Publication-Journal2018 - Department of Mechanical and Industrial Engineering,Indian Institute of Technology Roorkee
Publication-Journal2018

2018

  1. Aasi Harpreet Kaur, Mishra Manish, "Transient Behaviour of Three-Fluid Cross-Flow Heat Exchanger Under the Influence of Temperature Non-Uniformity", ASME - Journal of Thermal Science and Engineering Applications. pp. 61012-1-15, Vol. 10,  2018
  2. Addis S. Dvivedi A. & Beshah B., "Determinants of job satisfaction in Ethiopia: evidence from the leather industry", African Journal of Economic and Management Studies,. pp. 410-429, Vol. 9,  2018
  3. Bhandari A. and Bansal A. and Singh A. and Sinha N, "Numerical Study of Transport of Anticancer Drugs in Heterogeneous Vasculature of Human Brain Tumors Using Dynamic Contrast Enhanced-Magnetic Resonance Imaging", Journal of biomechanical engineering. pp. 51010, Vol. 140,  2018
  4. L. Deike, E. Ghabache, G. Liger-Belair, A. K. Das, S. Zaleski, S. Popinet, and T. Séon, “Dynamics of jets produced by bursting bubble”, Physics Review Fluids. pp. 013603, Vol. 3, 2018
  5. Dhurandhar  S. and Bansal A, "Chemical Kinetics Study in Rarefied Martian Atmosphere Using Quantum Kinetics Model", Journal of Physics of Fluids. pp.  117104, Vol. 30,  2018
  6. Fekadu Geleta and Subudhi Sudhakar, "Renewable energy for liquid desiccant air conditioning systems: A review", Renewable and Sustainable Energy Reviews. pp.  364-379, Vol.  93, 2018
  7. Ganpule S., Daphalapurkar N., Cetingul M. P., Ramesh K. T., "Efect of bulk modulus on deformation of the brain under rotational accelerations", Shock Wves. pp. 127-139, Vol. 28 , 2018
  8. Rahul Goyal and B. K. Gandhi, “Review of hydrodynamics instabilities in Francis turbine during off-design and transient operations”, Renewable Energy. pp. 697-709, Vol. 116, 2018
  9. Rahul Goyal, B. K. Gandhi and Michel Cervantes, “Particle image velocimetry measurements in Francis turbine: a review and application to transient operations”, Journal of Renewable and Sustainable Energy Reviews. pp 2976–2991, Vol. 81, 2018
  10. Gor M. M., Pathak P. M., Samantaray A. K., Alam K., Kumar P., Anand D., Vijay P., R. Sarkar, J.-M. Yang, S. W. Kwak, "Development of a Compliant Legged Quadruped Robot", Sadhna. pp. 102, Vol. 43,  2018
  11. Jani D.B., Mishra Manish, Sahoo P.K., "Investigations on Effect of Operational Conditions on Performance of Solid Desiccant Based Hybrid Cooling System in Hot And Humid Climate", Thermal Science and Engineering Progress. pp. 76-86, Vol. 7, 2018
  12. Jani D.B., Mishra Manish, Sahoo P.K., "Performance Analysis of a Solid Desiccant Assisted Hybrid Space Cooling System Using TRNSYS", Journal of Building Energy. pp. 26-35, Vol.  19, 2018
  13. Jani D.B., Mishra Manish, Sahoo P.K., "A Critical Review on Application of Solar Energy as Renewable Regeneration Heat Source in Solid Desiccant – Vapor Compression Hybrid Cooling System", Journal of Building Energy. pp. 107-124, Vol. 18, 2018
  14. Aditya Kumar & Sudhakar Subudhi, "Preparation, characteristics, convection and applications of magnetic nanofluids: A review", Heat and Mass Transfer. pp. 241-265, Vol. 54, 2018
  15. Kumar S. & Dvivedi A., "Fabrication of microchannels using rotary tool micro-USM: An experimental investigation on tool wear reduction and form accuracy improvement", Journal of Manufacturing Processes. pp. 802-815, Vol. 32, 2018
  16. Kumar P.,  Seerha P.P.S., Das A.K., Mitra S.K., "Proposition of an optical arrangement for interface reconstruction between stratified liquids", Chemical Engineering Science. pp. 75-85, Vol. 183,  2018
  17. P. Kumar, M. Prajapati, A. K. Das, S.K. Mitra, "Vortex Formation and Subsequent Air Entrainment inside a Liquid Pool", Industrial & Engineering Chemistry Research. pp. 6538-6552, Vol. 57, 2018
