Publication-Journal2016 - Department of Mechanical and Industrial Engineering,Indian Institute of Technology Roorkee
Publication-Journal2016

2016

  1. K. B. Mishra, "Multiple BLEVE's and fireballs of gas bottles: Case of a Russian road carrier accident", Journal of Loss Prevention in process Industries.  pp. 60-67, Vol. 41, 2016   
  2. Radha Raman Mishra & Apurbba Kumar Sharma. "On mechanism of in-situ microwave casting of aluminium alloy 7039 and cast microstructure", Materials & Design. pp. 97-106, Vol. 112, 2016
  3. Chitranjan, Ravi Kumar, Akhilesh Gupta & Barun Chatterjee, "Determination of Rewetting Velocity during Jet Impingement Cooling of Hot Vertical Rod", Journal Thermal Analysis and Calorimetry. pp. 861–871, Vol. 123, 2016 
  4. A.K. Khatua, Parmanand Kumar, H.N. Singh & Ravi Kumar, "Measurement of enhanced heat transfer coefficient with perforated twisted tape inserts during condensation of R‑245fa", Heat and Mass Transfer. pp. 683-692, Vol. 52, 2016 
  5. Mithlesh Kumar, D. Mukhopadhyay, A. K. Sen & Ravi Kumar, "Radial Jet Induced Rewetting Study for Heated Rod", Experimental Thermal and Fluid Science. pp. 283–293, Vol. 79, 2016 
  6. A. Chaudhary, Akhilesh Gupta, Kumar, S. & Ravi Kumar, "Thermal environment induced by jatropha oil pool fire in a compartment", Journal of Thermal Analysis and Calorimetry, 2016
  7. Chitranjan, Ravi Kumar, Akhilesh Gupta & Barun Chatterjee, "Rewetting of Hot Vertical Rod during Jet Impingement Surface Cooling", Heat and Nass Transfer. pp. 1203–1217, Vol. 52, 2016 
  8. D.B.Jani, Manish Mishra & P.K.Sahoo, "Exergy Analysis of Solid Desiccant- Vapor Compression Hybrid Air Conditioning System", International Journal of Exergy (Inderscience). pp. 517-535, Vol. 20, 2016   
  9. D.B.Jani, Manish Mishra & P.K.Sahoo, "Experimental investigation on solid desiccant - vapor compression hybrid air- conditioning system in hot and humid weather", Applied Thermal Engineering.  pp. 556-564, Vol. 104, 2016
  10. Sanjay Kumar Singh, Manish Mishra & P. K. Jha, "Performance of Co-Current and Counter-Current Parallel Flow Three-Fluid Heat Exchanger Due to Perturbations in Flow", International Journal of Global Energy Issues (Inderscience).  pp. 144-156, Vol. 39, 2016  
  11. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Prediction of Solid Desiccant – Vapor Compression Hybrid Air-Conditioning System Using Artificial Neural Network Energy", pp. 618-629, Vol. 113, 2016  
  12. D.B.Jani, Manish Mishra & P.K.Sahoo, "Solid Desiccant Air Conditioning - A State of the Art Review Renewable & Sustainable Energy", Reviews. pp. 1451–1469, Vol. 60, 2016   
  13. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Analysis of Hybrid Solid Desiccant Vapour Compression Air- Conditioning System in Hot and Humid Weather of India", Building Services Engineering Research and Technology (SAGE). pp-523-538, Vol. 37,  2016 
  14. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Prediction of Rotary Solid Desiccant Dehumidifier in Hybrid Air-Conditioning System Using Artificial Neural Network", Applied Thermal Engineering. pp. 1091-1103, Vol. 98, 2016  
  15. Rajasekaran G. & Avinash Parashar, "Effect of point and line defects on the properties of graphene", Critical reviews in solid state and materials sciences. pp. 46-70, Vol. 41, 2016 
  16. Rajesh Kumar & Avinash Parashar, "Atomistic modelling of mechanical and thermal properties of BN nanofillers: a review",  Nanoscale.  pp. 22-49, Vol. 8, 2016
  17. Rajesh Kumar, Rajasekaran G & Avinash Parashar, "Optimised cut-off function for Tersoff like potentials for BN nanosheet: A molecular dynamics study", Nanotechnology. pp. 085706, Vol. 27, 2016 
  18. Rajasekaran G. & Avinash Parashar, "Molecular Dynamics Study on Mechanical Response and Failure Behaviour of Graphene: Performance Enhancement via 5-7-7-5 Defects", RSC Advances. pp. 26361-26373, Vol. 6, 2016 
