Spotlight
Student Homepages
Faculty Profiles
About Us
Labs
S.P. Harsha
S. P. Harsha Associate Professor surajfme[at]iitr.ac.in 91-1332-285891
Areas of Interest
  • Vibrations & Control, Machine & Human Vibration, CNT Based Nano-resonators, Fault Diagnosis/Prognosis of Bearings
Refereed Journal Papers

(2003)

  1. Harsha, S. P., Sandeep K. and Prakash R, (2003) “The Effect of Speed of Balanced Rotor on Nonlinear Vibrations Associated With Ball Bearings.” International Journal of Mechanical Sciences, Vol. 45, No. 4, pp 725 – 740. Elsevier publishers (Impact Factor 1.288) (Citation: 120)
  2. Harsha, S. P., Sandeep K. and Prakash R, (2003) “Effects of Preload and Number of Balls on Nonlinear Dynamic Behavior of Ball Bearing System.” International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 4, No. 3, pp. 265 – 279. (Impact Factor 5.099)(Citation: 16)
  3. Harsha, S. P., Sandeep K. and Prakash R, (2003) “Quasi-periodic, Sub-harmonic and Chaotic Motions of a Rotor Bearing System.” International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 4, No. 4, pp. 361 – 372. (Impact Factor 5.099)(Citation: 5)
  4. Harsha, S. P., Sandeep K. and Prakash R, (2003) “Nonlinear Dynamic Behaviors of High Speed Rotor Supported By Rolling Element Bearings.” International Journal of Applied Mechanics and Engineering, Vol. 8, No. 4, pp. 705 – 720.

(2004)

  1. Harsha, S. P., Sandeep K. and Prakash R, (2004) “Nonlinear Dynamic Behaviors of Rolling Element Bearings Due to Surface Waviness.” Journal of Sound and Vibration, Vol. 272, No. 3-5, pp. 557 – 580. Elsevier publishers (Impact Factor 1.414) (Citation: 129)
  2. Harsha, S. P., Sandeep K. and Prakash R, (2004) “Nonlinear Dynamic Response of a Rotor Bearing System Due to Surface Waviness.” Nonlinear Dynamics, An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems, Vol. 37, pp. 91 – 114. Springer publisher(Impact Factor 1.658) (Citation:5)
  3. Harsha, S. P., Kankar P. K. (2004) “Stability Analysis of Rotor Bearing System Due to Surface Waviness and Number of Balls.” International Journal of Mechanical Sciences, Vol. 46, No. 7, pp. 1055 – 1079. Elsevier publishers(Impact Factor 1.288) (Citation: 72)
  4. Harsha, S. P., (2004) “The Effect of Ball Size Variations on Nonlinear Vibration Associated with Ball Bearings.” IMECHE, Journal of Multi Body Dynamics (Part-K), Vol. 218, No. 4, pp. 191-210. (Impact Factor 0.35) (Citation: 03)

(2005)

  1. Harsha, S. P., (2005) “Nonlinear Dynamic Response of a Balanced Rotor Supported on Rolling Element Bearing.” Mechanical Systems and Signal Processing, Vol. 19, No. 3, pp. 551 – 578. Elsevier publishers(Impact Factor 2.075) (Citation: 32)
  2. Harsha, S. P., Kankar P. K. (2005) “Nonlinear Dynamic Analysis of a Complex Rotor Bearing System.” International Journal of Acoustics and Vibration, Vol. 10, No. 1, pp. 33 – 39. (Impact Factor 0.291)
  3. Harsha, S. P., (2005) “Nonlinear Dynamic Response of an Unbalanced Rotor Supported on Roller Bearing.” Chaos, Solitons and Fractals,The interdisciplinary journal of Nonlinear Science, and Non-equilibrium and Complex Phenomena, Vol. 26, No. 1, pp. 47 – 66. Elsevier publishers(Impact Factor 3.1) (Citation: 25).
  4. Harsha, S. P., Kankar P. K. and Purohit R. K., (2005) “Nonlinear Dynamic Analysis of High Speed Rolling Element Bearings Due to Cage Run-out.” Computer Assisted Mechanics and Engineering Sciences, Vol. 12, No. 1, pp. 1-15.

(2006)

