. 331-343, 2005.
  • Misra, R.D., Sahoo, P.K., and Gupta, A., Thermoeconomic Evaluation and Optimization of an Aqua-Ammonia Vapour-Absorption Refrigeration System, Int. J. of Ref. Vol. 29, pp. 47-59,2006.
  • Misra, R.D., Sahoo, P.K., and Gupta, A., Thermoeconomic Optimization of a LiBr/H2O Absorption Chiller using Structural Method, Accepted, Trans. of ASME: Journal of Energy Resources Technology, Vol. 127, pp. 199-124, 2005.
  • Pandey, N.D., Shan, H.S.  and Mohandas, Cooling ability based integrated quality of laser drilled holes, Defense Science Journal, Vol. 56, NO. 1, pp. 93-101, 2006.
  • Pandey, N.D., Shan, H.S. and Bharti, A., Percussion drilling with laser : Hole completion criterion Int. J. of Advanced Manufacturing Technology, Mar. 2006 p. 101.
  • Pandey, N.D., Shan, H.S., and Mohandas, T,. Quality of Percussion Laser Drilled Holes for Cooling of Turbine Components Int. Quarterly of High Technology Plasma Processes, Vol. 9, No. 4,  pp. 625-654, 2005.
  • Pathak P.M., Mukherjee, A. and Dasgupta, A., Impedance Control of Space Robots using Rassive Degrees of Freedom in Comtroller Domain, Transactions ASME, Journal of Dynamic Systems, Mesurement, and Control., Vol. 127, pp. 564-578, 2005..
  • Pati, R., Varat, P. and Kumar, P., Integrated Chain Analysis of Recycled vis-a-vis Wood Pulp Paper Industry – An Indian Manufacturer View Point, International Journal of Value Chain Management, Vol. 1, No. 1, 44-63, 2005.
  • Sen, M., and Shan, H.S., Analysis of hole quality characteristics in the electro jet drilling process Int. J. of Machine Tools and Manufacture, Vol. 45, Issue 15, pp. 1706-1716, 2005.
  • Sen, M., and Shan, H.S., Analysis of roundness error and surface roughness in the electro jet drilling process Int. J. of Materials and Manufacturing Processes, Vol. 22, pp. 1-9, 2006.
  • Sen, M., and Shan, H.S., Optimal selection of machining conditions in the electro jet drilling process using hybrid NN-DF-GA approach Int. J. of Materials and Manufacturing Processes, Vol. 21, 2006, pp. 349-356, 2006.
  • Sharma, R., Kumar, A., Dwivedi, D.K., Influence of Silicon (wt. %) and Heat Treatment on Abrasive Wear Behaviour of Cast AI-Si-mg Alloys, Materials Science and Engineering A, 408, 1-2, pp. 274-280, 2005.
  • Sharma, T., Maria, S. and  Dwivedi, D.K., Abrasive Wear Behaviour of Fe-30cr-3.6c Overlays Deposited on Mild Steel, ISIJ International, 45,9, pp. 1322-25, 2005.
  • Shekhar S., Arora N. and Dutta, B.K., A Modified Damage Potential to Predict Crack Initiation in Welded Pipes-Theory and Experimental Verification, Int. J. of Pressure Vessel and Piping, Vol. 82, pp. 833-839, 2005.
  • Singh H.N., Kumar R. and Mohanty B., Pool Boiling Heat Transfer on Wire Screen Wrapped Horizontal Tubes, Int. J. Heat and Technology, Vol. 24(1), 2006.
  • Singh H.N., Kumar R. and Mohanty B., Pool Boiling of Water and Benzene on Horizontal Plain Tubes in a Vertical Grid, Int. J. of Heat & Technology, Vol. 23(1), pp. 69-72, 2005.
  • Singh I. and Bhatanagar N., Drilling of Uni-directional Glass Fiber Reinforced Plastic (UD-GFRP) Composite Laminates, International Journal of Advanced Manufacturing Technology, Ref. 27, pp.  870-876, 2006.
  • Singh I. and Bhatnagar N., Drilling Induced Danage in Glass Fiber Reinforced Plastic (UD-GFRP) Composite Laminates, International Journal of Advanced Manufacturing Technology, Ref. 27, pp. 877-882, 2006.
  • Singh P.K., Jain S.C. and Jain P.K., Comparative study of genetic algorithm and simulated annealing for optimal tolerance design formulated with discrete and continuous variables, Proceedings of the I MECH E Part B Journal of Engineering Manufacture (Professional Engineering Publishing), 219/10, pp 735-760, 2005.
  • Singh, H. and Kumar, P., Optimizing cutting force for turned parts using Taguchi’s parameter design approach. Indian Journal of Engineering & Materials Sciences (IJEMS), Vol. 12, pp 97-103, 2005.
  • Singh, H. and Kumar, P., Optimizing multi – machining characteristics through Taguchi’s approach and Utility Concept, Int. J. of Manufacturing Technology Management, Vol. 17, No. 2, pp 256-274, 2006.
  • Walia, R.S., Shan, H.S. and Kumar, P., Parametric optimization of centrifugal force assisted abrasive flow machining (CFAAFM) by the Taguchi method Int. J. of Materials and Manufacturing Processes Vol. 21, Issue 1&2, 2005.
  • Win, Z., Gakkhar, R.P., Jain, S.C. and Bhattacharya, M., Investigation of diesel engine opevaling and infection system parameters foe low noise emissions and fuel consumptions using Taguchi methods  Proc. I. Mech. E Vol. 219 No10 Part D J. Automabile Engg. 1237-1251, 2005.
  • Win, Z., Gakkhar, R.P., Jain, S.C. and Bhattacharya, M., Parameter optimization of a diesel engine to reduce noise fuel consumption and exhaust emissions using response surface methodology Proc. I Mech E Part D Journal of Automobile Engg. Vol. 219, Number 10, pp. 1181-1191, 2005.

<Top>

Conference, Symposia, Seminars & Workshops

2002-03 

  • Sen, M. & Shan, H. S., Scope of Research in Cellular Manufacturing Systems Proceedings National Conference on Future Trends in Mechanical Engineering: Research and Development, Chennai, Dec. 13-14, 2002.
  • Saini, J. S. and Solanki, S. C., Thermohydraulic Performance of Artificially Roughened Enhanced Efficiency Solar Air Heater, Proc. International Conference on Recent Advances in Solar Energy Conversion Systems, MACT Bhopal, Sep. 28-29, 2002.
  • Prasad, R. K. and Saini, J. S., Thermal performance study of matrix bed solar air heater, Proc. International Conference on Recent Advances in solar energy Conversion Systems, MACT Bhopal,  
    Sep. 28-29, 2002.
  • Saini, J. S., Artficial roughness-a potential method of enhancement of efficiency of solar air heater, keynote paper in Proc. National Conference on Emerging Energy Tecnologies, NIT, Hamirpur, Mar. 28-29, 2003.
  • Regin, A. Felix, Solanki, S. C.and Saini, J. S., Thermal performance analysis of latent heat storage systems, Proc. National Conference on Emerging Energy Technologies, NIT Hamirpur, Mar. 28-29, 2003.
  • Thakur, N. S., Saini, J. S. and Solanki, S. C., Thermal performance of packed bed solar air heater using low porosity System, Proc. National Conference on Emerging Energy Technologies, NIT Hamirpur,  
    Mar. 28-29, 2003.
  • Singh, R., Saini, R. P. and Saini, J. S., Packed bed solar energy storage system Proc. National Conference on Emerging Energy Technologies, NIT, Hamirpur,  
    Mar. 28-29, 2003.
  • N. S. Thaker, Saini, J. S. and Solanki, S. C., Thermal Hydraulic performance of packed bed solar air heaters, Proc. 2nd International & 29th National Fluid Mechanics and Fluid Power, IIT Roorkee, Dec. 12-14, 2002.
  • Singh, S. P., Shan, H. S., Kumar, Pradeep, Quality optimization of surfaces produced by magnetic abrasive flow machining using Taguchi Technique. 8th ISSAT international Conference on Reliability and Quality in design, Anaheim, USA, 07-09, Aug. 2002.
  • Kumar, Pradeep, and Creese, Robert, Effect of Fly Ash (As an Additive to Green Sand) on the Surface Roughness of Al-7% Si Alloy Casting Using Taguchi Technique, 106th AFS Casting Congress, Kansas, USA May 04-07, 2002.
  • Singh, H., Kumar, Pradeep, and Singh, I. P., Effect of Process Parameters on Power Consumption for Turned Parts Using Response Surface Technology, 47, Congress of ISTAM, Guwhati.
  • Ramji K., Kusum, Deep, Goel V. K., Optimum Design of Three-Wheeled Vehicle Suspension System Subjected to Random Road Excitation, National Conference on Transportation Systems, IIT Delhi, Apr. 24-26, 2002, pp. 682-686.
  • Saran V. H., Goel V. K., Ramji K., Vibrational Characteristics of Small Size Bias Ply Tyres, National Seminar on Vehicle Dynamics, Andhra University, Vishakhapatnam, Feb. 10-11,2003, pp.1–6.
  • Ramji K., Goel V. K., Deep, Kusum and Murali Krishna M., “Optimization of Three-Wheeled Motor Vehicle Subjected to Rough Pavement Suspfaces”, National Seminar on Vehicle Dynamics, Andhra University, Vishakhapatanam, Feb. 10-11, 2003, pp. 14-21.
  • Habbal, S. and Mehta N.K., Methodology for Exptraction of Protrusion Type Features and Interacting Depression Type Features for Prismatic Parts From their CAD Model, XVIII International Conf. on CAD / CAM, Robotics and Factories of the Future, Porto, Portugal, Jul. 03-05, 2002.