  19. Muse Degefe & Avinash Parashar, "Effect of non-bonded interactions on failure morphology of defective graphene", Materials research express. pp. 045009, Vol. 4, 2016 
  20. Rajesh Kumar, Pierre Pertiny & Avinash Parashar, "Effects of Different Hydrogenation Regimes on Mechanical Properties of h-BN: A Reactive Force Field Study: A Reactive Force Field Study", The Journal of physical chemistry C. pp. 21932–21938, Vol. 120, 2016 
  21. Rajasekaran G. & Avinash Parashar, "Anisotropic compressive response of StoneThrower-Wales defects in graphene: A molecular dynamics study", Materials research express. pp. 095015, Vol.  9, 2016  
  22. A. Kushwaha & A. K. Das, "On Formation and Instabilities of a Liquid Bell", Multiphase Science and Technology. pp. 35-52, Vol. 18, 2016
  23. Ansari Mohd. Miqdad, S. Datta, A. K. Das & P. K. Das, "Effect of Electrostatic Incitation on Wetting Mode of a Nano-Drop over Pillar-Arrayed Surface" RSC Advances. pp. 110127-110133, Vol. 6, 2016
  24. B. K. Rana, A. K. Das & P. K. Das, "Numerical Study of Air Entrainment and Liquid Film Wrapping around a Rotating Cylinder" Industrial and Engineering Chemistry Research. pp. 11950-11960, Vol. 55, 2016
  25. B. K. Rana, A. K. Das & P. K. Das, "Asymmetric bursting of Taylor bubbles in inclined tube", Physics of Fluids. pp. 082106, Vol. 28, 2016
  26. C. Singh, A. K. Das & P. K. Das, "Flow restrictive and shear reducing effect of magnetization relaxation in ferrofluid cavity flow", Physics of Fluids. pp. 087103, Vol. 28, 2016
  27. C. Singh, A. K. Das & P. K. Das, "Single-mode instability of a ferrofluid-mercury interface under a nonuniform magnetic field", Physical Review E. pp. 012803, Vol. 94, 2016
  28. P. Kumar, A. K. Das & S. Mitra, "Physical understanding of gas-liquid annular flow and its transition to dispersed droplets", Physics of Fluids. pp. 072101, Vol. 28, 2016 
  29. S. Datta, M. Sharma & A. K. Das, “Unravelling Electrostatic Actuation on inclined and humped surfaces: Effect of Substrate Contact Angle”, Industrial Engineering and Chemistry Research. pp. 3949-3959, Vol. 55, 2016
  30. Y. Sharma, P. Kumar, B. K. Rana & A. K. Das, "Rotary Entrainment in stratified gasliquid layers: an experimental study", Proceedings of the Indian National Science Academy.  pp. 1-9, Vol. 82, 2016  
  31. S. Datta, A. K. Das & P. K. Das, “Wetting behaviour of a translating sessile nanodrop under electrostatic actuation”, RSC Advances. pp. 9796-9802, Vol. 6, 2016
  32. Chandan Pandey, Nitin Saini, Manas Mohan Mahapatra & Pradeep Kumar, “Hydrogen induced cold cracking of creep resistant ferritic P91 steel for different diffusible hydrogen levels in deposited metal”, International Journal of Hydrogen Energy.  pp. 17695-17712, Vol. 41, 2016  
  33. G Mandaloi, S Singh, Kumar, Pradeep & K Pal, "Effect on crystalline structure of AISI M2 steel using tungsten–thorium electrode through MRR, EWR, and surface finish", Measurement.  pp. 74-84, Vol. 90, 2016 
  34. Mohit Tyagi, Kumar, Pradeep & Dinesh Kumar, “Permutation of fuzzy AHP and AHP methods to prioritizing the alternatives of SCP system”, International Journal of Industrial Engineering: Theory, Applications and Practice. pp. 1943- 67, Vol. 22, 2016 
  35. Sumeet Gandhi, Mangla SK, Kumar Pradeep & Kumar D., "A Combined Approach Using AHP and DEMATEL for Evaluating Success Factors in Implementation of Green Supply Chain Management in Indian Manufacturing Industries", International Journal of Logistics Research and Applications. pp. 537-561, Vol. 19, 2016 
  36. Sachin Mangla, Kumar, Pradeep Barua & M. K , “An integrated methodology of FTA and fuzzy AHP for risk assessment in green supply chain”, International Journal of Operational Research. pp. 77-99, Vol. 25, 2016 
