Publication-Journal2017 - Department of Mechanical and Industrial Engineering,Indian Institute of Technology Roorkee
Publication-Journal2017

2017

  1. Dheeraj Chandra & Dinesh Kumar, "Analysis of vaccine supply chain issues using ISM approach", International Journal of Logistics Systems and Management, 2017
  2. Sricharan Chirra & Dinesh Kumar, "Analysis of supply chain issues under sales promotional schemes using FAHP", International Journal of Logistics Systems and Management, 2017
      
  3. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora & Rajeev Mehta, "Analysis of mechanical behaviour of heat affected zone on ferritic side of bimetallic welds under thermal fatigue conditions", Materials Science Forum. pp. 41- 44, Vol. 880, 2017  
  4. Lalit Thakur & Navneet Arora, "A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating", Surface and Coatings Technology. pp. 860-871, Vol. 309, 2017
  5. Deepak Bhandari, Rahul Chhibber, Navneet Arora & Rajeev Mehta, "Investigations on design and formulation of buttering layer electrode coatings for bimetallic welds", Materials Science Forum. pp. 37-40, Vol. 880, 2017 
  6. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora & Rajeev Mehta, "Experimental analysis of thermal fatigue in bimetallic welds", Materials Science Forum. pp. 124-127 Vol. 880, 2017
  7.  K. Debnath & I. Singh, "Low-Frequency Modulation-Assisted Drilling of CarbonEpoxy Composite Laminates", Journal of Manufacturing Processes. pp. 262- 273, Vol. 25, 2017  
  8. R. Kumar, A. Singh & I. Singh.,  "Electric Discharge Hole Grinding in Hybrid Metal Matrix Composite", Materials and Manufacturing Processes. pp. 127- 134, Vol. 32, 2017 
  9. R. Kumar & I. Singh., "Productivity Improvement of Micro EDM Process by Improvised Tool", Precision Engineering, 2017  
  10. S. Ganpule, N. Daphalapurkar, K. T. Ramesh, A. Knutsen, D. Pham, P. Bayly & J. Prince, "A Three-Dimensional Computational Human Head Model That Captures Live Human Brain Dynamics", Journal of Neurotrauma. pp. 2154-2166, Vol. 34, 2017  
  11. Singh, S., Singh, I. and Dvivedi, A., “Design and development of novel cost effective casting route for production of metal matrix composites (MMCs)”, International Journal of Cast Metals Research. pp. 356-364, Vol. 30, 2017  
  12. Sisay Filketu, Akshay Dvivedi & Birhanu Beshah Abebe, "Decision-making on job satisfaction improvement programmes using fuzzy QFD model: a case study in Ethiopia", Total Quality Management & Business Excellence. pp. 1354693, 2017 
  13. A.S. Shedbale, I.V. Singh, B.K. Mishra & Kamal Sharma, "Ductile Failure Modeling and Simulations Using Coupled FE-EFG Approach", International Journal of Fracture. pp. 183-209, Vol. 203, 2017 
  14. Vasanth Balakrishnan, P. Roshan, Sunkulp Goel, R. Jayaganthan & I. V. Singh, "Experimental and XFEM Simulation of Tensile and Fracture Behavior of Al 6061 Alloy Processed by Severe Plastic 6061 Alloy Processed by Severe Plastic Deformation", Metallography, Microstructure, and Analysis. pp. 55-72,  Vol. 6, 2017 
  15. Roshan Patil, B.K. Mishra & I.V Singh, "A New Multiscale XFEM for the Elastic Properties Evaluation of Heterogeneous Materials", International Journal of Mechanical Sciences. pp. 277-287, Vol. 122, 2017
  16. Manik Bansal, I.V Singh, B.K. Mishra, Kamal Sharma & I.A. Khan, "A Stochastic XFEM Model for the Tensile Strength Prediction of Heterogeneous Graphite based on Microstructural Observations", Journal of Nuclear Materials. pp. 143- 157,  Vol. 487, 2017
     
  17. S.K. Singh, I. V. Singh, B.K. Mishra, G. Bhardwaj & T.Q. Bui, "Efficient and Accurate Bézier Extraction based T-spline XIGA for Crack Simulations", Theoretical and Applied Fracture Mechanics, pp. 74-96,  Vol. 88, 2017
