Spotlight
Home
Faculty Profiles
Student Homepages
IITR Home
Publications
  • In SCI Journals (2006-11) 

Year 2011

  1. Singh S, Dutt D, Tyagi CH, “Complete characterization of wheat straw (triticum aestivum pbw-343 l. Emend. Fiori & paol.)-a renewable source of fibres for pulp and paper making”,
    Bioresources, 2011, Vol.6, Issue 1:154-177
    .
  2. Kumar, Parveen, Kumar, Satish, Bhardwaj, Nishi Kant, Choudhary, Ashutosh Kumar, Optimization of process parameters for the photocatalytic treatment of paper mill wastewater, Environmental Engineering and Management Journal(2011), 10(5), 595-601.
  3. Kumar, Nitin, Bhardwaj, Nishi K., Chakrabarti, Swapan K., Influence of pigment blends of different shapes and size distributions on coated paper properties, Journal of Coatings Technology and Research(2011), 8(5), 605-611.
  4. Kumar, Nitin, Bhardwaj, Nishi K., Chakrabarti, Swapan K., Influence of particle size distribution of calcium carbonate pigments on coated paper whiteness, Journal of Coatings Technology and Research(2011), 8(5), 613-618.
  5. Neetu Rani, R. C. Maheshwari, Vivek Kumar and V. K. Vijay, “Purification of pulp and paper mill effluent through Typha and Canna using constructed wetlands technology” Journal of Water Reuse and Desalination, 4(1), 2011, pp 237-242.
  6. Verma Nitin; Bansal M. C.; Kumar Vivek, “Enzymatic deinking of old news paper (ONP)by cellulase produced by various fungal strains”, Journal of Pure and Applied Microbiology, Vol 5 No. 2 749-754, 2011
  7. Verma Nitin, Bansal Mukesh C., Kumar Vivek, “Scanning Electron Microscopic Analysis of Aspergillus niger Pellets and Biofilms under Various Process Conditions”’ International Journal of Microbiological Research, 2011, Vol. 2, Issue 1: 8-11.
  8. Bansal Mukesh C., Kumar Vivek, Kulkarni Shilpa “Combined Deinking Technology to improve the quality of recycled paper”, IPPTA Journal, Vol 23 No.3: 145-148 2011
  9. Verma Nitin, Bansal Mukesh C., Kumar Vivek, “Enzymatic and other recent approaches in waste paper recycling technology”, Journal of Industrial Research & Technology, 2011Vol. 1,Issue 1:46-55
  10. Kumar P, Negi YS, Singh SP, “Offset printing behavior of bagasse and hardwood paper sheets loaded by in-situ precipitation”, Bioresources, 2011, Vol.6, Issue 1:207-218.
  11. Pathak P, Bhardwaj NK, Singh AK, “Optimization of chemical and enzymatic deinking of photocopier waste paper”, Bioresources, 2011, Vol.6, Issue 1:447-463.  
  12. Banavath HN, Bhardwaj NK, Ray AK, “A comparative study of the effect of refining on charge of various pulps”, Bioresource technology, 2011, Vol. 102, Issue 6:4544-4551.   
  13. Verma Nitin; Bansal M. C.; Kumar Vivek, “Effect of Sugars Replacement on the Growth of Aspergillus niger and Neurospora crassa under Submerged Cultivation”,Journal of Pure and Applied Microbiology, 2011, Vol.5, Issue 1:247-252.
  14. Verma Nitin, Bansal Mukesh C., Kumar Vivek, “Pea Peel Waste: A Lignocellulosic Waste And Its Utility In Cellulase Production By Trichoderma Reesei”, Bioresources, 2011, Vol. 6, Issue 2:1505-1519.
  15. Singh, S., Dutt, D., Tyagi, C.H. and Upadhyaya, C.H., “Bio-conventional bleaching of wheat straw soda-AQ pulp with crude xylanases from SH-1 NTCC-1163 and SH-2 NTCC-1164 strains of Coprinellus disseminatus to mitigate AOX generation”, New Biotechnology, 2011, Vol. 28, Issue 1:47-57.
  16. Lal, M.,  Dutt, D. and Tyagi, C.H., “Bio-conventional bleaching of kraft-AQ pulp of A. cadamba by crude xylanases from Coprinellus disseminatus MLK03 and effect of residual enzyme on effluent load”, BioResources, 2011, Vol. 6, Issue 2:1019-1028.
  17. Kaur, H., Dutt, D. and Tyagi, C.H., “Optimization of soda pulping process of ligno-cellulosic residues of lemon and sofia grasses produced after steam distillation”, BioResources, 2011, Vol. 6, Issue 1:103-120.
  18. Dutt, D., Jain,R.K.,Maheshwari, A. and Kaur,H.,“Cost reduction studies of decorative laminates”, BioResources, 2011, Vol. 6, Issue 2:1495-1501.
  19. Tyagi, C.H., Singh, S. and Dutt, D., “Effect of two fungal strains of Coprinellus disseminatus SH-1 NTCC-1163 and SH-2 NTCC-1164 on pulp refining and mechanical strength properties of wheat straw soda-AQ pulp”, Cellulose Chemistry and Technology, 2011, Vol. 45, Issue 3-4:257-263.
  20. Vidyarthi, A.K., Dutt, D. and Upadhyaya, J.S., “Reduction of pollutants in paper mill effluents by aquatic plants”, Cellulose Chemistry and Technology, 2011, Vol. 45, Issue 3-4:291-296.
  21. Dutt, D. and Tyagi, C.H., “Determination of microorganisms in paper machine white water system and killing effect of 2,2-dibromo-3-nitrilopropionamide, 2-(thiocyanomethylthio) benzothioazoleand alkali dimethyl benzyl ammonium chloride on runnability of paper machine and paper quality”, Cellulose Chemistry and Technology, 2011, Vol. 45, Issue 5-6.
  22. Dutt, D. and Tyagi, C. H., “Comparison of various eucalyptus species for their morphological, chemical, pulp and paper making characteristics”, Ind. J. Chemical Technology, 2011, Vol.18, Issue 2:145-151.

Year 2010

  1. Bala, P. K., Sural, S., Banerjee, R. N., “Association rule for purchase dependence in multi-item inventory”, Production Planning & Control, 2010, Vol. 21, Issue 3:274-285.
  2. Tyagi S, Ray AK, “Evaluation of coated paper quality using a plackett-burman statistical design”, Cellulose Chemistry and Technology, 2010, Vol.44, Issue 9:407-414.  
  3. Shukla SK, Kumar V, Mudgal M, et al., “Utilization of concentrate of membrane filtration of bleach plant effluent in brick production”, Journal of Hazardous Materials, 2010, Vol.184, Issue 1-3:585-590.  
  4. Rani M, Agarwal A, Maharana T, et al., “A comparative study for interpenetrating polymeric network (ipn) of chitosan-amino acid beads for controlled drug release”, African Journal of Pharmacy And Pharmacology, 2010, Vol. 4, Issue 2:35-54.   