  37. Sachin Kumar Mangla, Kumar, Pradeep & Mukesh Kumar Barua, “A fuzzy DEMATEL Based Approach for Evaluation of Risks in Green Supply Chain", International Journal of Logistics Systems Management. pp. 224-243, Vol. 24, 2016 
  38. Ambrish Maurya & Pradeep Kumar Jha, “Study of fluid flow and solidification in billet caster continuous casting mold with electromagnetic stirring”, Archives of Metallurgy and Materials, (De-Gruyter), 2016 
  39. Deepak Khurana, Rajesh Choudhury & Sudhakar Subudhi, “Investigation of Thermal Conductivity and Viscosity of Al2O3/Water Nanofluids using Full Factorial Design and Utility Concept”, Nano. pp. 1650093-1-10, Vol. 11, 2016
  40. Rajesh Choudhury & Sudhakar Subudhi, “Aspect ratio dependence of turbulent natural convection in Al2O3/water nanofluids”, Applied Thermal Engineering. pp. 1095-1104, Vol. 108, 2016
  41. L Gangadhara Kiran Kumar, Shailesh Ranjan Kumar & Sudhakar Subudhi, “Experimental study of the turbulent free convection over horizontal smooth or grooved surfaces in an open cavity”, Heat and Mass Transfer. pp. 245-253, Vol. 52, 2016
  42. Kumar A, Erlicher S & Argoul P, "Phase difference in lateral synchronization of pedestrian floors using a modified hybrid Van der Pol/ Rayleigh oscillator", International Journal of Structural Stability and Dynamics. Vol. 16, 2016
  43. Sharma S.K. & Kumar A., "Impact of electric locomotive traction of the passenger vehicle ride quality in longitudinal train dynamics in the context of Indian railways", Mechanics & Industry. Vol. 18, 2016 
  44. Arora Punit, Gopta Suneel K., Bhasin V., Singh R.K., Sivaprasad S. & Tarafder S.,  "Testing and assessment of fatigue life prediction models for Indian PHWRs piping material under multi-axial load cycling", International Journal of Fatigue. pp. 98-113, Vol. 86, 2016 
  45. Chitranjan, Kumar Ravi, Gupta Akhilesh & Chatterjee Barun., "Determination of Rewetting Velocity during Jet Impingement Cooling of Hot Vertical Rod", Journal Thermal Analysis and Calorimetry, pp. 861–871, Vol. 123, 2016  
  46. Datta S., Das A.K. & Das P.K. "Wetting behaviour of a translating sessile nanodrop under electrostatic actuation", RSC Advances. pp. 9796-9802, Vol. 6, 2016 
      
  47. Muse Degefe & Parashar Avinash. "Effect of non-bonded interactions on failure morphology of defective graphene", Materials research express, pp. 045009, Vol. 4, 2016 
  48.  Jani, D.B. Mishra Manish, Sahoo P.K.,  "Performance Analysis of Hybrid Solid Desiccant Vapour Compression Air- Conditioning System in Hot and Humid Weather of India", Building Services Engineering Research and Technology (SAGE). pp. 1- 16, Vol. 0, 2016 
     
  49.  Jani, D.B. Mishra Manish, Sahoo P.K., "Performance Prediction of Rotary Solid Desiccant Dehumidifier in Hybrid Air-Conditioning System Using Artificial Neural Network", Applied Thermal Engineering. pp. 1091-1103, Vol. 98, 2016  
  50. Jani, D.B. Mishra Manish, Sahoo P.K., "Performance Prediction of Solid Desiccant - Vapor Compression Hybrid Air-Conditioning System Using Artificial Neural Network", Energy. pp. 618-629, Vol. 113, 2016  
  51. Jani, D.B. Mishra Manish, Sahoo P.K., "Solid Desiccant Air Conditioning - A State of the Art Review", Renewable & Sustainable Energy Reviews.  pp. 1451–1469, Vol. 60, 2016  
  52. Khatua A.K., Kumar P., Singh H.N. and Kumar R.,  "Measurement of enhanced heat transfer coefficient with perforated twisted tape inserts during condensation of R‑245fa", Heat and Mass Transfer. pp. 683-692, Vol. 52, 2016 
  53. Kumar Rajesh & Parashar Avinash., "Atomistic modelling of mechanical and thermal properties of BN nanofillers: a review", Nanoscale. pp. 22-49, Vol. 8, 2016  
  54.  Kumar Rajesh, Rajasekaran G. & Parashar Avinash., "Optimised cut-off function for Tersoff like potentials for BN nanosheet: A molecular dynamics study", Nanotechnology.  pp. 085706, Vol. 27, 2016 