  18. Xiaofei Hu, Tinh Quoc Bui, Jining Wang, Weian Yao, Lan Hoang That Ton, Indra Vir Singh, Satoyuki Tanaka, "A new cohesive crack tip symplectic analytical singular element involving plastic zone length for fatigue crack growth prediction under variable amplitude cyclic loading", European Journal of Mechanics - A/Solids. pp. 79-90,  Vol. 65, 2017
  19. Manik Bansal, I.V Singh, B.K. Mishra, Kamal Sharma, I.A. Khan, "A Numerical Prediction of Flexural Strength Probability for NBG-18 Nuclear Grade Graphite using Strength Pair Model", The Journal of Strain Analysis for Engineering Design. pp. 204–211,  Vol. 52, 2017
  20. Manik Bansal, I.V Singh, B.K. Mishra, Kamal Sharma, I.A. Khan, "A two-scale stochastic framework for predicting failure strength probability of heterogeneous materials", Composite Structures. p. 294-325, Vol. 179, 2017  
  21. A.S. Shedbale, I.V. Singh, B.K. Mishra, "Heterogeneous and Homogenized Models for Predicting the Indentation Response of Particle Reinforced Metal Matrix Composites", International Journal of Mechanics and Materials in Design. pp. 531-552,  Vol.13, 2017
  22. A.K. Sharma, S. Bajpayee, D.M. Joglekar, and M.M. Joglekar, "Dynamic instability of dielectric elastomer actuators subjected to unequal biaxial prestress", Smart Materials and Structures. pp. 115019, Vol. 26, 2017  
  23. R.K. Godara and M.M. Joglekar, "All eviation of residual oscillations in electrostatically actuated variable-width microbeams using a feedforward control strategy", Microsystem Technologies. pp. 4441-4457, Vol. 23, 2017 
  24. Rituraj Singh and K.M. Singh. "On preconditioned BiCGSTAB solver for MLPG method applied to heat conduction in complex geometry", Numerical Heat Transfer. Part B: Fundamentals. pp. 377-391, Vol. 72, 2017 
  25. D.B.Jani, Manish Mishra, P.K.Sahoo, "A Critical Review on Solid Desiccant Based Hybrid Cooling Systems", International Journal of Air-Conditioning and Refrigeration (World Scientific), pp. 1730002:1-10, vol. 25, 2017 
  26. D.B.Jani, Manish Mishra, P.K.Sahoo, "Application of Artificial Neural Network for Predicting Performance of Solid Desiccant Cooling Systems - A Review Renewable & Sustainable Energy Reviews", Elsevier, pp. 352-366, vol. 80, 2017
  27. R. Vidyarthi, D K Dwivedi, "Analysis of the Corrosion Behavior of an A-TIG welded SS 409 Weld Fusion Zone", Journal of Materials Engineering and Performance. pp. 5375-5384, Vol. 26, 2017  
  28. Yogesh Kumar Singla, Rahul Chhibber, Navneet Arora, Karanpreet Singh and Kishore Khanna, "On the wear behavior of Fe-xCr-4Mn-3C hardfacing alloys", Transactions of Indian Institute of Metals. pp. 1555-1561, Vol. 70, 2017
  29. Yogesh Kumar Singla, DK Dwivedi, "Navneet Arora, Modeling the impact–sliding wear characteristics of rare earth additive iron-based hardfacing alloys", Journal of Engineering Tribology. pp. 1483-1499, Vol. 231, 2017
  30. G Sharma, D K Dwivedi, P K Jain, "Characterization and strain hardening behavior of friction stir welded ferritic stainless steel", Journal of Materials Performance & Engineering. pp. 5997-6005, Vol. 26, 2017  
  31. Yogesh Singla, D K Dwivedi, N Arora, "Influence of niobium on the microstructure and wear resistance of iron-based hardfacings produced by pre-placement technique - A novel approach", International Journal of Advanced Manufacturing Technology. pp. 2667-2674, Vol. 93, 2017
  32. G Sharma, D K Dwivedi, "Effect of pressure pulsation on bond interface characteristics of 409 ferritic stainless steel diffusion bonds", Vacuum. pp. 152-158, Vol. 146, 2017 