  5. Rani M, Agarwal A, Negi YS, “Review: chitosan based hydrogel polymeric beads - as drug delivery system”, Bioresources, 2010, Vol.5, Issue 4:2765-2807.   
  6. Tyagi S, Ray AK, Sood YV, “Surface characteristics of coating layers formed by coating pigments with different particle sizes and size distribution”, Journal of Coatings Technology and Research, 2010, Vol.7, Issue 6:747-756.   
  7. Dutt D, Upadhyaya JS, Tyagi CH “Studies on hibiscus cannabinus, hibiscus sabdariffa, and cannabinus sativa pulp to be a substitute for softwood pulp- part 1: as-aq delignification process”, Bioresources, 2010, Vol. 5, Issue 4:2123-2136.   
  8. Dutt D, Upadhyaya JS, Tyagi CH, “Studies on hibiscus cannabinus, hibiscus sabdariffa, and cannabinus sativa pulp to be a substitute for softwood pulp-part 2: sas-aq and nssc-aq delignification processes”, Bioresources, 2010, Vol.5, Issue 4:2137-2152.  
  9. Malkapuram R, Kumar V, Negi YS, “Novel treated pine needle fiber reinforced polypropylene composites and their characterization”, Journal of Reinforced Plastics and Composites, 2010, Vol. 29, Issue 15:2343-2355.   
  10. Agnihotri S, Dutt D, Tyagi CH, et al., “Production and biochemical characterization of a novel cellulase-poor alkali-thermo-tolerant xylanase from coprinellus disseminatus sw-1 ntcc 1165”,
    World Journal of Microbiology & Biotechnology, 2010, Vol.26, Issue 8:1349-1359.   
  11. Thangaraj R, Pant M, Deep K, “Optimal coordination of over-current relays using modified differential evolution algorithms”, Engineering Applications of Artificial Intelligence, 2010  Vol. 23, Issue 5:820-829.   
  12. Dutt D, Tyagi CH, “Studies on ipomea carnea and cannabis sativa as an alternative pulp blend for softwood: optimization of soda pulping process”, Journal of Scientific & Industrial Research,   2010, Vol.69, Issue 6:460-467.   
  13. Lal M, Dutt D, Tyagi Ch, Et Al., “Characterization of anthocephalus cadamba and its delignification by kraft pulping”, Tappi Journal, 2010, Vol.9, Issue 3:30-37.   
  14. Agnihotri S, Dutt D, Tyagi CH, “Complete characterization of bagasse of early species of saccharum officinerum-co 89003 for pulp and paper making”, Bioresources,  2010, Vol.5, Issue 2:1197-1214.   
  15. Kumar S, Upadhyaya JS, Negi YS, “Preparation of nanoparticles from corn cobs by chemical treatment methods”, Bioresources, Vol.5, Issue 2:1292-1300.
  16. Ghatak HR, Kundu PP, Kumar S, “Thermochemical comparison of lignin separated by electrolysis and acid precipitation from soda black liquor of agricultural residues”, Thermochimica Acta, 2010, Vol. 502, Issue 1-2:85-89.   
  17. Sutar AK, Maharana T, Dutta S, et al., “Ring-opening polymerization by lithium catalysts: an overview”, Chemical Society Reviews, 2010, Vol.39, Issue 5:1724-1746.   
  18. Sood YV, Tyagi R, Tyagi S, et al., “Surface charge of different paper making raw materials and its influence on paper properties”, Journal of Scientific & Industrial Research, 2010, Vol. 69, Issue 4:300-304.   
  19.  Thangaraj R, Pant M, Abraham A “New mutation schemes for differential evolution algorithm and their application to the optimization of directional over-current relay settings”,
    Applied Mathematics and Computation, 2010, Vol. 216, Issue 2:532-544.
  20. Shukla SK, Kumar V, Bansal MC “Treatment of combined bleaching effluent by membrane filtration technology for system closure in paper industry”, Desalination and Water Treatment, 2010, Vol.13, Issue 1-3:464-470.
  21. Dutt D, Tyagi CH, Agnihotri S, et al., “Bio-soda pulping of lignocellulosic residues of palma rosa grass: an attempt towards energy conversion”, Indian Journal Of Chemical Technology, 2010, Vol.17, Issue 1:60-70.
  22. Kumar D, Kumar V, Singh VP, “Mathematical modeling of brown stock washing problems and their numerical solution using  MATLAB”, Computers & Chemical Engineering, 2010, Vol.34, Issue 1:9-16.  
  23. Sanjay Tyagi and A.K.Ray, “Calendering Response of Calcium Carbonate Coated base paper containing agro-residue pulp”- TAPPSA J. (Journal for the Technical association of Pulp and Paper Industry of South Africa), 2010, Vol.1:10-19.
  24. Tadimeti, Dattratreya Jogi Ganesh, N.K. Bhardwaj, and A.K. Ray “Parametric Effects on Calendering Heat Transfer Model”, J. of Professional Papermaking, 2010,  57-61

Year 2009

  1. Verma N, Bansal MC, Kumar V, “Studies on pelleted form of growth morphology achieved by aspergillus strains with different sugar treatment under submerged cultivation”, Journal of Pure and Applied Microbiology, 2009, Vol.3, Issue 2:559-565.   
  2. Ali M, Pant M, Abraham A, “Simplex differential evolution”, Acta Polytechnica Hungarica, 2009, Vol.6, Issue 5:95-115.   
  3. Dhyani A, Tewari BS, Ajay ,“Interplay of the single particle and josephson cooper pair tunneling on supercurrent across the superconducting quantum dot junction”, Physica E-Low-Dimensional Systems & Nanostructures, 2009, Vol.42, Issue 2:162-166.   
  4. Dutt D, Tyagi CH, Agnihotri S, et al., “Alkoxygen and alkoxygen-aq delignification of ipomea carnea and cannabis sativa”, Indian Journal of Chemical Technology, 2009, Vol.16, Issue 6:523-528.
  5. Kukreja VK, Ray AK, “Mathematical modeling of a rotary vacuum washer used for pulp washing: a case study of a lab scale washer”, Cellulose Chemistry and Technology, 2009, Vol. 43, Issue 1-3:25-36.  
  6. Pant M, Thangaraj R, Abraham A, “Low discrepancy initialized particle swarm optimization for solving constrained optimization problems” Fundamenta Informaticae, 2009, Vol.95, Issue 4:511-531.   
  7. Arora R, “Asymptotical solutions for a vibrationally relaxing gas” Mathematical Modelling and Analysis, 2009, Vol.14, Issue 4:423-434.
  8. Singh S, Tyagi CH, Dutt D, et al., “Production of high level of cellulase-poor xylanases by wild strains of white-rot fungus coprinellus disseminatus in solid-state fermentation”, New Biotechnology, 2009, Vol. 26, Issue 3-4:165-170.