  • Mehta, N. K. and Hebbal S. Identification, Classification of Edges of Prismatic Parts & Application of their Interrelationship for Feature Recognition, International Conf. on Manufacturing ICM–2002, Dhaka Bangladesh, Aug. 09-12, 2002.
  • Hebbal S. and Mehta N. K., Data Systems for Machining Planning of Prismatic Parts, 13th DAAAM Int. Symposium: Intelligent Manufacturing & Automation: Learning from Nature, Vienna, Austria, Oct. 24-27,02.
  • Bhattacharya, T. K., and Bhutada, A. B., Analysis of PCM Storage in Non-circular Annuals, International Conference on New Millennium Alternative Energy Solutions for Sustainable Development, PSG Collage of Tech., Coimbatore, Jan. 17-19, 2003.
  • Khodary, Khaled, and Bhattacharya, T. K., Buoyant Flow in Vertical Channel with International Hot Square Cylinder, Second International Conf. on FMFP, IIT, Roorkee. Dec. 12-14, 2002.
  • Agarwal, K. N., Ravi Kumar, Lal S. N., Varma H.K. “Sweirl flow heat transfer during forced connections Condensation of R–22 in a horizontal tube fitted with segmented tapes”, Proc. 4th National Conf. on Thermal Splices, B.H.U., Feb. 2003.
  • Zaw Win, Gakkhar, R.P., Jain, S.C., Bhattacharya M., Noise, Enissiors, Fuel Economy Investigations on a small DI diesel Small Engine Technology Conference Proceedings, Society of Automotive Engineers of Japan Inc. Oct. 29-31, 2002.
  • Srivastava, A. and Khandelwal, R.S., “An Experimental Stuedy to enhance the Damping of Liquid in Moving Cylindrical Container, proceedings of 2nd International Conf. on Fluid Mechanics and Fluid Power, Dept. of Civil Engg. and Dept, of Mech. & Ind. Engg., IIT Roorkee, Dec. 12-14, 2002, pp. 520-25.
  • Arora, Navneet and Sharma, Abhay, “Three dimensional transient arc modeling for arc welding process and its application in automated welding system’, Proc. on International Conf. on Manufacturing (ICM 2002), Dhaka (Bangladesh), Aug., 2002.
  • Arora, Navneet and Kumar, Dinesh, “Stochastic behaviour and maintenance management of steam generation system”, Proc. of XXXV annual Conf. on Operations Research for Development (ICORD 2002), Chennai, Paper No. CC30, Dec. 27-30, 2002.
  • Singh, Pradeep K., Jain, Pramod K., & Jain, Satish C., ‘Optimal selection of design and manufacturing tolerances using genetic algorithm’ International conference on Simulation and Modeling (ASM2002), Jun. 25-28, 2002, Crete, Greece.
  • Singh, Pradeep K., Jain, Satish C., & Jain, Pramod K., ‘Optimal tolerance design in mechanical assemblies using genetic algorithms’, 13th International DAAAM Symposium, Oct. 25-28, 2002, Vienna, Austria.
  • Jain, Ajai, Singh, I.P., ‘An approach for batch scheduling with multiple process plans, 6th International Conference on engineering Design and automation (EDA 2002), Hawaii, Aug. 04-07, 2002.
  • Jain, P.K., Yamamoto, M., Fukuda, Y., & Fukuma, T., A data centric approach for manufacturing system design’, The 12th International Flexible Automation and Intelligent Manufacturing (FAIM-2002) conference, Jul. 15-17, 2002, Dresden, Germany.
  • Jain, P.K., et.al. Deadlock detection and resolution in AMS, National Conference on Advances in Manufacturing Systems, AMS-2003, Mar. 28-29, Jadavpur University, INDIA.
  • Jain, P.K., et.al. Buffer size optimization of adaptive assembly line, National Conference on Advances in Manufacturing Systems, AMS-2003, Mar. 28-29, Jadavpur University, INDIA.
  • Patnaik, L.N., Jain P.K. & Mehta, N.K., Re-configurable manufacturing systems (RMS): The future trend in manufacturing’, National Conference on Advances in Manufacturing Systems, AMS-2003, Mar. 28-29, Jadavpur University, INDIA.
  • Singh, Amol, Mehta, N.K. & Jain, P.K. Role of downtime in real time scheduling of unreliable machines, National Conference on Advances in Manufacturing Systems, AMS-2003, Mar. 28-29, Jadavpur, INDIA.
  • Singh N. Sharma, S.C. & Jain, S.C., The Influence of geometric shape of Recess on the Performance of Multi-Recess Hybrid Journal Bearing, International Conference on Industrial Iribology (ICIT-2001), Jamshedpur, Apr. 08-11, 2002.
  • Kumar, M., Vrat, P. and Shankar, R., A multi-objective interval programming approach for vendor selection problem in a supply chain, In the proceedings of Intl. Conf. On “e-manufacturing : an emerging need for 21st century world class enterprises”, 17-19 Nov. 2002, Bhopal, India, pp. 101-106. (Eds. Daga etal. Phoenix Pub. House, New Delhi), 2002.
  • Solimanpur, M., Vrat, P., and Shankar, R., Design of cellular manufacturing systems : A goal programming approach, International Conference on CAD, CAM, Robotics and Autonomous Factories, New Delhi, pp. 1-8, Aug. 2003.
  • Khanna, V.K., Vrat, P., Shankar, R., and Sahay, B.S., Comparative Usage of Quality Tools in Indian Automobile Sector : A Survey”, - Proceedings of the 8th International Conference on ISO 9000 and TQM at the Delta Centre Ville, Montreal, Canada Apr. 23-25, 2003).
  • Khanna, V.K., Vrat, P., and Sahay, B.S., TQM Practices in Indian Automobile Sector at Cross Road : A Survey, in : Change Management : Proceedings of the 7th International Conference on ISO 9000 and TQM, Ed. Ho, S.K.M. and Dalrymple, J.F., (RMIT University Melbourne, Australia, pp. 243-244, 2002.
  • Mishra Somnath, Deshmukh S.G. and Vrat, P., “Technological Forecasting : An Aid to Path Determination and Implementation in Defence, Management of R&D in the New Millennium” (Eds : Banwat etal) ; Proc. of Intl. Conf. on Management of R&D (ICMARD’ 2003), pp. 216-226, 2003.
  • Verma P., Deshmukh S.G., and Vrat P., Emissions in Transportation Sector : Impact of IT and Telecommunications Proc. of International Conference on e-manufacturing, Bhopal, pp. 413-421, 2002.
  • Seth N., Deshmukh S.G., and Vrat P., IT in Supply Chain : Opportunities and Challenges, Proc. of International Conf. on e-manufacturing an emerging need for 21st century, Bhopal, pp. 56-61, 2002.
  • Vrat, P., OR in Supply Chain Management, Proc. of APORS Conference, New Delhi, Dec. 2003,
  • Verma P., Deshmukh S.G. and Vrat P., Pollution Control and greenhouse gas mitigation in transport sector – A case for system dynamics study, Proc. of National Conference on Transportation Systems, New Delhi, pp. 162-172, 2002.
  • Vrat, P., Shankar, R., Tiwari, M.K., Srinivas, and Solimanpur, M., Transiently Chaotic Neural Network Approach for Transportation Systems : Status and Directions, IIT Delhi, New Delhi, India, 361-367, 2002.
 

2003-04 

  • Agrawal,K.N., Kumar,R., Kaushik, M.,  Compressor Response and Heat Transfer Characteristics of A Room Airconditioner Working With R-22 and R-134a, International Congress on Refrigeration,  Washington DC, August 17-22, 2003.
  • Akshay Diwedi and  Pradeep Kumar,  QFD in Service Sector – A Case Study, ISME Conference, December 30-31, 2003, IIT Roorkee
  • Alaknanda, Anand, R. S. and Pradeep Kumar, Comparative Evaluation of Edge Detection Techniques for Feature Extraction in Ultrasonic Images, International Conference on Systemic, Cybernetics, and Informatics (ICSCI 2004), Pentagram Research Center Pvt. Ltd, Hyderabad, February 12–15, pp. 337 – 341
  • Alok Chaube, Sahoo, P.K. and Solanki, S.C., Computational Investigation of Heat Transfer and Flow-field Characteristics in a 2D Rib Roughened Rectangular Duct T-31, Proceedings of Fluent CFD conference 2003 for India and South East Asia, Nov 18-20,2003 at Pune, India. 
  • Alok Chaube, Sahoo, P.K. and Solanki,S.C., Analysis of Heat Transfer Enhancement due to Artificial Roughness  TH-123, 13th National conference of Indian Society of Mechanical Engineers, Dec.29-31, 2003 at IIT Roorkee, India. 
  • Amol Singh, Mehta, N.K. and Jain, P.K., Selective approach for re-routing in the presence of machine breakdowns, Annals of DAAAM and 14th International DAAAM Symposium, Oct. 22-25, 2003, Vienna, Austria.
  • Amol Singh, Mehta, N.K. and Jain, P.K., Simulation study of real-time scheduling policies with machine break-down, 13th National Conference of ISME (ISME-2003), Dec. 30-31, 2003, INDIA.
  • Anand Shalini, Dahiya R.P. and Vrat Prem – Assessment of reenhouse Gas Emissions from Cement Industries in India – in Energy and Environment eds.  M. Emrankhan and M. Muzaffaral Hasan, Anaunaya Publishers, New Delhi, 2004, pp. 210-213. 
  • Anand Shalini, Vikash Talyan, R.P. Dahiya and Prem Vrat – Contribution of Indian Rice Fields to Green House Gas Emissions – in Energy and Environment, eds.  M. Erurankhan and M. Muzaffaral Hasan, Anaunaya Publishers, New Delhi, 2004, pp. 310-315.