  18. Kumar M., Singh I.V., Mishra B.K., Ahmad S., Rao A.V., Kumar Vikas, "Mixed Mode Crack Growth in Elasto-Plastic-Creeping Solids using XFEM", Engineering Fracture Mechanics. pp. 489-517, Vol. 199, 2018
  19. Kumar M., Ahmad S., Singh I.V., Rao A.V., Kumar J., Kumar Vikas, "Experimental and Numerical Studies to Estimate Fatigue Crack Growth Behavior of Ni-Based Super Alloy", Theoretical and Applied Fracture Mechanics. pp. 604-616, Vol. 96, 2018
  20. C. S. Meena, A. Deep, A. K. Das, “Understanding of interactions of bubbles generated at neighboring nucleation sites”, Heat Transfer Engineering. pp. 885-900, Vol. 39, 2018
  21. S. Mukherjee, S. Datta, A. K. Das, “Molecular Dynamic Study of Boiling Heat Transfer over Structured Surfaces”, Journal of Heat Transfer, pp. 054503, Vol. 140 ,2018
  22. Pawariya K. Dvivedi A. & Singh T., "On performance enhancement of electrochemical discharge trepanning (ECDT) process by sonication of tool electrode", Precision Engineering. pp. 8-19, Vol. 56, 2018
  23. L. Rohilla, A. K. Das, "Understanding of Fluidic Physics during Bypass of a Taylor Bubble around a Transverse Insert in Viscous Medium", Industrial & Engineering Chemistry Research. pp. 13539-13556, Vol. 57, 2018
  24. Patil Roshan, Mishra B.K., Singh I.V, "An Adaptive Multiscale Phase Field Method for Brittle Fracture", Computer Methods in Applied Mechanics and Engineering. pp. 254–288, Vol. 329,  2018
  25. Patil Roshan, Mishra B.K., Singh I.V., "A Local Moving Extended Phase Field Method (LMXPFM) for Failure Analysis of Brittle Materials", Computer Methods in Applied Mechanics and Engineering. pp. 674–709, Vol. 342,  2018
  26. Patil Roshan, Mishra B.K., Singh I.V., Bui T.Q.,  "A New Multiscale Phase Field Method to Simulate Failure in Composites", Advances in Engineering Software. pp. 9-33, Vol. 126,  2018
  27. Singh Inderjeet, Amara Yacine, Melingui Achille, Pathak Pushparaj Mani and Merzouki Rochdi, "Modeling of Continuum Manipulators using Pythagorean Hodograph Curves", Soft Robotics. pp. 425-442, Vol. 5,  2018
  28. Sharma Naveen, Tariq Andallib, Mishra Manish, "Detailed Heat Transfer and Friction Factor Characteristics in a Rectangular Duct with Alternate Solid and Converging-Slit Ribs", Experimental Heat Transfer. pp. 552-570, Vol. 31,  2018
  29. Sharma Naveen, Tariq Andallib, Mishra Manish, "Experimental Investigation of Heat Transfer Enhancement in a Rectangular Duct with Pentagonal Ribs", Heat Transfer Engineering, 2018
  30. Sharma Naveen, Tariq Andallib, Mishra Manish, "Detailed Heat Transfer and Fluid Flow Investigation in a Rectangular Duct with Truncated Prismatic Ribs", Experimental Thermal and Fluid Science. pp. 383-396, Vol. 96,  2018
  31. Sharma Naveen, Tariq Andallib, Mishra Manish, "Experimental Investigation of Flow Structure due to Truncated Prismatic Rib Turbulators Using Particle Image Velocimetry", Experimental Thermal & Fluid Science. pp. 489-508, Vol. 91,  2018
  32. Sharma Naveen, Tariq Andallib, Mishra Manish, "Aerothermal Characteristics of Solid and Permeable Pentagonal Rib Turbulators", ASME Journal of Heat Transfer. pp. 61901-1-14, Vol. 140,  2018
  33. Singha S. K., Singh I.V., Bhardwaj G., Mishra B. K., "A Bézier Extraction based XIGA Approach for Three-Dimensional Crack Simulations", Advances in Engineering Software. pp. 55-93, Vol. 125,  2018
  34. Singh S.K., Singh I.V., Mishra B.K., Bhardwaj G., Singh S.K., "Analysis of Cracked Plate Using Higher-Order Shear Deformation Theory: Asymptotic Crack-Tip Fields and XIGA Implementation", Computer Methods in Applied Mechanics and Engineering. pp. 594–639, Vol. 336,  2018
