Publication-conferences2018 - Department of Mechanical and Industrial Engineering,Indian Institute of Technology Roorkee
Publication-conferences2018

2018

  1. S. Khullar, K.M. Singh, B.K. Gandhi and M.Cervantes,“Effect of Axial Water Jet Size and Velocity on Unsteady Pressure Pulsations in a Deaccelerating Swirling Flow”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, Mumbai, India, 2018
  2. Sandeep Kumar, Rahul Goyal, B.K. Gandhi and M.Cervantes, “Experimental Investigation of a Draft Tube Flow Field in a Francis Turbine during Part Load Operation”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, Mumbai, India, 2018
  3. S. Sharma, R Tarodiya and  B.K. Gandhi,“Experimental Investigation of Flow Field of a Pot Tester due to Propeller Rotation”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, Mumbai, India, 2018
  4. R. Tarodiya and  B.K. Gandhi, “Numerical Prediction of Casing Wear of a Centrifugal Slurry Pump handling Solid-Liquid Mixture”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), IIT Bombay, Mumbai, India, 2018
  5. Rahul Chhibber & Navneet Arora, "Residual stresses in bimetallic weld joint with varying buttering layer thickness", Manufacturing Science and Engineering Conference (MSEC) and NAMRC 46, Texas A&M University, Texas, USA, 2018
  6. Singh M., Ganpule S.G., "Blast Induced Brain Injury: Delineating the Effects of Primary Blast and Head, World Congress on Biomechanics", Dublin, Ireland, 2018
  7. Kannojiya V., Das A.K., Das P.K., "Assessment of Suitability for Hemodynamically Levitated Centrifugal Pump as Left Ventricular Assist Device", 5th International Conference on Computational Methods for Thermal Problems, Bangalore, 2018
  8. Saha A., Meena C.S., Das A.K., "Numerical analysis of Nukiyama’s experiment around a thin wire", 5th International Conference on Computational Methods for Thermal Problems, Bangalore, 2018
  9. Mulu Girmay, Pathak Pushparaj Mani, Samantaray A.K., Rochdi Merzouki, Belkacem Ould Bouamama, "Model Based Control of Cooperative Planar Bionic Manipulator", International Conference on Bond Graph Modeling (ICBGM), Bordeaux, France, 2018
  10. Ram R.V., Pathak P.M., and Junco S. J., "Reconfiguration of the Mobile Manipulator under the Failure of Joint Actuator", International Conference on Bond Graph Modeling (ICBGM), Bordeaux, France, 2018
  11. Baider Binaya, Nicolle J., Gandhi B. K. and Cervantes Michel, "Sensitivity of the Winter-Kennedy method to inlet and runner blade angle change on a Kaplan turbine", 29th IAHR symposium on Hydraulic Machinery and Systems, Kyoto, Japan, 2018
  12. Goyal Rahul, Gandhi B. K. and Cervantes Michel, "Experimental Investigation on a High Head Francis Turbine Model during Shutdown Operation", 29th IAHR symposium on Hydraulic Machinery and Systems, Kyoto (Japan), 2018
  13. Crespo Martín, Nacusse Matías, Junco Sergio, Rayankula Vitalram, Pathak Pushparaj Mani, "Control of a mobile robotic manipulator: a combined design approach, IMAACA," The International Conference on Integrated Modeling and Analysis in Applied Control and Automation, 11th Edition, Part of I3M2018, , Budapest, Hungary., 2018
  14. Bisht Ravindra Singh, Pathak Pushparaj Mani, & Panigrahi Saroj Kumar, "Development of Magnetic Adhesion Based Wheel-Driven Climbing Machine for Ferrous Surface Applications", ASME 2018 Dynamic Systems and Control Conference, Atlanta, Georgia, USA, 2018
  15. Aditya Kumar & Sudhakar Subudhi, "Investigation of Thermal Conductivity of Water Based Fe3O4 Magnetic Nanofluids", 12th International Conference on Complex Fluids and Soft Matter (COMPFLU-2018), IIT Roorkee, Roorkee, India, 2018
  16. Darshan M. B., Kumar R., Das A. K., "Experimental investigation of heat transfer coefficient of R407C refrigerant in horizontal smooth and micro-fin tubes", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  17. Rajesh Choudhury, Himanshu Tripathi, Anuj Kumar Mishra & Sudhakar Subudhi, "Statistical Analysis of buoyancy induced turbulent flowin a square enclosure filled with water-based Al2O3 nanofluids’ 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP – 2018), IIT Bombay, Mumbai, India, 2018
  18. Geleta Fekadu & Sudhakar Subudhi, "Experimental Study of Internally Cooled Desiccant Dehumidification System", 7th International and 45th National Fluid Mechanics and Fluid Power Conference (FMFP2018), IIT Bombay, Mumbai, India, 2018