  55. Mekonnen Gossaye, Kumar Sanjeev & Pathak P. M., "Wireless Hybrid Visual Servoing of Omnidirectional Wheeled Mobile Robots", Robotics and Autonomous Systems. pp. 450–462, Vol. 75, 2016  
  56. Mishra Shubham, Thangamani I. & Singh R.K., "Containment leakage characterization with BARCOM test results Singh for design and over pressure conditions", Nuclear Engg. & Design.  pp. 245-254, Vol. 301, 2016  
  57. Panchal Dilbagh & Kumar Dinesh, "Integrated framework for behaviour analysis and maintenance decision making in process plant", International journal of loss prevention in the process plant.  pp. 147-161, Vol. 40, 2016  
  58. Surya Kumar, Andallib Tariq, "Determination of thermal contact conductance of flat and curvilinear contacts by transient approach", Exp. Therm. and Fluid Sci, 2016
  59. Rai, A., & Upadhyay, S. H., "A review on signal processing techniques utilized in the fault diagnosis of rolling element bearings", Tribology International, Elsevier Publications. pp. 289-306, Vol. 96, 2016
  60. Rajasekaran G. & Parashar Avinash. "Effect of point and line defects on the properties of graphene", Critical reviews in solid state and materials sciences. pp. 46-70, Vol. 41, 2016 
     
  61. Rajasekaran G. & Parashar Avinash. "Molecular dynamics based simulations to study the effect of modified cut-off function for Tersoff potential on estimating mechanical properties of graphene", Material research express. pp. 035011, Vol.  3, 2016 
  62. Rajasekaran G. & Parashar Avinash. "Molecular Dynamics Study on Mechanical Response and Failure Behaviour of Graphene: Performance Enhancement via 5-7-7-5 Defects", RSC Advances. pp. 26361-26373, Vol. 6, 2016 
  63. Abhay Sharma, Dhanesh K. Verma & Navneet Arora, "A scheme of comprehensive assessment of weld bead geometry", International Journal of Advanced Manufacturing Technology. pp. 1507-1515, Vol. 82, 2016
  64. Singh Sanjay Kumar, Mishra Manish & Jha P. K.,  "Performance of Co-Current and Counter-Current Parallel Flow Three-Fluid Heat Exchanger Due to Perturbations in Flow", International Journal of Global Energy Issues (Inderscience).  pp. 144- 156, Vol. 39 , 2016  
     
  65. Sunny Zafar, and Apurbba Kumar Sharma. "Investigations on flexural performance and residual stresses in nanometric WC-12Co microwave clads", Surface and Coatings Technology. pp. 413-422, Vol. 291, 2016
  66. Radha Raman Mishra & Apurbba Kumar Sharma, “On melting characteristics of bulk Al-7039 alloy during in-situ microwave casting”, Applied Thermal Engineering. pp. 670–685, Vol. 111, 2016 
     
  67. Zafar Sunny & Sharma Apurbba Kumar, "Structure-property correlation in nanostructured WC–12Co microwave clad", Applied Surface Science, 2016 
  68. Manish Kumar Chauhan, Sushanta Dutta, B. K. Gandhi & Bhupendra Singh More, “Experimental Investigation of Flow over a Transversely Oscillating Square Cylinder at Intermediate Reynolds Number”, ASME Journal of Fluids Engineering. pp. 051105, Vol. 138, 2016
  69. N. Agrawal, S. Dutta and B.K. Gandhi, “Experimental investigation of flow field behind triangular prisms at intermediate Reynolds number with different apex angles”, Experimental Thermal and Fluid Science. pp. 97-111, Vol. 72, 2016
  70. B.K. Gandhi, H.K. Verma and Boby Abraham, “Mathematical Modeling and Simulation of Flow-Velocity Profile for Rectangular Open Channels”, ISH Journal of Hydraulic Research. pp. 193-203, Vol. 22, 2016
  71. Chirag Trivedi, Michel Cervantes and B. K. Gandhi, “Experimental and Numerical Investigations on a Francis Turbine during Runaway Operating Conditions”, Energies. pp. 1-22, Vol. 9, 2016
  72. S. Kumar, B. K. Gandhi and S.K. Mohapatra, “Leaching characteristics of Bottom Ash from Thermal Power Plants”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. pp. 686–694, Vol. 38, 2016