  35. Samant Sanjay, Singh I.V., Singh R.N., "Influence of Intermediate Rolling on Mechanical Behavior of Modified 9Cr-1Mo Steel", Materials Science and Engineering: A. pp. 135-152, Vol. 738,  2018
  36. V. Sanjay, A. K. Das, "Numerical Assessment of Hazard in Compartmental Fire Having Steady Heat Release Rate from the Source", Building Simulation. pp. 613-624, Vol. 11, 2018
  37. Singh T. & Dvivedi A., "On performance evaluation of textured tools during micro-channeling with ECDM. Journal of Manufacturing Processes", Journal of Manufacturing Processes. pp. 699-713, Vol. 32,  2018
  38. Singh T. & Dvivedi A., "On pressurized feeding approach for effective control on working gap in ECDM., Materials and Manufacturing Processes", pp. 462-473, Vol. 33, 2018
  39. C. Singh, A. K. Das, P. K., Das, "Levitation of non-magnetizable droplet inside ferrofluid", Journal of Fluid Mechanics. pp. 398-448, Vol. 857, 2018
  40. D. Singh, A. K. Das, "Computational simulation of radially asymmetric hydraulic jumps and jump–jump interactions", Computers & Fluids. pp. 1-12, Vol. 170, 2018 
  41. A. Soni, V. Sanjay, A. K. Das, "Formation of fluid structures due to jet-jet and jet-sheet interactions", Chemical Engineering Science. pp. 67-77, Vol. 191, 2018
  42. T. Sudhakar, A. K. Das, "Interface Evolution of a Liquid Taylor Droplet during Passage through a Sudden Contraction in a Rectangular Channel", Chemical Engineering Science. pp. 993-1010, Vol. 192, 2018
  43. Sushanta Dutta, Bhupendra Singh More, Bhupendra Kumar Gandhi and Manish Kumar Chauhan, “Experimental investigation of flow over a square cylinder with an attached splitter plate at intermediate Reynolds number”, Journal of Fluids and Structures. pp. 319-335, Vol. 76, 2018
  44. Pankaj Tiwary & Sudhakar Subudhi,  “A review of studies using nanofluids in flat-plate and direct absorption solar collectors”, Renewable and Sustainable Energy Reviews. pp. 54-74, Vol. 84, 2018
  45. Geleta Fekadu & Sudhakar Subudhi,  “Renewable energy for liquid desiccant air conditioning systems: A review”, Renewable and Sustainable Energy Reviews. pp. 364-379, Vol. 93, 2018
  46. Amanuel Tarikayehu, Mishra Manish, "Thermohydraulic Optimization of Triple Concentric-Tube Heat Exchanger: A Multi-Objective Approach", Journal of Process Mechanical Engineering, 2018
  47. Amanuel Tarikayehu, Mishra Manish, "Investigation of Thermohydraulic performance of Triple Concentric-tube Heat Exchanger with CuO/Water nanofluid: Numerical approach", Heat Transfer: Asian Research, 2018
  48. Kashyap Yashwant, Bansal Ankit, Sao Anil K., Hammer, A, "Model for Estimation of Global Horizontal Irradiance in Presence of Dust", Fog and Clouds, IEEE Transactions on Geoscience and Remote Sensing. pp. 7030-7037, Vol. 56,  2018
  49. Vivek Kumar, and Satish C. "Sharma Influence of dimple geometry and microroughness orientation on performance of textured hybrid thrust pad bearing", Meccanica. pp. 3579-3606, Vol. 53, 2018
  50. Jadhav S, Thakre GD, Satish C. Sharma, "An experimental study on tribological performance and surface characteristics of lubricated point contact", Acta Mechanica. pp. 4413-30, Vol. 229, 2018
  51. Khatri CB, Satish C. Sharma., "Analysis of textured multi-lobe non-recessed hybrid journal bearings with various restrictors", International Journal of Mechanical Sciences. pp. 258-86, Vol. 145, 2018
  52. Vivek Kumar, Satish C. Sharma, "Finite element method analysis of hydrostatic thrust pad bearings operating with electrically conducting lubricant", Journal of Engineering Tribology. pp. 1318-31, Vol. 232, 2018
  53. M. Ahmadlouydarab, C. Lan, A. K. Das, Y. Ma, "Coalescence of sessile microdroplets subject to a wettability gradient on a solid surface" Physical Review E, In Press. 