  33. G Sharma, D K Dwivedi, "Effect of pressure pulsation on bond interface characteristics of 409 ferritic stainless steel diffusion bonds", Vacuum. pp. 152-158, Vol. 146, 2017
  34. Shivraman Thaplial, Dheerendra Kumar Dwivedi, "On Cavitation Erosion Behavior of Friction Stir Processed Surface of Cast Nickel Aluminium Bronze", Wear. pp. 1030-1042, Vol. 376, 2017
  35. Gaurav Sharma, Dheerendra Kumar Dwivedi, "Diffusion bonding of pre-friction treated structural steel with reversion of deformation induced grains", Materials Science & Engineering A. pp. 393-399, Vol. 696, 2017
  36. Ravi Shankar, Dheerendra Kumar Dwivedi, "Study of microstructure and mechanical property relationships of A-TIG welded P91-316L dissimilar steel joint", Materials Science & Engineering A. pp. 249-257, Vol. 695, 2017
  37. Gaurav Sharma, Dheerendra Kumar Dwivedi, "Microstructure and mechanical properties of dissimilar steel joints developed using Friction Stir Welding", International Journal of Advanced Manufacturing Technology. pp. 1299-1307, Vol. 88, 2017
  38. Vijay Kumar Dalla and Pushparaj Mani Pathak, "Curve-Constrained Collision-Free Trajectory Control of Hyper-Redundant Planar Space Robot", Journal Systems and Control Engineering. pp. 282-298, Vol. 231, 2017 
  39. Vivek Kumar, Vikas Rastogi, Pushparaj Pathak, "Dynamic Analysis of Vehicle-Track Interactions Due To Wheel Flat Using Bond Graph", Journal of Multibody Dynamics, 2017  
  40. Blankenhagel, P., Wehrstedt, K.D., Mishra K.B., Xu, S., Steinbach, J., "A new model for organic peroxide fireballs", Journal of Loss Prevention in Process Industries. pp. 237-242, Vol. 50, 2017  
  41. Radha Raman Mishra, and Apurbba Kumar Sharma. "Effect of susceptor and mold material on microstructure of in-situ microwave casts of Al-Zn-Mg alloy", Materials & Design. pp. 428-440, Vol. 131, 2017
  42. Apurbba Kumar Sharma and Radha Raman Mishra, "Role of particle size in microwave processing of metallic material systems", Journal of Materials Science and Technology. pp.1-15, 2017 
  43. Radha Raman Mishra, and Apurbba Kumar Sharma. "On melting characteristics of bulk Al-7039 alloy during in-situ microwave casting", Applied Thermal Engineering. pp. 660-675, Vol. 111, 2017
  44. Radha Raman Mishra and Apurbba Kumar Sharma, “Structure-property correlation in Al-Zn-Mg alloy cast developed through in-situ microwave casting”, Materials Science and Engineering A, 2017  
  45. Amit Bansal, Apurbba Kumar Sharma, Pradeep Kumar, “Galvanic corrosion behaviour of microwave welded and post-weld heat treated Inconel-718 joints”, Journal of Materials Engineering and Performance, 2017 
  46. Mudimallana Goud, and Apurbba Kumar Sharma. "On performance studies during micromachining of quartz glass using electrochemical discharge machining", Journal of Mechanical Science and Technology. pp. 1365-1372, Vol. 31, 2017
  47. Sunny Zafar and Apurbba Kumar Sharma, “Microstructure and mechanical properties of microwave post processed Ni coating”. Journal of Materials Engineering and Performance, 2017 
  48. Dheerendra Gamit, Radha Raman Mishra and Apurbba Kumar Sharma, “Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterisation”, Journal of Manufacturing Processes, pp. 158-168, Vol. 27, 2017
      
  49. Sujay Negi, Ravi Kumar, Prasanna Majumdar , D. Mukopadhyay, "Full Length Channel Pressure Tube Sagging under Completely Voided Full Length Pressure Tube of an Indian",  PHWR, pp.236-22, Vol. 313, 2017
      
  50. Sujay Negi, Ravi Kumar, Prasanna Majumdar , D. Mukopadhyay, "Full length channel pressure tube sagging study under postulated LOCA with un-availability of ECCS in an Indian PHWR, Nuclear Engineering Design. pp. 361-373,  Vol. 320, 2017