  1. Harsha, S. P. and Nataraj C., (2006) “Nonlinear Dynamic Analysis of an Unbalanced Rotor Supported by High-Speed Rolling Element Bearings with Effect of Surface Waviness.” International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 7, No. 2, pp. 5-9. (Impact Factor 5.099)
  2. Harsha, S. P. and Nataraj C. (2006) “Nonlinear Dynamic Analysis of a Rotor Bearing System Due to Distributed Defects Using Factorial Design of Experiments.” International Journal of Applied Mechanics and Engineering, Vol. 12, pp.  1- 12.
  3. Harsha, S. P., Kankar P. K. and Nataraj C. (2006) “Nonlinear Vibrations Signatures of a Rotor Bearing System Due to the Effect Ball Waviness.” International Journal of Acoustics and Vibration, Vol. 11, No. 2, pp. 9-18. (Impact Factor 0.291)
  4. Harsha, S. P., (2006) “Nonlinear Dynamic Analysis of Rolling Element Bearings Due to Cage Run-out and Number of Balls.” Journal of Sound and Vibration, Vol. 289, pp. 360-381. Elsevier publishers(Impact Factor 1.414) (Citation: 4)
  5. Harsha, S. P., (2006) “Nonlinear Dynamic Analysis of High-Speed Rotor Supported by Rolling Bearing Vibrations.” Journal of Sound and Vibration, Vol. 290, pp. 65-100. Elsevier publishers (Impact Factor 1.414) (Citation: 15)
  6. Harsha, S. P., (2006) “Roller Bearing Vibrations – The Effect of Surface Waviness and Radial Internal Clearance.” International Journal of Computational Methods in Engineering Science and Mechanics, Vol. 7, No. 2, pp. 91-111.Taylor & Francis publication.
  7. Harsha, S. P., (2006) “Nonlinear Dynamic Analysis of a Balanced Rotor Supported on Rolling Element Bearings Due to Clearance Effect.” Mechanism and Machines Theory, Vol. 41, No. 6, pp. 688-706. Elsevier publishers(Impact Factor 1.099) (Citation: 14)

(2007)

  1. Harsha, S. P.,and Nataraj C. (2007) “Intermittent Chaotic Behavior of Unmanned Surface Vehicles (USV) due the Rudder Frequencies and amplitudes.” Transaction of Nonlinear Science and Complexity (NSC), Vol. 4, pp 135 - 142, World Scientific publication, USA
  2. C. Nataraj and Harsha, S. P.,(2007) “Nonlinear Vibration Analysis of an Unbalanced Rotor on Rolling Element Bearing Due to Cage Run-out.” Transaction of Nonlinear Science and Complexity (NSC), Vol. 2, pp 213-221, World Scientific publication, USA.

(2008)

  1. C. Nataraj and Harsha, S. P.,(2008) “The Effect of Bearing Cage Run-out on Nonlinear Dynamics of Rotating Shaft.” Communications in Nonlinear Science and Numerical Simulation, Vol. 13, pp. 822 - 838. Elsevier publishers (Citation: 30) (Impact Factor: 2.569)
  2. Upadhyay S.H., Jain S.C and Harsha, S. P.,(2008)“Nonlinear Vibration Signature Analysis of High Speed Rotor Due to Defects of Rolling Element” Advances in Theoretical and Applied MechanicsVol. 1 (7), pp 301-314. (Citation: 1)

(2009)

  1. Kankar P.K., Harsha, S. P.,Kumar Pradeep and Sharma Satish C., “Fault Diagnosis of a Rotor Bearing System using Response Surface Method”, European Journal of Mechanics / A Solids, Vol. 28, 2009, pp. 841-857, Elsevier publishers (Impact Factor 1.815) (Citation:14).
  2. Upadhyay S.H.  Jain S. C. and Harsha, S. P. (2009) “Chaos and Nonlinear Dynamic Analysis of High-Speed Rolling Element Bearings Due to Varying Number of Rolling Elements” International Journal of Nonlinear Sciences and Numerical SimulationVol. 10 (3), pp 323 – 332. (Impact Factor 5.099)
  3. Upadhyay S.H., Jain S.C and Harsha, S. P. (2009) “Nonlinear Vibration Signature Analysis of High Speed Rotating Shaft due to Ball Size Variations and Varying Number of Balls” Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics (IMechE) Vol. 223, pp 83-105. (Impact Factor 0.37) (Citation: 1)
  4. Upadhyay S.H., Jain S.C and Harsha, S. P. (2009) “Vibration Signature Analysis of High Speed Unbalanced Rotor Supported by Rolling Element Bearings due to Off-sized Rolling Elements” International Journal of Acoustics and Vibration, Vol. 14(3), pp 163-171. (Impact Factor 0.291)
  5. Upadhyay S.H., Harsha, S. P. and Jain S.C. (2009)“Nonlinear Dynamics of High Speed Unbalanced Rotor Supported on Rolling Element Bearings” International Journal of Design Engineering   Vol. 2 (2), pp 191-204. Inder science publications
  6. Upadhyay S.H.,Harsha, S. P. and Jain S.C. (2009) “Nonlinear Dynamic Response Analysis of a High Speed Rotor Supported by Rolling Element Bearings due to Waviness”The International Journal of Mathematical Modeling, Simulation and Applications (IJMMSA) Vol. 2 (3), pp 323-333.
  7. Anand Y Joshi, Satish C Sharma, Harsha, S. P. (2009) “Vibration Analysis of Pre-Stressed Single Walled CNT Based Mass Sensor”, International Journal of Electro spun Nano fibers and Applications, 2, (3), 161-170.