     
  54. C. S. Meena, A. Deep, A. K. Das “Understanding of interactions of bubbles generated at neighboring nucleation sites”, Heat Transfer Engineering, 2018
  55. Divya Singh, Avinash Parashar, "Effect of symmetrical and asymmetrical tilt grain boundaries on radiation induced defects in zirconium", Journal of Physics D: Applied physics. pp. 265301, Vol. 51, 2018
  56. Rajesh Kumar, Avinash Parashar, "Effect of geometrical defects and functionalization on the interfacial strength of h-BN / polyethylene based nanocomposite", Polymer. pp. 82-90, Vol. 146, 2018
  57. Rajesh Kumar, Avinash Parashar, "Effect of geometrical defects and functionalization on the interfacial strength of h-BN / polyethylene based nanocomposite", Polymer. pp. 82-90, Vol. 146, 2018   
  58. Divya Singh, Avinash Parashar, "Effect of symmetric and asymmetric tilt grain boundaries on the tensile behaviour of bcc-Niobium", Computational materials science. pp. 126-132, Vol. 143, 2018
  59. Akarsh Verma, Avinash Parashar, "Molecular dynamics based simulations to study failure morphology of hydroxyl and epoxide functionalised graphene", Computational materials science. pp. 15-26, Vol. 143, 2018 
  60. Akarsh Verma, Avinash Parashar, "Muthukumaran Packirisamy Atomistic modeling of graphene/h-BN polymer nanocomposites: A review", Wires Computational molecular science. pp. 1-50, Vol. 3, 2018
  61. Rajesh Kumar, Avinash Parashar, Pierre Martiny, "Displacement thresholds and knock-on cross sections for hydrogenated h-BN monolayers", Computational materials science. pp. 82-88, Vol. 142, 2018
  62. Akarsh Verma, Avinash Parashar, "Molecular dynamics based simulations to study the fracture strength of monolayer graphene oxide", Nanotechnology. pp. 115706, Vol. 29, 2018
  63. Akarsh Verma, Avinash Parashar, "Reactive force field based atomistic simulations to study fracture toughness of bicrystalline graphene functionalised with oxide groups", Diamond and Related Materials. pp. 193-203, Vol. 88, 2018
  64. Akarsh Verma, Avinash Parashar, "Tailoring the failure morphology of bicrystalline graphene oxide", Journal of Applied Physics. pp. 015102, Vol. 124, 2018
  65. Akarsh Verma, Avinash Parashar, "Structural and Chemical Insights into Thermal Transport for Strained Functionalised Graphene: A Molecular Dynamics Study", Materials research express. pp. 116505, Vol. 5, 2018
  66. Divya Singh, Pankaj Sharma, Sahil Jindal, Prince Kumar, Piyush Kumar, Avinash Parashar, "Atomistic simulations to study crack tip behaviour in single crystal of bcc Niobium and hcp Zirconium", Current applied physics. pp. 37-43, Vol. 19, 2018   
     
  67. Rajesh Kumar, Avinash Parashar, Pierre Martiny, "Displacement thresholds and knock-on cross sections for hydrogenated h-BN monolayers", Computational materials science. pp. 82-88, Vol. 142, 2018 
  68. D. Santhosh Kumar, Ravi Kumar, "Experimental investigation on flow of R-600a inside a diabatic helically coiled capillary tube: Concentric configuration", Int. J. refrigeration.  pp, 186-192, vol 86, 2018
  69. Radha Raman Mishra and Apurbba Kumar Sharma, "Multi-Physics Simulation of InSitu Microwave Casting of 7039 Al Alloy inside Different Applicators and Cast Microstructure", J Process Mechanical Engineering, 2018
  70. Gaurav Kumar, and Apurbba Kumar Sharma. "Role of dielectric fluid and concentrator material in microwave drilling of borosilicate glass", Journal of Manufacturing Processes. pp. 184-193, Vol. 33, 2018
  71. Dungali Sreehari, and Apurbba Kumar Sharma. "On form accuracy and surface roughness in micro-ultrasonic machining of silicon microchannels", Precision Engineering. pp. 300-309, Vol. 53, 2018 