  51. A. Chaudhary, Akhilesh Gupta, Kumar, S., Ravi Kumar, "Thermal Environment Induced by Jatropha Oil Pool Fire in a Compartment", Journal of Thermal Analysis and Calorimetry. pp. 2397-2415, Vol. 127,  2017
  52. Chitranjan, Ravi Kumar, Akhilesh Gupta, Barun Chatterjee, "Rewetting of Vertical Hot Surface with Round Water Jet Impingement Cooling", Heat and Mass Transfer. Vol 18 , 2017 
  53. Avinash Parashar, Divya Singh, "Molecular dynamics based study of an irradiated single crystal of niobium", Computational materials science. pp. 48-54, Vol. 131, 2017 
  54. Rajasekaran G., Avinash Parashar, "Enhancement of Fracture Toughness of Graphene via Crack Bridging with Stone-Thrower-Wales Defects", Diamond and related materials. pp. 90-99, Vol. 74, 2017 
  55. Rajesh Kumar, Avinash Parashar, "Fracture toughness enhancement of h-BN monolayers via hydrogen-passivation of crack surface", Nanotechnology. pp. 165702, Vol. 28, 2017
  56. B. K. Rana, A. K. Das, P. K. Das, “Study of interaction pattern between bubbles at three inline orifices in a submerged pool”, Chemical Engineering Science. pp. 41-54, Vol. 168, 2017
  57. P. Kumar, A. K. Das, S. Mitra, "Bending and Growth of Entrained Air Filament under Converging and Asymmetric Rotational Fields", Physics of Fluids. pp. 022101-1-13, Vol. 29, 2017 
  58. B. K. Rana, A. K. Das, P. K. Das, "Towards the understanding of bubble-bubble interaction upon formation at submerged orifices: a numerical approach", Chemical Engineering Science. pp. 316-328, Vol 161, 2017 
  59. A. Deep, C. S. Meena, A. K. Das, "Interaction of Asymmetric Films around Boiling Cylinder Arrray: Homogeneous Interface to Chaotic Phenomenon", Journal of Heat Transfer. pp. 041502-1-11, Vol. 139, 2017 
  60. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini, “Effect of creep phenomena on room-temperature tensile properties of cast & forged P91 steel”, Engineering Failure Analysis. pp. 385-396., Vol. 79, 2017
      
  61. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini, “Diffusible hydrogen level in deposited metal and their effect on tensile properties and flexural strength of P91 Steel”, Journal of Engineering Maters and Technology. pp. 1-11, Vol. 139, 2017 
  62. Chandan Pandey, Nitin Saini, Manas Mohan Mahapatra, Pradeep Kumar, “Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes”, Engineering Failure Analysis. pp. 131-147, Vol. 71, 2017
  63. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini, “Effect of Normalization and Tempering on Microstructure and Mechanical Properties of V-Groove and Narrow-groove P91 Pipe Weldments”, Material Science and Engineering A. pp. 39-49, Vol. 685, 2017 
  64. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini, “Effect of Normalization and Tempering on Microstructure and Mechanical Properties of V-Groove and Narrow-groove P91 Pipe Weldments”, Material Science and Engineering A. pp. 39-49, Vol. 685, 2017  
  65. Chandan Pandey, Anoj Giri, Manas Mohan Mahapatra, Pradeep Kumar, “Characterization of Microstructure of HAZs in As-Welded and Service Condition of P91 Pipe Weldments”, Metals and Materials International, pp. 148- 162, Vol. 23, 2017 
  66. Ambrish Maurya and Pradeep Kumar Jha, “Influence of electromagnetic stirrer position on fluid flow and solidification in continuous casting mold”. Applied Mathematical Modelling, 2017 
  67. Ambrish Maurya and Pradeep Kumar Jha, “Numerical investigation of M-EMS for fluid flow and solidification”. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2017 