  73. Md. Shaukat Ali, A. Tariq and B. K. Gandhi, “Role of Chamfering angles and Flow through Slit on Heat Transfer Augmentation behind a Surface Mounted Rib”, ASME Journal of Heat Transfer. pp. 111901, Vol. 138, 2016
  74. Rahul Goyal, Chirag Trivedi, B. K. Gandhi, Michel Cervantes and Ole Dahlhaung, “Pressure measurements at part load operating condition of a high head model Francis turbine”, Sadhana. pp. 1311–1320, Vol. 41, 2016
  75. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Prediction of Rotary Solid Desiccant Dehumidifier in Hybrid Air-Conditioning System Using Artificial Neural Network", Applied Thermal Engineering. pp. 1091-1103, Vol. 98, 2016
  76. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Analysis of Hybrid Solid Desiccant Vapour Compression Air- Conditioning System in Hot and Humid Weather of India", Building Services Engineering Research and Technology (SAGE), pp. 523-538, Vol. 37, 2016
  77. D.B.Jani, Manish Mishra & P.K.Sahoo, "Solid Desiccant Air Conditioning - A State of the Art Review", Renewable & Sustainable Energy Reviews. pp. 1451–1469, Vol. 60, 2016
  78. D.B.Jani, Manish Mishra & P.K.Sahoo, "Performance Prediction of Solid Desiccant – Vapor Compression Hybrid Air-Conditioning System Using Artificial Neural Network", Energy. pp. 618-629, Vol. 113, 2016
  79. Sanjay Kumar Singh, Manish Mishra & P. K. Jha, "Performance of Co-Current and Counter-Current Parallel Flow Three-Fluid Heat Exchanger Due to Perturbations in Flow", International Journal of Global Energy Issues (Inderscience). pp. 144-156, Vol. 39, 2016
  80. D.B.Jani, Manish Mishra & P.K.Sahoo, "Experimental investigation on solid desiccant - vapor compression hybrid air- conditioning system in hot and humid weather", Applied Thermal Engineering. pp. 556-564, Vol. 104, 2016
  81. D.B.Jani, Manish Mishra & P.K.Sahoo, "Exergy Analysis of Solid Desiccant- Vapor Compression Hybrid Air Conditioning System", International Journal of Exergy (Inderscience). pp. 517-535, Vol. 20, 2016
  82. Sunny Zafar, and Apurbba Kumar Sharma, "Microstructure and wear performance of heat treated WC-12Co microwave clad", Vacuum. pp. 213-222, Vol. 131, 2016
  83. Mudimallana Goud, and Apurbba Kumar Sharma, "A three-dimensional finite element simulation approach to analyze material removal in electrochemical discharge machining", Journal of Mechanical Engineering Science. pp. 2417-2428, Vol. 231, 2016
  84. Sunny Zafar, and Apurbba Kumar Sharma, "Structure-property correlations in nanostructured WC–12Co microwave clad", Applied Surface Science. pp. 92-101, Vol. 370, 2016
  85. Mudimallana Goud, Apurbba Kumar Sharma, and Chandrashekhar Jawalkar, "A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate", Precision Engineering. pp. 1-17, Vol. 45, 2016
  86. Radha Raman Mishra, and Apurbba Kumar Sharma, "A review of research trends in microwave processing of metal-based materials and opportunities in microwave metal casting", Critical Reviews in Solid State and Materials Sciences. pp. 217-255, Vol. 41, 2016
  87. Manjot Singh Cheema, Pranay Kumar Singh, Oshin Tyagi, Akshay Dvivedi, and Apurbba Kumar Sharma, "Tool wear and form accuracy in ultrasonically machined microchannels", Measurement. pp. 85-94, Vol. 81, 2016
  88. Sunny Zafar, and Apurbba Kumar Sharma, "Abrasive and erosive wear behaviour of nanometric WC–12Co microwave clads", Wear. pp. 29-45, Vol. 346, 2016
  89. Radha Raman Mishra, and Apurbba Kumar Sharma, "Microwave–material interaction phenomena: heating mechanisms, challenges and opportunities in material processing", Composites Part A: Applied Science and Manufacturing. pp. 78-97, Vol. 81, 2016  
  90. B. K. Rana, A. K. Das, P. K. Das, "Collapse of a Taylor bubble at free surface", Multiphase Science and Technology. pp. 173-191, Vol. 28, 2016