  9. Kumar S, Singh SP, Mishra IM, et al.,“Ethanol and xylitol production from glucose and xylose at high temperature by kluyveromyces sp iipe 453”, Journal of Industrial Microbiology & Biotechnology, 2009, Vol.36, Issue 12:1483-1489.   
  10. Goyal RK, Tiwari AN, Mulik UP, et al.,“Thermal, mechanical, and dielectric properties of high performance peek/ain nanocomposites”, Journal of Nanoscience and Nanotechnology, 2009, Vol.9, Issue 12:6902-6909.   
  11. Chung KY, Mishra NC, Wang CC, et al., “Fabricating scaffolds by microfluidics” Biomicrofluidics, 2009, Vol.3, Issue 2: 022403.   
  12. Arora R, Tomar A, Singh VP, “Shock waves in reactive hydrodynamics”, Shock Waves, 2009, Vol.19, Issue 2:145-150.   
  13. Malkapuram R, Kumar V, Negi YS, “Recent development in natural fiber reinforced polypropylene composites” Journal of Reinforced Plastics and Composites, 2009, Vol.28, Issue 10:1169-1189.   
  14. Maharana T, Mohanty B, Negi YS, “Melt-solid polycondensation of lactic acid and its biodegradability” Progress In Polymer Science, 2009, Vol. 34, Issue 1:99-124.   
  15. Dutt D, Upadhyay JS, Singh B, et al., “Studies on hibiscus cannabinus and hibiscus sabdariffa as an alternative pulp blend for softwood: an optimization of kraft delignification process”, Industrial Crops and Products, 2009, Vol.29, Issue 1:16-26.   
  16. Tyagi, C.H., Dutt, D. and Sharma, M.K., “Cost Reduction through maintenance of compressed air system in pulp and paper industry”, IPPTA J., 2009, Vol. 21, Issue 2:99-102.
  17. Dutt, D., Upadhyaya, J.S., Tyagi, C.H. and Mittal, A., “Oxygen delignification: An effective back-end modification to mitigate kappa number prior to bleaching”, IPPTA J., 2009, Vol. 21, Issue 2:151-153.
  18. Singh, S., Dutt, D., Tyagi, C.H., Upadhyaya, J.S., “Production and partial characterization of xylanases by Coprinellus disseminatus strains SH-1 and SH-2 under solid state fermentation using cheap lignocellulosic substrates”, New Biotechnology, 2009, Vol. 26, Issue 3/4:165-170.
  19. Dutt, D., Upadhyaya, J.S., Tyagi, C.H. and Kumar, A. and Siddhartha, “Alkoxygen and alkoxygen-AQ delignification of Ipomea carnea and Cannabis sativa”, Indian Journal of Chemical Technology, 2009, Vol. 48, Issue 6:523-528.
  20. S. V. Taralkar, S. Chattopadhyay, V. G. Gaikar; “Extraction of Betulinic Acid from Leaves of Vitex Negundo Linn.- Experimental Study and Mathematical Model”, Med. Jr. of DYP Uni., 2009, Vol-II, Issue.III:77-85.
  21. Kumar, S., Singh, S. P., Mishra, I. M., and Adhikari, D. K., “Ethanol and xylitol production from glucose and xylose at high temperature byKluyveromyces sp. IIPE453”, J. Ind. Microbiol. Biotechnology,2009,Vol. 36: 1483-1489.
  22. Kumar, S., Singh, S. P., Mishra, I. M., and Adhikari, D. K., “Recent advances in production of bioethanol from lignocellulosic biomass”, Chem. Eng. Technol., 2009, Vol. 32, Issue 4:517-526.
  23. Kumar, P., Gautam, S. K., Kumar, V. and Singh, S. P., “Enhancement of optical properties of bagasse pulp by in-situ filler precipitation”, BioResources, 2009, Vol. 4, Issue 4:1635-1646.

Year 2008

  1. Suresh kumar M.S., Goyal R.K., Negi YS, “Potential applications of polystyrene in optoelectronics” Progress In Rubber Plastics and Recycling Technology, 2008, Vol.24, Issue 1:53-71.   
  2. Arora R, “Non-planar shock waves in a magnetic field” Computers & Mathematics With Applications, 2008, Vol.56, Issue 10:2686-2691.   
  3. Goyal RK, Tiwari AN, Mulik UP, et al., “Study on microhardness, dynamic mechanical, and tribological properties of peek/A2O3 composites” Journal Of Applied Polymer Science, 2008, Vol.110, Issue 6:3379-3387.
  4. Ghosal S, Muruganandam AV, “Fullerene-dbp conjugates: their co-occurrence in meteorites, ammonites and shilajit, and application in systemic drug delivery” Journal of The Indian Chemical Society, 2008, Vol.85, Issue 9:911-919.
  5. Dutt D, Upadhyaya JS, Tyagi CH, et al., “Studies on ipomea carnea and cannabis sativa as an alternative pulp blend for softwood: an optimization of kraft delignification process”, Industrial Crops and Products, 2008, Vol.28, Issue 2:128-136.   
  6. Goyal RK, Tiwari AN, Negi YS, “Microhardness of peek/ceramic micro- and nanocomposites: correlation with halpin-tsai model”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2008, Vol.491, Issue 1-2:230-236.   
  7. Upadhyaya JS, Dutt D, Singh B, et al., “Hibiscus cannabinus and hibiscus sabdariffa as an alternative pulp blend for softwood: optimization of soda pulping process”, Indian Journal of Chemical Technology, 2008, Vol.15, Issue 3:277-286.
  8. Goyal RK, Tiwari AN, Negi YS, “High performance nanocomposites for tribological applications: preparation and characterization”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2008, Vol.486, Issue 1-2:602-610.
  9. Kumar SS, Singh NA, Kumar V, et al., “Impact of dust emission on plant vegetation in the vicinity of cement plant”, Environmental Engineering and Management Journal, 2008, Vol.7, Issue 1:31-35.
  10. Dutt, D., Tyagi, C. H., Upadhyaya, J. S. and Swarnima, “Development of specialty paper is an art: Overlay paper from indigenous raw material: Acacia tortalis part¾XVI”, IPPTA J., 2008, Vol. 20, Issue 2:77-80.
  11. Dharm Dutt, Tyagi, C. H. and Upadhyaya, J. S., “A practical approach for eradication of fluff problem in paper industry: causes and remedies”, IPPTA J., 2008, Vol. 20, Issue 4:119-125.
  12. Dutt, D., Upadhyay, J.S., Tyagi, C. H., Kumar, A. and Lal, M., “Studies on Ipomea carnea and Cannabis sativa as an alternative pulp blend for softwood: an optimization of kraft delignification process”, Ind. Crops Prod. (Elsevier), 2008, Vol. 28:128-136.
  13. Neelkanth and Ray A.K., “Modeling of Paper Machine Calenders” International Journal of Hybrid Computational Intelligence(IJHCI), 2008, Vol. 1, Issue 1:87-100.