  68. Aditya Kumar, Vivekanand & Sudhakar Subudhi, “Cooling and Dehumidification using Vortex tube”, Applied Thermal Engineering. pp. 181-193, Vol. 122, 2017 
  69. L Gangadhara Kiran Kumar, P Muthukumar & Sudhakar Subudhi, “Thermal comfort analysis of hostels in National Instituteof Technology Calicut, India”, Sadhana (Springer), pp. 63-73, Vol. 42, 2017
  70. Devang Marvania & Sudhakar Subudhi, “Compressed Air Powered Engine”, Renewable and Sustainable Energy Reviews. pp. 1119-1130, Vol. 70, 2017
  71. Rajesh Choudhury, Deepak Khurana, Aditya Kumar & Sudhakar Subudhi, “Stability analysis of Al2O3/Water nanofluids”, Journal of Experimental Nanoscience. pp. 140-151, Vol. 12, 2017
  72. Deepak Khurana, Rajesh Choudhury & Sudhakar Subudhi, “A critical review of forced convection heat transfer and pressure drop of Al2O3, TiO2 and CuO Nanofluids”, Heat and Mass Transfer. pp. 343-361, Vol. 53, 2017 
  73. Sharma S.K., Kumar A., "Ride performance of a high speed rail vehicle using controlled semi active suspension system", Smart Materials and Structures. pp. 055026, Vol. 26, 2017 
  74. Sharma S.K., Kumar A., "Ride comfort of a higher speed rail vehicle using a magnetorheological suspension system", Journal Multi-body Dynamics. pp. 1–17, Vol. 0, 2017 
     
  75. Kumar P., Kumar A., Erlicher S., "A nonlinear oscillator model to generate lateral walking force on a rigid flat surface", Int. Journal of Structural Stability and Dynamics, 2017 
  76. Ambrish Maurya and Pradeep Kumar Jha, “Numerical investigation of M-EMS for fluid flow and solidification”. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2017 
  77. Ambrish Maurya and Pradeep Kumar Jha, “Influence of electromagnetic stirrer position on fluid flow and solidification in continuous casting mold”. Applied Mathematical Modelling, (Elsevier), 2017  
  78.  Chandan Pandey, Anoj Giri, Manas Mohan Mahapatra, Pradeep Kumar,, “Characterization of Microstructure of HAZs in As-Welded and Service Condition of P91 Pipe Weldments”, Metals and Materials International, pp. 148- 162, Vol. 23, 2017  
  79. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini,, “Effect of Normalization and Tempering on Microstructure and Mechanical Properties of V-Groove and Narrow-groove P91 Pipe Weldments”, Material Science and Engineering A. pp. 39-49, Vol. 685, 2017  
  80. Chandan Pandey, Nitin Saini, Manas Mohan Mahapatra, Pradeep Kumar,, “Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes”, Engineering Failure Analysis. pp. 131-147, Vol. 71, 2017 
  81. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini,, “Diffusible hydrogen level in deposited metal and their effect on tensile properties and flexural strength of P91 Steel”, Journal of Engineering Maters and Technology. pp. 1-11, Vol. 139, 2017
  82. Chandan Pandey, Manas Mohan Mahapatra, Pradeep Kumar, Nitin Saini,, “Effect of creep phenomena on room-temperature tensile properties of cast & forged P91 steel”, Engineering Failure Analysis, pp. 385-396, Vol. 79, 2017 
  83. M. Ahmadlouydarab, C. Lan, A. K. Das, Y. Ma, "Coalescence of sessile microdroplets subject to a wettability gradient on a solid surface" Physical Review E, 2017  
  84.  A. Deep, C. S. Meena, A. K. Das, "Interaction of Asymmetric Films around Boiling Cylinder Arrray: Homogeneous Interface to Chaotic Phenomenon" Journal of Heat Transfer. pp. 041502-1-11, Vol 139, 2017  
  85. B. K. Rana, A. K. Das, P. K. Das, "Towards the understanding of bubble-bubble interaction upon formation at submerged orifices: a numerical approach", Chemical Engineering Science. pp. 316-328, Vol. 161, 2017