  • Ashish Srivastava, Mishra, B.K. and Jain, S.C., Recent Developments in Deployable Inflated Space Structures, ISME, IIT Roorkee, 30-31 December 2003 
  • Balan, S., Pati, Rupesh, Vrat, Prem, Kumar, Pradeep (2004), Global Supply Chain Management: Challenges and Opportunities, 33rd International Conference on Computers & Industrial Engineering, Jeju Island, Korea, March 25-27, 2004.
  • Balan, S., Vrat, Prem, Kumar, Pradeep (2004), Reducing the Bullwhip Effect with Fuzzy Logic approach Second International conference on Logistics & Supply chain Management, PSG College of Technology Coimbatore.
  • Bhartiya, Sachin and Arora, Navneet, Effect of Process Parameters on Residual Stresses in Stainless Steel Weldments using GMAW, National Seminar on Advances in Welding & Fabrication, Bhopal from Nov. 5 –7, 2003.
  • Desale, G.R., Gandhi, B.K. and Jain, S.C., Visualization of Sand Particles Suspension in Cylindrical Water Pot using a Propeller,  Proc. 30th National Conference of Fluid Mechanics and Fluid Power, KNIT Suratkkal, Dec. 11-3, Suratkkal (Karnataka state), 2003, pp. 528-534.
  • Dinesh Kumar, and Niranjan M.S.,  A Heuristic for Optimization of Milling Parameters Using Circular Direction Search Method, INCARF-2003, IIT Delhi, Dec. 8-11,2003.
  • Ganesh Kumar, Bhattacharya, M. and Jain, S.C., Influence of Operating and Design Parameters on the Diesel Engine Noise and Emission,  Presented at XIII National Conference of ISME 2003, Dec. 30-31, 2003, Paper MD-052, pp. 
  • Girish Desale, Gandhi, B.K. and Jain, S.C., Suspension of Sand Particles in a Cylindrical Water Pot Due to Rotation of a Propeller, Proc. 30th National Conference on fluid Mechanics & Fluid Power, pp. 528-524, Dec. 11-13, 2003.
  • Gupta Puneet and Arora, Navneet, Heat Transient Modelling For Pulsed Laser Welding, National Seminar on Advances in Welding & Fabrication, Bhopal from Nov. 5 –7, 2003.
  • Gupta, K.K. and R. Kumar,  Pool Boiling of Refrigerants on a Horizontal Tube,  XII Indian Society of Mechanical Engineers Conference, Indian Institute of Technology, Roorkee, December 30-31, 2003
  • H. Singh and Pradeep Kumar, Cutting Force Optimization of Turned Parts by Taguchi’s Technique  ISME Conference, December 30-31, 2003, IIT Roorkee
  • Hari Saranya, Jadoun, R.S., Pradeep Kumar, Mishra, B.K. and Mehta, R.C.S., Investigation of the Effect of Process Parameters on the Oversize of Hole Drilled by Ultrasonic Machining,  INCARF,  IIT Delhi, 2003.
  • Harmesh Kansal, S. Singh and  Pradeep Kumar, Electric Discharge Machining with Additives: A New Way of Improving the Performance ETMS – 2004, SLIET, Longowal, Jan 18–19, pp. 17–21.
  • Harmesh Kansal, S. Singh and Pradeep Kumar, State-of-Art Concerning Powder Mixed EDM International Conference on Emerging Technologies, ICET – 2003, KIIT, Bhubaneshwar, Dec. 19 –21. 
  • Hebbal, S. and Mehta, N.K., Data management issue related to the development of  CAPP systems Pro. National Conference on Recent Developments in Mechanical Engineering TIET, Patiala, 31 Oct – 1 Nov., 2003.
  • Hebbal, S. and Mehta, N.K., Grouping of features for the development of set-up plans for prismatic parts, Annals of DAAAM and 14th International DAAAM  Symposium Oct. 22-25,2003, Vienna, Austria.
  • Jadoun, R.S., Mehta, N.K., Mehta, R.C.S. and  Pradeep Kumar, Development of Mathematical Model of Thrust for Rock-Drilling Using PDC Bits by Factorial Design, ISME Conference, December 30-31, 2003, IIT Roorkee
  • Jain, P.K., Reddy, Modelling and Performance Analysis of Re-configurable Assembly Line, CIRP 2nd International Conference on Reconfigurable Manufacturing, August 20-21, 2003, The College of Engineering, University of Michigan, Ann Arbor, USA.
  • Joshi D., Tiwari P. C., and D. Kumar,  Design and Development of DSS for a Crushing Unit Using Genetic Algorithm, APORS-2003, IIT Delhi, Dec. 2003.
  • Kansal Harmesh, Singh, S., Kumar, P. (2003), Investigation on the Influence of Machining Parameters when Machining AISI-52100, Die Steel Using EDM National Conference of Mechanical Engineering (NCME – 2003) TIET Patiala, Oct., pp 615 – 618.
  • Kansal Harmesh, Singh, S., Kumar, P. (2004), Statistical Optimization of Powder Mixed Electric Discharge Machining (PMEDM) Using taguchi Methods, IIIrd International Conference on Advances on Production Engineering (APE-2004) June 17 – 19, Warsaw, Poland. 
  • Kumar M., Vrat Prem and Shankar R., 2004 – Vendor’s Quota Allocation in a Supply Chain using Multiobjective Stochastic Model in Operation Research and its  Applications : Recent  Trends, eds. M.R. Rao and M.C. Puri (Proc. of APORS-2003), Vol.II, pp. 347-353, Allied Publishers, New Delhi.
  • Kumar, R., Agrawal, K.N., Mohanty, B., and  Varma, H.K.,  An Experimental Study For The Enhanced Condensation Rate of R-134a Vapor on Single Horizontal Integral-Fin Tubes, 3rd International Symposium on Heat Transfer Enhancement and Energy Conservation, Guangzhou, China January 12-15, 2004.
  • Misra, R. D., Sahoo, P.K., and Gupta, A., Exergoeconomic Evaluation Vapour Compression Refrigeration System, International Conference on Emerging Technologies in Air Conditioning and Refrigeration at New Delhi, 10-12th Sept, 2003.
  • Mukesh Kumar and Arora, Navneet,  Determination of Stress Intensity Factors for Spot Welded Specimens, National Seminar on Advances in Welding & Fabrication, Bhopal from Nov. 5 –7, 2003. 
  • Muluwork, K.B., Saini, J.S. and Solanki, S.C., Experimental Investigation of Heat Transfer and Friction Characteristics in Flat Rectangular Duct with V-Shaped Staggered Discrete Ribs,  Proc. 17th National Heat & Mass Transfer (ISHMT/ASME) Conference HMT – 2004 – C – 079, IGCAR, Kalpakkam, Jan. 2004.
  • Pandey, N.D., Shan, H.S. and T. Mohandas, Laser Drilling Characteristics of Nickel Base Superalloy Proceedings National Conference on Advanced Manufacturing & Robotics, January 10-11, 2004, Durgapur, pp.10.
  • Pandey, N.D., Shan, H.S. and T. Mohandas, Precision of Laser Drilled Holes: Effect of Laser Focusing Proceedings 3rd National Conference on Precision Engineering, COPEN  2003-04, December 19-20, 2003, Bangalore, pp 149-156.
  • Pandey, N.D., Shan, H.S. and T. Mohandas, Quality concept in laser drilled holes for cooling of aero-engine components Paper to be presented at All India Manufacturing Technology Conference, Vellore, December 10-12, 2004.  
  • Pati Rupesh K., Balan S., Vrat Prem and Pradeep Kumar, Application of Supply Chain Management to Indian Paper Sector; Proceedings of XIII National Conference of Indian Society of Mech. Engineers, Dec. 30-31, 2003, IIT Roorkee, PE-056, pp.1-8. (CD-ROM).
  • Patnaik, L.N., Jain, P.K. and Mehta, N.K., A system level design methodology for Re-configurable manufacturing system, 13th National Conference of ISME (ISME-2003), Dec. 30-31, 2003, INDIA.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K., A new cell design heuristic using operation sequence of parts, International Conference on CAD, CAM, Robotics and Autonomous Factories (INCARF – 2003), Aug. 11-13, IIT Delhi, INDIA.
  • Pattanaik, L. N., Jain, P. K. and Mehta, N. K., A new similarity-coefficient based heuristic for cell design, Annals of DAAAM and 14th International DAAAM Symposium, Oct. 22-25, 2003, Vienna, Austria.
  • Prem Vrat – OR in Supply Chain Management, Proc. of 6th APORS Conference, Dec. 8-11, 2003, New Delhi.  Invited paper delivered in plenary session, pp.1-11.
  • Qayoum and Saini, J.S.,  Optimization of Artificially Roughened Solar Air Heater Using Genetic Algorithms, Proc. National Heat & Mass Transfer (ISHMAT/ASME) Conference HMT – 2004 - C128, IGCAR, Kalpakkam, Jan. 2004.
  • Rajeev Kumar, Mishra, B.K. and Jain, S.C., Smart Material and Structure Review, Presented at XIII National Conference of ISME 2003, Dec. 30-31, 2003, Paper MD-067, pp. 47.
  • Rajeev Kumar, Srivastava, Ashish, Mishra, B.K. and Jain, S.C., Finite Element Formulation and Active Vibration Control using Real Code Genetic Algorithm, Proc. Intern. Conf. on Mechanical Engineering 2003 (ICME 2003), 26-28 December 2003, Dhaka, Bangladesh, Paper No. ICME2003-ACS-03/106.
  • S. Kumar, P. Kumar and Shan, H.S.,  Evaporative pattern casting process of sand molding using vacuum Proceedings XIII National Conference of Indian Society of Mechanical Engineers, IIT-Roorkee, Dec. 30-31, 2003, Paper PE-085.
  • S. Singh, Shan, H.S, and Pradeep Kumar, A Study of Micro-Machining by flow of Magnetic abrasives – Taguchi Approach, INCARF – 2003, IIT Delhi
  • S.Balan, Prem Vrat and Pradeep Kumar, Global Supply Chain Management: Challenges and Opportunities, 33rd International Conference on Computers & Industrial Engineering, Jeju Island, Korea, March 25-27, 2004.