  14. Bhargava, R, S. Khanam, Mohanty,B. and Ray A.K. “Simulation of flat falling film evaporation system for concentration of black liquor” Computers and Chemical Engineering, 2008  
  15. Bala, P.K., “Mining Quantitative Association Rule for Intelligent Business Decision, Enterprise Systems and Business Process Management: Global Best Practices”, MacmillanAdvanced Research Series, 2008, pp. 187-201.
  16. Bala, P.K., “A technique for mining generalized quantitative association rules for retail inventory management, International Journal of Business Strategy, vol. 8, no. 2, 2008, pp. 114-127.
  17. Bala, P.K., “Identification of purchase dependencies in retail sale”, International Journal of Strategic Management, 2008, Vol. 8, Issue 2:75-83.
  18.  Bala, P.K., “Mining Association Rules for Selective Inventory Control”, Journal of Academy of Business & Economics, 2008, Vol. 8, Issue 2:75-85.
  19. Bala, P.K, Banerjee, S., “Multi-Item Inventory Modeling with Level and Price Dependency”, International Journal of Business Strategy, 2008, Vol. 8, Issue 1:43-52.
  20.  Bala, P.K., “Retail Inventory Management with Purchase Dependencies”, Engineering Letters, 2008, Vol. 16, Issue 4:545-549.
  21. Goyal RK, Tiwari AN, Mulik UP, et al., “Thermal expansion behaviour of high performance peek matrix composites”, Journal Of Physics D-Applied Physics, 2008, Vol.41, Issue 8:085403.   
  22. Singh, S. P., “A comparison of different methods of paper surface smoothness evaluation”, BioResources, 2008, Vol. 3, Issue 2:503-516.

 

Year 2007

  1. Chauhan VS, Singh SP, Bajpai PK, “Fiber loading of hardwood pulp by in-situ precipitation of aluminosilicate” Bioresources, 2007, Vol. 2, Issue 4:560-571.   
  2. Garg M, Gautam AK, Singh SP, “Recycling potential of saccharum munja pulp” Cellulose Chemistry And Technology, 2007, Vol.41, Issue 7-8:473-481.
  3. Dutt D, Tyagi CH, Upadhyay JS, “Hygienic and cost efficient technology for the development of tea bag paper from indigenous raw materials”, Cellulose Chemistry and Technology, 2007, Vol. 41, Issue 4-6:291-300.
  4. Dutt D, Garg AP, Tyagi CH, et al., “Bio-soda-ethanol-water (bio-sew) delignification of lignocellulosic residues of cymbopogon martini with phanerochaete chrysosporium”, Cellulose Chemistry and Technology, 2007, Vol.41, Issue 2-3:161-174.
  5. Dutt D, Tyagi CH, Malik RS, “Studies on effect of growth factor on morphological, chemical and pulp and paper making characteristics and its impact on fluff generation”, Indian Journal of Chemical Technology, 2007, Vol.14, Issue 6:626-634.
  6. Maharana T, Negi YS, Mohanty B, “Review article: recycling of polystyrene”, Polymer-Plastics Technology and Engineering, 2007, Vol.46, Issue 7:729-736.   
  7. Dutt D, Garg AP, Tyagi CH, et al., “Bio-alkaper and peroxide-alkali delignifications of solid waste of cymbopogon martini with phanerochaete chrysosporium”, Indian Journal of Chemical Technology, 2007, Vol.14, Issue 3:229-239.
  8. Singh SP, “Relationship of z-tensile strength with in-plane strength properties of paper”, Indian Journal of Chemical Technology, 2007, Vol.14, Issue 3:317-320.
  9. Bhargava, R. S. Khanam, B. Mohanty, and A.K. Ray, “Selection of optimal feed flow sequence for a  multiple effect evaporator system”,Computers & Chemical Engineering, 2007, www.elsevier.com/locate/Comp Chemical engineering
  10. Kumar Rajesh, A.K. Ray, S. Mukherjee, “Using A Neural Network System for Basis Weight Control-IETECH (International Engineering and Technology), Journal of Advanced Computations, 2007, Vol.-1, Issue 2: 74-78.
  11. Dutt D, Tyagi CH, Upadhyaya AK, et al., “Studies on use of lignocellulosic residues of palma rosa grass after steam distillation for the production of chemical grade pulp”, Indian Journal of Chemical Technology, 2007, Vol.14, Issue 4:389-399.
  12. Lal AK, Saini S, Mohan C, et al., “On the validity of series expansion being used for the position of a point on a roche equipotential” Astrophysics and Space Science, 2007, Vol. 310, Issue 3-4:317-320.
  13. Sharma A, Singh AK, “Corrosion study of steels in peracid bleach solutions”, Appita Journal, 2007, Vol. 60, Issue 4:333-337.  
  14. Sharma SC, Gupta S, Sharma C, et al., “Simulation of control loops of pulp bleaching section using distributed control system - an experimental study”, Journal of Scientific & Industrial Research, 2007, Vol.66, Issue 6:431-434.   
  15. Dutt D, Garg AP, Tyagi CH, et al., “Bio-delignification of lignocarbohydrates residues of cymbopogon martini with phanerochaete chrysosporium”, Journal of Scientific & Industrial Research, 2007, Vol.66, Issue 6:483-489.   
  16. Goyal RK, Tiwari AN, Mulik UP, et al., “Dynamic mechanical properties of al2o3/poly (ether ether ketone) composites” Journal of Applied Polymer Science, 2007, Vol.104, Issue 1:568-575.
  17. Goyal RK, Tiwari AN, Mulik UP, et al., “Effect of aluminum nitride on thermomechanical properties of high performance peek” Composites Part A-Applied Science and Manufacturing, 2007, Vol. 38, Issue 2:516-524.   
  18. Dutt, D., Tyagi, C. H., Upadhyaya, J.S. and Singh, S., “Development of specialty papers is an art: Playing cards base paper from Eucalyptus tereticornis, Leucaena leucocephala and Bambus aurandacea-part-XV”, IPPTA J., 2007, Vol. 19, Issue 3:153-155.
  19. Singh, V., Dutt, D., Swarnima and Tahiliyani, D., “Effect of metal ions on electrical insulation properties”, IPPTA J., 2007, Vol. 19, Issue 2:121-123.
  20. Shamim, A., Dutt, D., Upadhyaya, J. S., Tyagi, C. H. and Kumar, V.,“Bio-refining of chemical pulp– An attempt towards energy conservation, Papír a celulóza”, Journal of Czech Pulp and Paper Industry, 2007, Vol. 62, Issue 7-8:238-241.
  • Conference/Symposia/Seminars/Workshop (2007-2009)

  1. Verma Nitin, Bansal M.C., Kumar Vivek, Microbial Cellulases: Production ,Applications and Recent Approaches,57, International Conference on Challanging Environmental trends and Sustainable Environment (CETAS-2009)  held at Environmental Science and Enginerring Department,GJUS& T,Hisar on Feb 9-11 2009.