  86. P. Kumar, A. K. Das, S. Mitra, "Bending and Growth of Entrained Air Filament under Converging and Asymmetric Rotational Fields", Physics of Fluids. pp. 022101-1-13, Vol. 29, 2017
  87. B. K. Rana, A. K. Das, P. K. Das, “Study of interaction pattern between bubbles at three inline orifices in a submerged pool”, Chemical Engineering Science. pp. 41-54, Vol. 168, 2017
  88. C. S. Meena, A. Deep, A. K. Das “Understanding of interactions of bubbles generated at neighboring nucleation sites”, Heat Transfer Engineering, 2017
  89. B. K. Rana, A. K. Das, P. K. Das, " Collapse of a Taylor bubble at free surface", Multiphase Science and Technology, 2017
  90. Rajesh Kumar, Avinash Parashar, "Fracture toughness enhancement of h-BN monolayers via hydrogen-passivation of crack surface", Nanotechnology. pp. 165702, Vol. 28, 2017  
  91. Rajasekaran G., Avinash Parashar, "Enhancement of Fracture Toughness of Graphene via Crack Bridging with Stone-Thrower-Wales Defects", Diamond and related materials. pp. 90-99, Vol. 74, 2017
  92. Avinash Parashar & Divya Singh, "Molecular dynamics based study of an irradiated single crystal of niobium", Computational materials science. pp. 48-54, Vol. 131, 2017
  93. Chitranjan, Ravi Kumar, Akhilesh Gupta, Barun Chatterjee, "Rewetting of Vertical Hot Surface with Round Water Jet Impingement Cooling", Heat and Mass Transfer. Vol. 18 , 2017 
  94. Dheerendra Gamit, Radha Raman Mishra and Apurbba Kumar Sharma, “Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterisation”, Journal of Manufacturing Processes. pp. 158-168, 2017 
  95. Sunny Zafar and Apurbba Kumar Sharma, “Microstructure and mechanical properties of microwave post processed Ni coating”. Journal of Materials Engineering and Performance, 2017 
  96. Goud, M. and Apurbba Kumar Sharma, “On performance studies during micromachining of quartz glass using electrochemical discharge machining”, Journal of Mechanical Science and Technology, pp. pp.1365-1372, Vol. 31, 2017 
  97. Amit Bansal, Apurbba Kumar Sharma, Pradeep Kumar, “Galvanic corrosion behaviour of microwave welded and post-weld heat treated Inconel-718 joints”, Journal of Materials Engineering and Performance, 2017 
  98. Radha Raman Mishra and Apurbba Kumar Sharma, “Structure-property correlation in Al-Zn-Mg alloy cast developed through in-situ microwave casting”, Materials Science and Engineering A, 2017 
  99. Radha Raman Mishra and Apurbba Kumar Sharma, “On melting characteristics of bulk Al-7039 alloy during in-situ microwave casting”, Applied Thermal Engineering, 111. pp. 670–685, 2017  
  100.  Surya Kumar, Andallib Tariq, "Steady state experimental investigation of thermal contact conductance between curvilinear contacts using Liquid Crystal Thermography", Int. Journal Therm. Sci. pp. 53–68, Vol. 118, 2017
     
  101. Rai, A., & Upadhyay, S. H., "The use of MD-CUMSUM and NARX neural network for anticipating the remaining useful life of bearings", Measurement, Elsevier Publications. pp. 397-410, Vol. 111, 2017
  102. Rai, A., & Upadhyay, S. H., "Bearing performance degradation assessment based on a combination of empirical mode decomposition and k-medoids clustering", Mechanical Systems and Signal Processing, Elsevier Publications. pp. 16–29, Vol. 93, 2017
  103. Sandhya Verma, Ramesh Chandra, D K Dwivedi, "Cavitation Erosion Behavior of Nitrogen Ion Implanted 13Cr4Ni Steel", International journal of Trans. Of Indian Institute of Metals. pp. 957-965, Vol. 70, 2017
  104. Chaitanya Sharma, Vikas Upadhyay, D K Dwivedi, Pradeep Kumar, "Mechanical properties of friction stir welded armor grade Al-Zn- Mg alloy joints", Transactions of Nonferrous Metals Society of China. pp. 493−506, Vol. 27, 2017