(2010)

  1. Upadhyay S.H., Jain S.C and Harsha, S. P. “Analysis of Nonlinear Phenomena in High Speed Ball Bearing System due to Radial Clearance and Unbalanced Rotor Effects” Journal of Vibration and Control, Vol. 16(1), 2010, pp 65-88. SAGE publishers (Impact Factor 1.966)
  2. Anand Y Joshi, Harsha, S. P., Satish C Sharma, “Vibration Signature Analysis of Single Walled Carbon Nanotube Based Nano Mechanical Sensors”, Physica E: Low Dimensional systems & Nanostructures, 42, (8), 2010 2115-2123. Elsevier publishers (Impact Factor 1.17) (Citation: 52)
  3. Anand Y Joshi, Aashish Bhatnagar, Harsha, S. P., Satish C Sharma “Vibratory Analysis of a Doubly Clamped Wavy Single Walled Carbon Nanotube based Nano Mechanical Sensors”, International Journal of Engineering Science & Technology, 2, (5), 2010, 993-1000.
  4. Anand Y Joshi, Aashish Bhatnagar, Harsha, S. P., Satish C Sharma,” Vibration Response Analysis of Doubly Clamped Single Walled Wavy Carbon Nanotube Based Nano Mechanical Sensors” ASME Transactions, Journal of Nanotechnology in Engineering and Medicine, 1, (3), 2010, 031004-1-5. (Citation: 1)
  5. Anand Y Joshi, Harsha, S. P., Satish C Sharma “Dynamic Analysis of a Clamped Wavy Single Walled Carbon Nanotube based Nano Mechanical Sensors”, ASME Transactions, Journal of Nanotechnology in Engineering and Medicine 1, (3), 2010, 031007-1-7 (Citation: 1)
  6. Anand Y Joshi, Harsha, S. P., Satish C Sharma, “Dynamic Behavior of Chiral Fixed Free Single Walled Carbon Nanotube Based Nano Mechanical Mass Sensors due to Atomic Vacancies” Proceedings of IMECH E, Part N: Journal of Nanoengineering and Nanosystems, 224, (2), 2010, 45-56. (Impact Factor 0.6)
  7. Anand Y Joshi, Satish C Sharma, Harsha, S. P., “Analysis of Crack Propagation in Fixed Free Single Walled Carbon Nanotube under Tensile Loading Using XFEM”, ASME Transactions, Journal of Nanotechnology in Engineering and Medicine, 1, (4), 2010, 041008-7.
  8. Anand Y Joshi, Aashish Bhatnagar, Harsha, S. P., Satish C Sharma, “An Investigation of Mass Sensitivity of Fixed Free Single Walled Carbon Nanotube (SWCNT) Based Nano Mechanical Sensors”, Current NanoScience, 6, (6), 2010, 598-603. (Impact Factor 1.472) Bentham Science Publication
  9. Unnati A Joshi, Preeti Joshi, Harsha, S. P., Satish C Sharma, (2010) “Evaluation of the Mechanical Properties of Carbon Nanotube Based Composites by Finite Element Analysis”, International Journal of Engineering Science & Technology, 2(5), 1098-1107.
  10. Unnati A Joshi, Preeti Joshi, Harsha, S. P., Satish C Sharma, (2010) “Evaluation of the Mechanical Properties of CNT based Composites Using Hexagonal RVE,” ASME Transactions, Journal of Nanotechnology in Engineering & Medicine, 1,3, 031006-1-7.
  11. Unnati A Joshi, Satish C Sharma, Harsha S. P., (2010) “Effects of Pinhole defects on the elasticity of Carbon Nanotube based Nano-Composites” ASME Transactions, Journal of Nanotechnology in Engineering & Medicine, 2 (1), 011003-1-7.
  12. Bhavaraju Kalyan M., Kankar P.K., Sharma Satish C. and Harsha, S. P., (2010) “A Comparative Study on Bearings Faults Classification by Artificial Neural Networks and Self-Organizing Maps using Wavelets”, International Journal of Engineering Science and Technology, Vol. 2(5), pp. 1001-1008, Engg Journals Publications.
  13. Khandelwal M., Kankar P.K. and Harsha, S. P. (2010) “Evaluation and prediction of blast induced ground vibration using support vector machine”, Mining Science and Technology, Vol. 20(1), pp. 64-70, Elsevier publishers.
  14. M.K. Bhiwapurkar, V.H. Saran, Harsha, S. P., V.K. Goel, Mats Berg, (2010) “Influence of mono-axis random vibration on reading activity”, Industrial Health, Vol. 48, Number 5,(Impact Factor 1.4).
  15. M.K. Bhiwapurkar, V.H. Saran, Harsha, S. P. (2010) “Effect of multi-axis whole body vibration exposures and subject postures on typing performance”, International Journal of Engineering Science and Technology, Vol. 2(8), 3614-3620.
  16. M. K. Bhiwapurkar, V.H. Saran, Harsha S. P., (2010) Effect of multi axis vibration and subject posture on sketching distortion, International Journal of Engineering Science and Technology,International Journal of Engineering, Science and Technology (Multicraft Pub.- Italy), Vol. 2 (12), pp 14-24.

