Publication-Conferences2017 - Department of Mechanical and Industrial Engineering,Indian Institute of Technology Roorkee
Publication-Conferences2017

2017

  1. Deepak Khurana, Sudhakar Subudhi, "Long term forced convection heat transfer analysis of nanofluids", IHMTC-2017 Conference, Hyderabad, 2017 
  2. Deepak Khurana, Sudhakar Subudhi, "Investigation of heat transfer enhancement/deterioration with nanofluids", IHMTC-2017 Conference, Hyderabad, 2017
  3. Pradeep Kumar Jha and Ambrish Maurya, “Study of mold level fluctuation with electromagnetic stirring in continuous casting mold”. International Conference on “Processing and Fabrication of Advanced Materials XXV”, Department of Mechanical Engineering, Faculty of Engineering, The University of Auckland, Auckland, New Zealand, 2017
  4. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Experimental analysis of thermal fatigue in bimetallic welds", Materials Science Forum, 2017  
  5. Yogesh Kumar Singla, D.K. Dwivedi, Navneet Arora, ‘Modeling the impact-sliding wear characteristics of rare earth additive iron-based hardfacing alloys’, Journal of Engineering Tribology, 2017 
  6. Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta, "Investigations on design and formulation of buttering layer electrode coatings for bimetallic welds", Materials Science Forum, 2017 
  7. Lalit Thakur, Navneet Arora, "A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating", Surface and Coatings Technology, 2017 
  8. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Analysis of mechanical behaviour of heat affected zone on ferritic side of bimetallic welds under thermal fatigue conditions", Materials Science Forum, 2017 
  9. Naveen Kumar, Navneet Arora, S.K. Goel, D.B. Goel, "A comparative study of microstructure and mechanical properties of 21-4-N steel weld joints using different filler materials", International Conference on Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2017), IIT Roorkee, 2017
  10. Deepak Khurana, Sudhakar Subudhi, "Long term forced convection heat transfer analysis of nanofluids", IHMTC-2017 Conference, Hyderabad, 2017
  11. Deepak Khurana, Sudhakar Subudhi, "Investigation of heat transfer enhancement/deterioration with nanofluid"s, IHMTC-2017 Conference, Hyderabad, 2017
  12. Pradeep Kumar Jha and Ambrish Maurya, “Study of mold level fluctuation with electromagnetic stirring in continuous casting mold”. International Conference on “Processing and Fabrication of Advanced Materials XXV”, Department of Mechanical Engineering, Faculty of Engineering, The University of Auckland, Auckland, New Zealand, 2017
  13. Yadav V K, Kumar, P and Dvivedi A, “Investigations on rotary tool near-dry electric discharge machining,” The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, 2017 
  14. Kumar S., Dvivedi A. and Kumar P. , "On tool wear in rotary tool micro-ultrasonic machining,” The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, 2017  
  15. Sreehari, D., and Apurbba Kumar Sharma, "Simulation studies of different Simicrochannels for heat transfer applications", Proceedings of International Conference on Manufacturing Technology and Simulation, IIT Madras, 2017 
  16. P. Blankenhagel, K. B. Mishra, K.-D. Wehrstedt, J. Steinbach, "Fireballs as a possible hazard scenario of organic peroxides in steel drums", 5th Magdeburg Fire and Explosion Days, Magdeburg, Germany, 2017
  17. K. B. Mishra, K.-D. Wehrstedt, H. Krebs, "Prediction of overpressure in underground gas pipeline explosions", 5th Magdeburg Fire and Explosion Days, Magdeburg, Germany, 2017
  18. A. Sharma, K.B. Mishra, P. Blankenhagel, "LES of Large Ethanol Pool Fires", European Combustion Meeting, Dubrovnik, Croatia, 2017 