  19. Gubrele S., Singh D., Silvi, L., Das A. K., "Hydraulic Jump after Impingement of Circular Jet on Vertical Solid Surface: An Experimental Investigation", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  20. Gunipe P.K., Kumar P., Sanjay V., Das A.K., "Membrane Free Water Filtration using inertial Microfluidics for Particle Extraction: A Computational Study", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  21. Sharma Kamal R, Dutta S, "Wake Sensitivity of Flow over Square Cylinder with respect to Length of an Attached Flexible Wake Splitter", 7th International and 45th National Fluid Mechanics and Fluid Power Conference (FMFP2018), IIT Bombay, 2018
  22. Kannojiya,V., Das A.K., Das P.K., "Numerical Analysis of Centrifugal Blood Pump: Proposal of Optimum Design", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  23. Aditya Kumar, Deepak Kumar & Sudhakar Subudhi, "Experimental Investigation of Natural Convection in an Open Cavity with Water and Fe3O4/Water Magnetic Nanofluid", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP – 2018), IIT Bombay, Mumbai, India, 2018
  24. Deepak Kumar, Aditya Kumar & Sudhakar Subudhi, "Numerical Study of Natural Convection of Al2O3/H2O Nanofluid in a square Cavity with Localised Heating", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP – 2018), IIT Bombay, Mumbai, India, 2018
  25. Kumar R., Das A.K., "Gas Bubble Bypass through a Liquid-Liquid Interface: Entrainment Study", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  26. Meena C.S., Das A.K., "Experimental Study of Boiling on Horizontal and Inclined Cylinders", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  27. Rathia S.K., Rohilla L., Das A. K., "Effects of Slugging and Flooding on Bottle Emptying Time for Different Inclinations", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  28. Rohilla L., Das A. K., "Numerical Identification of Slip Regime for a Microbubble around a Taylor Bubble in Viscous Newtonian Medium", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  29. Saha A., Das A.K., "Boiling around Horizontal Wire in Presence of Neighbouring Active and Passive Wires: A Numerical Study", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  30. Sharma Vikas, Dutta S., "Numerical Investigation of Bio-inspired Micro Riblet Surface for Drag Reduction", 7th International and 45th National Fluid Mechanics and Fluid Power Conference (FMFP2018), IIT Bombay, 2018
  31. Silvi L.D., Ghosh S., Das A.K., "Numerical study of Flow Boiling Situation in Annular Two-Phase Regime, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power", Bombay, 2018
  32. Singh D., Das A.K., "Effect of No-Slip Constraint in the Vicinity of a Bursting Bubble at Free Surface", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  33. Sudhakar T., Das A. K., "Proposal of Novel Approach for Generation of Water-in-Oil-in-Water Encapsule in Concentric Channel", 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, Bombay, 2018
  34. Arya R. K., & Dvivedi A., "Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode", 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai., 2018
  35. Kumar S., & Dvivedi A., "On Performance Evaluation of Helical Grooved Tool during Rotary Tool Micro-ultrasonic Machining", 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai., 2018
  36. Singh T., & Dvivedi A., "Experimental investigation on the effect of energy interaction duration during micro channeling with ECDM", 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai., 2018
  37. Bisht Ravindra Singh, Pathak Pushparaj Mani, Panigrahi Soraj Kumar, "Development of a Climbing Robot Based on Multi-Suction Cups Mounted on Timing Belt Mechanism", Asian MMS 2018, , Bengaluru, India, 2018
  38. Geleta Fekadu & Sudhakar Subudhi, "Novel Experimental Study of Internally Cooled Dehumidifier for Liquid Desiccant System", Third International Conference on Sustainable Energy and Environmental Challenges (3rd SEEC), IIT Roorkee, 2018
  39. Chauhan, A., Mishra, K.B., "Experimental investgation of performance of biodiesel, ethanol and peroxide blends in 60 W diesel engine", 2nd Intl. Conference on Sustainable Energy and Environmental Challenges, SEE-2018, IISc Bangalore, 2018
  40. A. K. Rajak, B. B. Kumar, C. K. Meena, ¬D. K. Dwivedi, “Grain Refinement of Cast Al-Si-Mg Alloys Using Electromagnetic Stirring” published in proceedings of International Conference on Nanoscience, Nanotechnology & Advanced Materials, Hong Kong, 2018