  91. M. Ahmadlouydarab, C. Lan, A. K. Das, Y. Ma, "Coalescence of sessile microdroplets subject to a wettability gradient on a solid surface" Physical Review E. pp. 033112-1-12, Vol. 94, 2016
  92. Y. Sharma, P. Kumar, B. K. Rana, A. K. Das, "Rotary Entrainment in stratified gas-liquid layers: an experimental study", Proceedings of the Indian National Science Academy. pp. 1-9, Vol. 82, 2016 
  93. Rajasekaran G., Avinash Parashar, "Anisotropic compressive response of Stone-Thrower-Wales defects in graphene: A molecular dynamics study", Materials research express. pp. 095015, Vol. 9, 2016  
  94. Deepak Bhandari, Rahul Chhibber, Navneet Arora & Rajeev Mehta, "Investigation of TiO2-SiO2-CaO-CaF2 based electrode coatings on weld metal chemistry and mechanical behaviour of bimetallic welds", Journal of Manufacturing Processes. pp. 61-74, Vol. 23, 2016
  95. Khyati Tamta, Umesh Wankhede & D.B. Karunakar, "Investigations on modification of binder system in investment casting", International Journal of Research in Engineering and Technology. pp. 122-124, Vol. 5, 2016
  96. D.B. Karunakar & Khyati Tamta, "Enhancing the porosity and properties of the ceramic shell in investment casting process", Indian Foundry Journal. pp. 28-31, Vol. 62, 2016
  97. Anil Kumar Birru & D.B. Karunakar, “Effects of grain refinement and residual elements on hot tearing of A713 aluminium cast alloy”, Transactions of Nonferrous Metals Society of China. pp. 1783−1790, Vol. 26, 2016
  98. J. P. Misra, P. K. Jain, D. K. Dwivedi & S. Verma, "Empirical Modelling of Surface Quality in Electrochemical-Mechanical Finishing of Bevel Gears", International J. of Machining and Machinability. pp. 350-364, Vol. 18,2016
  99. Shivraman Thapliyal & Dheerendra Kumar Dwivedi, "Study of the effect of friction stir processing of the sliding wear behavior of Cast NiAl Bronze: A statistical analysis", Tribology Internatonal. pp. 124-135, Vol. 97, 2016
  100. Ravi Shankar & Dheerendra Kumar Dwivedi, "Activating flux tungsten inert gas welding for enhanced weld penetration", Journal of Manufacturing Processes. pp. 211-228, Vol. 22, 2016
  101. Shivraman T & Dheerendra Kumar Dwivedi, "Microstructure evolution and tribological behavior of the solid lubricant based surface composite of cast Nickel Aluminum Bronze developed by friction stir processing", Journal of Materials Processing Technology. pp. 30-38, Vol. 238, 2016
  102. Panchal Mitesh B & Upadhyay S H, "Effect of chirality and point defects on resonant behavior of single walled boron nitride nanotube based mass sensor", Journal Nanoengineering and Nanosystems. pp. 85–95, Vol. 229, 2016
  103. Patel Utkarsh. A. & Upadhyay S.H. “An Analytical Model (7d.o.f) for the Prediction of the Vibration Response of Cylindrical Roller Element Bearings Due to a Combined Localized Defect", Journal Multi-body Dynamics. pp. 383-406, Vol. 229, 2016  
  104. Patel Utkarsh. A. & Upadhyay S.H. “Nonlinear Dynamic response of Cylindrical Roller Bearing rotor system with 9 D.O.F model having a Combined Localized Defect at inner outer race of bearing”, Tribology Transactions 2017. pp. 284–299, Vol. 60, 2016
  105. Joshi, Preeti, & Upadhyay, S. H., “Analysis of alignment effect on carbon nanotube layer in nanocomposites”, Physica E: Low-dimensional Systems and Nanostructures, Elsevier Publishers. pp. 221–22, Vol. 66, 2016
  106. Panchal Mitesh B & Upadhyay S H, "Boron nitride nanotube based mass sensing of zeptogram scale", Spectroscopy Letters: An International Journal for Rapid Communication, Taylor & Francis. pp. 17-21, Vol. 48, 2016
  107. S. Ganpule, R. Salzar, B. Perry, N. Chandra “Role of Helmets in Blast Mitigation: Insights from Experiments on Post-Mortem Human Surrogate," International Journal of Experimental and Computational Biomechanics, 4(1):13-31, 2016.
# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.