  2. Verma Nitin, Bansal M.C., Kumar Vivek, Pretreatment Technology:An approaches for effective utilization of lignocellulosic biomass,66-67, First Global Summit on Sustainable Development and Biodiversity(Gloss-2008) ,Raipur,held on Feb 7-9 2009.
  3. Juneja pradeep Kumar, Ray A.K.,and Mitra R- Various control strategies in industrial lime kiln process-a review- Proceedings on National Conference on Machine Intelligence(NCMI)-2008,August 22-23,2008 held at Gagadhri,Haryana, India,pp.249-253
  4. Juneja Pradeep Kumar , Ray, A.K.and Mitra R.-Artificial intelligence in lime kiln control-3rd International Conference on Advanced Computing and Communication Technologies(ICACCT-2008) between November 08-09,2008 held at Asia Pacific Institute of Information Technology SD India,Panipat, Haryana,India.
  5. Ray A.K. Multiple Control Loops and Beyond-Current Practice and Research Trends in Paper Mill- Proceedings on  “Advances in Chemical Engineering”-McMillan Advanced Research series February 27-28,2009, Patiala,pp. 38-41
  6. Kumar Rajesh , Ray A.K. and Mukherjee S.-Modeling and Control for pH of stock using Artificial Neural Network-ibid, pp.188-194
  7. Juneja Pradeep Kumar,Ray A.K. and Mitra R.-Modeling  deadtime in Consistency Process Dynamics in a paper mill. Ibid,pp.201-205
  8. Tyagi  Sanjay and Ray A.K.-Evaluation of efficiency of industrial brownstock washing process parameters by various methods ibid ,pp.319-327
  9. Ray A.K.,Tyagi Sanjay , Tomar Aditya, Agarwal, Vikash and Monga Prasan- Predicting Coating Colour Formulation by Draper Lawrence Design with TiO2 and Zirconium Sulphate ,ibid,pp.    328-338.
  10. Banavath  Hussen Naik, Bhardwaj, N.K. and Ray A.K.., Effect of refining on fibre charge of pulp, Proceedings on  PapAsia and International Trade Fair & conference on pulp and paper 2009 held at Chennai between 5th  Feb-7th Feb.,2009
  11. Kumar Mukesh and Ray A.K., Effect of Bed Depth on Solute Concentration of Sodium in Wash Liquor through Mathematical Modeling of Brown Stock Washer in Pulp & Paper Industry, Proceedings on “National Conference on Modern development in Engineering & Science”, Feb 27-28’ 2009
  12. Verma Nitin, Bansal M.C., Kumar Vivek, Growth and Morphological Studies of Trichoderma and Aspergillus and its coculture for effective utilization of lignocellulosic biomass” , 77-81,International Conference on Challanging Environmental trends and Sustainable Environment (CETAS-2009) held at Environmental Science and Enginerring Department,GJUS& T,Hisar on Feb 9-11 2009.
  13. Verma Nitin,  Kumar Vivek, Bansal M.C, Inducers in Cellulase Biosynthesis: A Review”,232-233,International Conference on Current Trends in Biotechnology and its Implications in Agriculture & Technology (ICB-2009),held at SVBPUA&T ,Meerut on Feb-19-21,2009.
  14. Verma Nitin, Bansal M.C., Kumar Vivek, Comparative Batch Growth Kinetic Studies of Cellulase Producing Fungal Strains under Submerged Cultivations,238, International Conference on Current Trends in Biotechnology and its Implications in Agriculture & Technology (ICB-2009) held at SVBPUA&T,Meerut on Feb-19-21,2009.
  15. Verma Nitin, Bansal M.C., Kumar Vivek, Aspergillus sp a potent bioremediation: Studies on pelleted form of morphological growth achieved by Aspergillus niger in submerged cultivation,Microcon-2009,held at Panjab University,Chandigarh on Mar,3-4,2009.
  16. 16.Verma Nitin, Kumar Vivek, Bansal M.C, Thermophilic microbes: Life in extreme environments and utility of their enzymes in process industries", Microcon-2009,held at Panjab University,Chandigarh on Mar,3-4,2009.
  17. 17.Verma Nitin, Bansal M.C., Kumar Vivek.,Growth and Morphological Studies of Agriculturally Important Trichoderma Strains in Submerged Conditions  and its Application in Agricultural Sectors.148-149, National Conference on Sustainable Agriculture and Horticulture Production held on Nov 28-30, 2008, organized by Doctor’s Agricutural and Horticultural Develpoment Society ,Lucknow.
  18. 18.Verma Nitin, Kumar Vivek, Bansal M.C, Growth Studies of Neurospra crassa for Effective Utilisation of Lignocellulosic Waste Biomass,126-131, National Conference on “Recent Advances in Waste Management, held at Department of Chemical Engineering, Institute of Technology ,Banaras Hindu University(BHU),Varanasi on Feb,20-21,2009.
  19. Ullhyan A, Ghosh U.K., A Sustainable Approach: Potentiality of Antagonistic Microbes and Leaf extract of Extract of botanicals on growth and Sclerotial Production of Sclerotium rolfsii sacc National conference on Eco-friendly Approaches in Sustainable Agriculture  and Horticulture Protection. November28-30, 2008. held at Amity University Lucknow Campus, Lucknow. pp126.
  20. Ullhyan A., Ghosh. U.K., Removal of 2,4 dichlorophenol by simultaneous adsorption and biodegradation using low cost adsorbent..Sovenier of International conference on microbial and biotechnology(CEASI) organized by Punjab University Chandigarh, 3-4 March 2009.
  21. Ghosh, M.K. andGhosh, U.K., A review on bacterial biofertilizers production technology applications and the overview of research findings, In souvenir and abstracts of International  Conference  on Current Trends in Biotechnology (ICB), U SVBP niversity of Agriculture and Technology, Meerut, Feb.19-21,2009.
  22. Ghosh, M.K. andGhosh, U.K., Role of Lactobacillus sp. as ecofriendly biopreservatives for food safety, In Proceedings of International Conference on Changing Environmental Trends and Sustainable Development (CETAS) at  Department of Environmental Science & Engineering, Guru Jambheshwar University of science and Technology, Feb. 9-11. (2009).
  23. Ghosh, M.K. andGhosh, U.K., Comparative batch growth kinetic studies  of pure cultures and cocultures of Lactobacillus sp. commercial strains in anaerobic submerged fermentation, In souvenir and abstracts of International Conference  on Current Trends in Biotechnology (ICB), SVBP University of Agriculture and Technology, Meerut ,Feb.19-21,2009.
  24. Ghosh, M.K. andGhosh, U.K., Biotechnological  and engineering aspects of  ecofriendly anaerobic bioprocesses, for paper mills, agroindustries and biohydrogen production, In Proceedings of International Conference on Changing Environmental Trends and Sustainable Development (CETAS) at  Department of Environmental Science & Engineering, Guru Jambheshwar University of science and Technology,Feb. 9-11(2009).