  19. P. Blankenhagel, K.B. Mishra, K.-D. Wehrstedt, J. Steinbach, "Prediction of Organic Peroxide Fireball Characteristics Using CFD Simulation", European Combustion Meeting, Dubrovnik, Croatia, 2017 
  20. A. Sharma, K.B. Mishra, "High Rise Building Fires: Effective Smoke Extraction & Optimum Fan location", 12th IAFSS Symposium, Lund, Sweeden, 2017 
  21. A, Dasgotra, GVV Varun Teja, K, B. Mishra, "3D physics-based modelling of largescale flammable cloud dispersion using FLACS", International Conference on Safety, IIT Gandhinagar, India, 2017 
  22. Inderjeet Singh, Manarshhjot Singh, Pushparaj Mani Pathak and Rochdi Merzouki, "Optimal Work Space of Parallel Continuum Manipulator Consisting of Compact Bionic Handling Arms", The 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017, Macau SAR, China, 2017 
  23. Inderjeet Singh, Othman lakhal, Yacine Amara, Vincent Coelen, Pushparaj Mani Pathak and Rochdi Merzouki, "Performances Evaluation of Inverse Kinematic Models of a Compact Bionic Handling Assistant", The 2017 IEEE International Conference on Robotics and Biomimetics, ROBIO 2017, Macau SAR, China, 2017  
  24. Matías Nacusse, Martín Crespo, Sergio Junco, Vitalram Rayankula, Pushparaj Mani Pathak, "Bond Graph Model Conditioning For Analysis", Simulation And Control System Design: Application To A Planar Mobile Robotic Manipulator, IMAACA, 2017 
  25. Mulu Girmay, Inderjeet Singh, Pushparaj Mani Pathak, A.K. Samantaray, Rochdi Merzouki, and Belkacem Ould Bouamama, "Dynamic Modelling of Cooperative Planar Bionic Manipulator", 3rd international and 18th National Conference on Machines and Mechanisms iNaCoMM2017, 2017 
  26. Tarikayehu Amanuel, Manish Mishra, "Numerical Investigation of Triple Concentric Tube Heat Exchanger Using Al2O3-Water Nanofluids", 24th National Heat and Mass Transfer Conference and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, BITS-Pilani, Hyderabad Campus, India, 2017 
  27. Rohit Kumar, Manish Mishra, P.K.Sahoo, Onkar Gokhale, D. Mukhopadhyay, "CFD Analysis of Post-Blow Down Thermal Behavior of a 19-Pin Fuel Bundle", 24th National Heat and Mass Transfer Conference and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, BITS-Pilani, Hyderabad Campus, India, 2017  
  28. Naveen Sharma, Andallib Tariq, Manish Mishra, "Experimental Study of Aerothermal Performance in Rectangular Duct with Trapezium Ribs", 24th National Heat and Mass Transfer Conference and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, BITS-Pilani, Hyderabad Campus, India, 2017 
  29. Harpreet Kaur Aasi, Manish Mishra, "Transient Performance of Three Fluid Crossflow Heat Exchanger with Temperature Nonuniformity", 44rd National Conference on Fluid Mechanics and Fluid Power, Amrita University, Kollam, India, 2017 
  30. Harpreet Kaur Aasi, Manish Mishra, "Effect of Flow Perturbation on Transient behaviour of Three Fluid Crossflow Heat Exchanger", 44rd National Conference on Fluid Mechanics and Fluid Power, Amrita University, Kollam, India, 2017 
  31. Naveen Sharma, Andallib Tariq, Manish Mishra, "Experimental Study of Detailed Heat Transfer and Fluid Flow Characteristics in a Rectangular Duct with Solid and Slitted Pentagonal Ribs", The 5th ASME Gas Turbine India Conference, Bangalore, India, 2017  
  32. Ankita Maity and K. M. Singh. "Evaluation of scheduled relaxation Jacobi method as solver and preconditioner for numerical solution of pressure Poisson equation", Proc. of 44th National Conference on Fluid Mechanics and Fluid Power, Amrita University, Amritapuri Campus, Kollam, Kerala, 2017