  • Sahoo, P.K., .S. Chand, and Misra, R. D., Thermoeconomic Optimization of a Cogeneration System Using Evolutionary Programming, Presented at the First International Exergy, Energy, and Environment Symposium, Ege University, Izmir, Turkey 13-17th July, 2003, pp 281-86.
  • Saini, J.S., Use of Artificial Roughness for Enhancing the Performance of Solar Air Heaters, a Keynote Paper, Proc. National Heat & Mass Transfer (ISHMT/ASME) Conference HMT-2004-K13, IGCAR, Kalapakkam, Jan. 2004.
  • Saraswat, Manish, Arora, Naveneet and Gupta, S.R., Aluminum Welds in Horizontal Position With Gas Metal Arc Welding, ISME 2003, Paper No. 052, December 30-31, 2003, IIT Roorkee.
  • Sekhar, J. Bala Chandra, Jadoun, R.S, Pradeep Kumar, Mishra, B.K. and Mehta, R.C.S., Stress Analysis in Ultrasonic Machining using FEM, INCARF,  IIT Delhi, 2003
  • Sen, M. and Shan, H.S.,  Flexibility in Cellular Layouts  Proceedings National Conference on World Class Manufacturing, May 7-9, 2003, Coimbatore, pp. 348-353.
  • Sen, M. and Shan, H.S., Comparative study of small hole drilling techniques in super alloys Proceedings XIII National Conference of Indian Society of Mechanical Engineers, IIT-Roorkee, Dec. 30-31, 2003, Paper PE-033.
  • Singh, R., Saini,  R.P. and Saini, J.S., Thermohydraulic Performance of Packed Bed Energy Storage System for Solar Air Heaters, XII AsmE Conference, Roorkee, Dec. 30-31, 2003. 
  • Sharma Satish C., Nagaraju T. and Jain S.C., Performance of Orifice Compensated Hole Entry Journal Bearing System Considering Surface Roughness and Thermal Effects, Presented at Joint STLE/ASME Tribology Conference, Florida, Oct. 26-29, 2003. 
  • Singh ,S., Shan, H.S. and P. Kumar, Multi-Response optimization of magnetic abrasive flow machining – A case study Proceedings XIII National Conference of Indian Society of Mechanical Engineers, IIT-Roorkee, Dec. 30-31, 2003, Paper PE-061.
  • Singh N., Sharma Satish C., and Jain S.C., Performance of a Constant Flow Valve Compensated Multirecess Hydrostatic / Hybrid Journal Bearing of Different Recess Geometries, Proc. National Conference on Recent Development in Mechanical Engineering, TIET, Patiala, Oct. 31 – Nov. 1, 2003 pp. 264-270.
  • Singh P.K., Jain P.K. and Jain S.C.,  Manufacturing Cost Models in Tolerance Design of Mechanical Assemblies,  Proc. Int. Conf. CAD, CAM, Robotics and Autonomous Factories (INCARF – 2003), IIT Delhi, Aug. 13-18, 2003.
  • Singh P.K., Jain S.C., and Jain P.K.,  Optimal Tolerance Allocation of Mechanical Assemblies with Alternative Manufacturing Processes (Machines), Annals DAAAM and Proceedings of 14th International DAAAM Symposium, Vienna, Austria, pp. 419-420.
  • Singh, Hari,  Pradeep Kumar, and Singh, I. P., Investigation of the Effect of Process Parameters on Power Consumption for Turned Parts Through RSM, INCARF – 2003 , IIT Delhi 
  • Singh, K.M. and Williams, J.J.R., A Friction Domain Multigrid Preconditioner for the Solution of Poisson Equation in Complex Geometry, XIII National conference of Indian Society of mechanical Engineers (ISME – 2003), IIT Roorkee, Dec. 30-31, Roorkee, 10 pages (CD Book Paper No. TH – 122.)
  • Singh, K.M. and Williams, J.J.R., Direct Numerical Simulation of Flow over a Rough Bed, International symposium on shallow flows, Delft, Holland, June 16-18th, 2003, pp. 45-50.
  • Singh, P.K., Jain, P.K., and Jain, S.C., Manufacturing cost models in tolerance design of mechanical assemblies, International Conference on CAD, CAM, Robotics and Autonomous Factories (INCARF – 2003), Aug. 11-13, IIT Delhi, INDIA.
  • Singh, Pradeep K., Jain, Pramod K., Jain, Satish C., An Algorithm for Tolerance Design of Mechanical Assemblies with Interrelated dimensional Chains Considering Process Bounds, International Conference of Production Research (ICPR - 2003), Virginia, USA, Aug. 3-7.
  • Singh, Rajinder, Gupta, S.R., and Arora, Navneet, Influence of Welding Parameters on Characteristics of Resistance Spot Aluminium Welds, ISME 2003, Paper No. 062, December 30-31, 2003, IIT Roorkee.
  • Singh, S. P., Shan, H.S., Kumar, P., (2004) Multi-Response Optimization of Magnetic Abrasive Flow Machining through Taguchi Method and Utility Concept. 3rd Int. Conf. on Advanced Manufacturing Technology, 11-13 May 2004, Kualalumpur, Malaysia
  • Singh, S., Shan, H. S., Kumar, P. (2004), Multi -Response Optimization of Magnetic Abrasive Flow Machining through taguchi technique and Utility Concept, 4th International Conference on Manufacturing Technology, International Islamic University Malaysia, Kuala Lumpur, May 11-13, paper no. G4_36.
  • Singh,S.K, R. Kumar, and Mohanty,B.,  Condensation Of Steam Over A Vertical Grid of Horizontal Integral-Fin Tubes, 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics,  Zambia, June 23-26 2003.
  • Srivastava Ritesh, Gupta S.R. and Vaze K.K., Fracture of Assessment of Bi-Metallic Welds, XIII National Conference of ISME, Dec. 2003, Roorkee, Paper No. PE – 112.
  • Srivastava, Ashish, Mishra, B.K. and Jain, S.C.,  Smart Material and Structure Review  Presented at XIII National Conference of ISME 2003, Dec. 30-31, 2003, Paper MD-068, pp. 48.
  • Srivastava, Asishsh and Khandelwal, R.S., Enhancing the Damping of Liquid in Multicompartment Cylindrical Container, XIII National Conference of ISME, Roorkee, Paper No. MD – 071. 
  • Thakur, N.S., Saini, J.S., and Solanki, S.C., Thermohydraulic Optimization of Packed bed Solar Air Heater, Proc. 17th National Heat & Mass Transfer (ISHMT/ASME) Conference HMT–2004 – C140, IGCAR, Kalpakkam, Jan. 2004.
  • Tiwari, P.C., Sharma, M. and Dinesh Kumar,  Quality Management System – Planning and Implementations, National Conference on Ad. Material and Manufacturing Technique, JINTU & CITD, Hyderabad, March 8-9, 2004.
  • Walia, R.S., Shan H.S. and P. Kumar, Enhancing the material removal in EDM by applying the ultransonic vibration  Proceedings XIII National Conference of Indian Society of Mechanical Engineers, IIT-Roorkee, Dec. 30-31, 2003, Paper PE-084.
  • Walia, R.S., Shan, H. S. and Pradeep Kumar, Improving EDM Process Efficiency by Ultrasonic Vibrations  National Symposium on Ultrasonic, Nov. 3-5 2003, Ultrasonic Society of India, New Delhi and GND university Amritsar.
  • Walia, Ravinder, Shan, H. S., Kumar, P. (2004), Analyzing The Total Number Of Dynamic Active Abrasive Grains In Abrasive Flow Machining Process, National Conference on State of the Art of Technologies in Mechanical Engineering, June 29th and 30th, Hyderabad.
  • Yadav, Arora, N., Gandhi, B.K., Nath, A.K. and Paul, C.P., SS316L Powder Cladding on Stuctural Steel using Continuous Wave CO2 Laser, Proc. 13th National Conference of ISME, IIT Roorke, December 30-31, Roorkee, 2003, Paper No. PE-063. 

2004-05 

  • A. Felix Regin, Solanki S.C. and Saini J.S., Analysis of Non-Isothermal Solidification of PCM within A Cylindrical Capsule In A Latent Heat Thermal Energy Storage System, Proc. Ink. Congress on Renewable Energy (ICORE-2005) Pune, Jan. 20-22, 2005.
  • Anand, Alaknanda, Kumar P.R.S.,  Comparative Evaluation of Edge Detection Techniques for Feature Extraction in Ultrasonic Images, International Conference on Systemic, Cybernetics, and Informatics (ICSCI 2004), Pentagram Research Center Pvt. Ltd., Hyderabad, pp 337-341, 2004.
  • Awasthi R.K., Jain S.C. and Sharma Satish C., Code Development for the Analysis of a Finite Journal Bearing System using Matlab, Proceedings of International Conference on Industrial Tribology, ICIT – 04, held at Mumbai, , pp. 501 – 507, Dec. 15 – 18, 2004.
  • Awasthi R.K., Jain S.C. and Sharma Satish C.,, Influence of Grid on Agerage Flow Factors for Isotropic Surface Roughness in Hydrodynamic Lubrication, Proceedings of International Conference on Industrial Tribology, ICIT – 04, held at Mumbai, pp. 337 – 343, Dec. 15–18, 2004.
  • Balan, S., Vrat Prem and Pradeep Kumar, "Reducing Bullwhip Effect Fuzzy logic approach", Proc. of International conference on logistics and supply chain management, P.S.G. College of Tech, Coimbatore, 3rd Aug.2004.
  • Balan, S., Vrat Prem and Pradeep Kumar, "The role of supply chain on India’s   development index: An analytical approach", 37th Annual ORSI Convention, IIM Ahmedabad, Jan.8-11, 2005.