  25. Ghosh, U.K. andGhosh, M.K., Studies on utilization of Lactobacillus sp. in protection of agricultural and food products-A review, In souvenir and abstracts of International Conference  on Current Trends in Biotechnology (ICB), SVBP University of Agriculture and Technology, Meerut Feb.19-21,2009.
  26. Ghosh, M.K. andGhosh, U.K., Comparative batch growth kinetic studies  of cultures Lactobacillus strains in  mixed sugar containing media, In souvenir and abstracts of International Conference  on Microbial Biotechnology (MICROCON),organized by Microbial Biotechnology CEAST, Punjab University Chandigarh,March3-4(2009).
  27. Ghosh, M.K. andGhosh, U.K., Microbial degradation of phenols and chlorophenols: An overview of biochemical and molecular studies,In souvenir and abstracts of International Conference  on Microbial Biotechnology (MICROCON),organized by Microbial Biotechnology CEAST, Punjab University Chandigarh,March3-4(2009).
  28. Ghosh, M.K. and Ghosh, U.K., Comparative batch kinetic studies on growth and  acid formation of Lactobacillus sp. and utility of microbial lactic acid in ecofriendly biodegradable polylactic acid industry,In proceedings of National Conference On Recent Advances In Waste Management (RAWM), organized by Centre of Advanced Study, Department of Chemical Engineering  and Technology, Institute of Technology (IT) BHU, Varanasi,(UP) India, 217-221, 20-21Feb.2009 .
  29. Ghosh, M.K. and Ghosh, U.K., The studies on biodegradation and removal of phenols : Biotechnological and engineering aspects with special reference to pulp and paper mill processes(A review), In proceedings of National Conference On Recent Advances In Waste Management (RAWM), organized by Centre of Advanced Study, Department of Chemical Engineering  and Technology, Institute of Technology (IT) BHU, Varanasi,(UP) India,232-242, 20-21Feb.2009.
  30. Kumar, A.,Ghosh, M.K., Tyagi, C.H., Bhardwaj, N.K. and Ghosh, U.K., A review on paper mill pollutants: Sources, monitoring and controlling techniques and production of biogas from effluent of  paper mills, In proceedings of National Conference On Recent Advances In Waste Management (RAWM), organized by Centre of Advanced Study, Department of Chemical Engineering  and Technology, Institute of Technology (IT) BHU, Varanasi,(UP) India,479-488, 20-21Feb.2009
  31. 31.Verma Nitin, Bansal M.C., Kumar Vivek, Waste Paper Recycling with Cellulases : An Effective and Environmental Friendly Approaches for Solid Waste Management,118-125,National Conference on “Recent Advances in Waste Management” held at Department of Chemical Engineering, Institute of Technology ,Banaras Hindu University(BHU),Varanasi on Feb 20-21,2009.
  32. Lata S., Sharma, C., and Sijgh, A.K., Microbial induced corrosion of Engineering materials in the presence of Desulfovibrio desulfuricans 14th National Congress on Corrosion Control, Hyderabad, Sept., 18-20,2008.
  33. Ankita, Agarwal, V., Agarwal, R.C. and Singh, A.K. NiP and NiPPTFE Nanocomposite coating  on mild steel for corrosion and war resistance. Int. Conf. on Nanomaterials and Devices: Processing and Applications, Roorkee, Dec.11-13,2008.
  34. Pathak, P., Bhardwaj, N.K. and Singh, A.K., Potential Microbes and their enzymes in pulp & Paper Industry: An Overview, Int. Conf. on Microbial Biotechnology, Chandigarh, March 3-4,2009.
  35. Lata, S., Sharma, C.and Singh, A.K., Microbial Induced Corrosion on Industrial Materials Int. Conf. on Microbial Biotechnology, Chandigarh, March 3-4, 2009.
  36. Tyagi, C.H.Lal, Mohan and Dutt Dharm , Biobleaching of kraft pulp by fungal xylanase and its impact on bleach plant effluent, The 4th International conference on biomass for energy 22-24 sept, 2008 Kyiv, Ukraine. PP.V18(1-4)
  37. Dutt Dharm, Upadhyaya J.S. and Tyagi C.H. Studies on mitigation of pollution load by extended delignification and its impact on paper properties, Biobleaching of kraft pulp by fungal xylanase and its impact on bleach plant effluent, The 4th International Conference on biomass for energy 22-24 Sept., 2008 Kyiv, Ukraine, ppV19(1-4)
  38. R.B.Ram, Sudheer Kumar Shukla, Vivek Kumar, M.C.Bansal and Dharm Dutt, Application of water pinch technology for minimization of fresh consumption and wastewater generation in Indian paper industry, International Conference on water resources and management, 24-26 October,2008 BITS, Pilani (Raj).
  39. Shukla, Y.S. Negi, V. Kumar,S. Akhtar, Crystallization and Morphological Behavior of PEEK/Nano Talc Powder Nanocomposites, (Poster Presentation) Plast India-2009 (6-7 Feb., 2009) Hotel Intercontinental, New Delhi.
  40. P. Verma, N. Mehta and Y.S. Negi, Computational Modeling and Structure Property Prediction of High Performance Polyamides Based on 2,5-bis(4-carboxyphenyl)-3,4-diphenylthiophene and Aromatic Diamines, Int. Conf. on Polymer Processing Soc., Goa, organized by IIT Delhi and IIT Bombay,1-5 March, 2009.
  41. Y.S. Negi, R.K. Goyal and A.N. Tiwari, High Performance Poly (Ether-Ether-Ketone)/Aluminium Trioxide and Aluminium Nitride Based Micro and Nano Composites, 17th Int. Conf. on Composites or Nano Engg, ICCE-17, July 26-31, 2009, Hawaii, USA.
  42. Munjusha Rani, Anuja Agrawal, Yuvraj Singh Negi, Preparation and biodegradation studies on porous semi IPN beads of chitosan and amino acids, National seminar on new science origin at GKC, Yamuna Negar, Feb. 2010.
  43. A.K.Sharma, A.K.Singh, In-plant Test to assess corrosion resistance of Steel in Digester. Curie J. 2(3) 2009 16-22
  44. A.K.Sharma and A.K.Singh, Investigation on Digester Corrosion.  Corrosion Case Studies (Ed.: A Bhardwaj, S.Degan, N.Manohar Rao, R.P.Nagar) P 225-232 (2009) NACE Gateway India Section , Mumbai)
  45. Kumar Mukesh and Ray A.K., How a Mathematical Model of Brown stock Washing in Paper Industry can Solve the Problem of Environmental Degradation, Accepted for publication in proceedings of “International Seminar on Causes & Mitigation of Environmental Degradation of planet Earth with Special reference to Uttarakhand”, April 06-07, 2009.