  33. Gaurav Kumar and Apurbba Kumar Sharma, "Defect Minimization in Microwave Drilling of Glass Using Dielectrics", Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), IIT Madras, 2017
  34. Mishra, R. R. & Apurbba Kumar Sharma, "Thermal analysis of in-situ microwave casting for efficient processing", Proceeding of International conference on Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2017), Roorkee, 2017 
  35. Mishra, R. R., and Apurbba Kumar Sharma. "Experimental investigation on in-situ microwave casting of copper", Proceeding of International conference on recent advances in Materials and Manufacturing Technologies (IMMT 2017), at BITS Pilani, Dubai Campus, 2017  
  36. Mishra, R. R., & Apurbba Kumar Sharma, "Influence of processing power on micro-indentation properties of in-situ microwave casts of 7039 aluminum alloy developed at 2.45 GHz", Proceeding of International Conference of Nanotechnology: Ideas, Innovations and Initiatives (ICN: 3I 2017), Roorkee, 2017 
  37. Yadav J., Mishra, R. R., & Apurbba Kumar Sharma, "Processing of Magnesium Matrix Composites for Aerospace Applications using Microwave Energy", Proceeding of International Conference of Nanotechnology: Ideas, Innovations and Initiatives (ICN: 3I 2017), Roorkee, 2017
  38. Sreehari, D., and Apurbba Kumar Sharma, "Simulation studies of different Simicrochannels for heat transfer applications", Proceedings of International Conference on Manufacturing Technology and Simulation, Madras, 2017
  39. Dungali Sreehari & Apurbba Kumar Sharma, "On Dimensional Accuracy in Silicon Microchannels Fabricated Using Micro-USM", Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), Chennai, 2017
  40. Bhupendra K. Gandhi and Sandeep Kumar, “Hydraulic Efficiency Measurement of Two Small Hydro Power Plants in India using Thermodynamic Method”, Proceedings of the International Symposium on Current Research in Hydraulic Turbines CRHT – VII, Turbine Testing Lab, Kathmandu University, Dhulikhel, Nepal, 2017
  41. Rahul Goyal, B. K. Gandhi and Michel Cervantes, “A Posteriori Uncertainty Quantification of PIV Measurements for Francis Turbine”, Proceedings 44th National Conference on Fluid Mechanics and Fluid Power, Amrita University, Amritapuri Campus, Kollam, Kerala, India, 2017
  42. Subodh Khullar, B. K Gandhi and Rahul Tarodiya, “Numerical Modelling of the Centrifugal Slurry Pump Handling Bottom Ash Slurry”,Proceedings 44th National Conference on Fluid Mechanics and Fluid Power, Amrita University, Amritapuri Campus, Kollam, Kerala, India, 2017
  43. B. K Gandhi and Sandeep Kumar, “Temperature Measurement for Hydraulic Efficiency Evaluation by Thermodynamic Method and Uncertainty Analysis”,Proceedings 44th National Conference on Fluid Mechanics and Fluid Power, Amrita University, Amritapuri Campus, Kollam, Kerala, India, 2017
  44. A.K. Sharma, D.M. Joglekar, and M.M. Joglekar, "Finite element analysis of inhomogeneously deforming dielectric elastomer actuators", In: Proceedings of ISSS International Conference on Smart Materials Structures and Systems, IISc Bengaluru, 2017
  45. A.K. Sharma, D.M. Joglekar, and M.M. Joglekar, "Finite element analysis of dielectric elastomer actuators with unequal biaxial prestress", In: Proceedings of ISSS International Conference on Smart Materials Structures and Systems, IISc Bengaluru, 2017
  46. P. Kumar, Y. Agrawal, and M.M. Joglekar, "Experimental analysis and parameter extraction of viscoelastic dielectric elastomer actuators", In: Proceedings of ISSS International Conference on Smart Materials Structures and Systems, IISc Bengaluru, 2017
  47. R.K. Godara and M.M. Joglekar,"Aa novel capacitive mass sensor using an open-loop controlled microcantilever", In: Proceedings of ISSS International Conference on Smart Materials Structures and Systems, IISc Bengaluru, 2017 