  72. Lokesh Kumar Saxena, Pramod Kumar Jain, and Apurbba Kumar Sharma. "Tactical supply chain planning for tyre remanufacturing considering carbon tax policy", The International Journal of Advanced Manufacturing Technology. pp. 1505-1528, Vol. 97, 2018  
  73. Radha Raman Mishra and Apurbba Kumar Sharma, "Effect of solidification environment on microstructure and indentation hardness of Al-Zn-Mg alloy casts developed using microwave heating", International Journal of Metalcasting, pp. 370–382, Vol. 12, 2018 
  74. Blankenhagel, P., Wehrstedt, K.D., Mishra K.B., Steinbach, J., "Thermal radiation assessment using infrared camera", Journal of Loss Prevention in Process Industries. pp. 246-253, Vol. 54, 2018 
  75. Mishra, K.B., "The influence of Volume Blockage Ratio on IOCL Jaipur explosion", Journal of Loss Prevention in Process Industries. pp. 196-205, Vol.54, 2018 
  76. Dasgotra, A., Varun Teja, GVVV, Sharma, A., Mishra, K. B., "CFD modeling of large-scale flammable cloud dispersion using FLACS", Journal of Loss Prevention in Process Industries, 2018  
  77. Vijay Kumar Dalla and Pushparaj Mani Pathak, "Docking Operation by Multiple Space Robots for Minimum Attitude Disturbance", International Journal of Modelling and Simulation, pp. 38-49, Vol. 38, 2018
  78. M. M. Gor, P. M. Pathak, A. K.Samantaray, J. M. Yang, S. W. Kwak, "Fault Accommodation in Compliant Quadruped Robot through a Moving Appendage Mechanism", Mechanism and Machine Theory. pp. 228–244, Vol. 121, 2018
  79. M. M. Gor, P. M. Pathak, A. K.Samantaray, J.-M. Yang, S. W. Kwak, "Fault Tolerant Control of a Compliant Legged Quadruped Robot for Free Swinging Failure", Journal Systems and Control Engineering, pp. 161-177, Vol. 232, 2018 
  80. Ravi Shankar, Dheerendra Kumar Dwivedi, M Vasudevan, "Optimization of A-TIG Process Parameters Using Response Surface Methodology", Materials and Manufacturing Processes. pp. 709-717, Vol. 33, 2018 
  81. Shivraman T, D K Dwivedi, "Barium titanate reinforced nickel aluminium bronze surface composite by friction stir processing", Materials Science and Technology. pp. 366-377, Vol. 34, 2018 
  82. Ravi Vidyarthi, D K Dwivedi, "Microstructural and mechanical properties assessment of the P91 A-TIG weld joints", Journal of Manufacturing process. pp. 523-535, Vol. 31, 2018
  83. Gaurav Sharma, Lokesh Tiwari, Dheerendra Kumar Dwivedi, "Impulse Pressure Assisted Diffusion Bonding of Low Carbon Steel Using Silver Interlayer", Trans. Indian Institute of Metals. pp. 11-21, Vol. 71, 2018
  84. Ravi Vidyarthi, D K Dwivedi, "Microstructure evolution and Charpy toughness relationship of A-TIG weld fusion zone for varying tempering time", Trans. Ind. Inst. Metals. pp. 1287-1300, Vol. 71, 2018
  85. Sunil Sinhmar, D K Dwivedi, "A study on corrosion behavior of friction stir welded and tungsten inert gas welded AA2014 aluminium alloy", Corrosion Science. pp. 25-35, Vol. 133, 2018
  86. Amit Kumar, G. Sharma, D K Dwivedi, "TIG spot weld bonding of 409L ferritic stainless steel", International Journal of Adhesion and Adhesives. pp. 350-359, Vol. 84, 2018
  87. Anup Kumarni, D K Dwivedi, M Vasudevan, "Study of mechanism, microstructure and mechanical properties of activated flux TIG welded P91 Steel-P22 steel dissimilar metal joint", Materials Science & Engineering A. pp. 309–323, Vol. 731, 2018
  88. Chandan Pandey, Nitin Saini, Dheerendra Kumar Dwivedi, "Ductilizing of cast hypereutectic Al–17% Si alloy by FSP", Journal of Process Mechanical Engineering. pp. 696-701, Vol. 232, 2018 