  105. P K Sood, R Sehgal, D K Dwivedi, "Machinability of hypereutectic cast Al–Si alloys processed by SSM processing technique", Sadhana. pp. 365-378, Vol. 42, 2017
  106. Ravi Shankar, Dheerendra Kumar Dwivedi, "Influence of M-TIG and A-TIG Welding Process on Microstructure and Mechanical behaviour of 409 Ferritic Stainless Steel", Materials Engineering and Performance. pp. 1391-1403, Vol. 26, 2017
  107. Gaurav Sharma & Dheerendra Kumar Dwivedi, "Structure and Properties of Friction Stir Weld Joints of Structural Steel", Trans. Ind. Inst. Of Metals. pp. 201-208, Vol. 70, 2017
  108. Sunil Sinhmar & D K Dwivedi, "Enhancement of mechanical properties and corrosion resistance of friction stir welded joint of AA2014 using water cooling", Materials Science & Engineering A. pp. 413-422, Vol. 684, 2017
  109. Y Singla, N Arora, D K Dwivedi, "Dry Sliding Adhesive Wear Characteristics of Fe-based Hardfacing Alloys with different CeO 2 Additives–A Statistical Analysis", Tribology International. pp. 229-240, Vol. 105, 2017 
  110. Sarojrani Pattnaik, P.K. Jha and D.B. Karunakar, "A novel method of increasing ceramic shell permeability and optimizing casting shrinkage and tensile strength of the investment cast parts",Journal of Engineering Manufacture. pp. 377–388, Vol. 231, 2017
  111. N. Bhadouria, P. Kumar, L. Thakur, S. Dixit & Navneet Arora, "A study on micro-hardness and Tribological behaviour of Nano-WC–co–Cr/multi-walled carbon nano-tubes reinforced AZ91D magnesium matrix surface composites", Transactions of Indian Institute of Metals. pp. 2477-2483, Vol. 70, 2017
  112. N. Bhadouria, L. Thakur, P. Kumar & Navneet Arora, "An investigation of normal and submerged condition on microstructural and tribological properties of friction stir processed AZ91-D magnesium alloy", Canadian Metallurgical Quarterly. pp. 94-103, Vol. 56, 2017
  113. Yogesh Kumar Singla, D.K. Dwivedi & Navneet Arora, "Modeling the impact-sliding wear characteristics of rare earth additive iron-based hardfacing alloys", Journal of Engineering Tribology. pp. 1486-1499, Vol. 231, 2017
  114. Yogesh Kumar Singla, Navneet Arora & D.K. Dwivedi, "Dry sliding adhesive wear characteristics of Fe-based hardfacing alloys with different CeO2 additives – A statistical analysis", Tribology International. pp. 229-240, Vol. 105, 2017
  115. Kumar P, Kumar A & Erlicher S, "A modified hybrid Van der Pol-Duffing-Rayleigh oscillator for modelling the lateral walking force on a rigid floor", Physica D: Nonlinear Phenomena. pp. 1-14, Vol. 358, 2017
  116. Sharma, SK & Kumar, A, "Impact of electric locomotive traction of the passenger vehicle Ride quality in longitudinal train dynamics in the context of Indian railways", Mechanics & Industry. Vol. 18, 2017
  117. Rajesh Kumar, Avinash Parashar, "Dislocation assisted crack healing in h-BN nanosheets", PCCP, pp. 21739-21747, Vol. 19, 2017
  118. Akarsh Verma, Avinash Parashar, "Effect of STW defects on mechanical properties and fracture toughness of pristine and hydrogenated graphene", PCCP, pp. 16023 – 6037, Vol. 19, 2017
  119. P. Seerha, P. Kumar, A. K. Das, S. Mitra, “Proposition of Stair Climb of a Drop using Chemical Wettability Gradient”, Physics of Fluids. pp. 072103, Vol. 29, 2017
  120. V. Sanjay, A.K. Das, "On Air Entrainment in a Water pool by Impingement of a Jet", AIChE Journal. pp. 5169–5181, Vol. 63, 2017
  121. P. Kumar, A. K. Das, S. K. Mitra, “Air entrainment driven by a converging rotational field in a viscous liquid”, Physics of Fluids. pp. 102104, Vol. 29, 2017