  48. R.K. Godara, P. Singal, and M.M. Joglekar, "Retractability of an electrically driven initially curved microbeam", In: Proceedings of ISSS International Conference on Smart Materials Structures and Systems, IISc Bengaluru, 2017 
  49. Manish Kumar, I.V. Singh, B.K. Mishra, S. Ahmad, A. Venugopal Rao, Vikas Kumar, "Fatigue Life Evaluation under Spectrum Loading using XFEM", International Conference on Recent Advances in Material and Manufacturing Technologies (IMMT-2017), BITS Dubai Campus, Dubai, 2017
  50. S. S. Samant, I. V. Singh and R. N. Singh, "Effect of Tempering Temperature on Mechanical Properties of P91 Steel", Proceeding of Third Indian Conference on Applied Mechanics (INCAM), pp. 151–152, MNNIT Allahabad, India, 2017  
  51. R. U. Patil, B. K. Mishra, I. V. Singh, "Failure Analysis of Laminated Composite Using FE-based Phase Field Method", Proceeding of Third Indian Conference on Applied Mechanics (INCAM), MNNIT Allahbad, India, 2017  
  52. S.K Singh, I.V. Singh, B.K. Mishra and G. Bhardwaj, "Fatigue Crack Growth Simulations of FGMs by Bézier Extraction based T-spline XIGA", Proceeding of Third Indian National Conference on Applied Mechanics (INCAM-2017), MNNIT Allahabad, India, 201
  53. Kamal Raj Sharma, Sushanta Dutta, “Flow Control over a Flexible Splitter Plate Attached Square Cylinder at an Intermediate Reynolds Number “44th National Conference on Fluid Mechanics and Fluid Power (FMFP), Amrita University, Kollam, Kerela, 2017
  54. Kamal Raj Sharma, Sushanta Dutta, “Effect of Rigid and Flexible Splitter Plate Attached to Square Cylinder on Strouhal Number at Moderate Reynolds Number”, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), BITS PILANI, Hyderabad, 2017
  55. J. Kumar, U.K. Komal, K. Gashu and I. Singh, “Joining Behavior of Polymer Matrix Composites”, International Conference on Research and Innovations in Mechanical Engineering (ICRIME-2017), GNE Ludhiana, India, 2017
  56. U.K. Komal, V. Verma, T. Ashwani, N. Verma and I. Singh, “Effect of Chemical Treatment on Mechanical Behavior of Banana Fiber Reinforced Polymer Composites”, Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2017), IIT Roorkee, India, 2017
  57. H. Sharma, U.K. Komal, I. Singh and D. Kumar, “Artificial Intelligence Based Tool for Predicting of Damage During Drilling of FRPs”, Twenty First International Conference on Composite Materials (ICCM 21), Xi’an, China, 2017 
  58. M.K. Lila, B. Singh. B.S Pabla and I. Singh, “Effect of Environmental Conditioning on Natural Fiber Reinforced Epoxy Composites”, Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2017), IIT Roorkee, Uttarakhand, 2017
  59. R. Kumar, I. Singh and T. S. Srivatsan. “Use of Micro Electric Discharge Drilling to Achieve Improvement in Performance: A Design Approach”. International Conference on Processing and Fabrication of Advanced Materials. Chonbuk National University. South Korea, 2017
  60. R. Kumar and I. Singh, “Design of Electrode for Assisting Removal of Debris during Micro Electric Discharge Drilling in Ti6Al4V”, 3rd International Conference on Mechanical Engineering and Automation Science (ICMEAS 2017). University of Birmingham, United Kingdom, 2017
  61.  Deepak Khurana, Sudhakar Subudhi, "Long term forced convection heat transfer analysis of nanofluids", IHMTC-2017 Conference, Hyderabad, 2017
  62.  Deepak Khurana, Sudhakar Subudhi, "Investigation of heat transfer enhancement/deterioration with nanofluids", IHMTC-2017 Conference, Hyderabad, 2017