  • Balan, S., Vrat Prem and Pradeep Kumar, "Total Quality in Supply Chain Management ", Proc. of International conference on supply chain management, NITIE, Mumbai, 2004.
  • Balan, S., Vrat Prem and Pradeep Kumar, “Information distortion in a supply chain and its mitigation of a MIMO model using ANN”, International conference on soft computing manufacturing systems, KIIT, (Proc. of ICCEMS-2004), Allied Publishers, New Delhi. pp.311-320.
  • Balan, S., Vrat, Prem, Kumar, Pradeep (2004), Information Distortion in A Supply Chain And Its Mitigation of a Mimo Model using Soft Computing Approach, International Conference on Emerging Technologies 2004, (ICET 2004), KIIT, Orissa, Dec.  22-24, 2004.
  • Balan, S., Vrat, Prem, Kumar, Pradeep, Shan, H.S., Total Quality in Supply Chain Management, VIII Annual International Conference, Dec. 17-20, 2004, NITIE, Bombay, 2004.
  • Balan, S., Vrat, Prem, Kumar, Pradeep, The Role of Supply Chain on India’s Development Index: An Analytical Approach, ORSI Convention, IIM Ahemdabad, January 8 – 11, 2005.
  • Chaube Alok, Sahoo P.K. and Solanki S.C., Computational Analysis of Heat Transfer Enhancement due to Rectangular ribs in a Turbulent duct flow, Proceedings, International Congress on Renewable Energy, pp 250-261, 2005.
  • Chaube, Alok, Sahoo, P.K. and Solanki S.C. Computational Analysis of Heat Transfer Enhancement Due to Rectangular Ribs in a Turbulent Duct. The 5th International Bi-Annual ASME/JSME Conference at San Diego, United States, pp 93-99, July 25-29, 2004
  • Dave Komal G. and Jain P.K., An emerging need to develop organization through business process reengineering’, VIII Annual International Conference of the Society of Operations Management, NITIE, India, Dec. 17-20, 2004,
  • Desale, G.R., Gandhi, B.K. and Jain, S.C., Suspension of sand particles in a cylindrical tank with a pitched turbine blade propeller: Application to Slurry pot tester 31st National Conference on Fluid Mechanics 895, Kolkata, India, 16018 Dec. 2004 and Fluid Power, 890-895.
  • Gandhi B.K. and Bharani S., Pressure Distribution along the Casing of a Centrifugal Pump and its Effect on Bearing Temperature Distribution: A maintenance Perspective ASME International Mechanical Engineering Congress. The Winter Annual Meeting of ASME (WAM), California (USA), Nov. 2004.
  • Garg Naveen, Bhattacharya M. and Jain S.C., Reducing Diesel Engine Noise, Emissions & Fuel Consumption Using Pilit Injection System National Symposium on Acoustics (NSA-2004), Mysore, Nov. 25-28, 2004.
  • Goel D.B., Sharma Neeraj K., Bai J.J. and Arora Navneet, Effect pf Surface Coatings on erosion behaviour of hydro-turbine steels. The Journals of CPRI, Vol.2, (1), pp.39-50, Mar. 2005.
  • Gupta Dheeraj, Gandhi B.K., Gupta S.R., Paul C.P. and Nath A.K., Hardfacing Of AISI 304L Stainless Steel Using High Power CO Laser, Proceedings of International Welding Conference, 18020 February 2005, Mumbai, India.
  • Gupta Dheeraj, Gandhi Bhupendra K., Gupta S.R., Paul C.P. and Nath A.K., Hardfacing of AISI 304L stainless steel using high power CO Laser. IIW International Congress 2005, , Mumbai, Paper No. IWA 105, 16th – 19th February 2005.
  • Hamid Abdulhaqq A., Ghosh P.K., Jain S.C. and Ray S., Wear Behavior of Cast Composite In-Situ Al (MnAl O (MnO), 4th China International Symposium on Tribology, Xi’an China, pp 235-39, Nov. 8-11, 2004.
  • Hebbal, S. & Mehta, N.K. ‘Automated machining planning for the development of CAPP system for prismatic parts’, 21ST AIMTDR Conf., Vellore Institute of Technology, Vellore, Dec. 20-22,2004.
  • Jain Ajai, Jain P.K., Singh I.P., 2004, Flexible Process Plans: Are They Always Suitable in FMS 9th International Symposium on Manufacturing and Applications (ISOMA 2004), Seville, Spain, June 28 – Jul. 1.
  • Jain P.K., Tafesse G., Jain S.C., ‘On Manufacturability Evaluation of Cylindrical Machined Parts with Non Axi-Symmetric Features’, International CAD Conference and Exhibition, CAD-04, Dust Resort, Pattaya Beach, Thailand, May 24-28, 2004.
  • Kansal Harmesh, Singh, S., Kumar, P,  A Study on the Machining Parameters Optimization of Powder Mixed EDM (PMEDM) 8th International Conference on Production Engineering Design and Control (PEDAC – 2004), Egypt, pp. 211 – 221, Dec. 27-29.
  • Kansal Harmesh, Singh, S., Kumar, Pradeep. Optimization of Powder Mixed Electrical Discharge Machining by Response Surface Methodology, 21st AIMTDR Conference, Vellore, Narosa Publishing House, Dec. 04, pp 390 – 396.
  • Kumar Dinesh, Fuzzy liquistic modelling to select maintenance strategy in Process industries, Int. Conf. of Society of Operational Management, NITIE Mumbai, 17-20 Dec. 2004.
  • Kumar Dinesh, Fuzzy logic Methodology to Prioritize failure causes in FMEA, Int. Cont. on Emerging Technologies ICET – 2004, KIIT Bhubneswar 17-20 Dec. 2004.
  • Kumar Dinesh, Optimization of turning parameters using circular direction search method, VIII Annual int. Conf. of Society of operational Management NITIE Mumbai, Dec. 2004.
  • Kumar Rajeev, Kumar Dinesh and  Kumar Pradeep, Fuzzy Logic Methodology to prioritize Failure causes in FMEA, International Conference on Emerging Technologies 2004, (ICET 2004), Dec, 22-24, 2004, KIIT, Orissa.
  • Kumar Sudhir, Kumar Pradeep and Shan, H.S., (2005) Performance Study of Zircon Flour in Combination with Filler Material in EPC Process, AMTEG – 2005 Pune, Pune Institute of Engineering and Technology, pp. 144 – 149, Jan 20–22.
  • Kumar Sudhir., Kumar, Pradeep, Shan H.S.,  Optimization of Process Parameters on Mold Hardness in Evaporative Pattern Casting Process by Using the Taguchi Method, Emerging Trends in Mechanical Engineering Conference, NIT, Kurukshetra, pp. 103-109, 2005.
  • Kumar, Rajeev, Kumar Dinesh, Kumar, Pradeep, Fuzzy Linguistic Modelling to Sleect maintenance Strategy in Process Industry, VIII Annual International Conference, Society of Operations Management, Dec, 17-20, NITIE, Bombay, 2004.
  • Kumar, Sudhir, Kumar, Pradeep., Shan, H.S., Effect of Process Parameters on Tensile Strength of Al-7% Si Alloy Castings Produced by EPC Process, International Conference of Industrial And Applied mathematics, Jamia Milia Islamia, New Delhi, Dec., 2004.
  • Mishra, B.K. and Jain S.C., Active Vibration Control of Smart Paraboloidal Shell, ICTACEM, IIT, Kharagpur, 28-30, Dec. 2004.
  • Pati, R., Vrat, Prem, Kumar, Pradeep, Recovery Analysis of Reverse Supply Chain in a Paper Industry 15th International DAAAM Symposium, Nov 3 – 6, Vienna, 2004.
  • Patil Vinod, Jain S.C., Sharma Satish C. and Gautam Rakesh Kumar, Simulated Study of Sliding Wear, Proceedings of International Conference on Industrial Tribology, ICIT – 04, held at Mumbai, Dec. 15–18, 2004, pp. 442, 447.
  • Rao M. Baskar, Sharma Satish C., Jain S.C. and Awasthi R.K., Influence of Geometric Shape of Recess on the Performance of a Six – Pocket Hybrid Journal Bearing System, Proceedings of International Conference of Industrial Tribology, ICIT – 04, held at Mumbai, , pp. 328 – 336, Dec. 15 – 18, 2004.
  • Sahoo, P.K., and Misra, R. D., Thermoeconomic Optimization of a Solar Assisted Vapor Absorption System The International conference on Emerging Technology, 22-24th Dec., 2004, KIIT, Bhubaneswar, Orissa, pp.213-225, 2004.
  • Saran, V.H., and Goel, V.K., ‘Ride Behaviour of Three-Wheeled Vehicle – Model and Optimization, VETOMAC – 3 and ACSIM – 2004 International Conference, New Delhi, Dec. 6-9, 2004.
  • Sebm N., Kumar, A., and Shan, H.S., Modeling of electro jet drilling process using FEM Proceedings International Conference on Manufacturing Automation Advanced Design and Manufacturing in Global Competition ICMA-2004, Oct. 26-29, 2004Wuhan, China, pp 435-442.
  • Sehegal Satbir, R.P. Gakkhar, Navneet Kaur  Neural Network based virtual sensing for monitoring Internal Combustion Engines National Conference on Recent Trends in Control Systems (RTCS-2004) BBSBEC Fategarh  shalub May 21-22, 2004.
  • Sen, M., and Shan, H.S., Experimental investigation into electro jet drilling Proceedings 1st International Conference on Manufacturing and Management, GCMM – 2004, Vellore, Dec. 8-10, 2004, pp. 496-502.
  • Sen, M., and Shan, H.S.,. Response Surface Analysis of Electro Jet Drilled Holes, Proceedings 21st All India Manufacturing Technology, Design and Research Conference, Vellore, Dec. 20-22, 2004, pp. 168-173.