  89. Naveen Sharma, Andallib Tariq, Manish Mishra, "Experimental Investigation of Flow Structure due to Truncated Prismatic Rib Turbulators Using Particle Image Velocimetry Experimental Thermal & Fluid Science", Elsevier. pp. 479-508, vol. 91, 2018
  90. Naveen Sharma, Andallib Tariq, Manish Mishra, "Experimental Investigation of Heat Transfer Enhancement in a Rectangular Duct with Pentagonal Ribs Heat Transfer Engineering", Taylor & Francis, 2018
  91. Naveen Sharma, Andallib Tariq, Manish Mishra, "Aerothermal Characteristics of Solid and Permeable Pentagonal Rib Turbulators", ASME Journal of Heat Transfer, 2018 
  92. Rituraj Singh and K.M. Singh., "On preconditioned BiCGSTAB solver for MLPG method applied to heat conduction in 3D complex geometry", Engineering Analysis with Boundary Elements, pp. 83-93, Vol. 93, 2018
  93. N. Arora, P. Kumar, M.M. Joglekar, "A modulated voltage waveform for enhancing the travel range of dielectric elastomer actuators", ASME Journal of Applied Mechanics, 2018
  94. A.K. Sharma, R.K. Godara, M.M. Joglekar, "Static and DC dynamic pull-in analysis of curled microcantilevers with a compliant support", Microsystem Technologies, 2018 
  95. A.K. Sharma, N. Arora, M.M. Joglekar, "DC dynamic pull-in instability of a dielectric elastomer balloon: An energy-based approach", Physical and Engineering Sciences. pp. 20170900, Vol. 474, 2018
  96. R.K. Godara and M.M. Joglekar, "Suppression of contact bounce in beam-type microelectromechanical switches using a feedforward control scheme", Journal of Vibration and Control. pp. 1-12, 2018
  97. M. Kumar, S. Ahmad, I.V. Singh, A.V. Rao, J. Kumar, Vikas Kumar, "Experimental and Numerical Studies to Estimate Fatigue Crack Growth Behavior of Ni-Based Super Alloy", Theoretical and Applied Fracture Mechanics. pp. 604-616, Vol. 96, 2018
  98. M. Kumar, I.V. Singh, B.K. Mishra, S. Ahmad, A.V. Rao, Vikas Kumar, "Mixed Mode Crack Growth in Elasto-Plastic-Creeping Solids using XFEM", Engineering Fracture Mechanics. pp. 489-517, Vol. 199, 2018
  99. S.K. Singh, I.V. Singh, B.K. Mishra, G. Bhardwaj, S.K. Singh, "Analysis of Cracked Plate Using Higher-Order Shear Deformation Theory: Asymptotic Crack-Tip Fields and XIGA Implementation", Computer Methods in Applied Mechanics and Engineering. pp. 594–639, Vol. 336, 2018
  100. Sunkulp Goel, Nikhil Kumar, R. Jayaganthan, I.V. Singh, D. Srivastava, "Role of shear localization in nanocrystallisation of zircaloy-2 processed by wire rolling at cryo temperature", Materials Science and Engineering: A, pp. 111–122, Vol. 718, 2018
  101. Roshan Patil, B.K. Mishra, I.V Singh, "An Adaptive Multiscale Phase Field Method for Brittle Fracture", Computer Methods in Applied Mechanics and Engineering, pp. 254–288, Vol. 329, 2018 
  102.  Singh T. and Dvivedi A., "On performance evaluation of textured tools during microchanneling with ECDM", Journal of Manufacturing Processes. pp. 699-713, Vol. 32,  2018  
  103. Kumar S. and Dvivedi A., "Fabrication of Microchannels using Rotary Tool MicroUSM: An Experimental Investigation on Tool Wear Reduction and Form Accuracy Improvement”, Journal of Manufacturing Processes. pp. 801-815, Vol. 32, 2018 
  104. Singh T. and Dvivedi A., “On pressurized feeding approach for effective control on working gap in ECDM”, Materials and Manufacturing Processes. pp. 462-473, Vol. 33, 2018  
  105.  S. Ganpule, N. Daphalapurkar, M. P. Cetingul, K. T. Ramesh, "Efect of bulk modulus on deformation of the brain under rotational accelerations," Shock Waves. pp. 127-139, Vol. 28, 2018