(2011)

  1. Anand Y Joshi, Harsha, S. P., Satish C Sharma, (2011) “Effect of chirality and atomic vacancies on dynamics of nano resonator based on SWCNT”, Sensor Review, 31, (1), 47-57. (Impact Factor 0.571) (Emerald Publications)
  2. Anand Y Joshi, Harsha, S. P., Satish C Sharma, (2011) “The Effect of Pinhole Defect on Dynamic Characteristics of Single Walled Carbon Nanotube based Mass sensors”, Journal of Computational & Theoretical NanoScience , 8(4). (Impact Factor 0.89) (American Scientific Publications)
  3. Kankar P.K., Sharma Satish C. and Harsha, S. P., (2011) “Fault Diagnosis of Ball Bearings Using Machine Learning Methods”, Expert Systems with Applications, Vol. 38, No. 3, pp. 1876-1886, Elsevier publishers (Impact Factor 2.908).
  4. Kankar P.K., Sharma Satish C. and Harsha S.P. (2011) “Fault Diagnosis of High Speed Rolling Element Bearings Due to Localized Defects using Response Surface Method”, ASME Journal of Dynamic Systems, Measurement and Control, Vol. 133, No. 2, pp. 031007 (1-14)  (Impact Factor 0.84).
  5. Kankar P.K., Sharma Satish C. and Harsha S.P., (2011) “Fault Diagnosis of Ball Bearings Using Continuous Wavelet Transform”, Applied Soft Computing, Vol. 11, No. 2, pp. 2300-2312, Elsevier publishers (Impact Factor 2.415).
  6. M.K. Bhiwapurkar, V.H. Saran, Harsha, S. P., V.K. Goel, Mats Berg, “Effect of magnitudes and directions (mono-axis and multi-axis) of whole body vibration exposures and subjects postures on the sketching performance”, Proceedings of the Institution of Mechanical Engineers, Part F, Journal of Rail and Rapid Transit, 2011, Vol. 225, pp. 71-83 (Impact Factor 2.415)..
  7. Kankar P.K., Sharma Satish C. and Harsha S.P., “Rolling Element Bearing Fault Diagnosis using Autocorrelation and Continuous Wavelet Transform”, Journal of Vibration and Control, In press, SAGE publications (Impact Factor 1.966).
  8. Kankar P.K., Sharma Satish C. and Harsha S.P., “Rolling Element Bearing Fault Diagnosis Using Wavelet Transform”, Neurocomputing, Accepted, Vol. 74, pp. 1638 – 1645, 2011, Elsevier publishers (Impact Factor 1.44).
  9. M. K. Bhiwapurkar, V.H. Saran, Harsha, S. P., Quantitative evaluation of distortion in sketching under mono and dual axis whole body vibration, Industrial Health, doi:10.2486/indhealth.MS1234(Impact Factor 1.44).
  10. Desta Milk, V.H. Saran, Harsha, S. P.,Effects of Inter-Subject Variability and Vibration Magnitude on Vibration Transmission to Head during Exposure to Whole-Body Vertical Vibration, International Journal of Acoustics and Vibration, Vol. 16, No. 2, pp. 88 – 97. (Impact Factor 0.291)
  11. Upadhyay S.H., Jain S.C and Harsha, S. P.. “Chaotic Dynamics of High Speed Rotating Shaft Supported by Ball Bearings Due to Distributed Defects” International Journal of Engineering Science and Technology (Accepted).
  12. Anand Y Joshi, Harsha, S. P., Satish C Sharma, “The Effect of Pinhole Defect on Vibration Characteristics of Single Walled Carbon Nanotube”,Physica E: Low Dimensional systems & Nanostructures, Vol. 43, (5), pp. 1040-1045. (Impact Factor 1.17)
  13. Unnati A Joshi, Satish C Sharma, Harsha S. P., (2011) “Effect of Waviness on the Mechanical Properties of Carbon Nanotube based Composites” Physica E: Low Dimensional systems & Nanostructures, Vol.43, (8), 1453-1460(Impact Factor 1.17).
  14. Anand Y Joshi, Satish C Sharma, Harsha, S. P. “Zeptogram Scale Mass Sensing Using of Single Walled Carbon Nanotube Based Bio Sensors”,Sensors & Actuators: A Physical, Vol. 168, (2),pp. 275-280. (Impact Factor 1.67)
  15. M. K. Bhiwapurkar, V.H. Saran, Harsha, S. P., “Objective and Subjective Responses of Seated Subjects while Reading Hindi Newspaper under Multi Axis Whole-Body Vibration.” International Journal of Industrial Ergonomics (In press). (Impact Factor 0.96)
  16. Unnati A Joshi, Satish C Sharma, S.P. Harsha “Analysis of elastic properties of carbon nanotube reinforced nanocomposites with pinhole defects” Computational Materials Science, Vol. 50, 2011, 3245–3256, Elsevier Publishers, (Impact Factor 1.458).
  17. Unnati A Joshi, S.P. Harsha, Satish C Sharma, “Modeling and analysis of mechanical behaviour of Carbon Nanotube reinforced composites”, Proceedings of IMECH E, Part N: Journal of Nanoengineering and Nanosystems, Institution of Mechanical Engineers, Vol. 225, No.1, 2011, United Kingdom.