  63. Pradeep Kumar Jha and Ambrish Maurya, “Study of mold level fluctuation with electromagnetic stirring in continuous casting mold”. International Conference on “Processing and Fabrication of Advanced Materials XXV”, Department of Mechanical Engineering, Faculty of Engineering, The University of Auckland, Auckland, New Zealand, 2017
  64. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Experimental analysis of thermal fatigue in bimetallic welds", Materials Science Forum, 201
  65. Yogesh Kumar Singla, D.K. Dwivedi, Navneet Arora, "Modeling the impact-sliding wear characteristics of rare earth additive iron-based hardfacing alloys", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Trib017 
  66.  Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta, "Investigations on design and formulation of buttering layer electrode coatings for bimetallic welds", Materials Science Forum, 2017
  67. Lalit Thakur, Navneet Arora, "A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating", Surface and Coatings Technology, 2017
  68. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Analysis of mechanical behaviour of heat affected zone on ferritic side of bimetallic welds under thermal fatigue conditions", Materials Science Forum, 2017 
  69. Deepak Khurana, Sudhakar Subudhi, "Long term forced convection heat transfer analysis of nanofluids", IHMTC-2017 Conference, Hyderabad, 2017 
  70.  Deepak Khurana, Sudhakar Subudhi, "Investigation of heat transfer enhancement/deterioration with nanofluids", IHMTC-2017 Conference, Hyderabad, 2017
  71. Pradeep Kumar Jha and Ambrish Maurya, “Study of mold level fluctuation with electromagnetic stirring in continuous casting mold”. International Conference on “Processing and Fabrication of Advanced Materials XXV”, Department of Mechanical Engineering, Faculty of Engineering, The University of Auckland, Auckland, New Zealand, 2017
  72. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Experimental analysis of thermal fatigue in bimetallic welds", Materials Science Forum, 2017 
  73. Yogesh Kumar Singla, D.K. Dwivedi, Navneet Arora, "Modeling the impact-sliding wear characteristics of rare earth additive iron-based hardfacing alloys", Journal of Engineering Tribology, 2017 
  74. Deepak Bhandari, Rahul Chhibber, Navneet Arora, Rajeev Mehta, "Investigations on design and formulation of buttering layer electrode coatings for bimetallic welds", Materials Science Forum, 2017 
  75. Lalit Thakur, Navneet Arora, "A study of processing and slurry erosion behaviour of multi-walled carbon nanotubes modified HVOF sprayed nano-WC-10Co-4Cr coating", Surface and Coatings Technology, 2017 
  76. Hamender Kumar Aggarwal, Rahul Chhibber, Navneet Arora and Rajeev Mehta, "Analysis of mechanical behaviour of heat affected zone on ferritic side of bimetallic welds under thermal fatigue conditions", Materials Science Forum, 2017 
  77. Yadav V K, Kumar, P and Dvivedi A, “Investigations on rotary tool near-dry electric discharge machining,” The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, 2017 
  78. Kumar S., Dvivedi A. and Kumar P. , "On tool wear in rotary tool micro-ultrasonic machining,” The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, 2017 
  79. Sreehari, D., and Apurbba Kumar Sharma, "Simulation studies of different Si-microchannels for heat transfer applications", Proceedings of International Conference on Manufacturing Technology and Simulation, Madras, 2017
  80. P. Blankenhagel, K. B. Mishra, K.-D. Wehrstedt, J. Steinbach, "Fireballs as a possible hazard scenario of organic peroxides in steel drums", 5th Magdeburg Fire and Explosion Days, Magdeburg, Germany, 2017  
  81.  K. B. Mishra, K.-D. Wehrstedt, H. Krebs, "Prediction of overpressure in underground gas pipeline explosions", 5th Magdeburg Fire and Explosion Days, Magdeburg, Germany, 2017  