  106. Manish Chouhan, Sushanta Dutta; Bhupendra S More, B K Gandhi, “Flow interference of a square cylinder with an attached splitter plate at intermediate Reynolds number” J. Fluids and Structures (Elsevier). pp. 319-335, Vol. 76, 2018 
  107. M.K. Lila, A. Singhal, S.S. Banwait and I. Singh., "A Recyclability Study of Bagasse Fiber Reinforced Polypropylene Composites", Polymer Degradation and Stability. pp. 272-279, Vol. 152, 2018
  108.  R. Kumar, I. Singh., "Electric Discharge Drilling of Micro Holes In CFRP Laminates", Journal of Materials Processing Technology. pp. 150-158, Vol. 259, 2018 
  109. Sricharan Chirra, Dinesh Kumar, "Analysis of SCF under Sales Promotional Schemes: An application of interpretive structural modelling approach", International Journal of Production Research, 2018   
  110. Sricharan Chirra, Dinesh Kumar, "Evaluation of supply chain flexibility in automobile industry with Fuzzy DEMATEL approach", Global Journal of Flexible Systems Management, 2018  
  111. Dheeraj Chandra, Dinesh Kumar, "A fuzzy MICMAC analysis for improving supply chain performance of basic vaccines in developing countries", Expert Review of Vaccines. pp. 263-281, Vol. 17, 2018 
  112. Dheeraj Chandra, Dinesh Kumar, "Two-way assessment of key performance indicators to vaccine supply chain system in India", International Journal of Productivity and Performance Management, 2018
  113. Rai, A., & Upadhyay, S. H. “An integrated approach to bearing prognostics based on EEMD-multi feature extraction, Gaussian mixture models and Jensen-Rényi Divergence”, Applied Soft Computing,Elsevier Publications. pp.36-50, Vol. 71, 2018
  114. Rai, A., & Upadhyay, S. H. “Intelligent bearing performance degradation assessment and remaining useful life prediction based on self-organising map and support vector regression", Proc IMechE Part C: J Mechanical Engineering Science. pp. 1118–1132, Vol. 232, 2018
  115. K.L. Meena and D.B. Karunakar, “Development of alumina toughened zirconia nanocomposites using spark plasma sintering”, Materials Today Proceedings. pp. 16928–16935, Vol. 5, 2018
  116. Ch.S. Vidyasagar and D.B. Karunakar, "Development of 2024 AA-Yttrium composites by spark plasma sintering", IOP Conf. Series: Materials Science and Engineering. pp. 012050, Vol. 346, 2018
  117. Kumar P, Kumar A, Racic V & Erlicher S, "Modelling vertical human walking forces using self-sustained oscillator", Mechanical Systems and Signal Processing. pp. 345-363, Vol. 99, 2018
  118. Kumar P, Kumar A & Racic V, "Modeling of longitudinal human walking force using self-sustained oscillator", International Journal of Structural Stability and Dynamics. pp. 1850080, Vol. 18, 2018
  119. Kumar P, Kumar A & Erlicher S, "A nonlinear oscillator model to generate lateral walking force on a rigid flat surface", International Journal of Structural Stability and Dynamics. pp. 185002, Vol. 18, 2018
  120. Sharma SK & Kumar A, "Disturbance rejection and force tracking controller of nonlinear lateral vibrations in passenger rail vehicle using MR fluid damper", Journal of Intelligent Material Systems and Structures. pp. 279–297, Vol. 29, 2018
  121. Sharma SK & Kumar A, "Ride comfort of a higher speed rail vehicle using a magneto-rheological suspension system", Journal of Multi-body dynamics. pp. 32–48, Vol. 232, 2018
  122. Sharma SK & Kumar A, "Impact of longitudinal train dynamics on ride comfort and train operations: A simulation based study", Journal of Vibration Engineering & Technologies. pp. 197-203, Vol. 6, 2018
  123. M. Kumar, R. Kant, A. K. Das, P. K. Das, "Effect of surface tension variation of the working fluid on the performance of a  closed loop pulsating heat pipe", Heat Transfer Engineering. Vol. 40, 2018