  18. Unnati A Joshi, Satish C Sharma, S.P. Harsha, “Influence of Dispersion and Alignment of Nanotubes on the Strength and Elasticity of Carbon Nanotubes Reinforced Composites” ASME Journal of Nanotechnology in Engineering & Medicine,Vol. 2, 2011, 041007-1.
  19. Research Highlights: “Nanotubes as Mass Sensors”, Nature India, doi: 10.1038/ nindia. 2011.119, Published: 18th August, 2011, Nature Publishing Group, United Kingdom.
  20.  
  21. Kankar P.K., Sharma Satish C. and Harsha S.P., “Vibration Based Performance Prediction of Ball Bearings Caused by Localized Defects”,An International Journal of Nonlinear Dynamics and Chaos in Engineering Systems, 2012,Vol. 69, pp. 847-875, Springer (Impact Factor 1.658).
  22. Kankar P.K., Sharma Satish C. and Harsha S.P., “Fault Diagnosis of High Speed Balanced Rotor Supported on Ball Bearings Using Machine Learning Methods”, International Journal of Modelling, Identification and Control, Accepted, 2012, Vol. 15, No. 3, 185-198,Inderscience Publishers.
  23. Unnati A Joshi, Satish C Sharma, S.P. Harsha, “Analysis of Fracture in Carbon Nanotube based Composites Using XFEM”Journal of Computational & Theoretical NanoScience, (Impact Factor 0.89) (American Scientific Publications)Vol. 9(6), 2012, 1–7.
  24. Unnati A Joshi, Satish C Sharma, S. P. Harsha, “Effect of Carbon Nanotube orientation on the Mechanical Properties of Nano Composites”, Composites Part B: Engineering, Elsevier Publishers, 43, 2012, 2063–2071. (Impact Factor 1.763).
  25. Kankar P.K., Sharma Satish C. and Harsha S.P., “Nonlinear Vibration Signature Analysis of a High Speed Rotor Bearing System Due to Race Imperfection”,ASME Journal of Computational and Nonlinear Dynamic, Vol. 7, pp. 011014/1 – 011014-16, 2012.
  26. Anand Y Joshi, Satish C Sharma, S. P. Harsha, “Chaotic response analysis of single walled carbon nanotube due to surface deviations”, NANO(World Scientific press)7, (2), 2012, 1250008/1 - 1250008/10, (Impact Factor 1.106)
  27. Panchal Mitesh B., Upadhyay S.H., Harsha S.P., “Mass detection using single walled boron nitride nanotube as a nanomechanical resonator”, NANO(World Scientific press)7, (4), 2012,
  28. Kankar P.K., Sharma Satish C. and Harsha S.P., “Vibration Signature Analysis of a High Speed Rotor Supported on Ball Bearings Due to Localized Defects”,Journal of Vibration & Control, 2013, 19-12, pp. 1833-1853., (Impact Factor 1.966), DOI: 10.1177/1077546312448506.
  29. Bende Vikrant, Pathak P. M., Kedar S. Dixit and Harsha S.P., “Energy optimal trajectory planning of an underwater robot using a genetic algorithm”, Proceeding of IMECH E, Part I: Journal of Systems & Control Engineering, 2012, 226:1077-1087, (Impact Factor 0.667), DOI: 10.1177/0959651812447232.
  30. Ankit Gupta, Anand Y. Joshi, Satish C. Sharma, S. P. Harsha, “Dynamic Analysis of Fixed-free Single-walled Carbon Nanotube Based Bio-sensors because of Various Viruses' ”, IEEE Nano-biotechnology (Impact Factor 1.87), Volume 6, issue 3, 2012, p. 115 - 121 (Impact Factor 1.000) DOI:10.1049/iet-nbt.2011.0057.
  31. M. K. Bhiwapurkar, V.H. Saran, Harsha, S. P., “Interference in Reading E-Paper under Whole-Body Vibration Exposure with Subject Posture.” International Journal of Acoustics & Vibrations, Vol. 17, No. 2, 2012, pp. 100-107.
  32. Anand Y Joshi, Satish C Sharma, S. P. Harsha, “Nonlinear Dynamic Analysis of Single walled carbon nanotube based mass sensors due to surface deviations”, ASME Journal of Nanotechnology in Engineering and Medicine,2(4), 041008 (Apr 04 2012); DOI: 10.1115/1.4005663.
  33. Unnati A Joshi, Satish C Sharma, S. P. Harsha, “A Multiscale Approach for
    Estimating the Chirality Effects in Carbon Nano Tube Reinforced
    Composites”, Physica E: Low Dimensional systems & Nanostructures, 45, (2012),pp. 28–35 (Impact Factor 1.17).
  34. P.K. Kankar, Satish C. Sharma and S.P. Harsha, “Fault Diagnosis of Rolling Element Bearing Using Cyclic Autocorrelation and Wavelet Transform”, Neurocomputing, 110: 9-17 (2012), Elsevier publishers.
  35. Gajbhiye S.C., Upadhyay S.H., Harsha S.P.,“Wrinkling Dynamics of Membrane based on User defined Wrinkling Pattern,”International Journal of Computational Material Science and Engineering, Vol. 1, No. 4, 1250034 (11pages),World Scientific Publishing Co., DOI:10.1142/S2047684112500340)(Impact factor: 1.05)
  36. Gajbhiye, S.C., Upadhyay, S.H., and Harsha, S.P., Free vibration analysis of flat thin membrane, International Journal of Science Engineering and Technology, Vol. 4, No. 8, pp. 3942–3948, 2012.