  41. Rahul Goyal, B. K. Gandhi and Michel Cervantes, “Transient Pressure Measurements in the Vaneless Space of a Francis Turbine during Load Acceptances from Minimum Load”, Proceedings of the International Symposium on Current Research in Hydraulic Turbines CRHT – VIII, Turbine Testing Lab, Kathmandu University, Dhulikhel, Nepal, 2018
  42. Rahul Goyal, B. K. Gandhi and Michel Cervantes, “Experimental Investigation on a High Head Francis Turbine Model during Shutdown Operation”, Accepted for 29th IAHR symposium on Hydraulic Machinery and Systems,Kyoto (Japan). Kyoto (Japan), 2018
  43. Binaya Baider, J Nicolle, B. K. Gandhi and Michel Cervantes, “Sensitivity of the Winter-Kennedy method to inlet and runner blade angle change on a Kaplan turbine”, Accepted for 29th IAHR symposium on Hydraulic Machinery and Systems, Kyoto (Japan), 2018
  44. S.S. Chauhan, S.K. Manhas & M.M. Joglekar, "Fabrication of cantilever MEMs structure of C-axis grown AlN film for energy harvester application", in: Proceedings of the IEEE International Conference on Industrial Technology, 2018
  45. Manish Kumar, V.B. Pandey, I.V. Singh, B.K. Mishra, S. Ahmad, A.V. Rao, Vikas Kumar, "A Numerical Study of Creep Crack Growth in an Aero-engine Turbine Disc using XFEM", 2nd International Conference on Structural Integrity and Exhibition, Hotel Marriott, Hyderabad, Telangana, 2018
  46. U. K. Komal, M. K. Lila and I. Singh, “Thermal and Mechanical Characterization of Hemp and Coir Fibers Reinforced PLA based Green Composites” Third International Conference on Composite Materials and Material Engineering (ICCMME2018), National University of Singapore, Singapore, 26-28th January, 2018
  47. Anurag Singh & Apurbba Kumar Sharma, "Breakthrough in microwave drilling of metallic materials using 2.45 GHz multi-mode microwave applicator", Proceedings of 2nd International Conference on Advances in Mechanical Engineering (ICAME 2018), Chennai, 2018
  48. Anurag Singh & Apurbba Kumar Sharma, "Effect of drilling conditions on microwave-metal discharge during microwave drilling of stainless steel", International Conference on Green Trends in Mechanical Engineering Sciences (GTMES 2018), Bangalore, 2018
  49. Anurag Singh and Apurbba Kumar Sharma, “Temperature profiling of microwave-metal discharge plasma channel using image processing technique”, 7th International All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018), Chennai, 2018
  50. Shivani Gupta & Apurbba Kumar Sharma, "Sintering of biomaterials for arthroplasty: a comparative study of microwave and conventional sintering techniques, International Conference on Green Trends in Mechanical Engineering Science, Karnataka, 2018
  51. Shivani Gupta and Apurbba Kumar Sharma, "Application of microwave energy for producing biomedical implants: Possibilities and challenges", International Symposium on Functional Materials: Energy and Biomedical Applications, Chandigarh, 2018
  52. Geleta Fekadu & Sudhakar Subudhi, "Non-Conventional Energy Sources Used in Liquid Desiccant Dehumidification and Regeneration", 2nd International Conference on Sustainable Energy and Environmental Challenges (SEEC 2018), IISc, Bangalore, 2018
  53. Geleta Fekadu & Sudhakar Subudhi, "Dehumidifcation and internally cooling in single liquid desiccant system", Ist Research Scholar day (RS-2018), IIT Roorkee, Roorkee, India, 2018
  54. Aditya Kumar & Sudhakar Subudhi, "Natural convection in Fe3O4/Water magnetic nanofluid", Ist Research Scholar day (RS-2018), MIED, IIT Roorkee, Roorkee, India, 2018
  55. Geleta Fekadu & Sudhakar Subudhi, "Non conventional energy sources used in liquid desiccant dehumidification and regeneration", SEEC-2018, IISc, Bangalore, India. 2018
  56. Sanjay Kumar & D.B. Karunakar, “Enhancing the permeability and properties of ceramic shell in investment casting process using ABS powder and needle coke”, Proceeding of the 73rd World Foundry Congress, 2018
  57. Khyati Tamta & D.B. Karunakar, “Some investigations to enhance the properties of ceramic shell in investment casting process”, In: Proceedings of 66th Indian Foundry Congress, Gandhinagar, Gujarat, India, 2018
  58. Khyati Tamta & D.B. Karunakar, “Experimental investigations on enhancement of mechanical properties of ceramic shell in investment casting process. In: Proceedings of 12th Uttarakhand State Science and Technology Congress, Dehradun, India, 2018
# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.