  124. P. Kumar, P.P.S. Seerha, A.K. Das, S.K., "Mitra, Proposition of an optical arrangement for interface reconstruction between stratified liquids", Chemical Engineering Science. pp. 75-85, Vol. 183, 2018
  125. Apurbba Kumar Sharma and Radha Raman Mishra, "Challenges in microwave processing of bulk metallic materials and recent developments", AMPERE Newsletter. pp. 7-15, Vol. 96, 2018
  126. Radha Raman Mishra, and Apurbba Kumar Sharma. "Microwave heating characteristics of bulk metallic materials and role of oxides", Journal of Materials Science. pp. 16567-16584, Vol. 53, 2018
  127. Lokesh Kumar Saxena, Pramod Kumar Jain, and Apurbba Kumar Sharma. "A fuzzy goal programme with carbon tax policy for Brownfield Tyre remanufacturing strategic supply chain planning", Journal of Cleaner Production. pp. 737-753, Vol. 198, 2018
  128. Apurbba Kumar Sharma, and Radha Raman Mishra. "Role of particle size in microwave processing of metallic material systems", Materials Science and Technology. pp. 123-137, Vol. 34, 2018
  129. Radha Raman Mishra, and Apurbba Kumar Sharma. "Effect of solidification environment on microstructure and indentation hardness of Al–Zn–Mg alloy casts developed using microwave heating", International Journal of Metal casting. pp. 370-382, Vol. 12, 2018   
  130. Harpreet Kaur Aasi, Manish Mishra, "Transient Behaviour of Three-Fluid Cross-Flow Heat Exchanger Under the Influence of Temperature Non-Uniformity", ASME - Journal of Thermal Science and Engineering Applications. pp. 061012-1-15, Vol. 10, 2018
  131. Tarikayehu Amanuel, Manish Mishra, "Investigation of Thermohydraulic performance of Triple Concentric-tube Heat Exchanger with CuO/Water nanofluid: Numerical approach", Heat Transfer: Asian Research. pp. 1-22, 2018
  132. D.B.Jani, Manish Mishra, P.K.Sahoo, "Investigations on Effect of Operational Conditions on Performance of Solid Desiccant Based Hybrid Cooling System in Hot And Humid Climate", Thermal Science and Engineering Progress. pp. 76-86, Vol. 7, 2018
  133. D.B.Jani, Manish Mishra, P.K.Sahoo, "Performance Analysis of a Solid Desiccant Assisted Hybrid Space Cooling System Using TRNSYS", Journal of Building Energy. pp. 26-35, Vol. 19, 2018
  134. Naveen Sharma, Andallib Tariq, Manish Mishra, "Detailed Heat Transfer and Friction Factor Characteristics in a Rectangular Duct with Alternate Solid and Converging-Slit Ribs", Experimental Heat Transfer. pp. 1-19, Vol. 0, 2018
  135. Naveen Sharma, Andallib Tariq, Manish Mishra, "Detailed Heat Transfer and Fluid Flow Investigation in a Rectangular Duct with Truncated Prismatic Ribs", Experimental Thermal and Fluid Science. pp. 383-396, Vol. 96, 2018
  136. Naveen Sharma, Andallib Tariq, Manish Mishra, "Experimental Investigation of Flow Structure due to Truncated Prismatic Rib Turbulators Using Particle Image Velocimetry", Experimental Thermal & Fluid Science, Elsevier. pp. 479-508, Vol. 18, 2018
  137. Naveen Sharma, Andallib Tariq, Manish Mishra, "Aerothermal Characteristics of Solid and Permeable Pentagonal Rib Turbulators", ASME Journal of Heat Transfer. pp. 061901-1-14, Vol. 140, 2018
  138. D.B.Jani, Manish Mishra, P.K.Sahoo, "A Critical Review on Application of Solar Energy as Renewable Regeneration Heat Source in Solid Desiccant – Vapor Compression Hybrid Cooling System", Journal of Building Energy. pp. 107-124, Vol. 18, 2018
  139.  S. Ganpule, N. Daphalapurkar, M. P. Cetingul, K. T. Ramesh, “Effect of Bulk Modulus on Deformation of the Brain Under Rotational Accelerations," Shock Waves, 28 (1), 127-139, 2018. 
# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.