(2013)

  1. Pandya D.H., Upadhyay S H and Harsha S. P., “Fault Diagnosis of Rolling Element Bearing with Intrinsic Mode Function of Acoustic Emission data using APF-KNN” Expert Systems with Applications, Vol. 40, 2013, pp. 4137-4145, Elsevier publishers (Impact Factor 2.45), (Citation: 01)
  2. D. Venkateswarlu, N. R. Mandal, M. M. Mahapatra and S. P. Harsha, “Threaded Tool Designs and Their Effects on Friction Stir Welded AA7039 Aluminium Alloys, Welding Journal (American Society of Welding), Vol 92, pp. 41 – 47, Feb 2013
  3. Gajbhiye S.C., Upadhyay S.H., Harsha S.P., Vibration analysis of inflatable torus based on mode shape, American Institute of Aeronautics and Astronautics Journal, Vol. 56 , No. 06, pp. 1526-1532, 2013. (Impact Factor 1.057)
  4. Panchal Mitesh B., Upadhyay S.H., Harsha S.P., 'Effect of Chirality on Resonant Behavior of Single Walled BN Nanotube Based Nanomechanical Resonator', Current Nanoscience. 9 (4), 2013, 525-531. Bentham Science Publishers. (Impact Factor=1.776)
  5. Panchal Mitesh B., Upadhyay S.H., Harsha S.P., 'An Efficient Finite Element Model For Analysis Of Single Walled Boron Nitride Nanotube Based Resonant Nanomechanical Sensors'. NANO: Brief Reports and Reviews, 8 (1), 2013, 1350011(1-16). World Scientific Publishing Co., DOI:10.1142/S1793292013500112, ), (Impact Factor=1.19) , (Citation: 03) 
  6. Pandya D.H., Upadhyay S H and Harsha S. P., “Nonlinear Dynamic Analysis of High Speed Bearings Due to Combined Localized Defects”- Journal of Vibration and Control, 2013 SAGE publication, DOI: 10.1177/1077546313483790, (Impact Factor 1.966).
  7. Pandya D.H., Upadhyay S H and Harsha S. P., “Fault Diagnosis of Rolling Element Bearing by using Multinomial Logistic Regression and Wavelet Packet Transform”-Soft Computing, Springer publishers, DOI 10.1007/s00500-013-1055-1, (Impact Factor 1.88).
  8. Gajbhiye S.C., Upadhyay S.H., Harsha S.P., Non-linear vibration analysis of piezo-actuated flat thin membrane, Journal of Vibration and Control,  2013, (DOI: 10.1177/1077546313493456) (Impact Factor 1.966)
  9. Gajbhiye S.C., Upadhyay S.H., Harsha S.P., Effects of photostrictive actuator and active control of flexible membrane structure, Smart Structures and Systems, Vol. 14 No. 2, 2014 [Techno Press], (Impact Factor 1.16)
  10. Yadav H., Upadhyay S.H., Harsha S.P.,“Study of effect of Unbalanced Force for High Speed Rotors.” Procedia Engineering (Elsevier Publisher) 64, 2013 pp 593 – 602.
  11. Nagvendra Kumar Kanoje, Satish C. Sharma, Suraj P. Harsha, “Response Surface Method based Railway Wheel Optimisation for Natural Frequency,” International Journal of Vehicle Structures and Systems, Vol 5, No. 3-4, 2013

(2014)