  • Sen, M., and Shan, H.S.., Two Dimensional Finite Element Modeling Of Electro Jet Drilling Process. Proceedings 21st All India Manufacturing Technology, Design and Research Conference, Vellore, Dec. 20-22, 2004, pp. 596-601.
  • Sen, M., Purohit, S.S. and Shan, H.S., Optimization of Machining Conditions in Electro-Jet Drilling Using Genetic Algorithm, Proceedings 4th International DAAAM Conference, Tallinn, Estonia, , pp 155-158, Apr. 29-30, 2004.
  • Shankar, R., Vrat, P., Khanna, V.K. and Sahay, B.S., “Six Sigma Practices: Some observations”, Proc. of National Seminar on Six Sigma for Forge and Foundry Industries, Ranchi, April 10-11, 2004, pp. 40-45.
  • Sharma Abhay, Arora Navneet, Gupta S.R. Three Dimensional Transient Heat Transfer Modeling of Submerged Twin Arc Welding Process. Welding and Joining 2005 Frontiers of Materials Joining, ISRAEL, pp. 222-230, January 25-28, 2005.
  • Sharma Abhay, Arora Navneet, Gupta S.R.. Simulation of Behaviors of Leading and trailing Arcs during Submerged Twin Arc Welding Process. IIW International Congress 2005, Mumbai, Paper No. IWA 132, 16th – 19th February 2005.
  • Sharma Neeraj K., Arora Navneet and Goel D.B., Erosion Behavior of Co-based Stelite Coating, Proc. Of All India Seminar on Engineering Trends is surface Engineering, VLBJCET, Kovaipudur, Coimbatore, Jul. 1-2, 2004.
  • Shrivastava, A., Pandey, N.D. and Shan, H.S., ‘Optimization of Laser Drilling Process by Taguchi Method Proceedings 4th International Conference on Laser Assisted Net Shape Engineering (LANE 2004), Erlanger, Germany, pp. 979 – 990, Sep. 21-24, 2004.
  • Singh Ranjit, Saini J.S. and Saini R.P., Performance of packed bed storage system having bricks as storage material, Proc. Int. Congress on Renewable Energy (ICORE – 2005), Pune, Jan 20 – 22, 2005.
  • Singh Ranjit, Saini J.S. and Saini R.P., Performance of packed bed storage having large  sized elements of spherical and cubical shape, Proc. 8th Punjab Science Congress, Punjabi Univ., Patiala, Feb. 7 – 9, 2005. 
  • Singh S, Shan H.S., Kumar, Pradeep. Influence of Magnetic Assistance to Abrasive Media in Abrasive Flow Machining International Conference on Manufacturing and Management- (GCMM-2004), Vellore Institute of Technology, Vellore, Dec. 8010, pp. 503-507, Sep. 21-24, 2004.
  • Singh, A., Mehta N.K., and Jain P.K.,  A Multi Criteria Approach for Dynamic Scheduling, The 15th International Daaam Symposium on Intelligent Manufacturing & Automation: Globalization – Technology – Men – Nature’, Vienna, Austria, 3–6 Nov. 2004.
  • Singh, A., Mehta, N.K., and Jain, P.K., Scheduling with Selective Rerouting in Manufacturing System, 34th International MATADOR Conference, 7th – 9th Jul., UMIST, Manchester, UK.
  • Singh, H., Kumar, Pradeep. Optimizing Cutting Parameters for Optimal Feed Force for Turned Parts through Taguchi Technique, The Int. Conf. on Manufacturing and Management – 2004 (GCMM – 2004), V I T Vellore, Tamil Nadu, Dec. 8–10, 2004.
  • Singh, K.M., Sandham, N.D. and Williams, J.J.R., Flow Over a Rough Bed, UK Turbulence Consortium Workshop, Beaulieu, New Forest, UK, Sep. 22-23, 2004.
  • Singh, P.K., Jain, S.C., and Jain, P.K. 2004, Concurrent Optimal Design of Nominal Dimensions and Tolerances Considering Alternative Manufacturing Processes (Machines) CAD-04, Dusit Resort, Pattaya Beach, Thailand, May 24-28, 2004.
  • Singh, S., and Shan, H.S., Characterization of Surfaces Produced by Abrasive Flow Machining Proceedings 3rd International Conference on Advanced Manufacturing Technology, Kuala Lumpur, Malaysia. Paper No. G4-023, May 11-13, 2004.
  • Vrat, Prem “Faculty Development for Excellence in Higher Education – Issues,  Challenges and Opportunities” in “Issues in Higher Education” Ed. K. Venkatasubramanian, ICFAI University Press, Hyderabad, 2004.
  • Walia R.S., Shan H.S., Kumar, Pradeep, Modeling of Media used in Centrifugal Force Assisted Abrasive Flow Machining Process using ANSYS 7.0, Emerging Trends in Mechanical Engineering Conference, NIT, Kurukshetra, pp. 70-74, 2005.
  • Walia, Ravinder, Shan, H.S., Kumar, Pradeep. Effect of providing a Rotating Rod Inside the Hollow Cylindrical Work piece on the Material Removal in AFM, 21st AIMTDR Conference, Vellore, Narosa Publishing House, Dec. 04, pp 143 – 148, 2004.
  • Walia, Ravinder, Shan, H.S., Kumar, Pradeep.  Simulation  of  the  path  of  an Abrasive Particle in Centrifugal Assisted Abrasive Flow Machining Process, AMTEG – 2005 Pune, Pune Institute of Engineering and Technology,  Vol. 22, pp. 300–304, 2005.
  • Williams, J.J.R. and Singh, K.M., Structure of the Turbulent Flow Over a Rough Bed. The 6th International Conference on Hydroscience and Engineering (ICHF-2004), Brisbane, Australia, May 30–June 3, 2004.
 
 

2005-06 
 

  • Agarwal, A., Singh, H. and Kumar, P., (2005), Effect of Various Independent Factors on Surface Roughness and Cutting Force in CNC Machining of P20 Steel – An Experimental Study, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Awashti, R.K., Sharma, S. C.,  Jain, S.C., Effect of Grid Size on Hydroynamic Journal Bearing Performance, Proceedings of the Conference on Computer Aided Design and Manufacturing: A Global Perspective MED, TIET, Patiala, Apr. 8-9, 2005.
  • Awasthi, R.K.. Sharma, S. C. and Jain, S.C. A Parametric Study on The Performance of Hole-Entry Hybrid Worn Journal Bearing System, Proc. National Conference on Advances in Mechanical Engineering (AIME-2006) held at Jamia Milia Islamia, New Delhi, pp. 9-20, Jan. 20-21, 2006.
  • Balan, S., Vrat, P. and Kumar, P., Analyzing Global Supply Chain using System Dynamics Simulation model, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Balan, S., Vrat, P. and Kumar, P., Risk Analysis in a Global Supply Chain Using System Dynamics Approach, International Conference on Logistics and Supply Chain Management, 5-7 Jan., 2006, Hong Kong, 2006.
  • Baskar., S., Gakkhar, R.P. and  Mohanty, B., Ignition Studies of a Fuel Droplet, Proceeding to International Conference of Resources & Energy Security. Council of Power Utilities New Delhi., Feb 2006 pp. 244-255. 
  • Baskar., S., Gakkhar, R.P. and Mohanty, B., Ignition of a fuel droplet in a hot exidizing atmosphere. Proceedings of the 19th National Conference on IC Engine and Combustion, Dec. 21-23, 2005 pp. 363-367.
  • Chibber, R., Navneet, A.,  Gupta, S.R. and Dutta B.K., ‘The problems plaguing the use of bimetallic welds in nuclear reactors’, Proc. of 14th ISME International Conference on Mechanical Engineering in Knowledge Age, Delhi College of Engineering, New Delhi, Dec. 12-14, 2005.
  • Chibber, R., Navneet, A., Gupta S.R. and Dutta B.K., ‘The use of Micromechanical modeling to assess the structural integrity assessment issues in bimetallic steel welds’, Proc. of International Conference on Advances in Materials Processing, (ICAMMP-2006), IIT Kharagpur, pp. 700-706, 3-5 Feb., 2006.
  • Desale, G R.,  Gandhi, B. K. and Jain, S. C., Effect of physical properties of solid particle on erosion wear of ductile material Accepted for publication in the proceedings of World Tribology Congress III, Washington (USA), Sep. 12-16, 2005. 
  • Deshale, G., Gandhi, B.K. and Jain, S.C., Improvement in the Design of a Pot Tester to Simulate Erosion Wear due to Solid – Liquid Mixture, 15th International Conference on Wear of Materials, SAN DIEGO (USA), Apr. 24-28, 2005.
  • Dwivedi, D.K., Influence of Heat Input on Microstructure and Wear Behavior of Fe Base overlays Deposited on C Steel. Presented at NMD-ATM 2005 held on Nov. 15-16, 2005 at IIT Madras, Chennai.  
  • Felix Region, A., Solanki, S.C. and Saini J.S., Thermal performance analysis of phase charge material capsules, Proc. Int. Solar Energy Conference (ASME – ISEC - 2005), Florida, 6-12 Aug., 2005.
  • Felix Region, A., Solanki, S.C. and Saini, J.S., Solidification of phase charge material inside a cylindrical capsule, Proc. 7th ISHMT – ASME & 18th National Conference on Heat & Mass Transfer, IIT Guwahati, Jan 4-6, 2006.
  • Gandhi, B. K., Seshadri, V. and Singh, S. N., Performance characteristics of the centrifugal slurry pump handling ash slurries at high concentrations, Proc. International Congress on Fly ash INDIA,  Dec. 2005, DST New Delhi, 2005.