  82. A. Sharma, K.B. Mishra, P. Blankenhagel, "LES of Large Ethanol Pool Fires", European Combustion Meeting, Dubrovnik, Croatia, 2017 
  83. P. Blankenhagel, K.B. Mishra, K.-D. Wehrstedt, J. Steinbach, "Prediction of Organic Peroxide Fireball Characteristics Using CFD Simulation", European Combustion Meeting, Dubrovnik, Croatia, 2017 
  84. A. Sharma, K.B. Mishra, "High Rise Building Fires: Effective Smoke Extraction & Optimum Fan location", 12th IAFSS Symposium, Lund, Sweeden, 2017
  85. A, Dasgotra, GVV Varun Teja, K, B. Mishra, "3D physics-based modelling of largescale flammable cloud dispersion using FLACS", International Conference on Safety, IIT Gandhinagar, India, 2017
  86. Kumar, S., & Upadhyay, S. H., “Analysis of Real Time Adaptive Control Mechanism for Space Antenna Reflector”, 19th International Conference on Human-Robot Interaction (ICHRI-2017), Dubai, UAE, 2017
  87. P Tiwari, & Upadhyay S H., “Application of K-Means clustering and the cosine distance measure for performance assessment of rolling element bearings”, National Symposium on Rotor-dynamics, IIT Patna, 2017
  88. Tinku Kumar, Navneet Arora, D.V. Kiran, "Probing the influence of welding current and filler wire feed rate on aluminum and steel joint quality", International Conference on Advances in Materials & Processing: Challenges & Opportunities (AMPCO 2017), IIT Roorkee, 2017
  89. Geleta Fekadu & Sudhakar Subudhi, "Liquid Desiccant Dehumidification Using Solar Regenerated System", 6th International Conference on Advances in Energy Research 2017 (ICAER 2017), IIT Bombay, Mumbai, India, 2017
  90. Pankaj Tiwary, Geleta Fekadu & Sudhakar Subudhi, "Study of performance of solar flat plate collector using Al2O3/water nanofluids", 6th International Conference on Advances in Energy Research 2017 (ICAER 2017), IIT Bombay, Mumbai, India, 2017
  91. Aditya Kumar, Sudhakar Subudhi, "Temperature Dependent Thermal Conductivity of Low Particle Concentration Magnetite Nanofluids with Zero Additives", 44th National Conference on Fluid Mechanics and Fluid Power (FMFP-2017), Amrita University, Amritapuri Campus, Kollam, Kerala, India, 2017
  92. Sudhakar Subudhi, "Rayleigh-Benard convection in nanofluids", Summer school and Discussion Meeting on Buoyancy driven flows, ICTS-TIFR, Bangalore, India, 2017
  93. Sreehari, D., and Apurbba Kumar Sharma, "Influence of process parameters on surface roughness in 3D silicon microchannels fabricated by micro-USM", Proceedings of International Conference on Design and Manufacturing, 2016, Kancheepuram, 2017
  94. S. Cheneke &  D.B. Karunakar, “Experiment on rheocasting of the as cast 2219 Al alloy”, International Conference on Advances in Materials & Processing: Challenges & Opportunities, AMPCO, IIT Roorkee, 2017
  95. S. Cheneke &  D.B. Karunakar, "Investigation of microstructure and mechanical properties of semi-solid cast 2219 aluminum alloy", Advances in Materials & Processing: Challenges & Opportunities(AMPCO-2017), IIT Roorkee, India, 2017
  96. K.L. Meena & D.B. Karunakar, “Development of alumina toughened zirconia nanocomposites using spark plasma sintering”, International conference on advances in materials and processing: challenges and opportunities (AMPCO-2017),IIT Roorkee, India, 2017
  97. Ch. Suresh Vidyasagar & D.B. Karunakar, "Development of 2024 AA-Yttrium composites by spark plasma sintering", At International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2017), Dubai, UAE, 2017
# # # # # | # # #
Credits : Information Management Group, IIT Roorkee
Copyright © , All Rights Reserved, Institute Computer Centre, IIT Roorkee.