  1. Harsha S. P., M. Desta, A. S. Prashanth, V. H. Saran, “Measurement and Bio-dynamic Model Development of Seated Human Subjects Exposed to Low Frequency Vibration Environment.” International Journal of Vehicle Noise and Vibrations (IJVNV), Inderscience Publishers, 10 (2), 2014, 1- 24.
  2. Gajbhiye S.C., Upadhyay S.H., Harsha S.P.,“Finite element analysis of an inflatable torus considering air mass structural element,”Advances in Space Research,Volume 53, Issue 1, 2014, Pages 163-173 (Impact Factor 1.238)
  3. Gananath D. Thakre, Satish C. Sharma, Harsha S. P., M.R. Tyagi “Tribological failure analysis of gear contacts of Exciter Sieve gear boxesEngineering Failure Analysis (Elsevier Publisher), Volume 36, 2014, pp 75-91. (Impact Factor 1.057)
  4. Nagvendra Kumar Kanoje,  Satish C. Sharma  and S.P. Harsha, EPFM Analysis Of Subsurface Crack Beneath A Wheel Flat Using Dynamic Condition, Procedia Material Science 2014 Vol 14 (C) pp. 43-60.
  5. Nagvendra Kumar Kanoje,  Satish C. Sharma  and S.P.Harsha, Wheel-Rail And Wheel-Flat As A Coupled System: Contact Dynamics Modeling with Finite Element Analysis, Journal of Coupled System and Dynamics, American Scientific Publisher Vol 2 No. 2, pp. 20-27, 2014
  6. Sandesh Trivedi, Satish C. Sharma and S. P. Harsha, ‘"Single walled-boron nitride nanotubes based nano-resonator for sensing of acetone molecules" NANO, World Scientific Publishing, (Impact Factor=1.26), Vol. 9, No. 8, 2014.
  7. A K Gupta andS.P. Harsha, “Effect of crack and determination of fracture energy of carbon nanotube reinforced polymer composites” Proceedings of IMECH E, Part N: Journal of Nanoengineering and Nanosystems, Institution of Mechanical Engineers, Accepted, United Kingdom. (Impact Factor=0.22)doi:10.1177/1740349914531758
  8. Sandesh Trivedi, Satish C. Sharma and S. P. Harsha, ‘"Strength Analysis of Boron Nitride Nanotube Reinforced Nanocomposites" Journal of Computational and Theoretical Nanoscience (Impact Factor=1.032) Accepted
  9. Nagvendra Kumar Kanoje,  Satish C. Sharma  and S.P.Harsha, Subsurface Crack Propogation With Different Inclusion Under A Wheel Flat-LEFM Analysis Using Dynamics Conditions, International Journal of Vehicle Noise and Vibrations(IJVNV) 2014 (Accepted)
  10. A K Gupta andS.P. Harsha, ‘Analysis of Mechanical Properties of Carbon Nanotube Reinforced Polymer Composites using Continuum Mechanics Approach, Procedia Material Science 2014 Vol 14 (C) pp. 18 – 25.
  11. Sandesh Trivedi, Satish C. Sharma and S. P. Harsha, ‘Evaluations of young’s modulus of boron nitride nanotube reinforced nano-composites’ Procedia Material Science 2014 Vol 14 (C) pp. 1899 - 1905.
  12. Paras Ram, S H Upadhyay and S P Harsha, ‘Controlling damping force during aircraft arrestment using self-energized valve mechanism’ Procedia Technology 2014 Vol 14 (C) pp. 43-60.
  13. S. S. Harak, S. C. Sharma and S. P. Harsha, ‘Structural dynamic analysis of freight railway wagon using finite element method, Procedia Material Science 2014 Vol 14 (C) pp. 1891 - 1898.
  14. V Devuri, M. M. Mahapatra, S. P. Harsha and N. R. Mandal, ‘Effect of Shoulder Dimension and Geometries on FSW of AA7039’ Journal of Manufacturing Science & Production,  Vol 14, No. 3, pp. 183 – 194, 2014

(2015)

  1. S. S. Harak, S. C. Sharma and S. P. Harsha, ‘Modal Analysis of Prestressed Draft Pad of Freight Wagon Using FEM, Journal of Modern Transportation,(Springer Publication), Vol 23, No. 1, pp. 43 – 49, 2015
  2. D. H. Pandya, S. H. Upadhyay and S.P. Harsha, ‘Fault diagnosis of high-speed rolling element bearings using wavelet packet transform’, International Journal of Signal and Imaging System Engineering, Vol 8, No. 6 pp 390 – 401, 2015.
  3. Shashank B. Kedare, S.C. Sharma, S.P. Harsha, “Computational Fluid Dynamics Analysis of Empty Railway Freight Wagons,” International Journal of Vehicle Structures and Systems, Vol 7, No. 1, 2015
  4. Sachin S. Harak, Satish C. Sharma, Sanjay Shukla, Parinay Gupta, Sanjay Kumar, Suraj P. Harsha,  “Effect of Multiple Location Defects on the Dynamics of Draft Gear used in Freight Railway Wagon,” International Journal of Vehicle Structures and Systems, Vol 7, No. 3, 2015
  5. Sachin Sudhakar HarakSandipp Krishnan RaviSatish Chandra SharmaSuraj P Harsha,  “Effect of vertical track irregularities on the dynamics of freight railway wagon,” International Journal of Vehicle Noise and Vibrations (IJVNV), Vol 11, No. 2, pp. 133 – 148, 2015
  6. Sandesh Trivedi, Satish C. Sharma and S. P. Harsha, “Biosensing application of multiwall boron nitride nanotube based nanoresonator for detecting various viruses / bacteria,”IEEE/IET Nano-biotechnology, Vol. 9, No. 5, pp. 259 – 263, 2015
  7. A K Gupta and S.P. Harsha, “Multiscale Modeling Approach for Estimation of Pinhole Defects in Polymer Nanocomposites, NANO(World Scientific press), Vol. 10, No. 2, 2015.
  8. Gananath D. Thakre, Satish C. Sharma, S. P. Harsha, M. R. Tyagi, “A Parametric investigation on the microelastohydrodynamic lubrication of power law fluid lubricated line contact”, Proc. IMechE Part J: J Engineering Tribology, Vol. 229(10), Pages 1187-1205, 2015.
  9. Akash Shukla and S.P. Harsha, “An experimental and FEM modal analysis of cracked and normal Steam Turbine Blade, Materials Today, (Elsevier press, Scopus index), Vol. 10, No. 4-5, 2056 – 2063.