  • Hamid, A. A., Ghosh, P.K., Jain, S.C. and Ray, S., Influence of Particle Content and Porosity on the Dry Sliding Wear Behaviour of Cast In-Situ Al(Ti)- Al2O3 (TiO2) Composites ASME- World Tribology Congress – III (2005) Washington Hilton (USA), Sep. 12-16, 2005.
  • Jain, P.K. and Gupta, V. K., 2005, Solving Job Shop Layout Problem using Ant Colony Optimisation Technique, 2005 IEEE International Conference on Systems, Man, and Cybernatics (SMC’05), Oct. 10-12, Hawaii, USA.
  • Jamawal, P. and Shan, H.S., Prediction of Performance Characteristics of the ECM Process Using GA Optimized Fuzzy Logic Controller Proc. 2nd Indian International Conference on Artificial Intelligence, Pune, Dec. 20-22, 2005.
  • Jaurker, A. R, Gandhi, B. K., and Saini, J. S., Effect of groove on the heat transfer and friction characteristics of rib roughened solar  air  heater duct, Proceedings of 18th National & 7th ISHMT-ASME Heat and Mass Transfer Conference, Jan. 4-6, 2006, IIT Guwahati, India.
  • Jaurker, A. R, Gandhi, B. K., and Saini, J. S., Experimental investigation of heat transfer and friction characteristics of rib-grooved artificially roughened solar air heater ducts, Proc. National Heat Transfer Conference, Delhi College of Engg., Nov.  2005.
  • Jourkar, A.R., Saini, J.S. and Gandhi, B.K., Experimental investigation on thermo- lydraulic performance of rib groove roughened solar air heater ducts. Proc. 14th ISME International Conference on Mechanical Engg., D.C.E. Delhi, Dec. 6-8,2005.
  • Jourkar, A.R., Saini, J.S., and Gandhi, B.K., Effect of groove on heat transfer and friction characteristics of rib roughened solar air heater dirt, proc. 7th ISHMT – ASME and 18th National conference on Heat - & Mass Transfer, IIT Guwahati, Jan 4-6, 2006.
  • Kansal, H., Singh, S. and Kumar, P., Development of Powder Mixed “Electrical Discharge Machining (PMEDM) Process, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Kansal, H.K. Singh S. and Kumar, P., The Finite Element Simulation of Powder Mixed Electric Discharge Machining (PMEDM) Process” accepted for publication in Proceedings of CIEE – 05 to be held at SLIET Longowal on 18-19 Nov., 2005.
  • Kaple, N., Arora, N.,  and Dwivedi D.K., Mechanical and Metallurgical properties of NI-Cr and Co-WC coatings : Flame sprayed and fused by TIG, Proc. of National Conference on Advances in Manufacturing Technology, NITTTR, Chandigarh, Nov. 09-11, 2005.
  • Komma, V.R., Jain, P.K., and Mehta, N.K., Agent Based Approach for Automated Guided Vehicle System-A Review, 4th ATDC 2005-DAAAM International Conference on Advanced Technologies for Developing Countries, Slavonski Brod, Croatia, Sep. 21-24, 2005, pp 425-430.
  • Komma, V.R., Jain, P.K., and Mehta, N.K., Agent Based Approach for Automated guided Vehicles Systems – A Review, 4th ATDC 2005 – DAAAM International Conference on Advanced Technologies for Developing Countries (21-24 Sep., 2005, Slavonski Brod, Croatia), pp 425-430.
  • Komma, V.R., Jain, P.K., and Mehta, N.K., Agent Based Manufacturing System – A  Distributed Control Approach’, Proceedings of Advances in Mechanical Engineering (AIME-2006), Jamia Millia Islamia, New Delhi, Jan. 20-21, 2006.
  • Komma, V.R., Jain, P.K., and Mehta, N.K., Agent Based Manufacturing System – A Distributed Control Approach’ Proceedings of Advances in Mechanical Engineering (AIME-2006), Jan. 20-21, 2006, Jamia Millia Islamia, New Delhi.
  • Kumar, A. and Arora N., Simulation of Transient thermal response in welding, National Conference on Advances in Manufacturing Technology, NITTTR, Chandigarh, Nov. 09-11, 2005.
  • Kumar, R., Gupta, A. and Vishwaskarama, S., Effect of Fin height During Condensation of R-134a Vapor Over Single Horizontal Integral Fin Tubes, Proceedings of the 18th National & 7th ISGMT-ASME Conference, IIT Guwahati, pp. 1743-1750, Jan. 4-6, 2006.
  • Kumar, R., Kumar, D. and Kumar, P., Evaluation of Potential System Failure Causes in FMEA using Fuzzy and Grey Approach, International Conference on Reliability Safety and Hazard, ICRESH – 2005, BARC Mumbai, 2005.
  • Kumar, R., Kumar, D. and Kumar, P., FP Approach to Model and Analyze System Behavior International Conference on Reliability safety Engineering INCRESE Dec. 23-25. IIT Kharagpur, 2005..
  • Kumar, R., Kumar, D. and Kumar, P., Knowledge Based Reasoning to Model Uncertainties in FMEA 11th International Conference on Productivity and Quality Research, IIT  Delhi, Dec. 12-15, 2005.
  • Kumar, R., Kumar, D. and Kumar, P., Parametric Study for Optimal Maintenance Decisions Using Fuzzy Methodology, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Kumar, R., Mishra, B.K. and Jain, S.C., Piezolectric Induced deflection of laminated composite shells using Finite Element Method. Proc. The Structural engineering convention., IISc Banglore. Pp 412, Dec. 14-16, 2005.
  • Kumar, R., Mishra, B.K. and Jain, S.C., Thermally induced shape distortion control of antenna reflector with piezoelectric patches, Proc. ISSS International Conference on Smart Materials, structures and systems. IISc Bangalore. Paper No. PS 19,pp 119-123, Jul. 28-30, 2005.
  • Kumar, R., Mishra, B.K. and Jain, S.C., Thermally induced vibration suppression of amtenna reflector with piezoelectric sensors and actuators”. Proc. ISSS International Conference on Smart Materials, structures and systems. IISc Bangalore., Paper No. SA 07, pp. 51-57,Jul. 28-30, 2005.
  • Kumar, S., Kumar, P. and Shan, H.S., Time Series Modeling of Casting Surface Roughness Produced by the Evaporative Pattern Casting Process Proceedings All India Seminar on Recent Advances in Manufacturing Technologies, NIT Rourkela, Oct. 22-23, 2005 pp. 266-273
  • Kumar, S., Kumar, P., Shan, H.S., Effect of Process Parameters on the Porosity of Al -7%Si Alloy Castings Produced by Evaporative Pattern Casting Process. All India Seminar on Advances in Production Engineering: Vision   2020, MNIT, Jaipur, Dec. 30-31, 2005.
  • Kumar, S., Kumar, P., Shan, H.S., Investigation of the Effect of Process Parameters on Bulk Density in Evaporative Pattern Casting Process by Using the Tagushi Method. Published in National Conference on Emerging Trends in manufacturing systems (ETMS -2005) Mar. 15-16 in SJMIT Radaur, 2005.
  • Kumar, S., Kumar, P., Shan, H.S., Optimization of Process parameters Affecting the Quality of Al- 7%Si Alloy Castings Produced by Evaporative Pattern Casting Process, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Kumar, S., Kumar, P., Shan, H.S., Time Series Modeling of Casting Surface Roughness Produced by the Evaporative Pattern Casting Process, All India Seminar on Recent Advances in Manufacturing Technologies”, Oct. 22-23, NIT Rourkela, pp 266-273, 2005.
  • Kumar, V., Sharma, S. C. and Jain, S.C., Journal Motion Simulation of Hybrid Journal Bearing Considering Viscodity Variation Due to Temperature Change, ASME Int. Mech. Engg. Cong. and Exp., Orlando, Florida, USA, Nov. 5-11, 2005.
  • Kumar, V., Sharma, S. C. and Jain, S.C., Journal Motion Simulation of Hybrid Journal Bearing Considering Viscosity Variation due to Temperature Change, Proceedings of IMECE 2005, 2005 ASME International Mechanical Engineering Congress and Exposition, Nov 5 – 11, Orlando, Florida, USA, 2005
  • Lakhera V.J., Gupta A. and Kumar R., Boiling Outside Tube Bundles: A State of the Art Review, ISHMT-ASME Heat Transfer Conference, IIT Guwahati, Jan. 4-6, 2006.
  • Lakhera V.J., Gupta A. and Kumar R., Boiling Outside Tube Bundles: A State of the Art Review, International Conference of Indian Society of Mechanical Engineers, DCE, New Delhi, Dec. 12-14, 2005.
  • Lakhera, V. J.,  Gupta, A., and Kumar, R., Boiling Outside Tube Bundles : A State of the Art Review, Proceedings of the 14th ISME International Conference on Mechanical Engineering in Knowledge Age, DCE Delhi, paper No. 121, Dec. 12-14, 2005.
  • Mehta, N.K., Modern manufacturing concepts: challenges and research issues, National Conference on Computer  Aided Design and Manufacturing: A Global Perspective, Thapar Institute of Engg. & Technology Patiala, Apr. 8-9, 2005, pp. 4-16.
  • Misra, R.D. and Sahoo, P.K., Thermoeconomic Optimization of a Double – Effect H2O/LiBr Vapour – Absorption Refrigeration System using the Exergetic Cost Theory, pp -477 – 484, ECOS 2005, June 20-22, Trondheim, Norway.
  • Nath, A. K., Paul, C. P.,  Rao, B. T., Kaul, R., Raghu, T., Dutta Majumdar, J., Gandhi, B. K. and Mudali, U. K., High Power CO2 Lasers and their material processing applications at Centre for Advanced Technology, India, ICONO/LAT 2005, Technical Digest on CD ROM (St. Petersberg, Russia, 2005) Presentation No. LSE4.