  46. Juneja Pradeep Kumar , Ray A.K. and  Mitra  R.- Multivariable limekiln process automation in a process  industry; a challenging task”-Accepted in 13th World Multiconfernce on Systematics ,Cybernetics and Informatics( WMSCI,2009)to be held in Orlando , USA , on July  10-13,2009
  47. Ray A.K.,Mittal, Anuj ,Maheswari, Anuj , Johri Bhaskar –Bleaching of Rice Straw Pulp with various options for Oxygen Reinforcement in plant practice-Accepted in TAPPI Engineering,Pulping and Environmental Conference  held  Oct.11-14,2009 at the Memphis Cook Convention Center, Memphis, Tennessee,USA
  48. Ray A.K., and Karandhikar G.-“Delignification of Bagasse by Soda-Oxygen Process”- Accepted in TAPPI Engineering,Pulping and Environmental Conference  held  Oct.11-14,2009at the Memphis Cook Convention Center, Memphis, Tennessee,USA
  49. Neelkanth and A.K.Ray -Modelling and simulation of machine calenders in paper mill (Nip mechanics model),Proceedings of 13th Punjab Science Congress-Climate Change and Solutions, held between February 7-9,2010  at Punjab University, Chandigarh under the aegis of Punjab Academy of Sciences
  50. Mishra, Narayan Chandra,Principles and Applications of Tissue Engineering, ‘National Seminar on ‘Biotechnology for the 21st Century: New Horizons’, St. Aloysius’ College, Jabalpur, M.P., India, Dec. 18-19,2009.
  51. Sharma, C., Dinda, A. K., Mishra, N. C., Roy, P.,and Prashant C. K., Fabrication of composite tissue engineering scaffold, its characterization and biocompatibility studies,  National conference on Emerging Paradigms in Biochemical Engineering, Banaras Hindu university, Varanasi Oct. 9-10, 2009. Won best poster presentation award.
  52. Anupa ullhyan,U.K.Ghosh  “Phytoremediation a biological tool for detoxification of  cadmium”, National seminar on Environment and sustainable development organized by Guru Nanak dev university Amritser,  3-4 Nov. 2009.
  53. Anupa ullhyan,U.K.Ghosh  “Removal of 2-4, dichlorophenol by adsorption using agriculture waste as low cost adsorbent”, National seminar on Environment and sustainable development organized by Guru Nanak dev university Amritser,  3-4 Nov. 2009.
  54. Anupa ullhyan,U.K.Ghosh  “Investigation on reduction of color from pulp and paper effluent using agriculture waste material”, National seminar on Environment and sustainable development organized by Guru Nanak dev university Amritser,  3-4 Nov. 2009.
  55. Ghosh, M.K. and Ghosh, U.K., Utilization of wheat bran agroindustrial waste  in solid state fermentative production of lactic acid through pure and isolated strains of Lactobacilli, In proceedings of EDECR-2010, National Conference on Environmental Protection: Effects, Challenges  and Remedies, pp 122-123, Feb. 25-27,2010, JCDM College of Engineering, Sirsa, Haryana.
  56. Ghosh, M.K. and Ghosh, U.K., Comparative studies on bacterial production of lactic acid in solid state fermentation through pure cultures and coculture of Lactobacilli utilizing potato starch with  sugarcane bagasse bed material, In proceedings of EDECR-2010, National Conference on Environmental Protection: Effects, Challenges  and Remedies, pp 132-134, Feb. 25-27,2010, JCDM College of Engineering, Sirsa, Haryana.
  57. Ghosh, M.K. and Ghosh, U.K., Utilization of  sugarcane bagasse as bed material in solid state production  of lactic acid  through  pure cultures  and coculture  of Lactobacilli, In proceedings of  International Conference on Emerging  Technologies in Environmental Science and Engineering , pp1244-1247, Oct. 26-28, 2009,Department of  Civil  Engineering, Aligarh Muslim University, Aligarh, (India).
  58. Ghosh, M.K. and Ghosh, U.K., Comparative studies onsolid state  production of lactic acid through pure cultures and coculture of Lactobacilli utilizing sugarcane bagasse bed material, In proceedings of Recent Advances in Environmental Protection (RAEP), pp893-897, Dec. 17-19, 2009,  Chemistry Department St.  Johns College , Agra.
  59. Ghosh, M.K. and Ghosh, U.K., Utility of wheat bran  an agroindustrial waste as bed material in solid state fermentative production of lactic acid through Lactobacilli, In abstract book  of  National Seminar on Environment and sustainable development,Nov.3-4, 2009, Department of  Botanical and Environmental Sciences, Guru Nanak Dev University , Amritsar (Punjab).
  60. Ghosh, M.K. and Ghosh, U.K., Ecofriendly bacterial biofertilizers: Production technology, applications and the research findings, In abstract book of  International Conference on Emerging  Technologies in Environmental Science and Engineering , pp126-127, Oct. 26-28, 2009,Department of  Civil  Engineering, Aligarh Muslim University, Aligarh, (India).
  61. Ghosh, M.K. and Ghosh, U.K., Biotechnological approaches in degradation and minimization of phenolic compounds: potential applications in pulp and paper industry, In abstract book of  International Conference on Emerging  Technologies in Environmental Science and Engineering , pp11, Oct. 26-28, 2009,Department of  Civil  Engineering, Aligarh Muslim University, Aligarh, (India).
  62. Verma Nitin, Bansal M.C.,Kumar Vivek, Comparative Batch Growth Kinetic Studies of Trichoderma,Aspergillus and Neurospora strains under Submerged Cultivations,892-897, Proceedings of International conference on Emerging Technologies in Environmental Science and Engineering ,held on Oct 26-28,2009,organized by Aligarh Muslim University (AMU)India in collaboration with Toledo University,U.S.A.
  63. Verma Nitin, Kumar Vivek, Bansal M.C., Various Inducers involved in environmental viable cellulase  biosynthesis ,1690-1695,Proceedings of International conference on Emerging Technologies in Environmental Science and Engineering ,held on Oct 26-28,2009,organized by Aligarh Muslim University (AMU)India in collaboration with Toledo University, U.S.A.
  64. Verma Nitin, Kumar Vivek, Bansal Mukesh C, Studies on development of biofilm on muslin cloth  by Aspergillus niger,880-884,Proceedings of International Conference on Recent Advances in Environment Protection(RAEP-2009),held on Dec 17-19,2009 at Agra, India.
  65. Verma Nitin, Bansal M.C.,Kumar Vivek., Bagasse hydrolysate,Utility in Trichoderma growth and production system,885-889,Proceedings of International Conference on Recent Advances in Environment Protection(RAEP-2009),held on Dec 17-19,2009 at,Agra,India.
  66. Verma Nitin, Kumar Vivek, Bansal Mukesh C,Utility of egg shell wastes in environmentally important Neurospora crassa growth system,Proceedings of International Conference on Recent Advances in Environment Protection(RAEP-2009),held on Dec 17-19,2009 at Agra,India.