(2016)

  1. Gananath D. Thakre,Satish C. Sharma, S. P. Harsha, M. R. Tyagi, “A Study of ionic liquid lubricated μ-EHL line contacts considering surface texture”, Tribology International, Volume 94, Pages 39-51, 2016. (Impact factor = 2.1)
  2. A K Gupta and S.P. Harsha, ‘Analysis of mechanical properties of carbon nanotube reinforced polymer composites using multi-scale finite element modeling approach’, Composite Part B (Elsevier Sc)Volume 95, 2016, pp 172-178. (Impact factor = 2.8)
  3. Mahesh Bhiwapurkar, V Huzur Saran, Suraj P Harsha, “Studying the effect of whole body vibration exposures, direction and postures on writing performance of train passengers,” Journal of Advances in Vehicle Engineering (JAVE), Vol. 2, No.1, pp. 29 – 41, 2016
  4. Lalit Kumar and S. P. Harsha, ‘Effect of carbon nanotube on FGM nano-plate under thermos-mechanical loading, Procedia Technology, (Elsevier press, Scopus index), 2016Vol 23. pp. 130 – 137.
  5. Anuj K Singh, S. P. Harshaand A. Parashar, ‘Finite Element Analysis of CNT reinforced epoxy composite due to thermos-mechanical loading, Procedia Technology, (Elsevier press, Scopus index), 2016Vol 23. pp. 38 – 143.
  6. Vinod Nistane and S. P. Harsha, ‘Failure Evaluation of Ball Bearing for Prognostics”, Procedia Technology, (Elsevier press, Scopus index), 2016Vol 23. pp. 179 – 186.
  7. Akash Shukla and S.P. Harsha, “Vibration Response Analysis of Last Stage LP Turbine Blades for Variable Size of Crack in Root”, Procedia Technology, (Elsevier press), 2016 Vol 23, 232 – 239.
  8. S. S. Harak, S. C. Sharma and S. P. Harsha, ‘Dynamic Analysis of Draft Gear and Draft Pad of Freight Wagon Due to Localized Defects Using FEM, International Journal of Acoustics and Vibrations (Accepted), 2016Vol 21, No. 3, pp. 281 – 291. (Impact factor = 0.389)
  9. Mahesh Bhiwapurkar, Suraj P Harsha, V Huzur Saran,  “Effects of vibration magnitude and posture on seat-to-head transmissibility responses of seated occupants exposed to lateral vibration,” International Journal of Vehicle Noise and Vibrations (IJVNV), 2016,Vol 12, No. 1, pp 42 – 59. (IF 0.25)
  10. Mahesh Bhiwapurkar, Suraj P Harsha, V Huzur Saran,  “Interference in writing performance under whole-body vibration exposure together with subject posture,” International Journal of Vehicle Noise and Vibrations (IJVNV), 2016,Vol 12, No. 2, pp 107 – 122. (IF 0.25)
  11. Mahesh Bhiwapurkar, V Huzur Saran andSuraj P Harsha “Seat to Head Transmissibility during Exposure to Vertical Seat Vibration: Effects of Posture and Vibration Magnitude,” International Journal of Acoustics and Vibrations (IJAV), 2016, Vol 21, No. 1, pp 67 – 74. (Impact factor = 0.389).

(2017)

  1. Deepak Mehra, MM Mahapatra andSuraj P Harsha “Effect of wear parameters on dry abrasive wear of RZ5-TiC in-situ composite,” Industrial Lubrication & Tribology2017, Vol 69, No. 6 (Impact factor = 0.605).
  2. Deepak Mehra, MM Mahapatra andSuraj P Harsha “Optimization of RZ5-TiC MMC wear parameters using Taguchi approach,” Industrial Lubrication & Tribology, (Accepted). (Impact factor = 0.605).
  3. VM Nistane andSuraj P Harsha “Prognosis of degradation progress of ball bearings using supervised machine learning,” Proceedings of IMECH E, Part K: Journal of Multibody Dynamics(Accepted),(Impact factor = 1.242).
  4. HK Yadav, DH Pandya andS P Harsha “Nonlinear vibration signature analysis of a rotor supported ball bearings,” International Journal of Nonlinear Dynamics & Control, (Accepted).
  5. N K Kanoje, S.C. Sharma, S.P. Harsha, “Computational Fluid Dynamics Analysis of Empty Railway Freight Wagons,” International Journal of Vehicle Structures and Systems, Vol 9, No. 3, 2017
  6. Aman Kumar, V Huzur Saran, and Suraj P Harsha, “Biodynamic modelling of seated human body under whole body vibration exposure using an artificial neural network,” International Journal of Vehicle Noise and Vibrations (IJVNV), (Accepted). (IF 0.25)
  7. Deepak Mehra, MM Mahapatra andS.P. Harsha, “Modeling of wear Process Parameters of In-situ RZ5 10 wt% TiC compost using ANN, Materials Today, (Elsevier press, Scopus index) accepted.
  8. Deepak Mehra, MM Mahapatra andS.P. Harsha, “Abrasive Wear Behaviour of In-situ RZ5 10 wt% TiC Composite, American Institute Physics, (Elsevier press) accepted.

National Journal: 02

  1. P.P. Singh, J. Yadav, M.K. Bhiwapurkar, V.H. Saran andHarsha S. P., (2010), “A futuristic model for activity comfort using Artificial Neural Network”, Indian Journal of Engineering, Science and Technology,  Vol.4 No.1, pp. 232 – 245.
  2. Sandesh Trivedi, Satish C. Sharma, and S. P. Harsha, “Dynamic Analysis of Single Walled Boron Nitride Nanotube Reinforced Composite Based Nanomechanical Resonator,” Journal of the Institution of Engineers (India): Series D, 2014. (Springer publication)