  • Pandey, N.D., Shan, H.S.  and Mohandas, T., Effect of peak power of laser pulses on the precision characteristics of laser drilled holes Proceedings 4th National Conference on Precision Engineering, COPEN Dec. 2005 pp. 194-200.
  • Pandey, N.D., Shan, H.S. and Mohandas, T., Laser Processing of Nickel base superalloys Proceedings Seminar on Application of Laser in Materials Processing. WALMI – 2006, Kolkata, Feb. 3-4, 2006, pp. 192-200.
  • Pandey, N.D., Shan, H.S. and Mohandas, T., Micro-hole drilling by laser :  statistical analysis Proceedings National Conference on CAD/CAM Robotics and Futuristic Factories, Ranchi, Dec. 10-11, 2005.
  • Pathak P.M., Rawat R.S.S., Adatiya Yogesh, Thakur, H. and Saxena, V.,  Force Control in Cooperative Space Robot through a Virtual Foundation, 12th National Conference on Machine and Mechanisms (NaCoMM - 2005), IIT Guwahati, Dec. 16-17, 2005, pp. 106-112.
  • Pati, R., Vrat, P. and Kumar, P., Strategy to Encourage Wastepaper Recycling – A Linear Programming Approach Operations and Supply Chain Management, Nov. 3-6, Bali, Dec. 15-17, 2005.
  • Patil, A., Kumar, R., and Jain, S.C., Optimal active vibration control of smart plate, Proc. ISSS International Conference on Smart Materials, structures and systems. IISc Bangalore, Paper No. SA 09,pp. 67-75, Jul. 28-30, 2005.
  • Pattanaik, L.N., Jain, P.K. and Mehta N.K., A genetic algorithm based approach to machine grouping in cellular manufacturing using a new similarity measure, Proceedings of All India Seminar on CAD/CAM, Robotics & Futuristic Factories, Birla Institute of Technology, Mesra, Ranchi, Dec. 10-11, 2005.
  • Pattanaik, L.N., Jain, P.K. and Mehta N.K., Cell Formation using Modular-Reconfigurable Machines, 16th International DAMM Symposium, Intelligent Manufacturing & Automation: Focus on young Researchers and Scientists, 19-22 Oct. 2005, Opatija, Croatia.
  • Ramani, B.M.,  Prabhakaran, P. and Gupta, A., Enhancing the Rate of Heat Transfer Using Extended Surface Over Buried Pipe Heat Exchanger, Proceedings of National Conference on Computational Methods in Mechanical engineering, Osmania University Hyderabad, pp. 240-244, Sept. 16-17, 2005.
  • Sahoo, P.K. and Misra R.D., Thermoeconomic Optimization of a Solar Assisted Single Effect H2 O-LiBr Vapor Absorption System”, 7th ISHMT – ASME Heat and Mass Transfer Conference, IIT Guwahati, Jan. 2006.
  • Sahoo, P.K. and Misra, R.D., Thermoeconomic Evaluation and Optimization of an Aqua – Ammonia Vapour – Absorption Refrigeration System Using Evolutionary Programming, pp-935-943, ECOS 2005, June 20-22, Trondheim, Norway. 
  • Sehgal, S.S., Gakkhar, R.P., Singh., K.M. and Bhatnagar, S.K., Liquid fuel aombustion within submerged flame porous burner. Proccedings of the 19th National Conference on IC. Engines and Combustion, Dec. 21-23, 2005 pp. 369-375.
  • Sen, M. and Shan, H.S., Design of Fuzzy Logic based Gap-Control System for the EJD Process Proceedings 16th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Researches and Scientists” Croatia, Oct. 19-22, 2005 pp. 341-42.
  • Sen, M. and Shan, H.S., Enhancing The Performance of The Electro Jet Drilling Process Using Fuzzy Logic Based Gap Control System Proceedings International Symposium on Electrochemical Machining Technology 2005 (INSECT 2005) Institute of Microsystem Technology (IMTEK), Freiburg, Germany, Oct. 25th -26th, 2005.
  • Sen, M. and Shan, H.S., Modeling of electrojet drilling process using response surface methodology and Genetic Algorithm Proceedings Tehran International Congress on Manufacturing Engineering, Iran (TICME 2005) Dec. 2005.
  • Sharma, A., Arora, N. and Gupta, S.R., Simulation of effect of weld variables on thermal cycles during twin wire welding, Proc. of 7th International Conference on Trends in Welding Research, Pine Mountain, Georgia, USA, May 16-20, 2005.
  • Sharma, A., Prashand, C., and Arora, N., Application of Artificial Neural Networks for Predicting Weld Bead Geometry in Twin-wire Submerged Arc Welding, National Welding Seminar (NWS-2005), The Indian Institute of Welding, Bhilai, pp. 101-107, Dec. 15-17, 2005.
  • Sharma, R., Kumar, D., and Kumar, P., FP approach to model and analyze System behavior International Conference on Reliability safety Engineering INCRESE – 2005, IIT Khargpur, India.
  • Sharma, R., Kumar, D., and Kumar, P., Knowledge Based Reasoning to Model Uncertainties in FMEA International conference on Productivity and Quality Research ‘ICPQR-2005, IIT Delhi.
  • Sharma, R., Kumar, D., and Kumar, P., Parametric Study for Optimal Maintenance Decisions Using FM 14th ISME International Conference, 11-14 Dec-2005, New Delhi.
  • Singh, A., Jain, P.K. & Mehta, N.K., Minimization of flow time and tardiness by swapping of dispatching rules’, 16th International DAMM Symposium, Intelligent Manufacturing & Automation: Focus on Young Researchers and Scientists, Oct. 19-22, 2005, Opatija, Croatia.
  • Singh, B., Kumar, P., Mishra, B.K., Experimental Investigation of Wax Blends for Dimensional Accuracy of the Pattern Used in Investment Casting Process. All India Seminar on Advances in Production Engineering: Vision 2020, MNIT, Jaipur, Dec. 30-31.
  • Singh, R., Saini, R.P. and Saini, J.S. Performance analysis of paclced bed solar energy storage system having large sized storage materials if dufferent shapes, Proc. Int. Solar Energy Conference (ASME – ISEC - 2005), Florida, 6 – 12 Angust, 2005.
  • Sohagpure, L., Diwedi, A., Kumar, P., Quality Function Deployment in Process Industry, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Srivastava, A., Mishra, B.K., Jain, S.C., Effect of Enclosed Gases on the Dynamics of Inflated Torus, Proc. SEC – 2005, IISc Bangalore, pp. 439, Dec. 14-16, 2005.
  • Udagiri, S., Kumar,  R., Srivastava, A., and Jain, S.C., Finite element modeling of smart curved beam All India seminar on advances in product development – 2006. MNNIT Alahabad., Paper Serial No. S-12, Feb. 17-18, 2006.
  • Uttkarsh, Kumar, P., Development of an Algorithm for Inventory Management with Stochastic Lead Time, 11th International Conference on Productivity an Quality Research, IIT Delhi, Dec. 12-15, 2005.
  • Vazagan, A., Mehta, N.K. and Jain, P.K., Determination of machinable volume for finish cuts in CAPP, 21st International Conference on CAD/CAM, Robotics and Factories of future, Krawkow, Poland, 17-20 Jul., 2005.
  • Verma, A.K., Rajotia, S. & Mehta, N.K., Graph based machining feature extraction from 3D solid model of part with curved surfaces, National Conference on Computer Aided Design and Manufacturing: A Global Perspective, Thapar Institute or Engg. & Technology Patiala, Apr. 8-9, 2005, p.137.
  • Verma, D.K. and Arora, N., Application of fuzzy clustering and aggregate index method for development of weld quality model for TIG welding, National Welding Seminar (NWS-2005). The Indian Institute of Welding, Bhilai, Dec. 15-17, 2005.
  • Verma, H.K., Kumar, A., Saini, R.P. and Gandhi, B. K., Performance testing of hydropower stations: Need, scope and recommendations, CBIP-Conference on Development of Hydro Power Projects – A Prospective Challenge, Apr. 20-22, 2005, Shimla, India.
  • Walia R.S., Shan H.S., Kumar, P., Application of Taguchi method for optimization of finishing conditions in centrifugal force assisted abrasive flow machining (CFAAFM)”, National Conf. on ETMS – 2005 Mar. 15-16, Radaur, 2005.
  • Walia R.S., Shan H.S., Kumar, P., Determining Dynamic Active Abrasive Particles In The Media Used In Centrifugal Force Assisted Abrasive Flow Machining (Cfaafm) Process, 14th ISME International Conference, DCE, New Delhi, Dec. 12-14, 2005.
  • Walia R.S., Shan H.S., Kumar, P., Metallurgical Aspects of Material Removal in Centrifugal Force Assisted Abrasive Flow Machining (CFAAM), All India Seminar on Recent Advances in Manufacturing Technologies”, Oct. 22-23, NIT Rourkela, pp. 266-273, 2005.
  • Walia R.S., Shan H.S., Kumar, P., Modeling of the Energy Required to Dislodge Atoms from the Metallic Structure in Centrifugal Force Assisted Abrasive Flow Machining Process, All India Seminar on Advances in Production Engineering: Vision 2020, MNIT, Jaipur, Dec. 30-31, 2005.
  • Walia R.S., Shan H.S., Kumar, PTime Series Modeling of Surface Produced by the Flow of Abrasive Laden Media in Centrifugal Force assisted Abrasive Flow machining Process”, International Conference MESIC –CISIF, Spain Sep., 19-21, 2005.
  • Walia, R.S., Shan, H.S. and Kumar, P., Metallurgical Aspects of Material Removal in Centrifugal Force Assisted Abrasive Flow Machining Proceedings All India Seminar on Recent Advances in Manufacturing Technologies, NIT Rourkela, Oct. 22-23, 2005 pp. 266-273.

<Top>