  67. Verma Nitin, Kumar Vivek, Bansal M.C, Effect of mutagens on growth of environmentally important Neurospora and Aspergillus strains,148-150, Proceedings of National conference on environmental degradation:Effects ,controls and remedies(EDECR-2010),held on Feb-25-27 at Sirsa(Haryana),India.
  68. Verma Nitin,Bansal M.C,Kumar Vivek, Effect of wheat bran particle size and their combinations on the growth and production system of Aspergillus niger,124-125, Proceedings of National conference on environmental degradation:Effects ,controls and Mandal S.K.,,Bansal M.C.,Kumar Vivek.,Verma Nitin,Studies on effect of pretreated starch on Aspergillus niger system,National Conference on Environment and Sustainable Development,held on Nov,3-4,2009, organized by Guru Nanak Dev University(GNDU),Amritsar,India.
  69. Verma Nitin, Bansal M.C.,Kumar Vivek, Utilization of wheat straw hydrolyzates in Trichoderma reesei growth and production system, National Conference on Environment and Sustainable Development,held on Nov,3-4,2009, organized by Guru Nanak Dev University(GNDU),Amritsar,India.
  70. Nangia, V.K., Khanna, A., Loan repayment in microfinance – An analytical study, International conference on Global Issues in Business and TGechnology, Organized by MTMI, USA in Indore, Dec.22-24,2009. The paper is published in MTMI journal  Review of Business & Technology Research Vol.2 No.1 (2009).pp1-7
  71. Singh, R., Pathak, P., and Bhardwaj, N. K., Enzymatic refining of pulps: An Overview, International conference on Microbial Technology MICROCON 2009: Microbes for Sustainability of Mankind, Punjab University, Chandigarh, 2009.
  72. Pathak, P., Bhardwaj, N. K., and Singh, A. K., Potentials of the microbes and their enzymes in pulp and paper industry: An overview. International conference on Microbial Technology MICROCON 2009: Microbes for Sustainability of Mankind, Punjab University, Chandigarh, 2009.
  73. P.Pathak, N.K.Bhardwa, A.K.Singh, Deinking of xerographic waste paper Paperex,2009 Delhi, December 4-7, 2009
  74. Prashar and A.K.Singh, Corrosion and Wear Resistance Coating of Ni-P and Ni-P-PTFE Nanocomposites, Int. Conference & Expo on Corrison CORCON 2009, Mumbai 29-Oct. 1,2009
  75. S.Lata, C.Sharma, A.K.Singh, Effect of Host Media on SRB induced Corrosion on Steels, Int. Conference & Expo on Corrosion CROCON 2009 Mumbai Sept.29-Oct.1,2009
  76. S.Lata, C.Sharma A.K.Singh, Impact of SRB induced microbial corrosion on engineering materials, EUROCORR 2009, Nice, France , Sept 6-10, 2009
  77. Poonam, Vimala,Y., Dutt, D., Ecoconservation of Solanum xanthocarpum (Endangered in western U.P. Belt) through micropropagation, International Conference on  Emerging Technologies in Environmental Science and Engineering, Aligarh Muslim university, Aligarh Oct. 26-28, 2009
  78. Maharana T., Mohanty B., and Negi Y.S.; Synthesis of poly(lactic acid) by Melt Polycondensation and Their Characterizations; Poster Presentation“Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  79. C. Meghashyam, Abhinav Kumar, P.V. Ravi Teja, Arvind Kumar, R. Godiyal and Y.S. Negi, Cellulose as a Smart Materail for Flexible Micro-Device Applications; Poster Presentation“ Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  80. Ch. Viswa Santhi, J.W. Dadge, R.C. Aiyer and Y.S. Negi, Free Standing Film Material Based on m-Nitroaniline Doped Polyether Sulfone for Frequency Doubling Applications, Poster Presentation Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  81. Ch. Viswa Santhi, K. Mangal, Meghshyam, M.S. Rawat, J.W. Dadge, R.C. Aiyerand Y.S. Negi, Preparation and Characterization of Bulk and Optoelectronic Properties of m-NA Doped PVA Films, Poster Presentation Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  82. R. Malkapuram, V. Kumar and Y.S. Negi, Effect of Fiber Pretreatment on the Performance of Pine Needle Fiber Reinforced Polypropylene Composites; Poster Presentation Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  83. D. Mekap, M.F. Ansari and Y.S. Negi, Bionanotechnology- The Confluence of Molecular Biology and Molecular Nanotechnology; Poster Presentation Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  84. P.V. Adhyapak, A. Ambekar, K. Chikhalikar, J. W. Dadge, R. C. Aiyer, D.P. Amalnerkar, and Y.S. Negi, Preparation of Polystyrene Coated m-NA Single Crystals and Their NLO Properties; Poster Presentation Asian Polymer Association, Int. Conf. POLY-08” January 28th – 31st, 2008, IIT Delhi, India.
  85. Goyal RK, Subhangi SR, Negi YS, Mulik UP, Aiyer RC.Preparation and Properties of Guest-Host System Based on 2-Methyl-4-nitroaniline and Polyvinyl alcohol, Accepted in International Conference on Advanced Materials (IUMRS / ICAM-March, 2007) Bangalore.
  86. Goyal RK, Tiwari AN, Mulik UP, Negi YS. Novel High Performance Polymer Matrix Composites For Electronics Substrates, Accepted in International Conference on Advanced Materials (ICAM-March, 2007) Bangalore.
  87. Maharana T., Mohanty B., Ray A.K. and Negi Y.S.; Physico-Thermal and Temperature Dependent Computational Thermal Kinetic Studies of Poly (Lactic Acid); ICAPP 2007 – The 2nd International Conference on Advances in Petrochemicals and Polymers June 25th – 28th, 2007, Bangkok, Thailand.
  88.  Ch. Viswa Santhi, Maharana T, Dadge JW, Aiyer RC,and Negi YS. Novel Free Standing Film Material Based on m-Nitroaniline Doped Polyether Sulfone for Frequency doubling Applications;ICAPP 2007 – Accepted in the 2nd International Conference on Advances in Petrochemicals and Polymers 2007, Bangkok, Thailand.
  89. Goyal RK, Subhangi SR, Negi YS, Mulik UP, Aiyer RC.Preparation and Properties of Guest-Host System Based on 2-Methyl-4-Nitroaniline and Polyvinyl Alcohol, 10th Int. Conf. on Advanced Materials (IUMRS-ICAM 2007), Organized by MRSI, IISc and JNCASR Bangalore, October 8-13, 2007.
  90. Goyal RK, Tiwari AN, Mulik UP, Negi YS. Novel High Performance Polymer Matrix Composites for Electronics Substrates (ORAL), 10th Int. Conf. on Advanced Materials (IUMRS-ICAM 2007), Organized by MRSI, IISc and JNCASR Bangalore, October 8-13, 2007.