  122. V. Sanjay, A. K. Das, “Formation of liquid chain by collision of two laminar jets,” Physics of Fluids. pp. 112101, Vol. 29, 2017
  123. L. Rohilla, A. K. Das, “On Transformation of a Taylor Bubble to an Asymmetric Sectorial Wrap in an Annuli”, Industrial & Engineering Chemistry Research. pp. 14384-14395, Vol. 56, 2017
  124. S. Pal, A. M. Miqdad, S. Datta, A. K. Das, P. K. Das, " Control of Drop Impact and Proposal of Pseudo-superhydrophobicity Using Electrostatics", Industrial & Engineering Chemistry Research. pp. 11312-11319, Vol. 56, 2017
  125. Rahul Tarodiya and B. K Gandhi, “Hydraulic Performance and Erosive Wear of Centrifugal Slurry Pumps - A review”, Powder Technology. pp. 27–38, Vol. 305, 2017
  126. Rahul Goyal, Michel Cervantes and B. K. Gandhi, “Vortex rope formation in a high head model Francis turbine”, ASME Journal of Fluids Engineering. pp. 041102, Vol. 139, 2017
  127. Rahul Goyal, Michel Cervantes and B. K. Gandhi, “Characteristics of Synchronous and Asynchronous modes of fluctuations in Francis turbine draft tube during load variation”,  International Journal of Fluid Machinery and Systems. pp. 164-175, Vol. 10, 2017
  128. Arun Kumar, B. K. Gandhi, Praveen Kumar Kulkarni, “Effect of Misalignment of Penstocks on Pressure Loss”, Journal of Pipeline Systems Engineering and Practice, ASCE, pp. 04017012, Vol. 8, 2017
  129. Rahul Goyal, Chirag Trivedi, B. K. Gandhi and Michel Cervantes, “Numerical simulation and validation of a high head Francis turbine at part load operating condition”, The Institution of Engineers (I), pp. 557-570, Vol. 99, 2017
  130. Rahul Goyal, B. K. Gandhi and Michel Cervantes, “Experimental study of mitigation of a spiral vortex breakdown at high Reynolds number under an adverse pressure gradient”, Physics of Fluids. pp. 104104, Vol. 29, 2017
  131. Dhirendra Gamit, Radha Raman Mishra, and Apurbba Kumar Sharma. "Joining of mild steel pipes using microwave hybrid heating at 2.45 GHz and joint characterization", Journal of Manufacturing Processes. pp. 158-168, Vol. 27, 2017
  132. Sunny Zafar, and Apurbba Kumar Sharma. "Microstructure and Mechanical Properties of Microwave Post-processed Ni Coating", Journal of Materials Engineering and Performance. pp. 1382-1390, Vol. 26, 2017
  133. Amit Bansal, Apurbba Kumar Sharma, and Pradeep Kumar. "Galvanic corrosion behavior of microwave welded and post-weld heat-treated Inconel-718 joints", Journal of Materials Engineering and Performance. pp. 2322-2330, Vol. 26, 2017
  134. Radha Raman Mishra, and Apurbba Kumar Sharma. "Structure-property correlation in Al–Zn–Mg alloy cast developed through in-situ microwave casting", Materials Science and Engineering: A. pp. 532-544, Vol. 688, 2017
  135. Amit Bansal, Sunny Zafar, and Apurbba Kumar Sharma. "Influence of heat treatment on microstructure of Inconel 718 microwave clads", Surface Engineering. pp. 167-174, Vol. 33, 2017  
  136. D.B.Jani, Manish Mishra, P.K.Sahoo, "Application of Artificial Neural Network for Predicting Performance of Solid Desiccant Cooling Systems - A Review"Renewable & Sustainable Energy Reviews. pp. 352-366, Vol. 80, 2017
  137. D.B.Jani, Manish Mishra, P.K.Sahoo, "A Critical Review on Solid Desiccant Based Hybrid Cooling Systems"International Journal of Air-Conditioning and Refrigeration (World Scientific), pp. 1730002:1-10, Vol. 25, 2017
  138. S. Ganpule, N. Daphalapurkar, K. T. Ramesh, A. Knutsen, D. Pham, P. Bayly, J. Prince, “A Three-Dimensional Computational Human Head Model that Captures Live Human Brain Dynamics," Journal of Neurotrauma, 34(13):2154-2166, 2017. Featured as high impact article by the journal.
# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.